ASTM D8193-26
Title:
Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8198-18(2024)
Title:
Standard Specification for Hydraulically Applied 100?% Wood Fiber Mulches
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8199-20(2025)
Title:
Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8202-18(2024)
Title:
Standard Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8211-24
Title:
Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8211-24a
Title:
Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8272-19(2026)
Title:
Standard Guide for Development and Optimization of D19 Chemical Analysis Methods Intended for EPA Compliance Reporting
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8297/D8297M-23
Title:
Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8298/D8298M-23
Title:
Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Continuous Rainfall-Induced Erosion Using a Tilted Bed Slope
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8326-25
Title:
Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8342/D8342M-21(2026)
Title:
Standard Test Method for Measuring the Probability of a Full Length Burn on a Cannabis/Hemp Pre-roll
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8344-24
Title:
Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8354-25
Title:
Standard Test Method for Flammability of Electrical Insulating Materials Intended for Wires or Cables When Burning in a Vertical Configuration
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8355-25
Title:
Standard Test Methods for Flammability of Electrical Insulating Materials Used for Sleeving or Tubing
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8358-25
Title:
Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8404-26
Title:
Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
Organization: ASTM International
Year: 2026
Status: Inactive
ASTM D8404-26a
Title:
Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8421-24
Title:
Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM D8421-25
Title:
Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8456-26
Title:
Standard Test Method for Determination of Nitrosamines in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8502-25
Title:
Standard Guide for Field Collection of Airborne Particulate Samples for Subsequent Determination of Lead Content
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8535-23
Title:
Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Soil/Biosolid Matrices by Solvent Extraction, Filtering, and Followed by Liquid Chromatography Tandem Mass ...
Organization: ASTM International
Year: 2023
Status: Active
ASTM D8536-25
Title:
Standard Test Method for Available Sulfide in Water by Gas Extraction
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8543-23
Title:
Standard Test Method for Determination of Pesticides and Polychlorinated Biphenyls (PCBs) in Aqueous Solution by a Tandem Gas Chromatography/Mass Spectrometry/Mass Spectrometry (GC/MS/MS)
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM D8543-24
Title:
Standard Test Method for Determination of Pesticides and Polychlorinated Biphenyls (PCBs) in Aqueous Solution by a Tandem Gas Chromatography/Mass Spectrometry/Mass Spectrometry (GC/MS/MS)
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8548-25
Title:
Standard Test Method for Measuring the Erosion Function of a Soil in an Erosion Function Apparatus
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8550-25
Title:
Standard Test Method for Determination of Infiltration Rate and Calculating Field Hydraulic Conductivity of Field Soils by Sealed Single-Ring Infiltrometer and Multiple Pressure Head Procedure
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8559-24
Title:
Standard Specification for Ambient Outdoor Air Quality Sensors and Sensor-Based Instruments for Portable and Fixed-Point Measurement
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8569-26
Title:
Standard Practice for Surface Sampling of Non-Volatile and Semi-Volatile Organic Chemicals for Worker Protection
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8570-24
Title:
Standard Practice for Vented and Fugitive Gaseous Emissions Destruction by Thermal Oxidizer
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8571-24
Title:
Standard Practice for Detection of Hydrocarbon Liquids in Soils by Fluorescence with an Optical Imaging Profiler Using Direct Push Methods
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8574-25
Title:
Standard Test Method for Determination of Select Pesticides and Herbicides in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8596-24
Title:
Standard Test Method for Bioavailable Aluminum in Water with Suspended Solids
Organization: ASTM International
Year: 2024
Status: Active
ASTM D8606-26
Title:
Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Modified Continuously Closed Cup (MCCCFP) Tester
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8608-25
Title:
Standard Test Method for Flame Resistance of Leather (12/60 Second Vertical Burn Test)
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM D8608/D8608M-25e1
Title:
Standard Test Method for Flame Resistance of Leather (12/60 Second Vertical Burn Test)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8618-25
Title:
Standard Test Method for Determination of the Degree of Disintegration of Items Under Defined In-Field Composting Conditions Using Article Dosing
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8619-25
Title:
Standard Test Method for Determination of the Degree of Disintegration of Items Under Defined In-Field Composting Conditions Using Containers
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8623-25
Title:
Standard Practice for Environmental Odor Screening for Single, Character-Defining Odorants; Using Gas Chromatography-Mass Spectrometry Olfactometry (GC-MS-O) Analysis and On-Instrument Odor-Match...
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8624-25
Title:
Standard Test Method for Evaluating CO<inf>2</inf> Sensors or Sensor Systems Used in Indoor Applications
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8628-25
Title:
Standard Test Method for Analytical Procedure for the Analysis of Ultrashort Chain Perfluoroalkyl Substances (PFAS) in Aqueous Samples by Liquid Chromatography/Mass Spectrometry (LC-MS/MS)
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8646-26
Title:
Standard Test Method for Calculating and Reporting the Estimated Biodegradation Time of Non-Persistent Plastics Designed for Use in Aquatic Environments
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8647-25
Title:
Standard Test Methods for Flammability of Rigid Plastic Materials Used for Electrical Insulation
Organization: ASTM International
Year: 2025
Status: Active
ASTM D8649-26
Title:
Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8654-26
Title:
Standard Practice for Preparing Life-Cycle Assessments for Recovered Carbon Black (rCB) Products (Interim Product Category Rules)
Organization: ASTM International
Year: 2026
Status: Active
ASTM D8662/D8662M-26
Title:
Standard Specification for Plastic Temporary Ceiling Construction Barriers for Installation Below Automatic Sprinklers
Organization: ASTM International
Year: 2026
Status: Active
ASTM E84-23d
Title:
Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E84-24
Title:
Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E84-25
Title:
Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E84-26
Title:
Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2026
Status: Inactive
ASTM E84-26a
Title:
Standard Test Method for Surface Burning Characteristics of Building Materials
Organization: ASTM International
Year: 2026
Status: Active
ASTM E108-24
Title:
Standard Test Methods for Fire Tests of Roof Coverings
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E108-25
Title:
Standard Test Methods for Fire Tests of Roof Coverings
Organization: ASTM International
Year: 2024
Status: Active
ASTM E119-23
Title:
Standard Test Methods for Fire Tests of Building Construction and Materials
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E119-24
Title:
Standard Test Methods for Fire Tests of Building Construction and Materials
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E119-26
Title:
Standard Test Methods for Fire Tests of Building Construction and Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E136-24
Title:
Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E136-24a
Title:
Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E136-24b
Title:
Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E136-24c
Title:
Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E136-26
Title:
Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
Organization: ASTM International
Year: 2025
Status: Active
ASTM E162-24
Title:
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E162-25
Title:
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E162-25a
Title:
Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
Organization: ASTM International
Year: 2025
Status: Active
ASTM E176-24
Title:
Standard Terminology of Fire Standards
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E176-24a
Title:
Standard Terminology of Fire Standards
Organization: ASTM International
Year: 2024
Status: Active
ASTM E531-24
Title:
Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E535-23
Title:
Standard Practice for Preparation of Fire-Test-Response Standards
Organization: ASTM International
Year: 2023
Status: Active
ASTM E544-24
Title:
Standard Practice for Referencing Suprathreshold Odor Intensity
Organization: ASTM International
Year: 2024
Status: Active
ASTM E603-25
Title:
Standard Guide for Room Fire Experiments
Organization: ASTM International
Year: 2025
Status: Active
ASTM E680-79(2024)
Title:
Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E741-24
Title:
Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
Organization: ASTM International
Year: 2024
Status: Active
ASTM E800-26
Title:
Standard Guide for Measurement of Gases Present or Generated During Fires
Organization: ASTM International
Year: 2026
Status: Active
ASTM E814-24
Title:
Standard Test Method for Fire Tests of Penetration Firestop Systems
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E814-26
Title:
Standard Test Method for Fire Tests of Penetration Firestop Systems
Organization: ASTM International
Year: 2026
Status: Active
ASTM E853-25
Title:
Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
Organization: ASTM International
Year: 2025
Status: Active
ASTM E854-19(2025)
Title:
Standard Test Method for Application and Analysis of Solid-State Track Recorder (SSTR) Monitors for Reactor Surveillance (Withdrawn 2025)
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E944-26
Title:
Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance
Organization: ASTM International
Year: 2026
Status: Active
ASTM E981-25
Title:
Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1108-86(2025)
Title:
Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1115-24
Title:
Standard Test Method for Evaluation of Surgical Hand Scrub Formulations
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1153-25
Title:
Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1198-24
Title:
Standard Practice for Sampling Zooplankton with Pumps
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E1198-25
Title:
Standard Practice for Sampling Zooplankton with Pumps
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1199-24
Title:
Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1200-24
Title:
Standard Practice for Preserving Zooplankton Samples
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1201-25
Title:
Standard Practice for Sampling Zooplankton with Conical Tow Nets
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1226-19(2025)
Title:
Standard Test Method for Explosibility of Dust Clouds
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1231-24
Title:
Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1248-90(2025)
Title:
Standard Practice for Shredder Explosion Protection
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1388-24
Title:
Standard Practice for Static Headspace Sampling of Vapors from Fire Debris Samples
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1432-19(2025)
Title:
Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of<brk/> Intermediate Size
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1445-08(2023)
Title:
Standard Terminology Relating to Hazard Potential of Chemicals
Organization: ASTM International
Year: 2023
Status: Active
ASTM E1491-06(2025)
Title:
Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1521-19(2025)
Title:
Standard Test Method for Liquid Holding Capacity of Granular Carriers
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1546-24
Title:
Standard Guide for Development of Fire-Hazard-Assessment Standards
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1549/E1549M-25
Title:
Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1583-25
Title:
Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1605-26
Title:
Standard Terminology Relating to Lead in Buildings
Organization: ASTM International
Year: 2026
Status: Inactive
ASTM E1605-26a
Title:
Standard Terminology Relating to Lead in Buildings
Organization: ASTM International
Year: 2026
Status: Active
ASTM E1618-25
Title:
Standard Test Method for Identification of Ignitable Liquids in Fire Debris Analysis by Gas Chromatography-Mass Spectrometry
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1644-25
Title:
Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1678-24
Title:
Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1727-24
Title:
Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1728/E1728M-24
Title:
Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1740-24
Title:
Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1760-16(2024)
Title:
Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1822-21(2025)
Title:
Standard Test Method for Fire Testing of Stacked Chairs
Organization: ASTM International
Year: 2025
Status: Active
ASTM E1908-24
Title:
Standard Practice for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1943-24
Title:
Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites
Organization: ASTM International
Year: 2024
Status: Active
ASTM E1945-21(2025)
Title:
Standard Test Method for Percent Dispersibility
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2018-23
Title:
Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E2018-24
Title:
Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2019-03(2025)
Title:
Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2029-25
Title:
Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2032-26
Title:
Standard Practice for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2057-23
Title:
Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Violence Investigations
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2072-24
Title:
Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2073-24
Title:
Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2090-12(2026)
Title:
Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2091-24
Title:
Standard Guide for Use of Activity and Use Limitations, Including Institutional and Engineering Controls
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2101-15(2020)
Title:
Standard Test Method for Measuring the Frictional Properties of Winter-Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
Organization: ASTM International
Year: 2020
Status: Inactive
ASTM E2101-15(2024)
Title:
Standard Test Method for Measuring the Frictional Properties of Winter-Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2102-24
Title:
Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2115-26
Title:
Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2119-24
Title:
Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2132-25
Title:
Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2149-25
Title:
Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2150-17(2024)
Title:
Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2174-24
Title:
Standard Practice for On-Site Inspection of Installed Firestop Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2217-12(2026)
Title:
Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2226-23
Title:
Standard Practice for Application of Hose Stream
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E2226-23a
Title:
Standard Practice for Application of Hose Stream
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E2226-24
Title:
Standard Practice for Application of Hose Stream
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2226-25
Title:
Standard Practice for Application of Hose Stream
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2231-25
Title:
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E2231-26
Title:
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2239-24
Title:
Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2247-23
Title:
Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process for Forestland or Rural Property
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2252-26
Title:
Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2257-24
Title:
Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2271/E2271M-26
Title:
Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2274-24
Title:
Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2280-25
Title:
Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E2280-25a
Title:
Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
Organization: ASTM International
Year: 2025
Status: Active
ASTM 52303-24e1
Title:
Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
Organization: ASTM International
Year: 2023
Status: Active
ASTM 52303-24
Title:
Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E2306-25
Title:
Standard Guide for Disposal of Personal Property Assets
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2307-23b
Title:
Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E2307-25
Title:
Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2307-25a
Title:
Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E2307-25b
Title:
Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2312-11(2026)
Title:
Standard Practice for Tests of Cleanroom Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2336-25
Title:
Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2348-24
Title:
Standard Guide for Framework for a Consensus-based Environmental Decision-making Process
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2350-24
Title:
Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2352-19(2026)
Title:
Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2393-24
Title:
Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2406-24
Title:
Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2458-26
Title:
Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2515-11(2026)
Title:
Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2520-26
Title:
Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2521-24
Title:
Standard Terminology for Evaluating Response Robot Capabilities
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2521-24e1
Title:
Standard Terminology for Evaluating Response Robot Capabilities
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2565-21(2026)
Title:
Standard Guide for Consensus-Based Process for an Occupational Safety and Health Standard That Includes an Occupational Exposure Guideline
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2566/E2566M-24
Title:
Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2573-24
Title:
Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2579-23b
Title:
Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2590-23
Title:
Standard Guide for Conducting Hazard Analysis-Critical Control Point (HACCP) Evaluations
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2592/E2592M-24
Title:
Standard Practice for Evaluating Response Robots: Logistics: Packaging and Setup Time
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2601-23
Title:
Standard Practice for Radiological and Nuclear Emergency Response
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2637-17(2024)
Title:
Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification <astmref design="E2150"/>
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2639-12(2025)
Title:
Standard Test Method for Blast Resistance of Trash Receptacles
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2656-25
Title:
Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2677-26
Title:
Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2686-09(2026)
Title:
Standard Test Method for Volatile Organic Compound (VOC) Solvents Absorbed/Adsorbed By Simulated Soil Impacted by Pesticide Emulsifiable Concentrate (EC) Applications
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2688-23
Title:
Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E2688-24
Title:
Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2706-26
Title:
Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2717-18(2025)
Title:
Standard Practice for Estimating the Environmental Load of Residential Wastewater
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2727-24
Title:
Standard Practice for Assessment of Rainwater Quality
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2740-12(2025)
Title:
Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2749-23a
Title:
Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E2749-24
Title:
Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2749-24a
Title:
Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2749-25
Title:
Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2752-25
Title:
Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2768-25
Title:
Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2770-25
Title:
Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2771-11(2019)e1
Title:
Standard Terminology for Homeland Security Applications
Organization: ASTM International
Year: 2019
Status: Inactive
ASTM E2771-24
Title:
Standard Terminology for Homeland Security Applications
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2785-25
Title:
Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E2785-25a
Title:
Standard Practice for Exposure of Firestop Materials to Various Specified Enhanced Environmental Factors
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E2785-26
Title:
Standard Practice for Exposure of Firestop Materials to Various Specified Enhanced Environmental Factors
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2786-24
Title:
Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2816-24
Title:
Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2831/E2831M-11(2025)
Title:
Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2837-23a
Title:
Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E2837-23ae1
Title:
Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2871-25
Title:
Standard Test Method for Determining Disinfectant Efficacy Against Biofilm Grown in the CDC Biofilm Reactor Using the Single Tube Method
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2874-23
Title:
Standard Test Method for Determining the Fire-Test Response Characteristics of a Building Spandrel-Panel Assembly Due to External Spread of Fire
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2875/E2875M-24
Title:
Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2875/E2875M-26
Title:
Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2893-25
Title:
Standard Guide for Greener Cleanups
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2899-24
Title:
Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2899-24e1
Title:
Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2899-24e2
Title:
Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2912-26
Title:
Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction
Organization: ASTM International
Year: 2026
Status: Active
ASTM E2913/E2913M-25
Title:
Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2914/E2914M-25
Title:
Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2920-24
Title:
Standard Guide for Recording Occupational Injuries and Illnesses
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E2920-26
Title:
Standard Guide for Recording Priority Occupational Injuries and Illnesses and Serious Injury or Fatality (SIF)-Related Serious Injuries/Illnesses and Fatalities
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2921-25
Title:
Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2923-24
Title:
Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2931-13(2025)
Title:
Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2952-24
Title:
Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED)
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2957-17(2024)
Title:
Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
Organization: ASTM International
Year: 2024
Status: Active
ASTM E2965-25
Title:
Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
Organization: ASTM International
Year: 2025
Status: Active
ASTM E2989-19a(2024)
Title:
Standard Guide for Assessment of Continued Applicability of Reaction to Fire Test Reports Used in Building Regulation
Organization: ASTM International
Year: 2023
Status: Active
ASTM E2993-23
Title:
Standard Guide for Evaluating Potential Hazard in Buildings as a Result of Methane in the Vadose Zone
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3003-25
Title:
Standard Practice for Body Armor Wearer Measurement and Fitting of Armor
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3005-24
Title:
Standard Terminology for Body Armor and Ballistic Protection
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3021/E3021M-24
Title:
Standard Guide for Evaluating the Relative Effectiveness of Building Systems to Resist the Passage of Products of Combustion Based on the Aggregation of Leakage Rates
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3027-23
Title:
Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3033-25
Title:
Standard Guide for Risk Assessment Screening for Beneficial Use of Inactive and Unregulated Solid Waste Disposal and Chemically Impacted Sites
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3066-24
Title:
Standard Practice for Evaluating Relative Sustainability Involving Energy or Chemicals from Biomass
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3068-20(2026)
Title:
Standard Test Method for Contact Measurement of Backface Deformation in Clay Backing During Body Armor Testing
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3074/E3074M-24
Title:
Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facil...
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3095-17(2024)
Title:
Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E3095-25
Title:
Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3108-18(2024)
Title:
Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3109-18(2024)
Title:
Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3131-17(2024)
Title:
Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3134-20(2024)
Title:
Standard Specification for Transportation Tunnel Structural Components and Passive Fire Protection Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3136-25
Title:
Standard Guide for Climate Resiliency in Water Resources
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3141/E3141M-24
Title:
Standard Test Method for Ballistic Resistant Shields for Law Enforcement
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3153-25
Title:
Standard Practice for Development of Multi-attribute Sustainability Standards for Building Products
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3157-25
Title:
Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3163-24
Title:
Standard Guide for Contaminated Sediment Site Risk-Based Corrective Action—Selection and Application of Analytical Methods and Test Procedures
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3187/E3187M-25
Title:
Standard Specification for Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3189-19(2025)
Title:
Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3192/E3192M-20(2026)
Title:
Standard Practice for Soft Armor Conditioning by Tumbling
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3193-23
Title:
Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS)
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3195-26
Title:
Standard Guide for Body Armor Program Management
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3197-23e1
Title:
Standard Terminology Relating to Examination of Fire Debris
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3201-25
Title:
Standard Guide for Extension of Data for Fire-Resistive Joint System Tests Conducted in Accordance with ASTM E1966
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3202-24
Title:
Standard Practice for Specimen Preparation and Mounting of Plastic Composites for Use as Deck Boards, Stair Treads, Guards or Handrails to Assess Surface Burning Characteristics
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3215-19a(2026)
Title:
Standard Practice for Certification of Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3242-23
Title:
Standard Guide for Developing Representative Background Concentrations at Sediment Sites—Data Evaluation and Development Methodologies
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E3242-25
Title:
Standard Guide for Developing Representative Background Concentrations at Sediment Sites—Data Evaluation and Development Methodologies
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3248-25
Title:
Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Conceptual Models for NAPL Emplacement and Influence on NAPL Movement
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E3248-26
Title:
Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Conceptual Models for NAPL Emplacement and Influence on NAPL Movement
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3249-25
Title:
Standard Guide for Remedial Action Resiliency to Climate Impacts
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3268-25
Title:
Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Sample Collection, Field Screening, and Handling
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3299/E3299M-24
Title:
Standard Test Methods for Compression Resistance of Helmets
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3300-26
Title:
Standard Guide for Non-Aqueous Phase Liquid (NAPL) Mobility and Migration in Sediment—Factors Affecting Ebullition and Evaluating Ebullition Activity and the Associated Ebullition-Facilitated Tra...
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3302-23
Title:
Standard Guide for PFAS Analytical Methods Selection
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E3302-25
Title:
Standard Guide for PFAS Analytical Methods Selection
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3317-25
Title:
Standard Specification for Silica-Based Sediments for the Evaluation of Stormwater Treatment Devices
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3318-24
Title:
Standard Terminology for Standards Relating to Stormwater Control Measures
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E3318-24a
Title:
Standard Terminology for Standards Relating to Stormwater Control Measures
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E3318-26
Title:
Standard Terminology for Standards Relating to Stormwater Control Measures
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3341-23
Title:
Standard Guide for General Principles of Resilience
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E3341-23a
Title:
Standard Guide for General Principles of Resilience
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3344-23
Title:
Standard Guide for Developing Representative Sediment Background Concentrations at Sediment Sites—Selection of Background Reference Areas
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM E3344-24
Title:
Standard Guide for Developing Representative Background Concentrations at Sediment Sites—Selection of Background Reference Areas
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3347/E3347M-24
Title:
Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E3347/E3347M-24a
Title:
Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E3347/E3347M-25
Title:
Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E3347/E3347M-26
Title:
Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3348/E3348M-25
Title:
Standard Guide for Body Armor for Non-Law Enforcement First Responders
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3360-25
Title:
Standard Terminology for Climate and Community
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3368/E3368M-24
Title:
Standard Specification for Ballistic-Resistant Helmets Worn by U.S. Public Safety Officers
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM E3368/E3368M-25
Title:
Standard Specification for Ballistic-Resistant Helmets Worn by U.S. Public Safety Officers
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3373-24
Title:
Standard Test Method for Scour of Hydrodynamic Separators and Settling Devices
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3377-24
Title:
Standard Guide for Environmental, Social, and Governance (ESG) Disclosure Related to Climate and Community
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3379-25
Title:
Standard Guide for Critical Airflow Visualization
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E3379-25a
Title:
Standard Guide for Critical Airflow Visualization
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3382-24
Title:
Standard Guide for Developing Representative Background Concentrations at Sediment Sites—Framework Overview, Including Conceptual Site Model Considerations
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3394-23
Title:
Standard Specification for Field Screening Devices Used for Identification of Biological Agents
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3395-23
Title:
Standard Test Method for Characterizing Performance of Field Screening Devices for the Identification of Biological Agents
Organization: ASTM International
Year: 2023
Status: Active
ASTM E3400-24
Title:
Standard Practice for Collecting Storm Based Paired Influent and Effluent Flow Weighted Composite Water Samples using Automated Samplers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3408/E3408M-25
Title:
Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Inspect
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E3408/E3408M-25a
Title:
Standard Test Methods for Evaluating Ground Response Robot Capabilities: Dexterity: Inspect
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3422/E3422M-24
Title:
Standard Specification for Protective Helmets Worn by Pedestrian Roadway Workers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3430-25
Title:
Standard Practice for On-Site Inspection of Installed Board and Wrap Type Fireproofing Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3431-25
Title:
Standard Practice for On-Site Inspection of Installed Spray-Applied Fire Resistive Material
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3432-25
Title:
Standard Practice for On-Site Inspection of Installed Intumescent Fire Resistive Material
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3447-24
Title:
Standard Guide for NAPL Mobility and Migration in Sediments—Use of Ebullition Flux Chambers
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3453/E3453M-24
Title:
Standard Specification for Ballistic-Resistant Body Armor Accessories
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3456-25
Title:
Standard Practice for On-Site Identification of Firestop Systems and Judgments
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3460-24
Title:
Standard Guide for Climate and Community Mapping
Organization: ASTM International
Year: 2024
Status: Active
ASTM E3461-25
Title:
Standard Guide for Principles of Circular Product Design
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM E3461-26
Title:
Standard Guide for Principles of Circular Product Design
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3495-25
Title:
Standard Classification for Reporting Particle Contamination and Insoluble Droplets in Water and other Pharmaceutical Fluids When Analyzed by Direct Imaging Analyzers
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3511-26
Title:
Standard Guide for Per- and Polyfluoroalkyl Substances (PFAS) Sampling of Environmental Media
Organization: ASTM International
Year: 2025
Status: Active
ASTM E3519-26
Title:
Standard Guide for Recording Serious Incident and Fatality (SIF) Events (Other Than Employee Work-Related Injury and Illness)
Organization: ASTM International
Year: 2026
Status: Active
ASTM E3529-26
Title:
Standard Guide for Identification, Prioritization, and Reduction of Risk of Occupationally Related Serious Incidents and Fatalities (SIF)
Organization: ASTM International
Year: 2026
Status: Active
ASTM F91-06(2026)
Title:
Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
Organization: ASTM International
Year: 2026
Status: Active
ASTM F571-87(2024)
Title:
Standard Practice for Installation of Exit Devices in Security Areas
Organization: ASTM International
Year: 2024
Status: Active
ASTM F588-26
Title:
Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
Organization: ASTM International
Year: 2026
Status: Active
ASTM F631-15(2025)
Title:
Standard Guide for Collecting Skimmer Performance Data in Controlled Environments
Organization: ASTM International
Year: 2025
Status: Active
ASTM F792-17(2026)
Title:
Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
Organization: ASTM International
Year: 2025
Status: Active
ASTM F803-25
Title:
Standard Specification for Eye Protectors for Selected Sports
Organization: ASTM International
Year: 2025
Status: Active
ASTM F818-16(2025)
Title:
Standard Terminology Relating to Spill Response Booms and Barriers
Organization: ASTM International
Year: 2025
Status: Active
ASTM F903-24
Title:
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1001-24
Title:
Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1045-24
Title:
Standard Performance Specification for Ice Hockey Helmets
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1060-26
Title:
Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR)
Organization: ASTM International
Year: 2026
Status: Active
ASTM F1084-08(2024)
Title:
Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1154-24
Title:
Standard Practices for Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles, Ensemble Elements, and Other Components
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1194-18(2025)
Title:
Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1198-92(2023)
Title:
Standard Guide for Shipboard Fire Detection Systems
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1209-23
Title:
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1210-23
Title:
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1231-23
Title:
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1279-19(2024)
Title:
Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1280-19(2024)
Title:
Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1301-18(2024)e1
Title:
Standard Practice for Labeling Chemical Protective Clothing
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1322-15(2024)
Title:
Standard Guide for Selection of Shipboard Incinerators
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1333-91(2024)
Title:
Standard Specification for Construction of Fire and Foam Station Cabinets
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1407-12(2025)
Title:
Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1414-19(2023)
Title:
Standard Test Method for Measurement of Cut Resistance to Chainsaw in Lower Body (Legs) Protective Clothing
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1446-20(2025)
Title:
Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1447-24
Title:
Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1449-20(2026)
Title:
Standard Guide for Industrial Laundering Care and Maintenance of Flame Resistant or Arc Rated Clothing
Organization: ASTM International
Year: 2026
Status: Active
ASTM F1461-25
Title:
Standard Practice for Chemical Protective Clothing Program
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1492-25
Title:
Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1514-19(2025)
Title:
Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1534-26
Title:
Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1550-26
Title:
Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism...
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1607-95(2024)
Title:
Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1615-19(2024)
Title:
Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1633-25
Title:
Standard Guide for Techniques in Land Search
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1670/F1670M-24
Title:
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM F1670/F1670M-24a
Title:
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM F1670/F1670M-25
Title:
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1671/F1671M-25
Title:
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM F1671/F1671M-25a
Title:
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM F1671/F1671M-26
Title:
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
Organization: ASTM International
Year: 2026
Status: Active
ASTM F1693-21(2025)
Title:
Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1731-21(2026)
Title:
Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
Organization: ASTM International
Year: 2026
Status: Active
ASTM F1739-96(2024)
Title:
Standard Guide for Performance of a Water Rescuer—Level I
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1768-97(2025)
Title:
Standard Guide for Using Whistle Signals During Rope Rescue Operations
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1776-25
Title:
Standard Specification for Eye, Face, and Head Protective Devices for Paintball Sports
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM F1776-26
Title:
Standard Specification for Eye, Face, and Head Protective Devices for Paintball Sports
Organization: ASTM International
Year: 2026
Status: Active
ASTM F1778-97(2025)
Title:
Standard Guide for Selection of Skimmers for Oil-Spill Response
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1779-24
Title:
Standard Practice for Reporting Visual Observations of Oil on Water from Aircraft
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1780-18(2024)
Title:
Standard Guide for Estimating Oil Spill Recovery System Effectiveness
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1790/F1790M-15(2025)
Title:
Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with CPP Test Equipment
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1791-00(2024)
Title:
Standard Specification for Filters Used in Air or Nitrogen Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1819-24
Title:
Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Synthetic Blood Using a Mechanical Pressure Technique
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1849-23
Title:
Standard Specification for Helmets Used in Ice Speed Skating (Long Track) and Short Track Speed Ice Skating (Not to Include Hockey)
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1870-26
Title:
Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1891-25
Title:
Standard Specification for Arc and Flame Resistant Rainwear
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1897-25
Title:
Standard Specification for Leg Protection for Chain Saw Users
Organization: ASTM International
Year: 2025
Status: Active
ASTM F1898-26
Title:
Standard Specification for Helmets for Non-Motorized Wheeled Vehicles Used by Infants and Toddlers
Organization: ASTM International
Year: 2026
Status: Active
ASTM F1937-04(2023)e1
Title:
Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding
Organization: ASTM International
Year: 2023
Status: Active
ASTM F1939-26
Title:
Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
Organization: ASTM International
Year: 2026
Status: Active
ASTM F1952-26
Title:
Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing
Organization: ASTM International
Year: 2026
Status: Active
ASTM F1959/F1959M-23
Title:
Standard Test Method for Determining the Arc Rating of Materials for Clothing
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM F1959/F1959M-23a
Title:
Standard Test Method for Determining the Arc Rating of Materials for Clothing
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM F1959/F1959M-24
Title:
Standard Test Method for Determining the Arc Rating of Materials for Clothing
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM F1959/F1959M-24a
Title:
Standard Test Method for Determining the Arc Rating of Materials for Clothing
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM F1959/F1959M-24b
Title:
Standard Test Method for Determining the Arc Rating of Materials for Clothing
Organization: ASTM International
Year: 2024
Status: Active
ASTM F1993-24
Title:
Standard Classification System of Human Land Search and Rescue Resources
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2008-00(2024)
Title:
Standard Guide for Qualitative Observations of Skimmer Performance
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2032-26
Title:
Standard Specification for Helmets Used for BMX Cycling
Organization: ASTM International
Year: 2026
Status: Active
ASTM F2039-00(2024)
Title:
Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2061-25
Title:
Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2084/F2084M-01(2024)
Title:
Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2152-25
Title:
Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2208-08(2025)
Title:
Standard Safety Specification for Residential Pool Alarms
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2230-23
Title:
Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
Organization: ASTM International
Year: 2023
Status: Active
ASTM F2327-25
Title:
Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2371-16(2024)
Title:
Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2401-24
Title:
Standard Guide for Security Checkpoint Screening of Persons with Medical Devices Using Metal Detectors
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2412-24
Title:
Standard Test Methods for Foot Protection
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2413-24
Title:
Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2417-24
Title:
Standard Specification for Fire Safety for Candles
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM F2417-26
Title:
Standard Specification for Fire Safety for Candles
Organization: ASTM International
Year: 2026
Status: Active
ASTM F2436-14(2025)
Title:
Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2439-17(2023)
Title:
Standard Specification for Headgear Used in Soccer
Organization: ASTM International
Year: 2023
Status: Active
ASTM F2441-25
Title:
Standard Practice for Labeling of Recreational Camping Tents and Bivouac Sacks
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2465/F2465M-24
Title:
Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2491-20(2025)
Title:
Standard Guide for Determining Safety Factors for Technical Rescue Systems and Equipment
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2530-13(2025)
Title:
Standard Specification for Protective Headgear with Faceguard Used in Bull Riding
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2532-19(2024)
Title:
Standard Guide for Determining Net Environmental Benefit of Dispersant Use
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2533-25
Title:
Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2681-18(2023)e1
Title:
Standard Specification for Body Protectors Used in Equine Racing
Organization: ASTM International
Year: 2023
Status: Active
ASTM F2682-07(2024)
Title:
Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2683-11(2024)
Title:
Standard Guide for Selection of Booms for Oil-Spill Response
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2685-25
Title:
Standard Guide for Training of a Land Search Team Leader (STL)
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2700-26
Title:
Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Continuous Heating
Organization: ASTM International
Year: 2026
Status: Active
ASTM F2703-26
Title:
Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame-Resistant Materials for Clothing with Burn Injury Prediction
Organization: ASTM International
Year: 2026
Status: Active
ASTM F2704-25
Title:
Standard Specification for Air-Fed Protective Ensembles
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2709-19(2025)
Title:
Standard Test Method for Determining a Measured Nameplate Recovery Rate of Stationary Oil Skimmer Systems
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2727-09(2025)
Title:
Standard Guide for Manufacturers for Labeling Headgear Products
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2731-24
Title:
Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2752-25
Title:
Standard Guide for Training for Basic Rope Rescuer Endorsement
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2794-25
Title:
Standard Guide for Training of a Mounted Search Team
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2814-23
Title:
Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
Organization: ASTM International
Year: 2023
Status: Active
ASTM F2821-15(2025)
Title:
Standard Test Methods for Basket-Type Rescue Litters
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2823-25
Title:
Standard Guide for In-Situ Burning of Oil Spills in Marshes
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2877/F2877M-13(2024)
Title:
Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2878-19(2024)
Title:
Standard Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2879-22(2026)
Title:
Standard Specification for Eye Protective Devices for Airsoft Sports
Organization: ASTM International
Year: 2026
Status: Active
ASTM F2890-17(2024)
Title:
Standard Guide for Hazard Awareness for Search and Rescue Personnel
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2892-24
Title:
Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2931-19a(2025)
Title:
Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
Organization: ASTM International
Year: 2025
Status: Active
ASTM F2954-25
Title:
Standard Guide for Training for Intermediate Rope Rescuer Endorsement
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2955-25
Title:
Standard Guide for Training for Advanced Rope Rescuer Endorsement
Organization: ASTM International
Year: 2024
Status: Active
ASTM F2961-24
Title:
Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM F2961-25
Title:
Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM F2961-26
Title:
Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
Organization: ASTM International
Year: 2026
Status: Active
ASTM F2995-24
Title:
Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3013-13(2026)
Title:
Standard Test Method for Density of Topsoil and Blended Soils In-place by the Core Displacement Method
Organization: ASTM International
Year: 2026
Status: Active
ASTM F3024-24
Title:
Standard Guide for Training of a Land Search and Rescue (SAR) Strike Team/Task Force Leader
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3027-24
Title:
Standard Guide for Training of Personnel Operating in Mountainous Terrain (Mountain Endorsement)
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3028-24
Title:
Standard Guide for Training of Search and Rescue Personnel Operating in the Alpine Environment (Alpine Endorsement)
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3032-25
Title:
Standard Specification for Clothing for Protection Against Radiological Contamination
Organization: ASTM International
Year: 2025
Status: Inactive
ASTM F3032-26
Title:
Standard Specification for Clothing for Protection Against Radiological Contamination
Organization: ASTM International
Year: 2026
Status: Active
ASTM F3045-26
Title:
Standard Test Method for Evaluation of the Type and Viscoelastic Stability of Water-in-Oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Water
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3077-25
Title:
Standard Specification for Eye Protectors for Women's Lacrosse
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3098-16(2025)
Title:
Standard Guide for Training of Non-Wilderness Land Search Team Member
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3164-24
Title:
Standard Specification for Eye Protectors for Racket Sports (that is, Racquetball, Squash, Tennis, Pickleball)
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3175-16(2025)
Title:
Standard Guide for Training and Equipping Search and Rescue Personnel Operating on Mountain Bikes (Mountain Bike SAR Endorsement)
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3193-25
Title:
Standard Guide for Training of a Land Search and Rescue Team Leader
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3195-26
Title:
Standard Guide for Estimating the Volume of Oil Consumed in an In-Situ Burn
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3214-26
Title:
Standard Practice for Characterization of Fire Properties of Seating, Upholstery, and Padding Materials for Vehicles Associated with Amusement Rides and Devices
Organization: ASTM International
Year: 2026
Status: Active
ASTM F3221-16(2025)
Title:
Standard Guide for Training for Snowmobile Operator's Endorsement
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3222-16(2025)
Title:
Standard Terminology Relating to F32 Land Search and Rescue Standards and Guides
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3251-26
Title:
Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Baffled Flask
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3272-25
Title:
Standard Guide for Selection, Care, and Use of Arc Protective Blankets
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3284-25
Title:
Standard Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3324-19(2023)
Title:
Standard Test Method for Measurement of Cut Resistance to Chainsaw in Leg Protective Devices
Organization: ASTM International
Year: 2023
Status: Active
ASTM F3337-23
Title:
Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM F3337-25
Title:
Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3349-18(2024)
Title:
Standard Guide for Use of Herding Agents in Conjunction with In-Situ Burning
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3350-18(2024)
Title:
Standard Guide for Collecting Skimmer Performance Data in Ice Conditions
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3387-23
Title:
Standard Practice for Respiratory Protection
Organization: ASTM International
Year: 2023
Status: Active
ASTM F3398-21(2026)
Title:
Standard Specification for Face and Ear Protective Devices for Air Soft Sports
Organization: ASTM International
Year: 2026
Status: Active
ASTM F3445-24
Title:
Standard Specification for Performance Requirements when Evaluating Slip Resistance of Footwear using ASTM F2913 Whole Shoe Tester
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3502-24
Title:
Standard Specification for Barrier Face Coverings
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM F3502-25
Title:
Standard Specification for Barrier Face Coverings
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3537-25
Title:
Standard Guide for Respirator Fit Testing Methods
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3552-25
Title:
Standard Test Method for Bench-Scale Evaluation of Flame-Resistant Clothing Materials for Protection Against Fire Simulations (Cylinder Method)
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3627-23
Title:
Standard Guide for Premises Design Considering Snow and Ice Management for the Reduction of Pedestrian Slips
Organization: ASTM International
Year: 2023
Status: Inactive
ASTM F3627-24
Title:
Standard Guide for Premises Design Considering Snow and Ice Management for the Reduction of Pedestrian Slips
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3628-24
Title:
Standard Test Method for Measuring the Cooling Energy Provided by Wicking Liquid Moisture and Evaporating It from Clothing Materials Using a Sweating Hot Plate
Organization: ASTM International
Year: 2024
Status: Active
ASTM ISO/ASTM52938-1-25
Title:
Additive manufacturing of metals — Environment, health and safety — Part 1: Safety requirements for PBF-LB machines
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3681-24
Title:
Standard Consumer Safety Specification for Beach Umbrellas and Anchor Devices
Organization: ASTM International
Year: 2024
Status: Inactive
ASTM F3681-25
Title:
Standard Consumer Safety Specification for Beach Umbrellas and Anchor Devices
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3688-25
Title:
Standard Guide for Evaluating Potential Ergonomic Risks From Exoskeleton Use
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3698-24
Title:
Standard Specification for Computer-vision Drowning Detection Systems for Residential Swimming Pools
Organization: ASTM International
Year: 2024
Status: Active
ASTM F3732-25
Title:
Standard Performance Specification for Conductive Clothing for Industry Applications
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3778-25
Title:
Standard Specification for Poly(Vinyl Chloride) (PVC) Storm Sewer Basins for Gravity Flow
Organization: ASTM International
Year: 2025
Status: Active
ASTM F3809-26
Title:
Standard Test Method for Assessment of Fire Behavior of Mattresses in Detention and Correctional Facilities by Mass Loss
Organization: ASTM International
Year: 2025
Status: Active
ASTM G51-23
Title:
Standard Test Method for Measuring pH of Soil for Use in Corrosion Evaluations
Organization: ASTM International
Year: 2023
Status: Active
ASTM G72/G72M-24
Title:
Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
Organization: ASTM International
Year: 2023
Status: Active
ASTM G86-17(2025)
Title:
Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
Organization: ASTM International
Year: 2025
Status: Active
ASTM G92-20(2025)
Title:
Standard Practice for Characterization of Atmospheric Test Sites
Organization: ASTM International
Year: 2025
Status: Active
ASTM G151-26
Title:
Standard Practice for Exposing Materials in Accelerated Test Devices that Use Laboratory Light Sources
Organization: ASTM International
Year: 2026
Status: Active
ASTM G155-25
Title:
Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
Organization: ASTM International
Year: 2025
Status: Active
ASTM G156-24
Title:
Standard Practice for Selecting and Characterizing Weathering Reference Materials
Organization: ASTM International
Year: 2024
Status: Active
ASTM G187-23
Title:
Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
Organization: ASTM International
Year: 2023
Status: Active
ASTM G201-23
Title:
Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
Organization: ASTM International
Year: 2023
Status: Active
ASTM G229-26
Title:
Standard Practice for Estimating the Time of Wetness Potential at an Outdoor Weathering Site using a Cotton Wick Sensor
Organization: ASTM International
Year: 2025
Status: Active
Search Within Environmental, Health and Safety