loading
ASABE S261 - Design and Installation of Nonreinforced Concrete Irrigation Pipe Systems
February 1, 1989 - ASABE

Purpose and Scope This Standard is intended as a guide to engineers in the design and installation of low or intermediate pressure nonreinforced concrete irrigation pipelines and for the preparation of detailed specifications for a particular installation. It is restricted to pipelines with...

ASTM C505M-05a - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
December 1, 2005 - ASTM International

This specification covers reinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients. The acceptability of the pipe, joint design, and gaskets shall be determined by the results of...

ASTM C505M-05 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
October 15, 2005 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 This specification is the SI counterpart of Specification C 505. Note...

ASTM C505-05a - Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
December 1, 2005 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 A complete metric companion to Specification C 505 has been...

ASTM C505M-04 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
April 1, 2004 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 This specification is the SI counterpart of Specification C 505. Note...

ASTM C505-05 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints
October 15, 2005 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 A complete metric companion to Specification C 505 has been...

ASTM C505M-03 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
July 10, 2003 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 This specification is the SI counterpart of Specification C 505. Note...

ASTM C505-03 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints
July 10, 2003 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in . 1.2 A complete metric companion to Specification C 505 has been developed-C 505M;...

ASTM C505M-99a - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric]
August 10, 1999 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 This specification is the SI counterpart of Specification C505....

ASTM C505-99a - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints
August 10, 1999 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 A complete metric companion to Specification C505 has been...

ASTM C505M - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
July 15, 2019 - ASTM

This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. This specification is the SI counterpart of Specification C505. NOTE 1-This...

ASTM C505M-19 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
July 15, 2019 - ASTM International

This specification covers reinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients. The acceptability of the pipe, joint design, and gaskets shall be determined by the results of...

ASTM C505 - Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
July 15, 2019 - ASTM

This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. A complete metric companion to Specification C505 has been developed-C505M;...

ASTM C505-19 - Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
July 15, 2019 - ASTM International

This specification covers reinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients. The acceptability of the pipe, joint design, and gaskets shall be determined by the results of...

ASTM C505-15 - Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
October 1, 2015 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. (A) Thinner walls are not prohibited on pipe units not over 4 ft in...

ASTM C505M-15 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
October 1, 2015 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. (A) Thinner walls are not prohibited on pipe units not over 1.22 m...

ASTM C505-11 - Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
September 1, 2011 - ASTM International

1.1 This specification covers nonreinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients, as shown in Table 1. 1.2 A complete metric companion to Specification C505 has been developed...

ASTM C505M-11 - Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
September 1, 2011 - ASTM International

This specification covers reinforced concrete pipe with rubber gasket joints to be used for the conveyance of irrigation water with working pressures, including hydraulic transients. The acceptability of the pipe, joint design, and gaskets shall be determined by the results of...

Advertisement