loading
API THIRD PARTY NETWORK - Standard for Third Party Network Connectivity
November 1, 2007 - API

This standard provides guidance to members of the American Petroleum Institute (API) for implementing secure third-party connections between the information technology systems and network of two companies that have a business relationship and a common objective.

ASTM D7381-07(2026) - Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
March 1, 2026 - ASTM International

4.1 This practice is primarily intended for use by associations, third-party grading agencies, technical societies and other groups that develop national design standards and use recommendations for round timber piles. 4.2 This practice provides procedures for establishing compression...

ASTM D4360-11(2026) - Standard Specification for Methyl n-Amyl Ketone
January 1, 2026 - ASTM International

1.1 This specification covers methyl n-amyl ketone (98?% grade) for use in paint, varnish, lacquer, and related products. 1.2 For specific hazard information and guidance, see the supplier's Material Safety Data Sheet for materials listed in this specification. 1.3 The following applies to...

ASTM D4761-25 - Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
October 15, 2025 - ASTM International

1.1 These test methods cover the determination of the mechanical properties of stress-graded lumber and other wood-based structural materials. 1.2 These test methods appear in the following order: Section Bending edge-wise 6 Bending flat-wise: ?Center-point loading 7 ?Third-point...

ASTM D3338/D3338M-25 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
November 1, 2025 - ASTM International

1.1 This test method covers the estimation of the net heat of combustion (megajoules per kilogram or [Btu per pound]) of aviation gasolines and aircraft turbine and jet engine fuels in the range from 40.19?MJ/kg to 44.73?MJ/kg or [17?280?Btu/lb to 19?230?Btu/lb]. The precision for estimation of the...

ASTM D4362-25 - Standard Specification for Propane Thermophysical Property Tables
November 1, 2025 - ASTM International

This specification covers methyl n-amyl ketone (98 % grade) for use in paint, varnish, lacquer, and related products. The apparent specific gravity, color, distillation range, water, acidity, and purity of the material shall be tested to meet the requirements prescribed.

ASTM A917-25 - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
October 1, 2025 - ASTM International

1.1 This specification covers hot-rolled and cold-rolled steel sheet coated by the electrolytic process. Coatings can be comprised of pure metals or metal alloys. For specific coatings, refer to Specifications A879/A879M and A918. 1.2 The product shall be coated on one or both surfaces with equal...

ASTM B939-21(2025) - Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
September 1, 2025 - ASTM International

5.1 The radial crushing strength test is a destructive procedure used to determine a material strength characteristic of PM bearings and hollow cylindrical test specimens. These data can be used to grade, classify, and evaluate the materials. 5.2 The PM bearing Specifications B438 and B439...

Carrier-Grade VoIP, Third Edition
January 1, 2014 - MCGRAW

Leading-edge VoIP technologies, tools, and standards. Efficiently deliver voice, data, and multimedia content over today's always-on broadband networks with guidance from this fully updated resource. Carrier-Grade VoIP, Third Edition, shows how to set up and administer a highly...

ASTM D7917-25 - Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications
June 15, 2025 - ASTM International

5.1 This practice is intended for the application of online, full-flow, or bypass, or kidney loop sampling of wear debris via inductive sensors for gearbox and drivetrain applications. 5.2 Periodic sampling and analysis of lubricants have long been used as a means to determine overall machinery...

ASTM D5536-17(2023) - Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
February 1, 2023 - ASTM International

1.1 This practice offers two alternative physical sampling procedures: cruciform sampling and random sampling. The choice of procedure will depend upon the intended use for the test results, the resources available for sampling and testing, and the availability of existing data on the mechanical...

ASTM D8259/D8259M-21 - Standard Test Method for Rotary Wheel Testing (RWT) of Compacted Asphalt Mixtures
August 1, 2021 - ASTM International

1.1 This test method describes a procedure for testing the rutting and moisture susceptibility of asphalt specimens using the Rotary Wheel Tester (RWT). Superpave Gyratory Compactor (SGC) specimens (Test Method D6925) are wrapped, conditioned, submerged in water, and confined between three metal...

ASTM B939-21 - Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials
April 1, 2021 - ASTM International

5.1 The radial crushing strength test is a destructive procedure used to determine a material strength characteristic of PM bearings and hollow cylindrical test specimens. These data can be used to grade, classify, and evaluate the materials. 5.2 The PM bearing Specifications B438 and B439...

ASTM D3338/D3338M-20a - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
December 1, 2020 - ASTM International

1.1 This test method covers the estimation of the net heat of combustion (megajoules per kilogram or [Btu per pound]) of aviation gasolines and aircraft turbine and jet engine fuels in the range from 40.19?MJ/kg to 44.73?MJ/kg or [17?280?Btu/lb to 19?230?Btu/lb]. The precision for estimation of the...

Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology
February 17, 2020 - CRC

Highlighting the major economic and industrial changes in the lubrication industry since the first edition, Synthetics, Mineral Oils, and Bio-Based Lubricants: Chemistry and Technology, Third Edition highlights the major economic and industrial changes in the lubrication industry and...

ASTM F3470-20 - Standard Guide for A-UGV Capabilities
August 1, 2020 - ASTM International

5.1 This guide is intended to be used by manufacturers and users of A-UGVs: (1) to fully define capabilities of their A-UGV(s) or (2) to allow the standard requestor to describe the A-UGV capabilities required for the requested A-UGV to align with assigned task(s). A-UGVs that are covered within...

DS/EN IEC 61225 - Nuclear power plants – Instrumentation, control and electrical power systems – Requirements for static uninterruptible DC and AC power supply systems
March 31, 2020 - DS

IEC 61225:2019 specifies the performance and the functional characteristics of the low voltage static uninterruptible power supply (SUPS) systems in a nuclear power plant and, for applicable parts, in general for nuclear facilities. An uninterruptible power supply is an electrical equipment which...

ASTM D3338/D3338M-20 - Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
May 15, 2020 - ASTM International

1.1 This test method covers the estimation of the net heat of combustion (megajoules per kilogram or [Btu per pound]) of aviation gasolines and aircraft turbine and jet engine fuels in the range from 40.19 MJ/kg to 44.73 MJ/kg or [17 280 Btu/lb to 19 230 Btu/lb]. The precision for estimation of the...

ASTM A917-08(2020) - Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
January 1, 2020 - ASTM International

1.1 This specification covers hot-rolled and cold-rolled steel sheet coated by the electrolytic process. Coatings can be comprised of pure metals or metal alloys. For specific coatings, refer to Specifications A879/A879M and A918. 1.2 The product shall be coated on one or both surfaces with equal...

Advertisement