ASTM D8297/D8297M-23
Title: Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8298/D8298M-23
Title: Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Continuous Rainfall-Induced Erosion Using a Tilted Bed Slope
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8300-25
Title: Standard Test Method for Silica, Precipitated, Hydrated—Electrical Conductivity
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8302-25
Title: Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8304-24
Title: Standard Test Method for Determination of Compounded Forms of Iron in In-service Fluids
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8314-20(2025)
Title: Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8315-26
Title: Standard Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8316-20a(2025)
Title: Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8317-23
Title: Standard Test Method for Measuring Friction and Wear Properties of Greases Under Rolling Motion Using SRV Test Machine
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8321-25
Title: Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8322-25
Title: Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8323-24
Title: Standard Guide for Management of In-Service Phosphate Ester-based Fluids for Steam Turbine Electro-Hydraulic Control (EHC) Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8326-25
Title: Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8327-24
Title: Standard Test Method for Measuring the Permeability of Powders as a Function of Consolidation Using the Freeman Technology FT4 Powder Rheometer
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8329-21(2026)e1
Title: Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious M...
Organization: ASTM International
Year: 2021
Status: Active
ASTM D8330-20(2025)
Title: Standard Specification for Artists' Pastels
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8331/D8331M-25
Title: Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8336-24
Title: Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8342/D8342M-21(2026)
Title: Standard Test Method for Measuring the Probability of a Full Length Burn on a Cannabis/Hemp Pre-roll
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8344-24
Title: Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8350-23
Title: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8350-24
Title: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8350-24a
Title: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8350-25
Title: Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8352-25
Title: Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8353-26
Title: Standard Guide for Determination of Individual Particle Strength of Low Surface Area Catalysts and Catalyst Carriers by Drop Test onto a Steel Plate
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8354-25
Title: Standard Test Method for Flammability of Electrical Insulating Materials Intended for Wires or Cables When Burning in a Vertical Configuration
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8355-25
Title: Standard Test Methods for Flammability of Electrical Insulating Materials Used for Sleeving or Tubing
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8358-25
Title: Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8362-21(2026)
Title: Standard Test Method for Rubber—Determination of the Degree of Silanization by Dynamic Strain Softening
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8363-20(2026)
Title: Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8364/D8364M-21(2026)
Title: Standard Specification for Geosynthetic Cementitious Composite Mat (GCCM) Materials
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8366-21a(2026)
Title: Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8368-25
Title: Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption S...
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8369-25
Title: Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8371-24
Title: Standard Test Method for Trace Metal Content Analysis in Carbon Black
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8380-21(2026)
Title: Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8384-25
Title: Standard Practice for Extraction of Water-Soluble Amines from Crude Oils
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8387/D8387M-23
Title: Standard Test Method for High Bypass - Low Bearing Interaction Response of Polymer Matrix Composite Laminates
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8392-25
Title: Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8394-21(2026)
Title: Standard Test Method for Automated Measurement of Maturity, Fineness, Ribbon Width, and Micronaire of Cotton Fibers
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8401-24
Title: Standard Test Method for Identification of Polymer Type and Quantity of Microplastic Particles and Fibers in Waters with High to Low Suspended Solids Using Pyrolysis-Gas Chromatography/Mass Spect...
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8404-26
Title: Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
Organization: ASTM International
Year: 2026
Status: Inactive
ASTM D8404-26a
Title: Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8411-21(2026)
Title: Standard Test Method for Rubber Compounding Materials—Determination of 2-Mercaptobenzothiazole (MBT) in Rubber
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8421-24
Title: Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8421-25
Title: Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8427-25
Title: Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8430-26
Title: Standard Test Method for Determination of Ammonia Nitrogen by Semi-Automated Gas Diffusion Colorimetry
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8444/D8444M-24
Title: Standard Specification for Fiber Reinforced Polymer Dowel Bars for Load Transfer Between Concrete Slabs
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8451-22(2026)
Title: Standard Test Method for Calculation of Unfixed Chrome Concentration in Wet Blue
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8452-24
Title: Standard Guide for Medical-related Professionals within the Cannabis and Hemp Industries
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8456-26
Title: Standard Test Method for Determination of Nitrosamines in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8457-24
Title: Standard Practice for Cleaning Glass and Plastic Labware Used in Metal and Metalloid Analyses
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8457-26
Title: Standard Practice for Cleaning Glass and Plastic Labware Used in Metal and Metalloid Analyses
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8463/D8463M-23
Title: Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric, Silyl-Terminated Polymer Based Waterproofing Membrane for Use with Separate Wearing Course
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8463/D8463M-25
Title: Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric, Silyl-Terminated Polymer Based Waterproofing Membrane for Use with Separate Wearing Course
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8463/D8463M-26
Title: Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric, Silyl-Terminated Polymer Based Waterproofing Membrane for Use with Separate Wearing Course
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8466-26
Title: Standard Guide for Recovered Carbon Black—Carbon Black Test Methods for Testing rCB
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8471-22a(2026)
Title: Standard Practice for Silica—Reference Compound
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8475-25
Title: Standard Guide for Mixing Layer Height Determination by Laser-Based Ceilometer
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8479-24
Title: Standard Test Method for Determining the Peel Strength of GCCM Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8480-23
Title: Standard Test Method for Determining the Tensile Strength of GCCM Materials
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8484-25
Title: Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8487-24
Title: Standard Specification for Natural Gas, Hydrogen Blends for Use as a Motor Vehicle Fuel
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8491-25
Title: Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8501-23a
Title: Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding, Extrusion, Composites, Powder Coating and Additive Manufacturing
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8502-25
Title: Standard Guide for Field Collection of Airborne Particulate Samples for Subsequent Determination of Lead Content
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8505/D8505M-25
Title: Standard Specification for Basalt and Glass Fiber Reinforced Polymer (FRP) Bars for Concrete Reinforcement
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8508/D8508M-25
Title: Standard Guide for Evaluating the Surface of Structural Concrete Roof Decks to Receive Adhered Roofing Systems
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8512-23
Title: Standard Practice for Preliminary Karst Terrain Assessment for Site Development
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8513-24
Title: Standard Guide for Hemp Straw Intended for Decortication
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8518-25
Title: Standard Guide for Application of Hot-Applied Rubberized Asphalt Roofing and Waterproofing
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8520/D8520M-23
Title: Standard Specification for Iodotrifluoromethane (CF<inf>3</inf>I)
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8520/D8520M-23(2026)
Title: Standard Specification for Iodotrifluoromethane (CF<inf>3</inf>I)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8527-25
Title: Standard Test Method for Assessment of Fungal Biomass on Surfaces or Coatings by Measuring Fungal ß-N-acetylhexosaminidase (NAHA) Activity
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8528-24
Title: Standard Test Method for Determination of Fluoride and Glycol Degradation Products in Engine Coolants by Ion Chromatography
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8528-25
Title: Standard Test Method for Determination of Fluoride and Glycol Degradation Products in Engine Coolants by Ion Chromatography
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8529-25
Title: Standard Guide for Implementing High THC Cannabis Transportation Program in a Cannabis Operation
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8530/D8530M-24
Title: Standard Guide for the Selection and Use of Waterstops
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8530/D8530M-24a
Title: Standard Guide for the Selection and Use of Waterstops
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8531-23
Title: Standard Specification for Latex-Based Pavement Sealers Containing Mineral Aggregates
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8534-23
Title: Standard Test Method for Determination of Trace Peroxides in Liquid, Liquefied, and Reagents Soluble Hydrocarbon Streams using Flow Injection System with Ultraviolet/Visible Detector
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8534-24
Title: Standard Test Method for Determination of Trace Peroxides in Liquid, Liquefied, and Reagents Soluble Hydrocarbon Streams using Flow Injection System with Ultraviolet/Visible Detector
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8535-23
Title: Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Soil/Biosolid Matrices by Solvent Extraction, Filtering, and Followed by Liquid Chromatography Tandem Mass ...
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8536-25
Title: Standard Test Method for Available Sulfide in Water by Gas Extraction
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8537-23
Title: Standard Guide for Analysis of Calibration Data for Nuclear Instruments
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8538/D8538M-25
Title: Standard Specification for Aramid Composite Mesh Reinforcement for Concrete Spalling Prevention
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8539-23
Title: Standard Guide for Measurement of Polyolefin Properties Using TD-NMR Relaxometry
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8540-23
Title: Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position Using a Dry Bath
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8541-23
Title: Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8541-24
Title: Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8543-23
Title: Standard Test Method for Determination of Pesticides and Polychlorinated Biphenyls (PCBs) in Aqueous Solution by a Tandem Gas Chromatography/Mass Spectrometry/Mass Spectrometry (GC/MS/MS)
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8543-24
Title: Standard Test Method for Determination of Pesticides and Polychlorinated Biphenyls (PCBs) in Aqueous Solution by a Tandem Gas Chromatography/Mass Spectrometry/Mass Spectrometry (GC/MS/MS)
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8544-24
Title: Standard Test Method for Determination of Conductive Deposits of Electrical and Mechanical Components from Fluids in Liquid and Vapor States within an Electrically Charged System
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8545-23
Title: Standard Test Method for Determination of the Metal Deactivator Additive (MDA) (N,N'-disalicylidene-1,2-propanediamine) Content in Aviation Turbine Fuel by High Performance Liquid Chromatography ...
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8545-23e1
Title: Standard Test Method for Determination of the Metal Deactivator Additive (MDA) (N,N'-disalicylidene-1,2-propanediamine) Content in Aviation Turbine Fuel by High Performance Liquid Chromatography ...
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8545-25
Title: Standard Test Method for Determination of the Metal Deactivator Additive (MDA) (N,N'-disalicylidene-1,2-propanediamine) Content in Aviation Turbine Fuel by High Performance Liquid Chromatography ...
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8545-25a
Title: Standard Test Method for Determination of the Metal Deactivator Additive (MDA) (N,N'-disalicylidene-1,2-propanediamine) Content in Aviation Turbine Fuel by High Performance Liquid Chromatography ...
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8548-25
Title: Standard Test Method for Measuring the Erosion Function of a Soil in an Erosion Function Apparatus
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8549-24
Title: Standard Guide for Testing Cleaning Performance of Hand Dishwashing Detergents
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8549-25
Title: Standard Guide for Testing Cleaning Performance of Hand Dishwashing Detergents
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8550-25
Title: Standard Test Method for Determination of Infiltration Rate and Calculating Field Hydraulic Conductivity of Field Soils by Sealed Single-Ring Infiltrometer and Multiple Pressure Head Procedure
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8551-24
Title: Standard Practices for Permanent Monitoring Systems for Electrical Leak Detection and Location
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8551-24a
Title: Standard Practices for Permanent Monitoring Systems for Electrical Leak Detection and Location
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8552-25
Title: Standard Guide for Payment Processing Compliance in US Regulated Cannabis Industry
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8554-24
Title: Standard Test Method for Determination of the Degree of Unsaturation of Butyl Rubber by FTIR and Multivariate Analysis
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8554-24a
Title: Standard Test Method for Determination of the Degree of Unsaturation of Butyl Rubber by FTIR and Multivariate Analysis
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8555-24
Title: Standard Practice for Conducting a Coating/Lining Detachment Acoustical Sounding (Tapping) Inspection
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8556-24
Title: Standard Practice for Requirements of a Quality Management System for Cannabis and Hemp Operations
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8556-25
Title: Standard Practice for Requirements of a Quality Management System for Cannabis and Hemp Operations
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8557-24
Title: Standard Guide for Good Manufacturing Practices (GMPs) for Cannabis/Hemp-Containing Edibles, Dietary Supplements, Topicals, and Inhaled Products
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8558-24
Title: Standard Guide for Verification of a Certificate of Authentication Used to Track Products through Their Supply Chain by Utilizing Blockchain Technology
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8558-25
Title: Standard Guide for Supply Chain Traceability, Authentication, Verification, Validation, and Oversight Using Emerging Technologies Including Blockchain
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8559-24
Title: Standard Specification for Ambient Outdoor Air Quality Sensors and Sensor-Based Instruments for Portable and Fixed-Point Measurement
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8560-24
Title: Standard Guide for Determination of Airborne PFAS in the Indoor Air Environment
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8561-24
Title: Standard Test Method for Gel Time of Solventless Varnishes by Plunger Method
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8562-24
Title: Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Steel Alloys Using a Silver Probe
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8563-24
Title: Standard Guide for Measurement of Gas Permeability and Gas Diffusivity of Carbon and Graphite
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8565-24
Title: Standard Specification for Glycol-Based Coolants for Fuel Cell Electric Vehicles
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8566-24
Title: Standard Specification for Glycol-Based Electric Vehicle Coolant with Low Electrical Conductivity
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8567-24
Title: Standard Test Method for Analysis of Engine Coolant for Organic Additives by High Performance Liquid Chromatograph
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8568-24
Title: Standard Test Method for Determination of Lead by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8569-26
Title: Standard Practice for Surface Sampling of Non-Volatile and Semi-Volatile Organic Chemicals for Worker Protection
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8570-24
Title: Standard Practice for Vented and Fugitive Gaseous Emissions Destruction by Thermal Oxidizer
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8571-24
Title: Standard Practice for Detection of Hydrocarbon Liquids in Soils by Fluorescence with an Optical Imaging Profiler Using Direct Push Methods
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8572-25
Title: Standard Practice for Determining the Impact of an Asphalt Additive on Unaged Asphalt Binder Rheology Using Dynamic Shear Rheometer
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8574-25
Title: Standard Test Method for Determination of Select Pesticides and Herbicides in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8575-25
Title: Standard Guide for Techniques to Lower Microbial Load of Post-Harvest Inflorescence of Cannabis and Hemp
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8576-24
Title: Standard Test Method for Measuring the Thread Length and Pull-off Force of a Lubricating Grease by using the Falex TAA Instrument
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8577-25
Title: Standard Guide for Waste Plastic Process Oil Analyses
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8578-24
Title: Standard Test Method for Determination of Biodiesel and Hydrocarbon Types in Middle Distillate and Renewable Diesel Fuels by Supercritical Fluid Chromatography
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8579-24
Title: Standard Specification for Polyalkylene Glycol Lubricants Used in Gas Turbines
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8580-24
Title: Standard Practice for Wedge Welding of Polymeric Geomembranes
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8582-24
Title: Standard Practice for Recovered Carbon Black—Reference Compound
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8584-24
Title: Standard Guide for Testing of Preformed Thermoplastic Pavement Marking Material in the Laboratory and Installed Preformed Thermoplastic Pavement Markings in the Field
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8585-24
Title: Standard Guide for Recovered Carbon Black - Shelf Life
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8587-24
Title: Standard Guide for Determining a Point of Departure (POD) or Assigning a Threshold of Toxicological Concern (TTC), if needed, for Use in a Toxicological Risk Assessment of a Non-Cannabinoid Ingre...
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8587-25
Title: Standard Guide for Determining a Point of Departure (POD) or Assigning a Threshold of Toxicological Concern (TTC), if needed, for Use in a Toxicological Risk Assessment of a Non-Cannabinoid Ingre...
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8588-24
Title: Standard Practice for Approach to Calculating the Daily Inhalation Exposure Limit for a Non-cannabinoid Ingredient Intended for use in Cannabinoid Products for Vaporization
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8588-25
Title: Standard Practice for Approach to Calculating the Daily Inhalation Exposure Limit for a Non-cannabinoid Ingredient Intended for use in Cannabinoid Products for Vaporization
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8589-25
Title: Standard Practice for Cleaning Labware Used in Organic Analyses
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8591-24
Title: Standard Test Method for Determination of Fluorotelomer Alcohols in Test Chamber Air by Thermal Desorption-Gas Chromatography-Triple Quadrupole Tandem Mass Spectrometry (TD-GC-MS/MS)
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8591-25
Title: Standard Test Method for Determination of Fluorotelomer Alcohols in Test Chamber Air by Thermal Desorption-Gas Chromatography-Triple Quadrupole Tandem Mass Spectrometry (TD-GC-MS/MS)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8593-24
Title: Standard Test Method for Determining the Physical Properties of Horticultural Growing Media Utilizing a Porometer
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8595-25
Title: Standard Guide for Allergen Control in the Manufacturing of Orally Consumed Products Derived from <emph type="ital">Cannabis Sativa</emph> L Plants
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8596-24
Title: Standard Test Method for Bioavailable Aluminum in Water with Suspended Solids
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8597-24
Title: Standard Test Method for Surface Wettability of Coatings, Substrates, and Pigments by Contact Angle Measurement Using Portable Goniometers
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8598-25
Title: Standard Practice for Rolling Wheel Load Tests to Evaluate the Structural Performance of Roadway Test Sections with Geosynthetics
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8599-25
Title: Standard Practice for Reporting Results of Exposure Tests of Paints
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8600-25
Title: Standard Test Method for Quantitative Exudation Measurement of Flexible Poly(Vinyl Chloride) Plastics
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8603-25
Title: Standard Specification for High-Octane Unleaded Aviation Gasoline Containing ETBE
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8605/D8605M-26
Title: Standard Test Method for Use of the Pocket Penetrometer on Cohesive Soils
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8606-26
Title: Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Modified Continuously Closed Cup (MCCCFP) Tester
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8607-26
Title: Standard Test Method for Determination of Selected Elements in Aqueous Solutions by Single Quadrupole Inductively Coupled Plasma-Mass Spectrometry (ICP-MS)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8608-25
Title: Standard Test Method for Flame Resistance of Leather (12/60 Second Vertical Burn Test)
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8608/D8608M-25e1
Title: Standard Test Method for Flame Resistance of Leather (12/60 Second Vertical Burn Test)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8609-25
Title: Standard Test Method for Determination of Particle Size and Shape Analysis of Catalyst and Catalyst Carriers by Dynamic Imaging Analyzers
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8611-25
Title: Standard Guide for Accounts Receivable (AR) and Collections
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8613-25
Title: Standard Specification for Liquefied Petroleum Gases and Gas Mixtures Intended for Use in Herbal Extraction and Refinement Applications
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8614-25
Title: Standard Guide for Tire Pyrolysis Oil - Testing Methods
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8615-25
Title: Standard Test Method for Freezing Point of Aviation Fuels (Automatic Coaxial Optical Fibers Method)
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8615-26
Title: Standard Test Method for Freezing Point of Aviation Fuels (Automatic Coaxial Optical Fibers Method)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8617-25
Title: Standard Test Method for Evaluation of Automotive Engine Oils for Soot-Viscosity Performance in a Cummins ISB Medium-Duty Diesel Engine
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8617-26
Title: Standard Test Method for Evaluation of Automotive Engine Oils for Soot-Viscosity Performance in a Cummins ISB Medium-Duty Diesel Engine
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8618-25
Title: Standard Test Method for Determination of the Degree of Disintegration of Items Under Defined In-Field Composting Conditions Using Article Dosing
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8619-25
Title: Standard Test Method for Determination of the Degree of Disintegration of Items Under Defined In-Field Composting Conditions Using Containers
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8621-25
Title: Standard Test Methods for Recovered Carbon Black—Ash Content
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8621-25e1
Title: Standard Test Methods for Recovered Carbon Black—Ash Content
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8623-25
Title: Standard Practice for Environmental Odor Screening for Single, Character-Defining Odorants; Using Gas Chromatography-Mass Spectrometry Olfactometry (GC-MS-O) Analysis and On-Instrument Odor-Match...
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8624-25
Title: Standard Test Method for Evaluating CO<inf>2</inf> Sensors or Sensor Systems Used in Indoor Applications
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8625-25
Title: Standard Test Method for Chemical Assessment of Air Cleaning Technologies
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8625-25e1
Title: Standard Test Method for Chemical Assessment of Air Cleaning Technologies
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8626/D8626M-25
Title: Standard Test Method for Compression Properties of Flexible Cellular Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8628-25
Title: Standard Test Method for Analytical Procedure for the Analysis of Ultrashort Chain Perfluoroalkyl Substances (PFAS) in Aqueous Samples by Liquid Chromatography/Mass Spectrometry (LC-MS/MS)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8630-26
Title: Standard Test Method for Freezing Point of Aviation Fuels (Micro CFP Method)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8631-25
Title: Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Ethers
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8632-25
Title: Standard Classification for Recovered Carbon Black—rCB Used in Rubber Products
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8632-26
Title: Standard Classification for Recovered Carbon Black—rCB Used in Rubber Products
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8633-26
Title: Standard Test Methods for Evaluating the Cross-Grain Compression Strength and Stiffness of Wood and Wood-Based Products
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8634-25
Title: Standard Test Method for Measurement of Conductivity in Electric Vehicle (EV) Coolants
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8637/D8637M-25
Title: Standard Test Method for Mode I Dominant Face Sheet-to-Core Fracture Toughness of Sandwich Constructions
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8637/D8637M-26
Title: Standard Test Method for Mode I Dominant Facesheet-to-Core Fracture Toughness of Sandwich Constructions
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8638-26
Title: Standard Test Method for Single-Stage Total Moisture in Coke
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8639/D8639M-26
Title: Standard Test Method for the Effect of Fuel on Asphalt Mixtures
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8641-25
Title: Standard Test Method for Silica, Pelleted, Granulated - Pour Density
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8642-25
Title: Standard Test Method for Silica, Pelleted, Granulated - Fines
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8643-25
Title: Standard Test Method for Silica, Pelleted, Granulated - Attrition
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8644-25
Title: Standard Practice for Recovered Carbon Black (rCB), Reduction, Blending, and Drying of Gross Samples for Testing
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8645-25
Title: Standard Guide for Measurement of Gas Permeability in Graphite under Steady Flow
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8646-26
Title: Standard Test Method for Calculating and Reporting the Estimated Biodegradation Time of Non-Persistent Plastics Designed for Use in Aquatic Environments
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8647-25
Title: Standard Test Methods for Flammability of Rigid Plastic Materials Used for Electrical Insulation
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8648-25
Title: Standard Test Method for Determining Flowability Using GranuDrum
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8649-26
Title: Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8650/D8650M-26
Title: Standard Test Method for Determining Low-Temperature Flexibility of Liquid-Applied Polymeric Membranes Used in Roofing and Waterproofing
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8651-25
Title: Standard Specification for Undenatured Fuel Ethanol
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8653-26
Title: Standard Test Method for Recovered Carbon Black—Transmittance of Toluene Extract
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8654-26
Title: Standard Practice for Preparing Life-Cycle Assessments for Recovered Carbon Black (rCB) Products (Interim Product Category Rules)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8655-26
Title: Standard Classification System for Cell Classification of Pre- and Post-Consumer Recycled Rigid Poly(Vinyl Chloride)(PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Materials
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8656-26
Title: Standard Test Method for Analysis of Chrome Content (as Cr<inf>2</inf>O<inf>3</inf>) in Crust using Atomic Absorption or ICP
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8659-26
Title: Standard Test Method for Determination of Count per Volume and Size Distribution of Solid Particles in Light and Middle Distillate Fuels by Direct Imaging Analysis
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8661-26
Title: Standard Test Method for Dermination of Lead in New Enamel Paint Samples through X-Ray Fluorescence (XRF) Analysis
Organization: ASTM International
Year: 2026
Status: Inactive
ASTM D8661-26e1
Title: Standard Test Method for Determination of Lead in New Enamel Paint Samples through X-Ray Fluorescence (XRF) Analysis
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8662/D8662M-26
Title: Standard Specification for Plastic Temporary Ceiling Construction Barriers for Installation Below Automatic Sprinklers
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8665-26
Title: Standard Test Method for Measuring the Gelation Propensity of Automotive Engine Oils After Treatment with Acidified Water
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8666-26
Title: Standard Test Method for Determination of Rutting Resistance Using High Temperature Indirect Tensile (HT-IDT) Strength of Asphalt Mixtures
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8667-26
Title: Standard Test Method for Determining Intermediate and Low-Temperature Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer (DSR)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8668-26
Title: Standard Test Method for Determining the Peak Stress Energy and Shear Fatigue Resistance of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Monotonic Shear Strength (MOSS) Test
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8671-26
Title: Standard Guide for Determination of Silica and Alumina Molar Ratio in Zeolites by Inductively Coupled Plasma Optical Emission Spectroscopy
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8673/D8673M-26
Title: Standard Test Method for Using Handheld Electronic or Bimetal Thermometers to Monitor Asphalt Mixture Temperatures in the Field
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8675-26
Title: Standard Guide for Continuous Improvement for Cannabis and Hemp Operations
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8681-26
Title: Standard Test Method for Analysis of Methanol by Gas Chromatography (External Standard)
Organization: ASTM International
Year: 2026
Status: Active
ASTM E1-14(2025)
Title: Standard Specification for ASTM Liquid-in-Glass Thermometers
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3-11(2025)
Title: Standard Guide for Preparation of Metallographic Specimens
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E3-26
Title: Standard Guide for Preparation of Metallographic Specimens
Organization: ASTM International
Year: 2026
Status: Active
ASTM E4-24
Title: Standard Practices for Force Calibration and Verification of Testing Machines
Organization: ASTM International
Year: 2024
Status: Active
ASTM E6-23ae1
Title: Standard Terminology Relating to Methods of Mechanical Testing
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E6-25
Title: Standard Terminology Relating to Methods of Mechanical Testing
Organization: ASTM International
Year: 2025
Status: Active
ASTM E7-25
Title: Standard Terminology Relating to Metallography
Organization: ASTM International
Year: 2025
Status: Active
ASTM E8/E8M-24
Title: Standard Test Methods for Tension Testing of Metallic Materials
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E8/E8M-25
Title: Standard Test Methods for Tension Testing of Metallic Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E9-19(2025)
Title: Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E9-19(2025)e1
Title: Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
Organization: ASTM International
Year: 2025
Status: Active
ASTM E11-24
Title: Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
Organization: ASTM International
Year: 2024
Status: Active
ASTM E18-24
Title: Standard Test Methods for Rockwell Hardness of Metallic Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E18-25
Title: Standard Test Methods for Rockwell Hardness of Metallic Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E23-24
Title: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E23-25
Title: Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E45-18a(2023)
Title: Standard Test Methods for Determining the Inclusion Content of Steel
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E45-25
Title: Standard Test Methods for Determining the Inclusion Content of Steel
Organization: ASTM International
Year: 2025
Status: Active
ASTM E50-24
Title: Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E50-25
Title: Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E70-24
Title: Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
Organization: ASTM International
Year: 2023
Status: Active
ASTM E72-25
Title: Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
Organization: ASTM International
Year: 2025
Status: Active
ASTM E74-18(2026)
Title: Standard Practices for Calibration and Verification for Force-Measuring Instruments
Organization: ASTM International
Year: 2026
Status: Active
ASTM E81-96(2024)
Title: Standard Test Method for Preparing Quantitative Pole Figures
Organization: ASTM International
Year: 2024
Status: Active
ASTM E83-25
Title: Standard Practice for Calibration, Verification, and Classification of Extensometer Systems
Organization: ASTM International
Year: 2025
Status: Active
ASTM E84-23d
Title: Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E84-24
Title: Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E84-25
Title: Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E84-26
Title: Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2026
Status: Inactive
ASTM E84-26a
Title: Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2026
Status: Active
ASTM E88-25
Title: Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
Organization: ASTM International
Year: 2025
Status: Active
ASTM E90-23
Title: Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
Organization: ASTM International
Year: 2023
Status: Active
ASTM E96/E96M-23
Title: Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E96/E96M-24
Title: Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E96/E96M-24a
Title: Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E100-19(2024)
Title: Standard Specification for ASTM Hydrometers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E103-24
Title: Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E108-24
Title: Standard Test Methods for Fire Tests of Roof Coverings
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E108-25
Title: Standard Test Methods for Fire Tests of Roof Coverings
Organization: ASTM International
Year: 2024
Status: Active
ASTM E111-17(2025)e1
Title: Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
Organization: ASTM International
Year: 2025
Status: Active
ASTM E112-24
Title: Standard Test Methods for Determining Average Grain Size
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E112-25
Title: Standard Test Methods for Determining Average Grain Size
Organization: ASTM International
Year: 2025
Status: Active
ASTM E119-23
Title: Standard Test Methods for Fire Tests of Building Construction and Materials
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E119-24
Title: Standard Test Methods for Fire Tests of Building Construction and Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E119-26
Title: Standard Test Methods for Fire Tests of Building Construction and Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E123-02(2024)
Title: Standard Specification for Apparatus for Determination of Water by Distillation
Organization: ASTM International
Year: 2024
Status: Active
ASTM E126-19(2024)
Title: Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E132-17(2025)e1
Title: Standard Test Method for Poisson's Ratio at Room Temperature
Organization: ASTM International
Year: 2025
Status: Active
ASTM E135-24
Title: Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E135-25
Title: Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E135-25a
Title: Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E135-26
Title: Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
Organization: ASTM International
Year: 2026
Status: Inactive
ASTM E135-26a
Title: Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
Organization: ASTM International
Year: 2026
Status: Active
ASTM E136-24
Title: Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?&deg;C
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E136-24a
Title: Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?&deg;C
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E136-24b
Title: Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?&deg;C
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E136-24c
Title: Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?&deg;C
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E136-26
Title: Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?&deg;C
Organization: ASTM International
Year: 2025
Status: Active
ASTM E139-24
Title: Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E141-10(2023)
Title: Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
Organization: ASTM International
Year: 2023
Status: Active
ASTM E144-14(2026)
Title: Standard Practice for Safe Use of Oxygen Combustion Vessels
Organization: ASTM International
Year: 2026
Status: Active
ASTM E145-19(2024)
Title: Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
Organization: ASTM International
Year: 2024
Status: Active
ASTM E154/E154M-08a(2025)
Title: Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
Organization: ASTM International
Year: 2025
Status: Active
ASTM E155-20(2026)
Title: Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
Organization: ASTM International
Year: 2026
Status: Active
ASTM E162-24
Title: Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E162-25
Title: Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E162-25a
Title: Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2025
Status: Active
ASTM E164-24
Title: Standard Practice for Contact Ultrasonic Testing of Weldments
Organization: ASTM International
Year: 2024
Status: Active
ASTM E170-24
Title: Standard Terminology Relating to Radiation Measurements and Dosimetry
Organization: ASTM International
Year: 2024
Status: Active
ASTM E176-24
Title: Standard Terminology of Fire Standards
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E176-24a
Title: Standard Terminology of Fire Standards
Organization: ASTM International
Year: 2024
Status: Active
ASTM E177-26
Title: Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
Organization: ASTM International
Year: 2026
Status: Inactive
ASTM E177-26a
Title: Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
Organization: ASTM International
Year: 2026
Status: Active
ASTM E185-25
Title: Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
Organization: ASTM International
Year: 2025
Status: Active
ASTM E186-20(2026)
Title: Standard Reference Radiographs for Heavy-Walled (2 to 4<fraction><num>1</num><den>2</den></fraction > in. (50.8 to 114 mm)) Steel Castings
Organization: ASTM International
Year: 2026
Status: Active
ASTM E192-20(2026)
Title: Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications
Organization: ASTM International
Year: 2026
Status: Active
ASTM E194-20(2024)
Title: Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
Organization: ASTM International
Year: 2024
Status: Active
ASTM E196-06(2026)
Title: Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
Organization: ASTM International
Year: 2026
Status: Active
ASTM E202-24
Title: Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
Organization: ASTM International
Year: 2024
Status: Active
ASTM E203-24
Title: Standard Test Method for Water Using Volumetric Karl Fischer Titration
Organization: ASTM International
Year: 2023
Status: Active
ASTM E220-25
Title: Standard Test Method for Calibration of Thermocouples by Comparison Techniques
Organization: ASTM International
Year: 2025
Status: Active
ASTM E223-25
Title: Standard Test Methods for Analysis of Sulfuric Acid
Organization: ASTM International
Year: 2025
Status: Active
ASTM E230/E230M-23
Title: Standard Specification for Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E230/E230M-23a
Title: Standard Specification for Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
Organization: ASTM International
Year: 2023
Status: Active
ASTM E237-02(2024)
Title: Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)
Organization: ASTM International
Year: 2024
Status: Active
ASTM E238-17a(2025)
Title: Standard Test Method for Pin-Type Bearing Test of Metallic Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E242-15(2026)
Title: Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed
Organization: ASTM International
Year: 2026
Status: Active
ASTM E243-24
Title: Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
Organization: ASTM International
Year: 2024
Status: Active
ASTM E246-25
Title: Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
Organization: ASTM International
Year: 2025
Status: Active
ASTM E247-25
Title: Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
Organization: ASTM International
Year: 2025
Status: Active
ASTM E252-24
Title: Standard Test Method for Thickness of Foil and Thin Sheet by Mass Measurement
Organization: ASTM International
Year: 2024
Status: Active
ASTM E253-24
Title: Standard Terminology Relating to Sensory Evaluation of Materials and Products
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E253-24a
Title: Standard Terminology Relating to Sensory Evaluation of Materials and Products
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E253-24b
Title: Standard Terminology Relating to Sensory Evaluation of Materials and Products
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E253-25
Title: Standard Terminology Relating to Sensory Evaluation of Materials and Products
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E253-25a
Title: Standard Terminology Relating to Sensory Evaluation of Materials and Products
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E253-26
Title: Standard Terminology Relating to Sensory Evaluation of Materials and Products
Organization: ASTM International
Year: 2026
Status: Active
ASTM E260-96(2026)
Title: Standard Practice for Packed Column Gas Chromatography
Organization: ASTM International
Year: 2025
Status: Active
ASTM E262-17(2024)e1
Title: Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
Organization: ASTM International
Year: 2024
Status: Active
ASTM E263-25
Title: Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
Organization: ASTM International
Year: 2025
Status: Active
ASTM E264-25
Title: Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
Organization: ASTM International
Year: 2025
Status: Active
ASTM E265-15(2020)
Title: Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
Organization: ASTM International
Year: 2020
Status: Active
ASTM E273-25
Title: Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
Organization: ASTM International
Year: 2025
Status: Active
ASTM E274/E274M-15(2020)
Title: Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
Organization: ASTM International
Year: 2020
Status: Inactive
ASTM E274/E274M-24
Title: Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
Organization: ASTM International
Year: 2024
Status: Active
ASTM E279-26
Title: Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets, Lump, and Sinter by the Tumbler Test
Organization: ASTM International
Year: 2026
Status: Active
ASTM E280-21(2026)
Title: Standard Reference Radiographs for Heavy-Walled (4<fraction><num>1</num><den>2</den></fraction > to 12 in. (114 to 305 mm)) Steel Castings
Organization: ASTM International
Year: 2026
Status: Active
ASTM E283/E283M-26
Title: Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
Organization: ASTM International
Year: 2026
Status: Active
ASTM E284-25
Title: Standard Terminology of Appearance
Organization: ASTM International
Year: 2025
Status: Active
ASTM E287-02(2024)
Title: Standard Specification for Laboratory Glass Graduated Burets
Organization: ASTM International
Year: 2024
Status: Active
ASTM E288-10(2025)
Title: Standard Specification for Laboratory Glass Volumetric Flasks
Organization: ASTM International
Year: 2025
Status: Active
ASTM E289-25
Title: Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
Organization: ASTM International
Year: 2025
Status: Active
ASTM E292-24
Title: Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E295-82(2025)
Title: Standard Test Method for Measured Speed of Oil Diffusion Pumps
Organization: ASTM International
Year: 2025
Status: Active
ASTM E296-70(2025)
Title: Standard Practice for Ionization Gage Application to Space Simulators
Organization: ASTM International
Year: 2025
Status: Active
ASTM E298-25
Title: Standard Test Methods for Assay of Organic Peroxides
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E298-25a
Title: Standard Test Methods for Assay of Organic Peroxides
Organization: ASTM International
Year: 2025
Status: Active
ASTM E299-25
Title: Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
Organization: ASTM International
Year: 2025
Status: Active
ASTM E307-72(2025)
Title: Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
Organization: ASTM International
Year: 2025
Status: Active
ASTM E309-24
Title: Standard Practice for Eddy Current Examination of Steel Tubular Products
Organization: ASTM International
Year: 2024
Status: Active
ASTM E310-21(2026)
Title: Standard Reference Radiographs for Tin Bronze Castings
Organization: ASTM International
Year: 2026
Status: Active
ASTM E313-20(2025)
Title: Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
Organization: ASTM International
Year: 2025
Status: Active
ASTM E314-24
Title: Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques
Organization: ASTM International
Year: 2024
Status: Active
ASTM E316-25
Title: Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
Organization: ASTM International
Year: 2025
Status: Active
ASTM E328-26
Title: Standard Test Methods for Stress Relaxation for Materials and Structures
Organization: ASTM International
Year: 2026
Status: Active
ASTM E329-23
Title: Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E329-25
Title: Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E329-25a
Title: Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E329-25b
Title: Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E329-26
Title: Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
Organization: ASTM International
Year: 2026
Status: Active
ASTM E336-24
Title: Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E336-25
Title: Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E336-25a
Title: Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
Organization: ASTM International
Year: 2025
Status: Active
ASTM E340-23
Title: Standard Practice for Macroetching Metals and Alloys
Organization: ASTM International
Year: 2023
Status: Active
ASTM E342-24
Title: Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry
Organization: ASTM International
Year: 2024
Status: Active
ASTM E344-23
Title: Terminology Relating to Thermometry and Hydrometry
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E344-26
Title: Terminology Relating to Thermometry and Hydrometry
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E344-26a
Title: Terminology Relating to Thermometry and Hydrometry
Organization: ASTM International
Year: 2026
Status: Active
ASTM E345-24
Title: Standard Test Methods of Tension Testing of Metallic Foil
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E345-24a
Title: Standard Test Methods of Tension Testing of Metallic Foil
Organization: ASTM International
Year: 2024
Status: Active
ASTM E346-24
Title: Standard Test Method for Analysis of Carbonizables in Methanol
Organization: ASTM International
Year: 2024
Status: Active
ASTM E350-23
Title: Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
Organization: ASTM International
Year: 2023
Status: Active
ASTM E351-25
Title: Standard Test Methods for Chemical Analysis of Cast Iron—All Types
Organization: ASTM International
Year: 2025
Status: Active
ASTM E352-23
Title: Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
Organization: ASTM International
Year: 2023
Status: Active
ASTM E353-25
Title: Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
Organization: ASTM International
Year: 2025
Status: Active
ASTM E354-25
Title: Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
Organization: ASTM International
Year: 2025
Status: Active
ASTM E359-26
Title: Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
Organization: ASTM International
Year: 2026
Status: Active
ASTM E376-26
Title: Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
Organization: ASTM International
Year: 2026
Status: Active
ASTM E390-20(2026)
Title: Standard Reference Radiographs for Steel Fusion Welds
Organization: ASTM International
Year: 2026
Status: Active
ASTM E396-24
Title: Standard Test Methods for Chemical Analysis of Cadmium
Organization: ASTM International
Year: 2024
Status: Active
ASTM E398-24
Title: Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
Organization: ASTM International
Year: 2024
Status: Active
ASTM E399-24
Title: Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E406-26
Title: Standard Practice for Using Controlled Atmospheres in Atomic Emission Spectrometry
Organization: ASTM International
Year: 2026
Status: Active
ASTM E407-23
Title: Standard Practice for Microetching Metals and Alloys
Organization: ASTM International
Year: 2023
Status: Active
ASTM E408-13(2025)
Title: Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
Organization: ASTM International
Year: 2025
Status: Active
ASTM E410-24
Title: Standard Test Method for Moisture and Residue in Liquid Chlorine
Organization: ASTM International
Year: 2024
Status: Active
ASTM E411-24
Title: Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E411-25
Title: Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
Organization: ASTM International
Year: 2025
Status: Active
ASTM E423-71(2025)
Title: Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
Organization: ASTM International
Year: 2025
Status: Active
ASTM E438-92(2024)
Title: Standard Specification for Glasses in Laboratory Apparatus
Organization: ASTM International
Year: 2024
Status: Active
ASTM E446-20(2026)
Title: Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
Organization: ASTM International
Year: 2026
Status: Active
ASTM E449-24
Title: Standard Test Methods for Analysis of Calcium Chloride
Organization: ASTM International
Year: 2024
Status: Active
ASTM E456-13a(2022)e1
Title: Standard Terminology Relating to Quality and Statistics
Organization: ASTM International
Year: 2022
Status: Active
ASTM E465-24
Title: Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry
Organization: ASTM International
Year: 2024
Status: Active
ASTM E468/E468M-23a
Title: Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
Organization: ASTM International
Year: 2023
Status: Active
ASTM E473-25
Title: Standard Terminology Relating to Thermal Analysis and Rheology
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E473-25a
Title: Standard Terminology Relating to Thermal Analysis and Rheology
Organization: ASTM International
Year: 2025
Status: Active
ASTM E475-25
Title: Standard Test Method for Assay of High Purity Di-<emph type="bdit">tert</emph>-Butyl Peroxide Using Gas Chromatography
Organization: ASTM International
Year: 2024
Status: Active
ASTM E477-26
Title: Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
Organization: ASTM International
Year: 2026
Status: Active
ASTM E478-24
Title: Standard Test Methods for Chemical Analysis of Copper Alloys
Organization: ASTM International
Year: 2024
Status: Active
ASTM E492-25
Title: Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
Organization: ASTM International
Year: 2025
Status: Active
ASTM E494-20(2025)
Title: Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method
Organization: ASTM International
Year: 2025
Status: Active
ASTM E499/E499M-11(2025)
Title: Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode<rangeref></rangeref >
Organization: ASTM International
Year: 2025
Status: Active
ASTM E506-24
Title: Standard Test Method for Mercury in Liquid Chlorine
Organization: ASTM International
Year: 2024
Status: Active
ASTM E517-24
Title: Standard Test Method for Plastic Strain Ratio <emph type="bdit">r</emph> for Sheet Metal
Organization: ASTM International
Year: 2024
Status: Active
ASTM E520-08(2023)e1
Title: Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry
Organization: ASTM International
Year: 2023
Status: Active
ASTM E521-25
Title: Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E521-25a
Title: Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
Organization: ASTM International
Year: 2025
Status: Active
ASTM E529-04(2026)
Title: Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
Organization: ASTM International
Year: 2026
Status: Active
ASTM E531-24
Title: Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E534-26
Title: Standard Test Methods for Chemical Analysis of Sodium Chloride
Organization: ASTM International
Year: 2026
Status: Active
ASTM E535-23
Title: Standard Practice for Preparation of Fire-Test-Response Standards
Organization: ASTM International
Year: 2023
Status: Active
ASTM E537-24
Title: Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
Organization: ASTM International
Year: 2024
Status: Active
ASTM E539-19(2025)
Title: Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
Organization: ASTM International
Year: 2025
Status: Active
ASTM E541-22(2026)e1
Title: Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
Organization: ASTM International
Year: 2026
Status: Active
ASTM E543-26
Title: Standard Specification for Agencies Performing Nondestructive Testing
Organization: ASTM International
Year: 2025
Status: Active
ASTM E544-24
Title: Standard Practice for Referencing Suprathreshold Odor Intensity
Organization: ASTM International
Year: 2024
Status: Active
ASTM E545/E545M-25
Title: Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
Organization: ASTM International
Year: 2025
Status: Active
ASTM E547-00(2024)
Title: Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
Organization: ASTM International
Year: 2024
Status: Active
ASTM E550-24
Title: Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
Organization: ASTM International
Year: 2024
Status: Active
ASTM E556/E556M-11(2024)
Title: Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
Organization: ASTM International
Year: 2024
Status: Active
ASTM E557-12(2026)
Title: Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
Organization: ASTM International
Year: 2026
Status: Active
ASTM E566-24
Title: Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals
Organization: ASTM International
Year: 2024
Status: Active
ASTM E569/E569M-26
Title: Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
Organization: ASTM International
Year: 2026
Status: Active
ASTM E570-25
Title: Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
Organization: ASTM International
Year: 2025
Status: Active
ASTM E571-24
Title: Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
Organization: ASTM International
Year: 2024
Status: Active
ASTM E575-05(2026)
Title: Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
Organization: ASTM International
Year: 2026
Status: Active
ASTM E580/E580M-24
Title: Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E580/E580M-24a
Title: Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
Organization: ASTM International
Year: 2024
Status: Active
ASTM E587-15(2025)
Title: Standard Practice for Ultrasonic Angle-Beam Contact Testing
Organization: ASTM International
Year: 2025
Status: Active
ASTM E592-20(2026)
Title: Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates <fraction><num>1</num><den>4 </den> </fraction> to 2 in. (6 to 51 mm) Thick with X-Rays...
Organization: ASTM International
Year: 2026
Status: Active
ASTM E594-96(2026)
Title: Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
Organization: ASTM International
Year: 2025
Status: Active
ASTM E603-25
Title: Standard Guide for Room Fire Experiments
Organization: ASTM International
Year: 2025
Status: Active
ASTM E608/E608M-24
Title: Standard Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
Organization: ASTM International
Year: 2024
Status: Active
ASTM E609-24
Title: Standard Terminology Relating to Pesticides
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E609-25
Title: Standard Terminology Relating to Pesticides
Organization: ASTM International
Year: 2025
Status: Active
ASTM E617-23
Title: Standard Specification for Laboratory Weights and Precision Mass Standards
Organization: ASTM International
Year: 2023
Status: Active
ASTM E631-15(2024)
Title: Standard Terminology of Building Constructions
Organization: ASTM International
Year: 2024
Status: Active
ASTM E636-20(2026)
Title: Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels
Organization: ASTM International
Year: 2026
Status: Active
ASTM E641-25
Title: Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
Organization: ASTM International
Year: 2025
Status: Active
ASTM E643-24
Title: Standard Test Method for Ball Punch Deformation of Metallic Sheet Material
Organization: ASTM International
Year: 2024
Status: Active
ASTM E644-11(2025)
Title: Standard Test Methods for Testing Industrial Resistance Thermometers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E645-25
Title: Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems
Organization: ASTM International
Year: 2025
Status: Active
ASTM E646-16(2024)
Title: Standard Test Method for Tensile Strain-Hardening Exponents (<emph type="bdit">n</emph > -Values) of Metallic Sheet Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E647-23b
Title: Standard Test Method for Measurement of Fatigue Crack Growth Rates
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E647-24
Title: Standard Test Method for Measurement of Fatigue Crack Growth Rates
Organization: ASTM International
Year: 2024
Status: Active
ASTM E648-23
Title: Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E648-25
Title: Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E648-25a
Title: Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2025
Status: Active
ASTM E649-24
Title: Standard Test Method for Bromine in Chlorine
Organization: ASTM International
Year: 2024
Status: Active
ASTM E650/E650M-24
Title: Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
Organization: ASTM International
Year: 2024
Status: Active
ASTM E651/E651M-22(2026)e1
Title: Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
Organization: ASTM International
Year: 2026
Status: Active
ASTM E659-24
Title: Standard Test Method for Autoignition Temperature of Chemicals
Organization: ASTM International
Year: 2024
Status: Active
ASTM E664/E664M-15(2020)e1
Title: Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
Organization: ASTM International
Year: 2020
Status: Inactive
ASTM E664/E664M-25
Title: Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
Organization: ASTM International
Year: 2025
Status: Active
ASTM E670-09(2024)
Title: Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
Organization: ASTM International
Year: 2024
Status: Active
ASTM E672-87(2024)
Title: Standard Specification for Disposable Glass Micropipets
Organization: ASTM International
Year: 2024
Status: Active
ASTM E675-02(2024)
Title: Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E677-24
Title: Standard Specification for Interchangeable Spherical Ground Joints
Organization: ASTM International
Year: 2024
Status: Active
ASTM E680-79(2024)
Title: Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E682-92(2026)
Title: Standard Practice for Liquid Chromatography Terms and Relationships
Organization: ASTM International
Year: 2025
Status: Active
ASTM E688-25
Title: Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing
Organization: ASTM International
Year: 2025
Status: Active
ASTM E689-20(2026)
Title: Standard Reference Radiographs for Ductile Iron Castings
Organization: ASTM International
Year: 2026
Status: Active
ASTM E690-25
Title: Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
Organization: ASTM International
Year: 2025
Status: Active
ASTM E694-18(2024)
Title: Standard Specification for Laboratory Glass Volumetric Apparatus
Organization: ASTM International
Year: 2024
Status: Active
ASTM E697-96(2026)
Title: Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography
Organization: ASTM International
Year: 2025
Status: Active
ASTM E703-26
Title: Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
Organization: ASTM International
Year: 2026
Status: Active
ASTM E704-26
Title: Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
Organization: ASTM International
Year: 2026
Status: Active
ASTM E705-25
Title: Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
Organization: ASTM International
Year: 2025
Status: Active
ASTM E708-25
Title: Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
Organization: ASTM International
Year: 2025
Status: Active
ASTM E714-94(2026)
Title: Standard Specification for Disposable Glass Serological Pipets
Organization: ASTM International
Year: 2026
Status: Active
ASTM E722-19(2026)
Title: Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation Hardness Testing of Electronics
Organization: ASTM International
Year: 2026
Status: Active
ASTM E723-24
Title: Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)
Organization: ASTM International
Year: 2024
Status: Active
ASTM E725-26
Title: Standard Test Method for Sampling Granular Carriers and Granular Pesticides
Organization: ASTM International
Year: 2026
Status: Active
ASTM E726-26
Title: Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
Organization: ASTM International
Year: 2026
Status: Active
ASTM E727/E727M-25
Title: Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
Organization: ASTM International
Year: 2025
Status: Active
ASTM E728-25
Title: Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
Organization: ASTM International
Year: 2025
Status: Active
ASTM E732-80(2024)
Title: Standard Specification for Disposable Pasteur-Type Pipet
Organization: ASTM International
Year: 2024
Status: Active
ASTM E734-80(2026)
Title: Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
Organization: ASTM International
Year: 2026
Status: Active
ASTM E740/E740M-23
Title: Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
Organization: ASTM International
Year: 2023
Status: Active
ASTM E741-24
Title: Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
Organization: ASTM International
Year: 2024
Status: Active
ASTM E746-23
Title: Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems below 4?MeV
Organization: ASTM International
Year: 2023
Status: Active
ASTM E747-24
Title: Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiography
Organization: ASTM International
Year: 2024
Status: Active
ASTM E748-26
Title: Standard Guide for Thermal Neutron Radiography of Materials
Organization: ASTM International
Year: 2026
Status: Active
ASTM E749/E749M-26
Title: Standard Practice for Acoustic Emission Monitoring During Continuous Welding
Organization: ASTM International
Year: 2026
Status: Active
ASTM E750-15(2025)
Title: Standard Practice for Characterizing Acoustic Emission Instrumentation
Organization: ASTM International
Year: 2025
Status: Active
ASTM E756-05(2023)
Title: Standard Test Method for Measuring Vibration-Damping Properties of Materials
Organization: ASTM International
Year: 2023
Status: Active
ASTM E772-15(2026)
Title: Standard Terminology of Solar Energy Conversion
Organization: ASTM International
Year: 2026
Status: Active
ASTM E785-81(2024)
Title: Standard Specification for Crucibles, Ignition, Laboratory, Metal
Organization: ASTM International
Year: 2024
Status: Active
ASTM E786-81(2024)
Title: Standard Specification for Dishes, Evaporating, Platinum
Organization: ASTM International
Year: 2024
Status: Active
ASTM E787-81(2024)
Title: Standard Specification for Disposable Glass Micro Blood Collection Pipets
Organization: ASTM International
Year: 2024
Status: Active
ASTM E788-97(2024)
Title: Standard Specification for Pipet, Blood Diluting
Organization: ASTM International
Year: 2024
Status: Active
ASTM E793-24
Title: Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
Organization: ASTM International
Year: 2024
Status: Active
ASTM E794-24
Title: Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis
Organization: ASTM International
Year: 2024
Status: Active
ASTM E798-24
Title: Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
Organization: ASTM International
Year: 2024
Status: Active
ASTM E800-26
Title: Standard Guide for Measurement of Gases Present or Generated During Fires
Organization: ASTM International
Year: 2026
Status: Active
ASTM E802-21(2026)
Title: Standard Reference Radiographs for Gray Iron Castings Up to 4<fraction><num>1</num><den>2</den> </fraction> in. (114 mm) in Thickness
Organization: ASTM International
Year: 2026
Status: Active
ASTM E803-20
Title: Standard Test Method for Determining the <emph type="ital">L/D&#x2009;</emph>Ratio of Neutron Radiography Beams
Organization: ASTM International
Year: 2020
Status: Inactive
ASTM E803-20(2026)
Title: Standard Test Method for Determining the <emph type="ital">L/D?</emph>Ratio of Neutron Radiography Beams
Organization: ASTM International
Year: 2026
Status: Active
ASTM E806-24
Title: Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
Organization: ASTM International
Year: 2024
Status: Active
ASTM E808-23
Title: Standard Practice for Describing Retroreflection
Organization: ASTM International
Year: 2023
Status: Active
ASTM E810-20(2025)
Title: Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
Organization: ASTM International
Year: 2025
Status: Active
ASTM E811-09(2025)
Title: Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
Organization: ASTM International
Year: 2025
Status: Active
ASTM E814-24
Title: Standard Test Method for Fire Tests of Penetration Firestop Systems
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E814-26
Title: Standard Test Method for Fire Tests of Penetration Firestop Systems
Organization: ASTM International
Year: 2026
Status: Active
ASTM E815-17b(2023)
Title: Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E815-24
Title: Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry
Organization: ASTM International
Year: 2024
Status: Active
ASTM E824-26
Title: Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
Organization: ASTM International
Year: 2026
Status: Active
ASTM E831-24
Title: Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E831-25
Title: Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
Organization: ASTM International
Year: 2025
Status: Active
ASTM E832-81(2024)
Title: Standard Specification for Laboratory Filter Papers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E834-21(2026)
Title: Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
Organization: ASTM International
Year: 2026
Status: Active
ASTM E837-25
Title: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E837-25e1
Title: Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
Organization: ASTM International
Year: 2025
Status: Active
ASTM E839-23
Title: Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
Organization: ASTM International
Year: 2023
Status: Active
ASTM E844-25
Title: Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance
Organization: ASTM International
Year: 2025
Status: Active
ASTM E853-25
Title: Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
Organization: ASTM International
Year: 2025
Status: Active
ASTM E854-19(2025)
Title: Standard Test Method for Application and Analysis of Solid-State Track Recorder (SSTR) Monitors for Reactor Surveillance (Withdrawn 2025)
Organization: ASTM International
Year: 2025
Status: Inactive


Advertisement