loading
DS/CLC/TR 50484 - Recommendations for shielded enclosures
June 11, 2009 - DS

This Technical Report applies to shielded enclosures used for EMC testing which are to be validated according to the EN 50147 series of standards and the corresponding international standards. The object of this report is to give guidance to the selection of the shielding...

BS ISO 15080 - Nuclear facilities — Ventilation penetrations for shielded enclosures
May 31, 2019 - BSI
A description is not available for this item.
UFGS-08 56 46.20 20 - RADIO FREQUENCY SHIELDED ENCLOSURES, WELDED TYPE
August 1, 2011 - NAVY

NOTE: This guide specification covers the requirements for radio frequency shielded enclosures, welded type in sizes under 50 square meters 500 square feet.

MIL-HDBK-1195 - RADIO FREQUENCY SHIELDED ENCLOSURES
September 30, 1988 - NPFC

MIL-HDBK-1195 establishes specific criteria for the design and construction of shielded enclosures. The Design Manual 12.1, Electronic Facilities Engineering, establishes the general criteria for the design of Electronic Facilities. The Design Manual 12.02, High Altitude...

DS/CLC/TR 50481 - Recommendations on filters for shielded enclosures
June 11, 2009 - DS

This document was prepared to give users general advices on filtering solutions adopted in shielded enclosures. It is mainly a collection of hints derived from practical experience.This document is coordinated with EN 50147-1 and EN 50417-2.The document covers the frequency range DC...

CEI CLC/TR 50484 - Recommendations for shielded enclosures
November 1, 2010 - CEI

Questo Rapporto Tecnico si applica agli ambienti schermati utilizzati per misure di compatibilità elettromagnetica che devono essere valutati secondo la serie di Norme EN 50147 e intende fornire una guida per la selezione dei materiali schermanti e dei componenti più idonei. La gamma di frequenza...

DI-T-5160 - SHIELDED ENCLOSURE TEST REPORT
NPFC
A description is not available for this item.
BS PD CLC/TR 50484 - Recommendations for shielded enclosures
July 31, 2010 - BSI
A description is not available for this item.
ISO 11452-2 - Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Absorber-lined shielded enclosure
January 1, 2019 - ISO

This document specifies an absorber-lined shielded enclosure method for testing the immunity (offvehicle radiation source) of electronic components for passenger cars and commercial vehicles regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric...

IEEE 299 - Method for Measuring the Effectiveness of Electromagnetic Shielding Enclosures
September 15, 2006 - IEEE

This standard provides uniform measurement procedures for determining the effectiveness of electromagnetic (EM) shielding enclosures at frequencies from 9 kHz to 18 GHz (extendable down to 50 Hz and up to 100 GHz). The owner of the shielding enclosure shall provide the...

CEI CLC/TR 50481 - Recommendations on filters for shielded enclosures
November 1, 2010 - CEI

Questo documento fornisce informazioni e suggerimenti di carattere generale sulle metodologie di filtraggio adottate nelle camere schermate e anecoiche. Esso tratta la gamma di frequenze da DC a 40 GHz ed è coordinato con le due norme EN 50147-1 e EN 50417-2. Il presente documento sostituisce...

BS PD CLC/TR 50481 - Recommendations on filters for shielded enclosures
July 31, 2009 - BSI
A description is not available for this item.
NFGS 13093 - RADIO FREQUENCY SHIELDED ENCLOSURES, DEMOUNTABLE TYPE
NAVY
A description is not available for this item.
NTIS ADA116760 - STUDY OF EMI/RFI SEALS/SHIELDED-ENCLOSURE PERSONNE
NTIS
A description is not available for this item.
ASTM C740/C740M-13(2025) - Standard Guide for Evacuated Reflective Insulation In Cryogenic Service
April 1, 2025 - ASTM International

1.1 This guide covers the use of thermal insulations formed by a number of thermal radiation shields positioned perpendicular to the direction of heat flow. These radiation shields consist of alternate layers of a low-emittance metal and an insulating layer combined such that...

ASTM F2361-18(2024) - Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
May 1, 2024 - ASTM International

This guide provides the required basic ordering information for low voltage (1000 VAC or less, and up to and including motors of 500 hp) general-purpose (GP), commercial, universal, small and medium sized alternating current electric motors intended to drive common shipboard mechanical machinery...

Advertisement