This document references:
ASME B30.10 - Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
Published by ASME
on
November 21, 2019
SCOPE OF ASME B30.10 Volume B30.10 includes provisions that apply to the fabrication, attachment, use, inspection, and maintenance of hooks shown in Chapters 10-1 and 10-2 used for load handling...
This document references:
ASME B30.12 - Handling Loads Suspended From Rotorcraft
Published by ASME
on
January 1, 2011
SCOPE EXCLUSIONS Any exclusion of, or limitations applicable to the equipment, requirements, recommendations or operations contained in this Standard are established in the affected volume's scope....
This document references:
ASME B30.26 - Rigging Hardware
Published by ASME
on
October 7, 2015
Volume B30.26 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of detachable rigging hardware used for load handling activities in conjunction...
This document references:
ASME B30.20 - Below-the-Hook Lifting Devices
Published by ASME
on
July 25, 2018
Volume B30.20 includes provisions that apply to the marking, construction, installation, inspection, testing, maintenance, and operation of below-the-hook lifting devices, other than components...
This document references:
ASME B30.10 - Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
Published by ASME
on
November 21, 2019
SCOPE OF ASME B30.10 Volume B30.10 includes provisions that apply to the fabrication, attachment, use, inspection, and maintenance of hooks shown in Chapters 10-1 and 10-2 used for load handling...
This document references:
ASME B30.12 - Handling Loads Suspended From Rotorcraft
Published by ASME
on
January 1, 2011
SCOPE EXCLUSIONS Any exclusion of, or limitations applicable to the equipment, requirements, recommendations or operations contained in this Standard are established in the affected volume's scope....
This document references:
ASME B30.20 - Below-the-Hook Lifting Devices
Published by ASME
on
July 25, 2018
Volume B30.20 includes provisions that apply to the marking, construction, installation, inspection, testing, maintenance, and operation of below-the-hook lifting devices, other than components...
This document references:
ASME B30.23 - Personnel Lifting Systems Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
Published by ASME
on
December 16, 2016
The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement related...
This document references:
ASME B30.26 - Rigging Hardware
Published by ASME
on
October 7, 2015
Volume B30.26 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of detachable rigging hardware used for load handling activities in conjunction...
This document is referenced by:
UFC 3-560-01 - OPERATION AND MAINTENANCE: ELECTRICAL SAFETY
Published by UFC
on
July 24, 2017
This UFC provides safety requirements and guidance for anyone working on or near electrical components rated at 50 volts or above in facilities and related infrastructure. The scope includes...
This document is referenced by:
IEEE C57.12.34 - Requirements for Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers, 10 MVA and Smaller; High-Voltage, 34.5 kV Nominal System Voltage and Below; Low-Voltage, 15 kV Nominal System Voltage and Below
Published by IEEE
on
September 3, 2015
This standard covers certain electrical, dimensional, and mechanical characteristics and takes into consideration certain safety features of three-phase, 60 Hz, liquid-filled, self-cooled,...