loading
API 4011 - DOMESTIC REFINERY EFFLUENT PROFILE
September 1, 1968 - API

Introduction U.S. petroleum refiners have consistently reported water pollution abatement technology and waste control practices in order that this type of information will be readily available for all interested parties both within and outside the oil industry (1 thru 5). The nationwide effort to...

Recent Advances in Decolorization and Degradation of Dyes in Textile Effluent by Biological Approaches
October 7, 2019 - CRC

Recent Advances in Decolorization and Degradation of Dyes in Textile Effluent by Biological Approaches outlines various eco-friendly, cost effective methods for removal of toxic textile dyes. Large amounts of dye are unbound and released into the environment due to inefficient dyeing...

NSF 418 - Effluent Filters - Field Longevity Testing
April 2, 2014 - NSF

This Standard provides site selection, auditing, and methods for evaluating the field performance as it relates to longevity of septic tank effluent filters. Only septic tank effluent filters that are certified in accordance with the current version of NSF/ANSI 46 may be certified...

Handbook of Textile Effluent Remediation
June 18, 2018 - CRC

Nowadays, textile units utilize a number of dyes, chemicals, reagents, and solvents to impart the desired quality to fabrics, and generate a substantial quantity of effluents/contaminants, which cause severe environmental problems if disposed of without proper treatment. In view of several...

J1794_201108 - SAE Restraint Systems Effluent Test Procedure
August 29, 2011 - SAE International

This SAE Recommended Practice describes a method to collect, identify, and quantify effluent resulting from deployment of in-vehicle stored energy restraint systems. Deployment and collection is completed in a 2.83 m 2x (100 ft 2x ) chamber. This procedure is written as a guideline for the...

ASTM D7938-21 - Standard Practice for Sampling of C-14 in Gaseous Effluents
December 15, 2021 - ASTM International

5.1 This practice was developed4 for the purpose of sampling gaseous effluent streams from a facility that releases 14C in either organic or inorganic forms. 5.1.1 For many years 14C was not included in gaseous and liquid effluent measurements used for effluent dose...

ASTM D7938-15 - Standard Practice for Sampling of C-14 in Gaseous Effluents
December 15, 2015 - ASTM International

5.1 This practice was developed4 for the purpose of sampling gaseous effluent streams from a facility that releases 14C in either organic or inorganic forms. 5.1.1 For many years 14C was not included in gaseous and liquid effluent measurements used for effluent dose...

Pulp & Paper Mill Effluent Environmental Fate & Effects
September 1, 2004 - DESTECH

In recent years, concerns about the fate and effects of pulp and paper mill effluents on the environment have emerged, and countries throughout the world are focusing attention on the implementation of regulatory and monitoring programs. In response, the industry has begun to implement a...

NCRP RPT 169 - Design of Effective Radiological Effluent Monitoring and Environmental Surveillance Programs (2010)
January 1, 2010 - NCRP

This Report is intended to support the design and operation of integrated radiological effluent monitoring and environmental surveillance. Performing monitoring and surveillance as a combined program allows each element to contribute its own strengths, with a built-in system for checking the...

NACE RP0180 - Cathodic Protection of Pulp and Paper Mill Effluent Clarifiers
June 1, 1980 - NACE

This standard presents accepted practices for the cathodic protection of those metallic components of clarifiers that are in contact with pulp and paper mill effluent. The provisions of this standard should be applied under the direction of competent persons who are qualified to engage in...

DS/ISO/TR 13387-5 - Fire safety engineering - Part 5: Movement of fire effluent
April 5, 2000 - DS

This part of ISO/TR 13387 is intended to provide guidance to designers, regulators and fire safety professionals on the use of engineering methods for the prediction of movement of fire effluents within and out of a building.

SEMI F5 - GUIDE FOR GASEOUS EFFLUENT HANDLING
SEMI
A description is not available for this item.
Guidelines for Pressure Relief and Effluent Handling Systems
April 1, 2017 - WILEY

Providing in-depth guidance on how to design and rate emergency pressure relief systems, Guidelines for Pressure Relief and Effluent Handling Systems incorporates the current best designs from the Design Institute for Emergency Relief Systems as well as American Petroleum Institute (API)...

ASTM E1440-91(2004) - Standard Guide for Acute Toxicity Test with the Rotifer Brachionus
April 1, 2004 - ASTM International

1.1 This guide describes procedures for obtaining laboratory data concerning the acute toxicity of chemicals and aqueous effluents released into fresh, estuarine, or marine waters. Acute toxicity is measured by exposing Brachionus newly hatched from cysts to a series of toxicant...

ASTM E1440-91(1998) - Standard Guide for Acute Toxicity Test with the Rotifer Brachionus
March 10, 1998 - ASTM International

1.1 This guide describes procedures for obtaining laboratory data concerning the acute toxicity of chemicals and aqueous effluents released into fresh, estuarine, or marine waters. Acute toxicity is measured by exposing Brachionus newly hatched from cysts to a series of toxicant...

ASTM E1440 - Standard Guide for Acute Toxicity Test with the Rotifer Brachionus
September 15, 1991 - ASTM

This guide describes procedures for obtaining laboratory data concerning the acute toxicity of chemicals and aqueous effluents released into fresh, estuarine, or marine waters. Acute toxicity is measured by exposing Brachionus newly hatched from cysts to a series of toxicant...

ISO TS 12828-3 - Validation method for fire gas analysis — Part 3: Considerations related to interlaboratory trials
February 1, 2020 - ISO

This document describes tools and gives guidance concerning interlaboratory trials related to fire effluent analyses. It explains the relative contributions from the physical fire model and analytical techniques to evaluate trueness and fidelity. It also explains the difficulties involved...

ASTM D3696 - Standard Practice for Evaluating an Effluent for Flavor Impairment to Fish Flesh
October 10, 2000 - ASTM

1. Scope 1.1 This practice describes procedures for determining the potential of an effluent to cause flavor impairment of fish flesh. Fish can be exposed to effluent either caged at contaminated sites adjacent to a discharge, or to dilutions of an effluent in a laboratory....

ASTM D3696-00 - Standard Practice for Evaluating an Effluent for Flavor Impairment to Fish Flesh (Withdrawn 2006)
October 10, 2000 - ASTM International

1.1 This practice describes procedures for determining the potential of an effluent to cause flavor impairment of fish flesh. Fish can be exposed to effluent either caged at contaminated sites adjacent to a discharge, or to dilutions of an effluent in a laboratory. Depending...

DS/EN 60761-4 - Equipment for continuous monitoring radioactivity in gaseous effluents - Part 4: Specific requirements for iodine monitors
July 19, 2005 - DS

This part of IEC 60761 is applicable to equipment intended for simultaneous, delayed or descrete sequential measurement of radioactive iodine in all forms. When the effluent is sampled for measurement, iodine bound on aerosols is generally collected on a prefilter which should be analyzed...

Advertisement