loading
DIN 1706 - Zinc
March 1, 1974 - DIN

This Standard applies to high purity zinc obtained by a single or repeated process of distillation or bye electrolysis and t gob zinc manufactured by reduction and distillation, possibly followed by refining, or produced by the electrolytic method.

ASTM D1691-12 - Standard Test Methods for Zinc in Water
September 1, 2012 - ASTM International

4.1 Zinc is an essential and beneficial element in body growth. Concentrations above 5 mg/L can cause a bitter astringent taste and opalescence in alkaline waters. The zinc concentration of U.S. drinking waters varies between 0.06 and 7.0 mg/L with a mean of 1.33 mg/L....

ASTM D1691-02(2007)e1 - Standard Test Methods for Zinc in Water
August 1, 2007 - ASTM International

Zinc is an essential and beneficial element in body growth. Concentrations above 5 mg/L can cause a bitter astringent taste and opalescence in alkaline waters. The zinc concentration of U.S. drinking waters varies between 0.06 and 7.0 mg/L with a mean of 1.33 mg/L. Zinc...

ASTM D1691-17(2025) - Standard Test Methods for Zinc in Water
July 1, 2025 - ASTM International

4.1 Zinc is an essential and beneficial element in body growth. Concentrations above 5 mg/L can cause a bitter astringent taste and opalescence in alkaline waters. The zinc concentration of U.S. drinking waters varies between 0.06?mg/L and 7.0?mg/L with a mean of 1.33 mg/L....

ASTM D1691-17 - Standard Test Methods for Zinc in Water
June 1, 2017 - ASTM International

4.1 Zinc is an essential and beneficial element in body growth. Concentrations above 5 mg/L can cause a bitter astringent taste and opalescence in alkaline waters. The zinc concentration of U.S. drinking waters varies between 0.06 and 7.0 mg/L with a mean of 1.33 mg/L....

JIS K 8012 - Zinc
March 25, 2006 - JSA
A description is not available for this item.
ISO DIS 6509 - Corrosion of metals and alloys - etermination of dezincification resistance of copper alloys with zinc
October 18, 2012 - ISO

This International Standard specifies a method for the determination of the dezincification resistance of copper alloys with zinc exposed to fresh, saline waters or drinking water, and calculation of dezincification depth after the test . The method is intended for copper...

PREN ISO 6509 - Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc
October 1, 2012 - BSI

This International Standard specifies a method for the determination of the dezincification resistance of copper alloys with zinc exposed to fresh, saline waters or drinking water, and calculation of dezincification depth after the test . The method is intended for copper...

JIS H 2107 - Zinc Ingots
March 20, 2015 - JSA

This Standard specifies the solid primary zinc (hereafter referred to as "ingot"), among zinc ingots, which is obtained from the ore or other zinc-bearing materials by a process of distillation or by electro-chemical reduction, excluding zinc material in liquid form and...

AMS2402L - Plating, Zinc
January 4, 2019 - SAE International

This specification covers the requirements for electrodeposited zinc plating.

DS/EN ISO 6509-1 - Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method
July 23, 2014 - DS

This International Standard specifies a method for the determination of the dezincification resistance of copper alloys with zinc exposed to fresh, saline waters or drinking water, and calculation of dezincification depth after the test . The method is intended for copper...

AMS2402K - Plating, Zinc
February 20, 2013 - SAE International

This specification covers the requirements for electrodeposited zinc plating.

GME L 000 0356 - Zinc anode
December 3, 2012 - GME

Application: Anode material in galvanic zinc baths

DEF STAN 68-43 - Zinc Oxide
January 11, 2013 - MODUK

This Standard specifies requirements for zinc oxide for use as an ingredient of pyrotechnic smoke compositions.

AMS2402H - Plating, Zinc
April 1, 2001 - SAE International

This specification covers the engineering requirements for electrodeposition of zinc and the properties of the deposit.

AMS2402G - PLATING, ZINC
February 1, 1995 - SAE International

This specification covers the engineering requirements for electrodeposition of zinc and the properties of the deposit.

AMS2402F - ZINC PLATING
October 1, 1991 - SAE International

This specification covers the engineering requirements for electrodepositton of zinc and the properties of the deposit.

BS 3436 - Ingot Zinc
February 28, 1986 - BSI

Requirements for four grades of primary zinc - 99.99%, 99.95%, 99.5% and 98.5%.

DEF STAN 68-67 - Zinc Stearate
January 1, 1990 - MODUK

This Standard specifies requirements for a zinc stearate for use as a pressing aid in the pelleting of certain HE and pyrotechnic materials.

GMW3044 - Zinc Plating
October 1, 2017 - GMW

Material Description. This coating system must be free of hexavalent chromium, per GMW3059 requirements. The plating shall be shown on the part drawing. Table 1 lists the common plating thickness codes covered by this specification. It is recommended to use these common codes to avoid product...

Advertisement