loading
ISO 8693 - Tools for moulding - Flat ejector pins
September 15, 2011 - ISO

This International Standard specifies the dimensions and tolerances, in millimetres, of flat ejector pins which are used in compression and injection moulds and in die casting dies. It also gives material guidelines and hardness requirements, and specifies the designation of flat...

ISO 8694 - Tools for moulding - Shouldered ejector pins
September 15, 2011 - ISO

This International Standard specifies the dimensions and tolerances, in millimetres, of shouldered ejector pins with cylindrical head which are used in compression and injection moulds and in die casting dies. It also gives material guidelines and hardness requirements, and specifies...

DIN ISO 8693 - Tools for moulding - Flat ejector pins (ISO 8693:2011)
July 1, 2012 - DIN

This International Standard specifies the dimensions and tolerances, in millimetres, of flat ejector pins which are used in compression and injection moulds and in die casting dies. It also gives material guidelines and hardness requirements, and specifies the designation of flat...

ISO 6751 - Tools for moulding — Ejector pins with cylindrical head
September 15, 2011 - ISO

This International Standard specifies the dimensions and tolerances, in millimetres, of ejector pins with cylindrical head which are used in compression and injection moulds and in die casting dies. It also gives material guidelines and hardness requirements, and specifies the...

JIS B 5103 - Ejector Pins for Moulds
March 20, 2003 - JSA
A description is not available for this item.
BS 7564-7 - Tools for Moulding Part 7: Shouldered Ejector Pins
May 1, 1992 - BSI

Dimensions for shouldered ejector pins used mainly in the die-casting, plastics and rubber industries.

BS 7564-6 - Tools for Moulding Part 6: Flat Ejector Pins
May 1, 1992 - BSI

Dimensions for flat ejector pins used mainly in the die-casting plastics and rubber industries.

DIN 1530-1 - Tools for moulding - Part 1: Ejector pins with cylindrical head
November 1, 2017 - DIN

Diese Norm gilt für Auswerferstifte mit zylindrischem Kopf zum Auswerfen von Formteilen aus Press-, Spritzgieß- oder Druckgießwerkzeugen. Für Druckgießwerkzeuge sind die Auswerferstifte vorwiegend aus Warmarbeitsstahl (WAS) vergütet und nitriert. Für Press- und Spritzgießwerkzeuge sind...

DIN 1530-2 - Tools for moulding - Part 2: Shouldered ejector pins
November 1, 2017 - DIN
A description is not available for this item.
DIN 1530-3 - Tools for moulding - Part 3: Ejector pins with conical head
November 1, 2017 - DIN
A description is not available for this item.
JIS B 5114 - Shouldered ejector pins for moulds
March 20, 2003 - JSA
A description is not available for this item.
JIS B 5121 - Flat ejector pins for moulds
March 20, 2003 - JSA
A description is not available for this item.
BS ISO 8693 - Tools for moulding - Flat ejector pins
September 30, 2011 - BSI
A description is not available for this item.
BS ISO 8694 - Tools for moulding - Shouldered ejector pins
September 30, 2011 - BSI
A description is not available for this item.
JIS B 5108 - Ejector Pins of Moulds for Plastics
March 1, 1995 - JSA
A description is not available for this item.
ISO FDIS 8693 - TOOLS FOR MOULDING - FLAT EJECTOR PINS
ISO
A description is not available for this item.
ISO FDIS 8694 - TOOLS FOR MOULDING - SHOULDERED EJECTOR PINS
ISO
A description is not available for this item.
BS 7564-5 - Tools for Moulding Part 5: Ejector Pins with Cylindrical Head - Dimensions
April 1, 1992 - BSI

Dimensions of ejector pins used mainly in pressure die casting dies and in mould bases for the rubber and plastic industries.

BS ISO 6751 - Tools for moulding - Ejector pins with cylindrical head
September 30, 2011 - BSI
A description is not available for this item.
ASTM B969/B969M-25 - Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
December 1, 2025 - ASTM International

This specification covers the material, chemical and mechanical requirements for aluminum-alloy castings produced by the thixocast, rheocast, semi-solid and squeeze casting processes. It does not apply to castings used in aerospace applications. Castings shall conform to the chemical composition...

Advertisement