loading
IEEE CABLE MODEMS - CABLE MODEMS: TECHNOLOGIES AND APPLICATIONS
IEEE
A description is not available for this item.
DS/EN IEC 62680-1-3 - Universal serial bus interfaces for data and power – Part 1-3: Common components – USB Type-C® Cable and Connector Specification
March 29, 2021 - DS

IEC 62680-1-3:2021 defines the USB Type-C™ receptacles, plug and cables. The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and...

IEC 62680-2-2 - Universal serial bus interfaces for data and power - Part 2-2: Micro-USB Cables and Connectors Specification, Revision 1.01
September 1, 2015 - IEC

General USB has become a popular interface for exchanging data between cell phone and portable devices. Many of these devices have become so small it is impossible to use standard USB components as defined in the USB 2.0 specification. In addition the durability requirements of...

ACI COLLECTION SET USB - 2021 USB ACI Collection of Concrete Codes, Specifications, and Practices
January 1, 2021 - ACI

CATS Abstract: The ACI Collection of Concrete Codes, Specifications, and Practices is the most comprehensive concrete reference set available. It contains all of the widely used ACI concrete and masonry code requirements, specifications, guides and reports. - The largest, single source of concrete...

IEC 62680-1-3 - Universal serial bus interfaces for data and power – Part 1-3: Common components – USB Type-C Cable and Connector Specification
February 1, 2021 - IEC

This specification is intended as a supplement to the existing USB 2.0, USB 3.2, USB4™ and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is...

USCAR30-1 - PERFORMANCE SPECIFICATION FOR AUTOMOTIVE UNIVERSAL SERIAL BUS (USB) CONNECTION SYSTEM
July 10, 2023 - SAE International

Procedures included within this specification are intended to cover performance testing at all phases of development, production, and field analysis of any USB cable assemblies and associated connections that constitute the electrical connection systems between the consumer peripheral...

CEI EN 62680-1-3 - Universal serial bus interfaces for data and power Part 1-3: Common components - USB Type-CTM Cable and Connector Specification
April 1, 2018 - CEI

This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided...

CEI EN 62680-2-2 - Universal Serial Bus interfaces for data and power Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14)
August 1, 2016 - CEI

Intended Audience/Scope Cell phone and Portable Devices have become so thin that the current Mini-USB does not fit well within the constraints of future designs. Additional requirements for a more rugged connector that will have durability past 10 000 cycles and still meet the USB 2.0...

DS/EN 62680-2-2 - Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14)
January 7, 2016 - DS

USB has become a popular interface for exchanging data between cell phone and portable devices. Many of these devices have become so small it is impossible to use standard USB components as defined in the USB 2.0 specification. In addition the durability requirements of the...

USCAR30 - PERFORMANCE SPECIFICATION FOR AUTOMOTIVE UNIVERSAL SERIAL BUS (USB) CONNECTION SYSTEM
July 4, 2022 - SAE International

Procedures included within this specification are intended to cover performance testing at all phases of development, production, and field analysis of any USB cable assemblies and associated connections that constitute the electrical connection systems between the consumer peripheral...

CEI EN 62680-2 - Universal serial bus interfaces for data and power Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01
November 1, 2014 - CEI

General USB has become a popular interface for exchanging data between cell phone and portable devices. Many of these devices have become so small it is impossible to use standard USB components as defined in the USB 2.0 specification. In addition the durability requirements of...

CEI EN IEC 62680-1-3 - Universal serial bus interfaces for data and power Part 1-3: Common components - USB Type-C Cable and Connector Specification
January 1, 2019 - CEI

This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided...

DS/EN 62680-2 - Universal serial bus interfaces for data and power - Part 2: Universal serial bus - Micro-USB cables and connectors specification, revision 1.01
January 16, 2014 - DS

Cell phone and Portable Devices have become so thin that the current Mini-USB does not fit well within the constraints of future designs. Additional requirements for a more rugged connector that will have durability past 10,000 cycles and still meet the USB 2.0 specification for...

ACGIH WB-034-USB - Current Topics for Managing Occupational Heat Stress - WEBINAR USB
January 1, 2018 - ACGIH
A description is not available for this item.
ACGIH WB-035-USB - Occupational Aspects of New Lighting Technologies - WEBINAR USB
January 1, 2018 - ACGIH
A description is not available for this item.
IEC 62680-2 - Universal serial bus interfaces for data and power – Part 2: Universal serial bus – Micro-USB cables and connectors specification, revision 1.01
September 1, 2013 - IEC

General USB has become a popular interface for exchanging data between cell phone and portable devices. Many of these devices have become so small it is impossible to use standard USB components as defined in the USB 2.0 specification. In addition the durability requirements of...

DS/EN 62680-1-3 - Universal serial bus interfaces for data and power – Part 1-3: Universal Serial Bus interfaces – Common components – USB Type-CTM cable and connector specification
November 28, 2016 - DS

IEC 62680-1-3:2016(E) defines the USB Type-C™ receptacles, plug and cables. It defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the...

DIN EN 62680-1-3 - Universal serial bus interfaces for data and power - Part 1-3: Universal Serial Bus interfaces - Common components - USB Type-CTM cable and connector specification (IEC 62680-1-3:2016); English version EN 62680-1-3:2016
January 1, 2018 - DIN

This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided...

ACI MCP SET USB - MANUAL OF CONCRETE PRACTICE USB
January 1, 2017 - ACI
A description is not available for this item.
Advertisement