ASTM D6689-01(2011)
Title:
Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E979-91(1998)
Title:
Standard Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM D6889-03(2011)
Title:
Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7066-04(2011)
Title:
Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7125-11
Title:
Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7726-11
Title:
Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2473-05(2011)
Title:
Standard Practice for the Occupational/Environmental Health View of the Electronic Health Record (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2538-06(2011)
Title:
Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F316-03(2011)
Title:
Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2766-11
Title:
Standard Test Method for Boat Barriers
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM UOP991-11
Title:
Chloride, Fluoride, and Bromide in Liquid Organics by Combustion Ion Chromatography (CIC)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B1-01
Title:
Standard Specification for Hard-Drawn Copper Wire
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM E981-84(2000)
Title:
Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM C553-11
Title:
Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1393-11
Title:
Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D50-90(2011)
Title:
Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D85-05(2011)
Title:
Standard Specification for Ochre Pigment
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D210-05(2011)
Title:
Standard Specification for Bone Black Pigment
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D263-05(2011)
Title:
Standard Specification for Chrome Oxide Green Pigment
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D476-00(2011)
Title:
Standard Classification for Dry Pigmentary Titanium Dioxide Products
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D520-00(2011)
Title:
Standard Specification for Zinc Dust Pigment
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1336-07(2011)
Title:
Standard Test Method for Distortion of Yarn in Woven Fabrics
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1343-95(2011)
Title:
Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E982-94(1998)
Title:
Standard Specification for Laboratory Glass Test Tubes
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM D1578-93(2011)
Title:
Standard Test Method for Breaking Strength of Yarn in Skein Form
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1696-95(2011)
Title:
Standard Test Method for Solubility of Cellulose in Sodium Hydroxide
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1777-96(2011)e1
Title:
Standard Test Method for Thickness of Textile Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1926-00(2011)
Title:
Standard Test Methods for Carboxyl Content of Cellulose
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2929-89(2011)
Title:
Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3512/D3512M-10e2
Title:
Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
Organization: ASTM International
Year: 2010
Status: Inactive
ASTM D3516-89(2011)
Title:
Standard Test Methods for Ashing Cellulose
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3720-90(2011)
Title:
Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3721-05(2011)
Title:
Standard Specification for Synthetic Red Iron Oxide Pigment
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3722-05(2011)
Title:
Standard Specification for Natural Red and Brown Iron Oxide Pigments
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E983-94(1999)
Title:
Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D3872-05(2011)
Title:
Standard Test Method for Ferrous Iron in Iron Oxides
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3926-05(2011)
Title:
Standard Test Methods for Percent Solids in Titanium Dioxide Slurries
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4198-82(2011)
Title:
Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4200-82(2011)
Title:
Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5316-98(2011)
Title:
Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1705-11
Title:
Standard Terminology Relating to Biotechnology
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1549-94(2011)
Title:
Standard Terminology Relating to Underwater Search, Rescue, and Recovery Activities (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1960-11
Title:
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B434-06(2011)
Title:
Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B435-06(2011)
Title:
Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E984-95(2001)
Title:
Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM B535-06(2011)
Title:
Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B572-06(2011)
Title:
Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B573-06(2011)
Title:
Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B621-02(2011)
Title:
Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B637-06(2011)
Title:
Standard Specification for Precipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock for High-Temperature Service
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B718-00(2011)
Title:
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B722-06(2011)
Title:
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube
Organization: ASTM International
Year: 2006
Status: Inactive
ASTM B726-02(2011)
Title:
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B805-06(2011)
Title:
Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B814-06(2011)
Title:
Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E985-00e1
Title:
Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM B815-02(2011)
Title:
Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B872-06(2011)
Title:
Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2259-02(2011)
Title:
Standard Test Method for Shrinkage of Yarns
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2724-07(2011)
Title:
Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3107-07(2011)
Title:
Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3787-07(2011)
Title:
Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B92/B92M-11
Title:
Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C67-11
Title:
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1400-11
Title:
Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1417-11
Title:
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E986-97
Title:
Standard Practice for Scanning Electron Microscope Beam Size Characterization
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM C1417M-11
Title:
Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7269/D7269M-11
Title:
Standard Test Methods for Tensile Testing of Aramid Yarns
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2501-11
Title:
Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A182/A182M-11
Title:
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A914/A914M-92(2011)
Title:
Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A921/A921M-93(2011)
Title:
Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A940/A940M-06(2011)
Title:
Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A983/A983M-06(2011)
Title:
Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A986/A986M-01(2011)
Title:
Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C156-11
Title:
Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E987-88(2001)
Title:
Standard Test Methods for Deglazing Force of Fenestration Products
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM C309-11
Title:
Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1315-11
Title:
Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2544-11a
Title:
Standard Terminology for Three-Dimensional (3D) Imaging Systems
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2816-11
Title:
Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F710-11
Title:
Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F833-11
Title:
Standard Consumer Safety Performance Specification for Carriages and Strollers
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1932-98(2011)
Title:
Standard Test Method for Measuring Sleeping Bag Loft
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1933-98(2011)
Title:
Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1934-98(2011)
Title:
Standard Test Method for Weighing a Backpacking or Mountaineering Tent
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1935-01(2011)
Title:
Standard Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E988-96(2002)
Title:
Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples (Withdrawn 2011)
Organization: ASTM International
Year: 1996
Status: Inactive
ASTM C40/C40M-11
Title:
Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C55-11
Title:
Standard Specification for Concrete Building Brick
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C90-11a
Title:
Standard Specification for Loadbearing Concrete Masonry Units
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C129-11
Title:
Standard Specification for Nonloadbearing Concrete Masonry Units
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1314-11
Title:
Standard Test Method for Compressive Strength of Masonry Prisms
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1372-11
Title:
Standard Specification for Dry-Cast Segmental Retaining Wall Units
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1634-11
Title:
Standard Specification for Concrete Facing Brick
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E473-11
Title:
Standard Terminology Relating to Thermal Analysis and Rheology
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E759-92(2011)
Title:
Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1142-11
Title:
Standard Terminology Relating to Thermophysical Properties
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E989-89(1999)
Title:
Standard Classification for Determination of Impact Insulation Class (IIC)
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM E2820-11
Title:
Standard Test Method for Evaluating Thermal EMF Properties of Base-Metal Thermocouple Connectors
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1970/D1970M-11
Title:
Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B370-11
Title:
Standard Specification for Copper Sheet and Strip for Building Construction
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C776-06(2011)
Title:
Standard Specification for Sintered Uranium Dioxide Pellets
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1068-03(2011)
Title:
Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1156-03(2011)
Title:
Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1188-04(2011)
Title:
Standard Guide for Establishing a Quality Assurance Program for Uranium Conversion Facilities (Withdrawn 2017)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1189-11
Title:
Standard Guide to Procedures for Calibrating Automatic Pedestrian SNM Monitors
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1297-03(2011)
Title:
Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1380-04(2011)
Title:
Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry (Withdrawn 2018)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E990-98
Title:
Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
Organization: ASTM International
Year: 1992
Status: Inactive
ASTM C1413-05(2011)
Title:
Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1430-07(2011)e1
Title:
Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1474-00(2011)
Title:
Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1508-01(2011)
Title:
Standard Test Method for Determination of Bromine and Chlorine in UF<sub>6</sub> and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1716/C1716M-11
Title:
Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4434/D4434M-11
Title:
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6722-11
Title:
Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7672-11
Title:
Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E45-11
Title:
Standard Test Methods for Determining the Inclusion Content of Steel
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2593-11
Title:
Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B2-00
Title:
Standard Specification for Medium-Hard-Drawn Copper Wire
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM E991-98
Title:
Standard Practice for Color Measurement of Fluorescent Specimens
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM F1717-11
Title:
Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3319-11
Title:
Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2790-11
Title:
Standard Guide for Identifying and Complying With Continuing Obligations
Organization: ASTM International
Year: 2011
Status: Active
ASTM E2835-11
Title:
Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3885-07a(2011)
Title:
Standard Test Method for Abrasion Resistance of Textile Fabrics (Flexing and Abrasion Method)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3886-99(2011)e1
Title:
Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4685-07(2011)e1
Title:
Standard Test Method for Pile Fabric Abrasion
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4851-07(2011)
Title:
Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F835M-11
Title:
Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) (Withdrawn 2015)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7566-11
Title:
Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E992-84(1989)E01
Title:
Practice for Determination of Fracture Toughness of Steels Using Equivalent Energy Methodology (Withdrawn 1997)
Organization: ASTM International
Year: 1988
Status: Inactive
ASTM A453/A453M-10e1
Title:
Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
Organization: ASTM International
Year: 2010
Status: Inactive
ASTM A959-11
Title:
Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B917/B917M-11
Title:
Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C32-11
Title:
Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C645-11
Title:
Standard Specification for Nonstructural Steel Framing Members
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C757-06(2011)e1
Title:
Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C955-11
Title:
Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1007-11
Title:
Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1167-11
Title:
Standard Specification for Clay Roof Tiles
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1195-03(2011)
Title:
Standard Test Method for Absorption of Architectural Cast Stone
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E993-01
Title:
Standard Test Method for Evaluation of Delayed Contact Hypersensitivity
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM C1363-11
Title:
Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1677-11
Title:
Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3018/D3018M-11
Title:
Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3455-11
Title:
Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7713-11
Title:
Standard Specification for Aqueous Engine Coolant Grade Glycol (53% Nominal)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E430-11
Title:
Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F406-11
Title:
Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F770-11
Title:
Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B209-10
Title:
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
Organization: ASTM International
Year: 2010
Status: Inactive
ASTM C889-11
Title:
Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd<sub>2</sub>O<sub>3</sub>) Powder
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E994-95
Title:
Standard Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition (Withdrawn 2004)
Organization: ASTM International
Year: 1994
Status: Inactive
ASTM C1255-11
Title:
Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A802/A802M-95(2010)e1
Title:
Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
Organization: ASTM International
Year: 2010
Status: Inactive
ASTM B177/B177M-11
Title:
Standard Guide for Engineering Chromium Electroplating
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B969/B969M-11
Title:
Standard Specification for Aluminum-Alloy Castings Produced by the Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1267-11
Title:
Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D16-11a
Title:
Standard Terminology for Paint, Related Coatings, Materials, and Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D344-11
Title:
Standard Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1187/D1187M-97(2011)e1
Title:
Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1981-11
Title:
Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2363-79(2011)
Title:
Standard Test Methods for Hydroxypropyl Methylcellulose
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E995-97
Title:
Standard Guide for Background Subtraction Techniques in Auger Electron and X-ray Photoelectron Spectroscopy
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D2805-11
Title:
Standard Test Method for Hiding Power of Paints by Reflectometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4887/D4887M-11
Title:
Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5078/D5078M-11
Title:
Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6152/D6152M-99(2011)e1
Title:
Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6432-11
Title:
Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6493-11
Title:
Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6579-11
Title:
Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7588-11
Title:
Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7727-11
Title:
Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7731-11
Title:
Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E996-94(1999)
Title:
Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM E473-11a
Title:
Standard Terminology Relating to Thermal Analysis and Rheology
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E482-11
Title:
Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance, E706 (IID)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E523-11
Title:
Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1019-11
Title:
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1638-11
Title:
Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2065-11
Title:
Standard Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2793-10e1
Title:
Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
Organization: ASTM International
Year: 2010
Status: Inactive
ASTM F448-11
Title:
Test Method for Measuring Steady-State Primary Photocurrent
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1263-11
Title:
Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2730/F2730M-11
Title:
Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E997-01
Title:
Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM F2889-11
Title:
Standard Practice for Assessing Language Proficiency
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM UOP981-11
Title:
Trace Nitrogen in Liquid Hydrocarbons by Oxidative Combustion with Chemiluminescence Detection
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5430-07(2011)
Title:
Standard Test Methods for Visually Inspecting and Grading Fabrics
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6207-03(2011)
Title:
Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6612-00(2011)
Title:
Standard Test Method for Yarn Number and Yarn Number Variability Using Automated Tester
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6614-07(2011)
Title:
Standard Test Method for Stretch Properties of Textile Fabrics - CRE Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6770-07(2011)
Title:
Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6775-02(2011)
Title:
Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6797-07(2011)
Title:
Standard Test Method for Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6828-02(2011)
Title:
Standard Test Method for Stiffness of Fabric by Blade/Slot Procedure
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E998-84(1999)
Title:
Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM E266-11
Title:
Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Aluminum
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F7-95(2011)
Title:
Standard Specification for Aluminum Oxide Powder
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F44-95(2011)
Title:
Standard Specification for Metallized Surfaces on Ceramic
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F384-06(2011)
Title:
Standard Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F732-00(2011)
Title:
Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F921-10(2011)
Title:
Standard Terminology Relating to Hemostatic Forceps
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1078-10(2011)
Title:
Standard Terminology for Surgical Scissors<span class='unicode'>—</span>Inserted and Non-Inserted Blades
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1238-95(2011)
Title:
Standard Specification for Refractory Silicide Sputtering Targets for Microelectronic Applications (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1367-98(2011)
Title:
Standard Specification for Chromium Sputtering Targets for Thin Film Applications (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1512-94(2011)
Title:
Standard Practice for Ultrasonic C-Scan Bond Evaluation of Sputtering Target-Backing Plate Assemblies (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E999-99
Title:
Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM F1513-99(2011)
Title:
Standard Specification for Pure Aluminum (Unalloyed) Source Material for Electronic Thin Film Applications (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1594-95(2011)
Title:
Standard Specification for Pure Aluminum (Unalloyed) Source Material for Vacuum Coating Applications (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1684-06(2011)
Title:
Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1761-00(2011)
Title:
Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1874-98(2011)
Title:
Standard Test Method for Bend Testing of Needles Used in Surgical Sutures (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1894-98(2011)
Title:
Test Method for Quantifying Tungsten Silicide Semiconductor Process Films for Composition and Thickness (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2113-01(2011)
Title:
Standard Guide for Analysis and Reporting the Impurity Content and Grade of High Purity Metallic Sputtering Targets for Electronic Thin Film Applications (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2405-04(2011)
Title:
Standard Test Method for Trace Metallic Impurities in High Purity Copper by High-Mass-Resolution Glow Discharge Mass Spectrometer (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2537-06(2011)
Title:
Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1807-11ae1
Title:
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1000-98
Title:
Standard Guide for Radioscopy
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM C119-11
Title:
Standard Terminology Relating to Dimension Stone
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C926-11
Title:
Standard Specification for Application of Portland Cement-Based Plaster
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1018-11
Title:
Standard Test Method for Hydrogen In Petroleum Fractions
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1048-11
Title:
Standard Specification for Rubber Insulating Blankets
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1091-11
Title:
Standard Test Methods for Phosphorus in Lubricating Oils and Additives
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E720-11
Title:
Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E942-96(2011)
Title:
Standard Guide for Simulation of Helium Effects in Irradiated Metals
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1114-09e1
Title:
Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
Organization: ASTM International
Year: 2009
Status: Inactive
ASTM E1251-11
Title:
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F19-11
Title:
Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B3-01
Title:
Standard Specification for Soft or Annealed Copper Wire
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM E1001-99a
Title:
Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM F2502-11
Title:
Standard Specification and Test Methods for Absorbable Plates and Screws for Internal Fixation Implants
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C266-08e1
Title:
Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1120-11e1
Title:
Standard Test Method for Boiling Point of Engine Coolants
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2628-91(2011)
Title:
Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4885-01(2011)
Title:
Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5323-92(2011)
Title:
Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5493-06(2011)
Title:
Standard Test Method for Permittivity of Geotextiles Under Load
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5494-93(2011)
Title:
Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5514-06(2011)
Title:
Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5567-94(2011)
Title:
Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1002-96
Title:
Standard Test Method for Leaks Using Ultrasonics
Organization: ASTM International
Year: 1996
Status: Inactive
ASTM D5641-94(2011)
Title:
Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5820-95(2011)
Title:
Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5886-95(2011)
Title:
Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5888-06(2011)
Title:
Standard Guide for Storage and Handling of Geosynthetic Clay Liners
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6088-06(2011)
Title:
Standard Practice for Installation of Geocomposite Pavement Drains
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6365-99(2011)
Title:
Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6454-99(2011)
Title:
Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6524-00(2011)
Title:
Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6574-00(2011)
Title:
Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6636-01(2011)
Title:
Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1003-95(2000)
Title:
Standard Test Method for Hydrostatic Leak Testing
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D6707-06(2011)
Title:
Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6917-03(2011)
Title:
Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7174-05(2011)
Title:
Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7176-06(2011)
Title:
Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7178-06(2011)
Title:
Standard Practice for Determining the Number of Constrictions "<bdit>m</bdit>" of Non-Woven Geotextiles as a Complementary Filtration Property
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7239-06(2011)
Title:
Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7240-06(2011)
Title:
Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7272-06(2011)
Title:
Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7274-06a(2011)
Title:
Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1004-99
Title:
Standard Practice for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM E215-11
Title:
Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E376-11
Title:
Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E493/E493M-11
Title:
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E498/E498M-11
Title:
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode <a href="#fn00002"></a>
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E499/E499M-11
Title:
Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode <a href="#fn00002"></a>
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E515-11
Title:
Standard Practice for Leaks Using Bubble Emission Techniques
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1002-11
Title:
Standard Practice for Leaks Using Ultrasonics
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1067/E1067M-11
Title:
Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1142-11a
Title:
Standard Terminology Relating to Thermophysical Properties
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1316-11a
Title:
Standard Terminology for Nondestructive Examinations
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1005-97
Title:
Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance, E 706(IIIA)
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM E1441-11
Title:
Standard Guide for Computed Tomography (CT) Imaging
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1570-11
Title:
Standard Practice for Computed Tomographic (CT) Examination
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1603/E1603M-11
Title:
Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1618-11
Title:
Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1961-11
Title:
Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2024/E2024M-11
Title:
Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2259-03a(2011)
Title:
Standard Guide for Archiving and Retrieving ITS-Generated Data
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2465-11
Title:
Standard Test Method for Analysis of Ni-Base Alloys by Wavelength-Dispersive X-Ray Fluorescence Spectrometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2479-11
Title:
Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (L<sub>CR</sub>) Waves
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2764-11
Title:
Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1006-96
Title:
Standard Practice for Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II)
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM F1154-11
Title:
Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1383-11
Title:
Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1407-11
Title:
Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation-Permeation Cup Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2419-11
Title:
Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2731-11
Title:
Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2853-10e1
Title:
Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Mon...
Organization: ASTM International
Year: 2010
Status: Inactive
ASTM D5454-11
Title:
Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7722-11
Title:
Standard Terminology Relating to Industrial Textile Stitches and Seams
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1112-00(2011)
Title:
Standard Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2818-11
Title:
Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1007-97
Title:
Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM F2062-00(2011)
Title:
Standard Specification for Square Drive Interconnections on Surgical Instruments
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C564-11
Title:
Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C787-11
Title:
Standard Specification for Uranium Hexafluoride for Enrichment
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C836/C836M-11a
Title:
Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1655-11
Title:
Standard Specification for Aviation Turbine Fuels
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2201-99(2011)
Title:
Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3168-85(2011)
Title:
Standard Practice for Qualitative Identification of Polymers in Emulsion Paints
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7213-11
Title:
Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615°C by Gas Chromatography
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E228-11
Title:
Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1008-97
Title:
Standard Practice for Installation, Inspection, and Maintenance of Valve Body Pressure Relief Methods for Geothermal and Other High-Temperature Liquid Applications
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM E866-11
Title:
Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1492-11
Title:
Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1545-11
Title:
Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1577-11
Title:
Standard Guide for Reporting of Ion Beam Parameters Used in Surface Analysis (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1826-11
Title:
Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2126-11
Title:
Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2347-11
Title:
Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2387-05(2011)
Title:
Standard Practice for Goniometric Optical Scatter Measurements
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2291-11
Title:
Standard Practice for Design of Amusement Rides and Devices
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM UOP990-11
Title:
Organic Analysis of Distillate by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection
Organization: ASTM International
Year: 2011
Status: Active
ASTM E1009-95(2000)
Title:
Standard Practice for Evaluating an Optical Emission Vacuum Spectrometer to Analyze Carbon and Low-Alloy Steel
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM A230/A230M-05(2011)e1
Title:
Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A232/A232M-05(2011)e1
Title:
Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C311-11a
Title:
Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1438-11
Title:
Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1453-00(2011)
Title:
Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D974-11
Title:
Standard Test Method for Acid and Base Number by Color-Indicator Titration
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1839-11
Title:
Standard Test Method for Amyl Nitrate in Diesel Fuels
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2435/D2435M-11
Title:
Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2866-11
Title:
Standard Test Method for Total Ash Content of Activated Carbon
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3242-11
Title:
Standard Test Method for Acidity in Aviation Turbine Fuel
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1010-84(2000)
Title:
Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D3246-11
Title:
Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3339-11
Title:
Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4046-11
Title:
Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5384-11
Title:
Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5708-11
Title:
Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5770-11
Title:
Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5984-11
Title:
Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7111-11
Title:
Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7169-11
Title:
Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2915-11
Title:
Standard Specification for Additive Manufacturing File Format (AMF)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B5-00
Title:
Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM E1011-96(2000)e1
Title:
Specification for Sulfuric Acid (Withdrawn 2001)
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM C94/C94M-11a
Title:
Standard Specification for Ready-Mixed Concrete
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C125-11
Title:
Standard Terminology Relating to Concrete and Concrete Aggregates
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C126-11
Title:
Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C144-11
Title:
Standard Specification for Aggregate for Masonry Mortar
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C404-11
Title:
Standard Specification for Aggregates for Masonry Grout
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1074-11
Title:
Standard Practice for Estimating Concrete Strength<br> by the Maturity Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1088-11
Title:
Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1396/C1396M-11
Title:
Standard Specification for Gypsum Board
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1540-11
Title:
Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2896-11
Title:
Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1012-99
Title:
Standard Practice for Verification of Specimen Alignment Under Tensile Loading
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D4739-11
Title:
Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E84-11
Title:
Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1717-11a
Title:
Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B846-11a
Title:
Standard Terminology for Copper and Copper Alloys
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6745-06(2011)
Title:
Standard Test Method for Linear Thermal Expansion of Electrode Carbons
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E539-11
Title:
Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1999-11
Title:
Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2593-11e1
Title:
Standard Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2823-11
Title:
Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F390-11
Title:
Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array (Withdrawn 2020)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1013-93(1997)
Title:
Terminology Relating to Computerized Systems (Withdrawn 2000)
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM C207-06(2011)
Title:
Standard Specification for Hydrated Lime for Masonry Purposes
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C593-06(2011)
Title:
Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C830-00(2011)
Title:
Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C911-06(2011)
Title:
Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1529-06a(2011)
Title:
Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1629/C1629M-06(2011)
Title:
Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1655-06(2011)
Title:
Standard Classification of Fireclay and High-Alumina Mortars
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D841-11
Title:
Standard Specification for Nitration Grade Toluene
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D850-11
Title:
Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4530-11
Title:
Standard Test Method for Determination of Carbon Residue (Micro Method)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1014-84(2000)
Title:
Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5004-11
Title:
Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5304-11
Title:
Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5454-11e1
Title:
Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6249-06(2011)
Title:
Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6745-11
Title:
Standard Test Method for Linear Thermal Expansion of Electrode Carbons
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7124-11
Title:
Standard Specification for Benzene for Use with Zeolite Based Catalysts
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E647-11
Title:
Standard Test Method for Measurement of Fatigue Crack Growth Rates
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2137-06(2011)
Title:
Standard Guide for Estimating Monetary Costs and Liabilities for Environmental Matters
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2173-07(2011)
Title:
Standard Guide for Disclosure of Environmental Liabilities
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B69-11
Title:
Standard Specification for Rolled Zinc
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1016-96(2002)
Title:
Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers
Organization: ASTM International
Year: 1996
Status: Inactive
ASTM B86-11
Title:
Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1751-11
Title:
Standard Guide for Sampling Radioactive Tank Waste
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7607-11
Title:
Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7636/D7636M-11
Title:
Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
Organization: ASTM International
Year: 2011
Status: Active
ASTM E60-11
Title:
Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E84-11a
Title:
Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E329-11a
Title:
Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2824-11
Title:
Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1960-11e1
Title:
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2894-11
Title:
Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1017-88(1994)
Title:
Standard Specification for Generic Performance Requirements for Exterior Residential Window Assemblies (Withdrawn 2003)
Organization: ASTM International
Year: 1993
Status: Inactive
ASTM C761-11
Title:
Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D97-11
Title:
Standard Test Method for Pour Point of Petroleum Products
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1670/D1670M-04(2011)e1
Title:
Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2797/D2797M-11a
Title:
Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2798-11a
Title:
Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4869/D4869M-05(2011)e1
Title:
Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5853-11
Title:
Standard Test Method for Pour Point of Crude Oils
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6439-11
Title:
Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6511/D6511M-06(2011)e1
Title:
Standard Test Methods for Solvent Bearing Bituminous Compounds
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6791-11
Title:
Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1018-01
Title:
Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB)
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM E488/E488M-10
Title:
Standard Test Methods for Strength of Anchors in Concrete Elements
Organization: ASTM International
Year: 2010
Status: Inactive
ASTM E2425-11
Title:
Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2634-11
Title:
Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2812-11
Title:
Standard Practice for Uniform Data Management in Asset Management Records Systems
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2814-11
Title:
Standard Guide for Industrial Woven Wire Filter Cloth
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1920-11
Title:
Standard Test Method for Performance of Rack Conveyor, Commercial Dishwashing Machines
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2093-11
Title:
Standard Test Method for Performance of Rack Ovens
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2137-11
Title:
Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2269-11
Title:
Standard Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2337-11
Title:
Standard Test Method for Treestand Fall Arrest System
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1019-00
Title:
Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM F2756-11
Title:
Standard Test Method for Determining Energy Consumption of Vacuum Cleaners
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2839-11
Title:
Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2137-11
Title:
Standard Test Methods for Rubber Property<char: emdash>Brittleness Point of Flexible Polymers and Coated Fabrics
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2500-11
Title:
Standard Test Method for Cloud Point of Petroleum Products
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3184-11
Title:
Standard Practice for Rubber<char: emdash>Evaluation of NR (Natural Rubber)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4482-11
Title:
Test Method for Rubber Property<char: emdash>Extension Cycling Fatigue
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5548-05e2
Title:
Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
Organization: ASTM International
Year: 2005
Status: Inactive
ASTM D7723-11
Title:
Standard Test Method for Rubber Property<char: emdash>Macro-Dispersion of Fillers in Compounds
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E432-91(2011)
Title:
Standard Guide for Selection of a Leak Testing Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2775-11
Title:
Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1020-96
Title:
Standard Practice for Reporting Incidents
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM F2140-11
Title:
Standard Test Method for Performance of Hot Food Holding Cabinets
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2801-11
Title:
Standard Practice for Paintball Player Safety Briefing
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A1000/A1000M-11
Title:
Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B348-11
Title:
Standard Specification for Titanium and Titanium Alloy Bars and Billets
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C547-11
Title:
Standard Specification for Mineral Fiber Pipe Insulation
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1514-04(2011)
Title:
Standard Test Method for Carbon Black<char: emdash>Sieve Residue
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1618-99(2011)
Title:
Standard Test Method for Carbon Black Extractables<char: emdash>Transmittance of Toluene Extract
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1766-05(2011)
Title:
Standard Test Method for Rubber Chemicals<char: emdash>Solubility
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1900-06(2011)
Title:
Standard Practice for Carbon Black<char: emdash>Sampling Bulk Shipments
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4527-99(2011)
Title:
Standard Test Method for Carbon Black<char: emdash>Solvent Extractables
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1021-95(2001)
Title:
Standard Test Methods for Measuring Spectral Response of Photovoltaic Cells
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM D5406-93(2011)
Title:
Standard Practice for Rubber<char: emdash>Calculation of Producer's Process Performance Indexes
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5992-96(2011)
Title:
Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6085-97(2011)
Title:
Standard Practice for Sampling in Rubber Testing<char: emdash>Terminology and Basic Concepts
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1870-11
Title:
Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F363-99(2011)
Title:
Standard Test Method for Corrosion Testing of Gaskets
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F877-11
Title:
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2378-05(2011)
Title:
Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2468-05(2011)
Title:
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B857-11
Title:
Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B6-00
Title:
Standard Specification for Zinc
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM E1022-94
Title:
Standard Guide for Conducting Bioconcentration Tests with Fishes and Saltwater Bivalve Mollusks
Organization: ASTM International
Year: 1993
Status: Inactive
ASTM E2448-11
Title:
Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1363-07(2011)
Title:
Standard Guide for Reduction of Risk of Injury for Archery Overdraws
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1832-07(2011)
Title:
Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2060-00(2011)
Title:
Standard Guide for Maintaining Cool Season Turfgrasses on Athletic Fields
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C651-11
Title:
Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1126-11e1
Title:
Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1193-11
Title:
Standard Guide for Use of Joint Sealants
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4483-05a(2011)
Title:
Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4806-11a
Title:
Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5762-11
Title:
Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1023-84(1996)
Title:
Standard Guide for Assessing the Hazard of a Material to Aquatic Organisms and Their Uses
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM F495-99a(2011)
Title:
Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2880-11a
Title:
Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes <span class='unicode'>¾</span> in. to 65 in.
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D664-11
Title:
Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D2013/D2013M-11
Title:
Standard Practice for Preparing Coal Samples for Analysis
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4814-11
Title:
Standard Specification for Automotive Spark-Ignition Engine Fuel
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1903-11
Title:
Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C25-11
Title:
Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C51-11
Title:
Standard Terminology Relating to Lime and Limestone (as used by the Industry)
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM A888-11
Title:
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D86-11
Title:
Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1024-97
Title:
Standard Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D6751-11b
Title:
Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F1411-11
Title:
Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B209M-10
Title:
Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
Organization: ASTM International
Year: 2010
Status: Inactive
ASTM C1234-11
Title:
Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM C1303/C1303M-11a
Title:
Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5194-11a
Title:
Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7360-11
Title:
Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E2091-11
Title:
Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM F2640-11
Title:
Standard Consumer Safety Specification for Booster Seats
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM B456-11
Title:
Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus<br> Chromium and Nickel Plus Chromium
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1025-98
Title:
Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM C1224-11
Title:
Standard Specification for Reflective Insulation for Building Applications
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D979/D979M-11
Title:
Standard Practice for Sampling Bituminous Paving Mixtures
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3744/D3744M-11
Title:
Standard Test Method for Aggregate Durability Index
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D3910-11
Title:
Standard Practices for Design, Testing, and Construction of Slurry Seal
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D4533-11
Title:
Standard Test Method for Trapezoid Tearing Strength of Geotextiles
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D5798-11
Title:
Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6627/D6627M-11
Title:
Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6752/D6752M-11
Title:
Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D6857/D6857M-11
Title:
Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7000-11
Title:
Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM E1026-95
Title:
Standard Practice for Using the Fricke Reference Standard Dosimetry System
Organization: ASTM International
Year: 1994
Status: Inactive
ASTM D7063/D7063M-11
Title:
Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D7168-11
Title:
Standard Test Method for <sup>99</sup>Tc in Water by Solid Phase Extraction Disk
Organization: ASTM International
Year: 2011
Status: Inactive
See more:
1
50
100
150
160
170
180
190
200
210
214
215
216
217
218
219
220
221
222
223
224
225
226
230
240
250
260
270
280
300
350
400
450
467