BS EN 61834-6
Title:
Recording - Helical-Scan Digital Video Cassette Recording System Using 6,35 mm Magnetic Tape for Consumer Use (525-60, 625-50, 1125-60 and 1250-50 Systems) - Part 6: SDL Format
Organization: BSI
Year: 2001
Status: Active
BS 6059
Title:
Specification for essential data to be supplied with X-ray tubes and X-ray tube assemblies for medical use
Organization: BSI
Year: 1981
Status: Inactive
BS EN 60317-3
Title:
Specifications for Particular Types of Winding Wires Part 3: Polyester Enamelled Round Copper Wire, Class 155
Organization: BSI
Year: 1996
Status: Inactive
BS 6319-7
Title:
Testing of Resin Compositions for Use in Construction Part 7: Method for Measurement of Tensile Strength
Organization: BSI
Year: 1985
Status: Active
BS 6319-11
Title:
Testing of resin and polymer/cement compositions for use in construction - Part 11: Methods for determination of creep in compression and in tension
Organization: BSI
Year: 1993
Status: Active
BS 3388
Title:
Forks, shovels and spades - Requirements and test methods
Organization: BSI
Year: 2004
Status: Active
BUMED 4651.1
Title:
(MEDCOM-54) CONTINUING EDUCATION (CE), PROFESSIONAL UPDATE TRAINING (PUT), AND ALTERNATIVE INSTRUCTIONAL SYSTEMS (AIS) FOR MEDICAL DEPARTMENT PERSONNEL
Organization: NAVY
Year: 1988
Status: Inactive
BS PD 6518
Title:
Prefabricated Temporary Road Marking Materials for Use at Road Works
Organization: BSI
Year: 1987
Status: Active
BS 7424
Title:
Determination of the Bending Stiffness of Paper and Board by Static Methods
Organization: BSI
Year: 1991
Status: Inactive
BS EN ISO 4026
Title:
Hexagon socket set screws with flat point
Organization: BSI
Year: 2003
Status: Active
BS 3999-8
Title:
Methods of Measuring the performance of household electrical appliances - Part 8: Coffee makers
Organization: BSI
Year: 1984
Status: Inactive
BS EN 60512-2-2
Title:
Connectors for electronic equipment Tests and measurements Part 2-2: Electrical continuity and contact resistance tests Test 2b: Contact resistance Specified test current method
Organization: BSI
Year: 2003
Status: Active
BS EN 28092-1
Title:
Road Vehicles - Flat, Quick-Connect Terminations Part 1: Tabs for Single Pole Connections
Organization: BSI
Year: 1992
Status: Inactive
BS 2000-367
Title:
Petroleum products - Determination and application of precision data in relation to methods of test
Organization: BSI
Year: 2006
Status: Inactive
BS EN 1208
Title:
Chemicals used for treatment of water intended for human consumption Sodium calcium polyphosphate
Organization: BSI
Year: 2005
Status: Active
BS AU 152
Title:
Specification for Rear marking plates for vehicles
Organization: BSI
Year: 1970
Status: Active
BS 5276-1
Title:
Pressure vessel details (dimensions) - Part 1: Specification for davits for branch covers of steel vessels
Organization: BSI
Year: 1984
Status: Active
BS ISO/IEC 8613-5
Title:
Information Technology - Open Document Architecture (ODA) and Interchange Format: Open Document Interchange Format
Organization: BSI
Year: 1995
Status: Inactive
BS 6435
Title:
Specification for Unfilled enclosures for the dry termination of HV cables for transformers and reactors
Organization: BSI
Year: 1984
Status: Inactive
BS 1728-14
Title:
Method for the determination of Nickel - In aluminium & aluminium alloys (gravimetric method)
Organization: BSI
Status: Active
BS 7825-3.2
Title:
Calibration of Rubber and Plastics Test Equipment Part 3: Calibration Schedules Section 3.2: Electrical Properties
Organization: BSI
Year: 1997
Status: Inactive
BS EN 15204
Title:
Water quality - Guidance standard on the enumeration of phytoplankton using inverted microscopy (Utermohl technique)
Organization: BSI
Year: 2006
Status: Active
BS EN 1571
Title:
Bar Coding - Data Identifiers
Organization: BSI
Year: 1997
Status: Inactive
BS 9491-F0182
Title:
Integrated Electronic Circuits Electronic Components of Assessed Quality Detailed Specification in Accordance with BS 9400:1970
Organization: BSI
Year: 1980
Status: Inactive
BS EN ISO 4638
Title:
Polymeric Materials, Cellular Flexible - Determination of Air Flow Permeability
Organization: BSI
Year: 1995
Status: Active
BS EN 844-7
Title:
Round and Sawn Timber - Terminology Part 7: Terms Relating to Anatomical Structure of Timber
Organization: BSI
Year: 1997
Status: Inactive
BS EN 1174-1
Title:
Sterilization of Medical Devices - Estimation of the Population of Micro-Organisms on Product Part 1: Requirements
Organization: BSI
Year: 1996
Status: Inactive
BS EN 22234
Title:
Complete, filled transport packages. Methods of test for stacking using static load
Organization: BSI
Year: 1986
Status: Inactive
BS 7951
Title:
Specification for Electricity Meters - Alternating-Current Single-Phase Static Watt-Hour Telemeters of Accuracy Class 1 or 2
Organization: BSI
Year: 2000
Status: Active
BS EN 14873-1
Title:
Furniture removal activities Storage of furniture and personal effects for private individuals Part 1: Specification for the storage facility and related storage provision
Organization: BSI
Year: 2006
Status: Active
BS EN 209
Title:
Steel Drums - Removable Head (Open Head) Drums with a Minimum Total Capacity of 210 l
Organization: BSI
Year: 2000
Status: Inactive
BS 6912-22.6
Title:
Safety of Earth-Moving Machinery Part 22: Operator Enclosure Environment Section 22.6: Determination of the Effect of Solar Heating on the Operator Enclosure
Organization: BSI
Year: 1996
Status: Inactive
BS EN 462-2
Title:
Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value
Organization: BSI
Year: 1994
Status: Inactive
BS ISO 16151
Title:
Corrosion of metals and alloys Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
Organization: BSI
Year: 2006
Status: Inactive
BS 3087-11
Title:
Pliers and Nippers - Part 11: Specification for Dimensions and Test Values of Slip Joint Pliers
Organization: BSI
Year: 1991
Status: Inactive
BS EN 12396-3
Title:
Non-Fatty Foods - Determination of Dithiocarbamate and Thiuram Disulfide Residues - Part 3: UV Spectrometric Xanthogenate Method
Organization: BSI
Year: 2000
Status: Active
BS EN 3769
Title:
Electrolytic Polishing of Corrosion Resisting Steels and Heat Resisting Alloys
Organization: BSI
Year: 1997
Status: Active
BS EN 14576
Title:
Geosynthetics Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking
Organization: BSI
Year: 2005
Status: Active
BS 3330
Title:
Specification for Polythene Splints and Appliances for External Orthopaedic Use
Organization: BSI
Status: Inactive
BS EN ISO 9054
Title:
Cellular Plastics, Rigid - Test Methods for Self-Skinned High-Density Materials
Organization: BSI
Year: 1999
Status: Active
BS EN 3373-013
Title:
Terminal lugs and in-line splices for crimping on electric conductors Part 013: In-line splices, insulated and moisture resistant, for crimping on copper conductors, temperature up to 260 °C Prod...
Organization: BSI
Year: 2006
Status: Active
BS EN 13274-3
Title:
Respiratory Protective Devices - Methods of Test - Part 3: Determination of Breathing Resistance
Organization: BSI
Year: 2001
Status: Active
BS ISO 14951-13
Title:
Space Systems - Fluid Characteristics - Part 13: Breathing Air
Organization: BSI
Year: 1999
Status: Inactive
BS EN 61300-2-40
Title:
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-40: Tests - Screen Testing of Attenuation of Single-Mode Tuned Angles Optical Connectors
Organization: BSI
Year: 2001
Status: Active
BS AU 206-1
Title:
Diagnostic Systems for Road Vehicles - Part 1: Glossary
Organization: BSI
Year: 1986
Status: Inactive
BS EN 60094-7
Title:
Magnetic Tape Sound Recording and Reproducing Systems Part 7: Specification for Cassettes for Commercial Tape Records and Domestic Use
Organization: BSI
Year: 1994
Status: Active
BS 7527-3.5
Title:
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 3.5: Ground Vehicle Installations
Organization: BSI
Year: 1991
Status: Inactive
BS ISO 1268-9
Title:
Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of GMT/STC
Organization: BSI
Year: 2003
Status: Active
BUMED 6322.6D
Title:
(393: WRG: HLP) THE UNIFORMED SERVICES HEALTH BENEFITS PROGRAM OUTSIDE THE UNITED STATES, PUERTO RICO, CANADA, AND MEXICO
Organization: NAVY
Year: 1974
Status: Inactive
BS 1449-1.14
Title:
Steel plate, sheet and strip - Part 1: Carbon and carbon-manganese plate, sheet and strip - Section 1.14 Specification for hot rolled narrow strip supplied in a range of conditions for heat treatme...
Organization: BSI
Year: 1991
Status: Active
BS 462
Title:
Specification for wire rope grips
Organization: BSI
Year: 1983
Status: Inactive
BS 5086-7
Title:
Analysis of Butter - Part 7: Method for Determination of pH of Butter Serum
Organization: BSI
Year: 1991
Status: Active
BS 6431-21
Title:
Ceramic floor and wall tiles - Part 21: Method for determination of moisture expansion using boiling water - Unglazed tiles
Organization: BSI
Year: 1984
Status: Inactive
BS 5198
Title:
Specification for Lingoes for Jacquard Weaving
Organization: BSI
Year: 1975
Status: Inactive
BN-97-4-4
Title:
Radiant Time Series Cooling Load Calculation Procedure
Organization: ASHRAE
Year: 1997
Status: Inactive
BS 1296-4
Title:
Specification for Single Point Cutting Tools - Part 4: High Speed Tool Bits
Organization: BSI
Year: 1978
Status: Active
BS EN 50237
Title:
Gloves and Mitts with Mechanical Protection for Electrical Purposes
Organization: BSI
Year: 2000
Status: Inactive
BS 1728-10
Title:
Method for The determination of manganese in aluminium and aluminium alloys (Absorptiometric method) - Methods for the analysis of aluminiumand aluminium alloys
Organization: BSI
Status: Active
BS 4137
Title:
Guide to the Selection of Electrical Equipment for Use in Division 2 Areas
Organization: BSI
Status: Inactive
BS 4215-5
Title:
Resistance Spot Welding Electrodes, Electrode Holders and Ancillary Equipment Part 5: Specification for Electrode Back-Ups and Clamps
Organization: BSI
Year: 1987
Status: Inactive
BS DD ENV 14138
Title:
Lead and Lead Alloys - Analysis by Flame Atomic Absorption Spectrometry (FAAS) or Inductively Coupled Plasma Emissions Spectrometry (ICP-ES), After Separation by Co-Precipitation
Organization: BSI
Year: 2001
Status: Active
BS 3459
Title:
Specification for Stands for drawing boards
Organization: BSI
Year: 1985
Status: Active
BS 6955-3
Title:
Calibration of Vibration and Shock Pick-Ups Part 3: Method for Secondary Vibration Calibration
Organization: BSI
Year: 1994
Status: Inactive
BS 4533-102.55
Title:
Luminaires Part 102: Particular Requirements Section 102.55: Luminaires for Hospitals and Health Care Buildings
Organization: BSI
Year: 1986
Status: Inactive
BS EN 725-7
Title:
Advanced Technical Ceramics - Methods of Test for Ceramic Powders Part 7: Determination of the Absolute Density
Organization: BSI
Year: 1996
Status: Inactive
BS ISO 15859-4
Title:
Space systems - Fluid characteristics, sampling and test methods - Part 4: Helium
Organization: BSI
Year: 2004
Status: Active
BS EN 1683
Title:
EDI - Message - Delivery Schedule Message (DELFOR)
Organization: BSI
Year: 1996
Status: Active
BUMED 1553.3
Title:
M(BUMED-53) CURRICULUM CHANGE PROCEDURE
Organization: NAVY
Year: 1997
Status: Active
BS EN ISO 5620-1
Title:
Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks Part 1: General Requirements
Organization: BSI
Year: 1997
Status: Active
BS EN 14719
Title:
Pulp, paper and board - Determination of the Diisopropyl-naphthalene (DIPN) content by solvent extraction
Organization: BSI
Year: 2005
Status: Active
BS ISO 11042-1
Title:
Gas turbines - Exhaust gas emission - Part 1: Measurement and evaluation
Organization: BSI
Year: 1997
Status: Active
BS IEC 60050-351
Title:
International Electrotechnical Vocabulary - Part 351: Automatic Control
Organization: BSI
Year: 1999
Status: Inactive
BS DD ENV 13149-1
Title:
Public Transport - Road Vehicle Scheduling and Control Systems - Part 1: WORLDFIP Definition and Application Rules for Onboard Data Transmission
Organization: BSI
Year: 2000
Status: Inactive
BS 4651-2
Title:
Ammonia Solution - Part 2: Method for Determination of Ammonia Content
Organization: BSI
Year: 1987
Status: Active
BS DD ENV 50091-3
Title:
Uninterruptible Power Systems (UPS) - Part 3: Performance Requirements and Test Methods
Organization: BSI
Year: 1999
Status: Inactive
BS 8000-5
Title:
Workmanship on Building Sites - Part 5: Code of Practice for Carpentry, Joinery and General Fixings
Organization: BSI
Year: 1990
Status: Inactive
BS 5401
Title:
Guide to Information Content and Presentation of Operators' Manuals Provided for Tractors and Machinery for Agriculture and Forestry
Organization: BSI
Year: 1990
Status: Active
BS 7156-1
Title:
Respiratory Protective Devices: Threads for Facepieces Part 1: Specification for Standard Thread Connection
Organization: BSI
Year: 1990
Status: Inactive
BS 4285-2.3
Title:
Microbiological Examination for Dairy Purposes Part 2: Methods of General Application for Enumeration of Microorganisms Sec 2.3: Enumeration of Microorganisms by Surface Plate Technique for Colony ...
Organization: BSI
Year: 1984
Status: Inactive
BS 4072-2
Title:
Wood Preservation by Means of Copper/ Chromium/Arsenic Compositions Part 2: Method for Timber Treatment
Organization: BSI
Year: 1987
Status: Inactive
BS 5188
Title:
Non-Refillable Metallic Containers up to 1.4 Litres Capacity and 85 MM Diameter for Liquefied or Compressed Non-Flammable Gases
Organization: BSI
Year: 1990
Status: Inactive
BS EN ISO 6603-2
Title:
Plastics - Determination of Puncture Impact Behaviour or Rigid Plastics - Part 2: Instrumented Puncture Testing
Organization: BSI
Year: 2000
Status: Active
BS 3762-3.24
Title:
Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.24: Methods for Determination of Low Molecular Mass Alcohols Content
Organization: BSI
Year: 1988
Status: Active
BS ISO 20826
Title:
Automotive LPG components - Containers
Organization: BSI
Year: 2006
Status: Active
BS 1262
Title:
Metal packaging - Round lever-lid metal containers for surface coatings - Specification
Organization: BSI
Year: 2002
Status: Active
BS 6332-6
Title:
Thermal performance of domestic gas appliances - Part 6: Specification for thermal performance of combined appliances: fanned-circulation ducted-air heater/circulator
Organization: BSI
Year: 1990
Status: Active
BS 4035
Title:
Linear Measuring Instruments for Use on Building and Civil Engineering Constructional Works. Steel Measuring Tapes, Steel Bands and Retractable Steel Pocket Rules
Organization: BSI
Status: Inactive
BS IEC 60092-506
Title:
Electrical installations in ships Part 506: Special features Ships carrying specific dangerous goods and materials hazardous only in bulk
Organization: BSI
Year: 2004
Status: Active
BS EN 22858
Title:
End-Suction Centrifugal Pumps (Rating 16 Bar) - Designation, Nominal Duty Point and Dimensions
Organization: BSI
Year: 1993
Status: Inactive
BS CP 2004
Title:
Code of practice for Foundations
Organization: BSI
Year: 1972
Status: Inactive
BS 5070-1
Title:
Engineering diagram drawing practice - Part 1: Recommendations for general principles
Organization: BSI
Year: 1988
Status: Active
BS ISO/IEC TR 15947
Title:
Information technology - Security techniques - IT intrusion detection framework
Organization: BSI
Year: 2002
Status: Inactive
BS EN 1413
Title:
Textiles - Determination of pH of Aqueous Extract
Organization: BSI
Year: 1998
Status: Inactive
BS EN 13010
Title:
Packaging Unit packaging Dimensions and requirements for pegboard display
Organization: BSI
Year: 2003
Status: Active
BS 4687
Title:
Extended Pitch Precision Roller Chains and Chainwheels
Organization: BSI
Year: 1984
Status: Inactive
BS EN 2266-005
Title:
Cables, electrical, for general purpose Operating temperatures between -55 degrees C and 200 degrees C Part 005: UV laser printable Product standard
Organization: BSI
Year: 2006
Status: Active
BS MA 36
Title:
Specification for ships' deck machinery - topping winches
Organization: BSI
Year: 1974
Status: Inactive
BS 1016-102
Title:
Methods for Analysis and Testing of Coal and Coke - Part 102: Determination of Total Moisture of Coke
Organization: BSI
Year: 2000
Status: Inactive
BS PD IEC TR 61911
Title:
Live Working - Installation of Distribution Line Conductors - Stringing Equipment and Accessory Items
Organization: BSI
Year: 1999
Status: Active
BS 497-1
Title:
Specification for Manhole covers, road gully gratings and frames for drainage purposes Part 1. Cast iron and cast steel
Organization: BSI
Year: 1976
Status: Inactive
BS EN ISO 140-1
Title:
Acoustics - Measurement of Sound Insulation in Buildings and of Building Elements - Part 1: Requirements for Laboratory Test Facilities with Suppressed Flanking Transmission
Organization: BSI
Year: 1998
Status: Inactive
BS AU 201-1
Title:
Relays and Flashers Part 1: Mounting and Positioning Dimensions of Male Tabs and Socket Apertures for Relays and Flashers for Road Vehicles
Organization: BSI
Year: 1985
Status: Inactive
BS 6398
Title:
Specification for Bitumen Damp-Proof Courses for Masonry
Organization: BSI
Year: 1983
Status: Active
BS 5445-1
Title:
Components of Automatic Fire Detection Systems Part 1: Introduction
Organization: BSI
Year: 1977
Status: Inactive
BS 5600-5.1
Title:
Powder Metallurgical Materials and Products Part 5: Material Specifications for Sintered Metal Products, Excluding Hardmetals Section 5.1: Materials, for Bearings, Impregnated with Liquid Lubricant
Organization: BSI
Year: 1988
Status: Inactive
BS 5550-2.2.3
Title:
Cinematography - Part 2: 16mm Film - Section 2.2: Image Areas - Subsection 2.2.3: Positions and Dimensions of Picture Image Area and Photographic Sound Record on 16 mm Motion-Picture Release Prints
Organization: BSI
Year: 1980
Status: Active
BS EN 29455-14
Title:
Soft Soldering Fluxes - Test Methods Part 14: Assessment of Tackiness of Flux Residues
Organization: BSI
Year: 1993
Status: Inactive
BS EN 60510-2-6
Title:
Methods of Measurement for Radio Equipment Used in Satellite Earth Stations Part 2: Measurements for Sub-Systems Section 2.6: Frequency Demodulators
Organization: BSI
Year: 1996
Status: Active
BS ISO 25
Title:
Cinematography - Camera Usage of 16 mm Motion-Picture Film - Specifications
Organization: BSI
Year: 1995
Status: Active
BS EN ISO 105-B04
Title:
Textiles - Tests for Colour Fastness Part B04: Colour Fastness to Artificial Weathering: Xenon Arc Fading Lamp Test
Organization: BSI
Year: 1997
Status: Active
BS 4803-1
Title:
Radiation Safety of Laser Products and Systems Part 1: General
Organization: BSI
Year: 1983
Status: Inactive
BS 7982
Title:
Guidance on the Environmental Impact of Large-Scale Fires Involving Plastics Materials
Organization: BSI
Year: 2001
Status: Active
BS EN 60300-3-14
Title:
Dependability management - Part 3-14: Application guide Maintenance and maintenance support
Organization: BSI
Year: 2004
Status: Active
BS ISO/IEC 11588-8
Title:
Information Technology - Message Handling Systems (MHS) Management Part 8: Message Transfer Agent Management
Organization: BSI
Year: 1997
Status: Inactive
BS PD ES 59005
Title:
Considerations for the Evaluation of Human Exposure to Electromagnetic Fields (EMFs) from Mobile Telecommunication Equipment (MTE) in the Frequency Range 30 MHz - 6 GHz
Organization: BSI
Year: 1999
Status: Active
BS 615
Title:
Specification for Kohlrausch Flasks
Organization: BSI
Status: Active
BS A 323
Title:
Aerospace - Bihexagonal Drives - Wrenching Configuration - Metric Series
Organization: BSI
Year: 1998
Status: Active
BS ISO 8296
Title:
Plastics Film and sheeting Determination of wetting tension
Organization: BSI
Year: 2003
Status: Active
BS 1494-1
Title:
Specification for Fixing accessories for building purposes - Part 1: Fixings for Sheet, Roof and Wall Coverings
Organization: BSI
Status: Inactive
BS EN 3790
Title:
Pipe Coupling 8 Degrees 30' - Protective Caps with Internal Threads
Organization: BSI
Year: 2001
Status: Active
BS EN ISO 24013
Title:
Optics and photonics - Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation
Organization: BSI
Year: 2006
Status: Active
BS ISO 8137
Title:
Hydraulic Fluid Power - Single Rod Cylinders, 250 Bar (25 MPa) Series - Port Dimensions
Organization: BSI
Year: 1997
Status: Active
BS 2044
Title:
Determination of Resistivity of Conductive and Antistatic Plastics and Rubbers (Laboratory Methods)
Organization: BSI
Year: 1984
Status: Inactive
BS EN ISO 10882-2
Title:
Health and Safety in Welding and Allied Processes - Sampling of Airborne Particles and Gases in the Operator's Breathing Zone - Part 2: Sampling of Gases
Organization: BSI
Year: 2000
Status: Active
BS EN 10246-3
Title:
Non-Destructive Testing of Steel Tubes - Part 3: Automatic Eddy Current Testing of Seamless and Welded (Except Submerged Arc-Welded) Steel Tubes for the Detection of Imperfections
Organization: BSI
Year: 2000
Status: Inactive
BS EN 1705
Title:
Plastics Piping Systems - Thermoplastics Valves - Test Method for the Integrity of a Valve After an External Blow
Organization: BSI
Year: 1997
Status: Active
BS 14
Title:
Structural Steel for the Pressure Parts of Marine Boilers
Organization: BSI
Status: Inactive
BS 684 P1 S1.1
Title:
Corr. 1 Methods of Analysis of Fats and Fatty Oils Part 1: Physical Methods Section 1.1: Determination of Litre Weight in Air
Organization: BSI
Year: 1995
Status: Inactive
BS DD IEC/PAS 61162-102
Title:
Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 102: Single talker and multiple listeners Extra requirements to IEC 61162-1 for the Voyage Data Recorder
Organization: BSI
Year: 2004
Status: Inactive
BS EN 61259
Title:
Gas-Insulated Metal- Enclosed Switchgear for Rated Voltages 72,5 kV and Above - Requirements for Switching of Bus- Charging Currents by Disconnectors
Organization: BSI
Year: 1995
Status: Inactive
BS 6407-2
Title:
Cage Pallets for Retail Use - Part 2: Guide to the Safe Handling and Use of Collapsible Cage Pallets Rated at 300 kg
Organization: BSI
Year: 1984
Status: Active
BS EN 61071-2
Title:
Power Electronic Capacitors Part 2: Requirements for Disconnecting Test on Fuses, Destruction Test, Self Healing Test and Endurance Test
Organization: BSI
Year: 1996
Status: Inactive
BS 2A 293
Title:
Procurement of self-locking nuts with non-metallic locking elements - Metric series - Specification
Organization: BSI
Year: 2005
Status: Active
BS 5502-75
Title:
Buildings and Structures for Agriculture - Part 75: code for Practice for the Design and Construction of Forage Stores
Organization: BSI
Year: 1993
Status: Active
BS 7142-3
Title:
Methods for Analysis of Milk-Based Products - Part 3: Determination of Fat Content of Milk-Based Edible Ices and Ice Mixes by the Weibull-Berntrop Gravimetric Method
Organization: BSI
Year: 1989
Status: Inactive
BS 3510
Title:
Basic Symbol to Denote the Actual or Potential Presence of Ionizing Radiation
Organization: BSI
Status: Inactive
BS 5600-2.3
Title:
Powder Metallurgical Materials and Products Part 2: Methods of Sampling and Testing Metallic Powders Section 2.3: Determination of Tap Density
Organization: BSI
Year: 1988
Status: Inactive
BS 9114
Title:
Rules for the Preparation of Detail Specifications for Fixed Wirewound Resistors (Type 2) of Assessed Quality
Organization: BSI
Year: 1970
Status: Inactive
BS EN 10296-1
Title:
Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
Organization: BSI
Year: 2003
Status: Active
BS 4921
Title:
Specification for Sherardized Coatings on Iron and Steel
Organization: BSI
Year: 1988
Status: Inactive
BS EN 13927
Title:
Non-destructive testing - Visual testing - Equipment
Organization: BSI
Year: 2003
Status: Active
BS ISO 406
Title:
Technical drawings - Tolerancing of linear and angular dimensions
Organization: BSI
Year: 2000
Status: Inactive
BS EN 14617-9
Title:
Agglomerated stone Test methods Part 9: Determination of impact resistance
Organization: BSI
Year: 2005
Status: Active
BS 2782-2 METH: 250C
Title:
Methods of Testing Plastics Part 2: Electrical Properties Method 250C: Antistatic Behaviour of Film. Field Window Method
Organization: BSI
Year: 1976
Status: Inactive
BS 8433
Title:
Microwavable personal warmers - Specification
Organization: BSI
Year: 2004
Status: Active
BS EN 119000
Title:
Harmonized system of quality assessment for electronic components - Generic specification - Dry and mercury wetted reed contact units
Organization: BSI
Year: 1997
Status: Inactive
BUMED 5450.113A
Title:
(BUMED-31110 NAVAL REGIONAL MEDICAL CENTER, OAKLAND, CALIFORNIA; MISSION AND AND FUNCTIONS OF
Organization: NAVY
Year: 1980
Status: Inactive
BS 5173-101.1
Title:
Rubber and Plastics Hoses and Hose Assemblies Part 101: Determination of Dimensions Section 101.1: Measurement of Dimensions (Excluding Length)
Organization: BSI
Year: 1985
Status: Inactive
BS EN ISO 15614-11
Title:
Specification and Qualification of Welding Procedures for Metallic Materials - Welding Procedure Test - Part 11: Electron and Laser Beam Welding
Organization: BSI
Year: 2002
Status: Active
BS ISO/IEC ISP 11185-15
Title:
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 15: FVT2113 - Field Definition Management Con...
Organization: BSI
Year: 1995
Status: Inactive
BS EN 45510-7-2
Title:
Guide for Procurement of Power Station Equipment - Part 7-2: Pipework and Valves - Boiler and High Pressure Valves
Organization: BSI
Year: 2000
Status: Active
BS 5163
Title:
Specification for Predominantly Key-Operated Cast Iron Gate Valves for Waterworks Purposes
Organization: BSI
Year: 1986
Status: Inactive
BS S 164
Title:
1% Chromium-molybdenum steel billets, bars, forgings and parts. (1 150 to 1 300 MPa: Limiting ruling section 16 mm) (Suitable for welding)
Organization: BSI
Year: 2002
Status: Active
BS 3424
Title:
Methods of Test for Coated Fabrics
Organization: BSI
Year: 1973
Status: Inactive
BS EN 12663
Title:
Railway Applications - Structural Requirements of Railway Vehicle Bodies
Organization: BSI
Year: 2000
Status: Inactive
BS ISO 12078
Title:
Anhydrous milk fat - Determination of sterol composition by gas liquid chromatography (Reference method)
Organization: BSI
Year: 2006
Status: Active
BS 7568-8
Title:
Press Tools Part 8: Round Matrixes
Organization: BSI
Year: 1992
Status: Inactive
BS EN ISO 12894
Title:
Ergonomics of the thermal environment Medical supervision of individuals exposed to extreme hot or cold environments
Organization: BSI
Year: 2001
Status: Active
BS EN 2350
Title:
Circuit Breakers. Technical Specification
Organization: BSI
Year: 1991
Status: Active
BS 9420-F0492 TO F0504
Title:
Electronic Components of Assessed Quality Detail Specification in Accordance with BS 9400
Organization: BSI
Year: 1980
Status: Inactive
BS CECC 31200
Title:
Sectional Specification: Fixed Capacitors with Metallized Electrodes and Polypropylene Dielectric
Organization: BSI
Year: 1981
Status: Inactive
BS 5957
Title:
Recommendations for Modules for the Coordinating Dimensions of Catering Equipment Using Containers to BS 4874
Organization: BSI
Year: 1980
Status: Inactive
BS 3727-15
Title:
METHODS FOR THE ANALYSIS OF NICKEL FOR USE IN ELECTRONIC TUBES ANDVALVES - PART 15: DETERMINATION OF ZINC (PHOTOMETRIC METHOD)
Organization: BSI
Status: Inactive
BS 6625-1
Title:
Spectacle Frames - Part 1: Specification for General Requirements
Organization: BSI
Year: 1985
Status: Inactive
BS EN 13938-4
Title:
Explosives for civil uses Propellants and rocket propellants Part 4: Determination of burning rate under ambient conditions
Organization: BSI
Year: 2003
Status: Active
BS 6829-4.6
Title:
Analysis of Surface Active Agents (Raw Materials) Part 4: Ethylene Oxide Adducts Section 4.6: Method for Determination of Hydroxyl Value
Organization: BSI
Year: 1988
Status: Active
BS EN 1763-1
Title:
Rubber and Plastics Tubing, Hoses and Assemblies for Use with Commercial Propane, Commercial Butane and Their Mixtures in the Vapour Phase - Part 1: Requirements for Rubber and Plastics Tubing and ...
Organization: BSI
Year: 2001
Status: Inactive
BS EN 3869
Title:
Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy
Organization: BSI
Year: 2004
Status: Active
BS 4168-2
Title:
Hexagon Socket Screws and Wrench Keys: Metric Series Part 2: Specification for Hexagon Socket Set Screws with Flat Point
Organization: BSI
Year: 1994
Status: Inactive
BS 3517
Title:
Thermal Shock Tests on Laboratory Glassware
Organization: BSI
Year: 1991
Status: Active
BS G 242
Title:
Specification for Data Bus Interconnecting Systems
Organization: BSI
Year: 1989
Status: Active
BS 1831 SUPP 1
Title:
Recommended Common Names for Pesticides Supplement 1:
Organization: BSI
Year: 1970
Status: Inactive
BS 3243
Title:
Specification for Hand-operated chain blocks
Organization: BSI
Year: 1990
Status: Inactive
BS EN 62155
Title:
Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
Organization: BSI
Year: 2003
Status: Active
BS EN ISO 9400
Title:
Nickel-Based Alloys - Determination of Resistance to Intergranular Corrosion
Organization: BSI
Year: 1996
Status: Active
BS 6686-2.2
Title:
Methods for Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements Section 2.2: Forced Draught Convection Heaters
Organization: BSI
Year: 1990
Status: Inactive
BS EN ISO/IEC 7487-1
Title:
Information Technology - Data Interchange on 130 mm (5,25 in) Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7958 ftprad, 1,9 tpmm (48 tpi), on Both Sides - ISO type 202 ...
Organization: BSI
Year: 1995
Status: Active
BS 684-0
Title:
Methods of Analysis of Fats and Fatty Oils Part 0: General Introduction
Organization: BSI
Year: 1990
Status: Inactive
BS EN ISO 15253
Title:
Ophthalmic optics and instruments - Optical devices for low-vision aids
Organization: BSI
Year: 2000
Status: Active
BS IEC 61577-1
Title:
Radiation protection instrumentation Radon and radon decay product measuring instruments Part 1: General principles
Organization: BSI
Year: 2006
Status: Active
BS PAS 30
Title:
Outdoor Recreational Multi-Sports Equipment - Specification
Organization: BSI
Year: 1998
Status: Inactive
BS 5501-8
Title:
Electrical apparatus for potentially explosive atmospheres - Part 8: Encapsulation "m"
Organization: BSI
Year: 1988
Status: Inactive
BS PD IEC TR 60721-4-5
Title:
Classification of Environmental Conditions - Part 4-5: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Gr...
Organization: BSI
Year: 2002
Status: Active
BS 4L 44
Title:
Specification for Forging Stock, Bars, Extruded Sections and Forgings of Aluminium-2 1/4 Percent Magnesium Alloy
Organization: BSI
Year: 1973
Status: Inactive
BS EN 13761
Title:
Office furniture Visitors chairs
Organization: BSI
Year: 2002
Status: Inactive
BB-F-671A CANC
Title:
FREON GAS, COMPRESSED (CHLOROFLUORD HYDROCARBONS)
Organization: NAVY
Status: Inactive
BS 3800-3
Title:
General Tests for Machine Tools - Part 3: Method of Testing Performance of Machines Operating Under Loaded Conditions in Respect of Thermal Distortion
Organization: BSI
Year: 1990
Status: Active
BS PAS 29
Title:
Disposable Pulp Products for Use in Healthcare
Organization: BSI
Year: 1999
Status: Active
BS EN ISO 4320
Title:
Non-Ionic Surface Active Agents - Determination of Cloud Point Index Volumetric Method
Organization: BSI
Year: 1998
Status: Active
BS ISO 17900
Title:
Agricultural Trailers - Balanced and Semi-Mounted Trailers - Determination of Payload, Vertical Static Load and Axle Load
Organization: BSI
Year: 2002
Status: Active
BS ISO 10754
Title:
Information and documentation - Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
Organization: BSI
Year: 1997
Status: Active
BS EN 60317-45
Title:
Particular Types of Winding Wires - Part 45: Polyester Enamelled Round Copper Wire, Class 130
Organization: BSI
Year: 1998
Status: Inactive
BS 3762-3.2
Title:
Analysis of Formulated Detergents Part 3: Quantitative Test Methods Section 3.2: Method for Determination of Hydrolizable and Non- Hydrolizable Anionic- Active Matter Content After Hydrolysis Under...
Organization: BSI
Year: 1983
Status: Active
BS 6160-2
Title:
Measurement for Radio Equipment Used in the Mobile Services Part 2: Transmitters Employing A3 or F3 Emissions
Organization: BSI
Year: 1981
Status: Inactive
BS EN 61300-2-32
Title:
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 2.32: Tests - Water Vapour Permeation
Organization: BSI
Year: 1997
Status: Active
B20.1 INT NO. 7
Title:
INTERPRETATIONS NO. 7 TO ASME B20.1-1990 SAFETY STANDARD FOR CONVEYORS AND RELATED EQUIPMENT
Organization: ASME
Year: 1990
Status: Inactive
BS 1000[676]
Title:
Universal Decimal Classification - English full edition - FID publication no. 483 - UDC 676 Paper industry
Organization: BSI
Year: 1984
Status: Inactive
BS 5173-102.10
Title:
Rubber and Plastics Hoses and Hose Assemblies Part 102: Hydraulic Pressure Tests Section 102.10: Hydrostatic Tests for Oil Suction and Discharge Hose
Organization: BSI
Year: 1990
Status: Active
BS EN 10291
Title:
Metallic Materials - Uniaxial Creep Testing in Tension - Methods of Test
Organization: BSI
Year: 2000
Status: Inactive
BS 4675-1
Title:
Mechanical Vibration in Rotating Machinery Part 1: Basis for Specifying Evaluation Standards for Rotating Machines with Operating Speeds from 10 to 200 Revolutions per Second
Organization: BSI
Year: 1976
Status: Inactive
BS 6717-3
Title:
Precast concrete paving blocks Part 3. Code of practice for laying
Organization: BSI
Year: 1990
Status: Inactive
BS ISO 15715
Title:
Binders for paints and varnishes Determination of turbidity
Organization: BSI
Year: 2003
Status: Inactive
BUPERS 12531.1 CH-1
Title:
(OCPM-12) PAY UNDER THE GENERAL SCHEDULE OCPM CHG NOT 1 - 07/07/88
Organization: NAVY
Year: 1988
Status: Inactive
BS 4167-6
Title:
Electrically-Heated Catering Equipment Part 6: Bulk Liquid Heaters
Organization: BSI
Status: Inactive
BS ISO 31-5
Title:
Quantities and units Part 5: Electricity and magnetism
Organization: BSI
Year: 2004
Status: Inactive
BUPERS 7510.1B
Title:
(PERS-65E) LOCAL FISCAL OVERSIGHT AND REVIEWS OF NONAPPROPRIATED FUND INSTRUMENTALITIES (NAFIS)
Organization: NAVY
Year: 2003
Status: Active
BS EN 61249-2-2
Title:
Materials for printed boards and other interconnecting structures Part 2-2: Reinforced base materials, clad and unclad Phenolic cellulose paper reinforced laminate sheets, high electrical grade, ...
Organization: BSI
Year: 2006
Status: Active
BS 6605
Title:
Specification for Cross Recesses for Screws
Organization: BSI
Year: 1990
Status: Inactive
BS 3939-1
Title:
Graphical Symbols for Electrical Power, Telecommunications and Electronics Diagrams Part 1: General Information, General Index
Organization: BSI
Year: 1986
Status: Inactive
BS 2L 116
Title:
Specification for Tube of 99 % aluminium - (Cold drawn: seamless: not tested hydraulically) (Not exceeding 12 mm wall thickness)
Organization: BSI
Year: 1985
Status: Inactive
B97.3-M1982
Title:
Tolerances Et Ajustements Normalises Pour Pieces D'Assemblage, Dimensions En Unites SI
Organization: CSA
Year: 1982
Status: Inactive
BS 6331-2
Title:
Mounting Dimensions of Single Rod Double- Acting Hydraulic Cylinders Part 2: Specification for 160 Bar Compact Series
Organization: BSI
Year: 1983
Status: Inactive
BS EN 13720
Title:
Transportable gas cylinders - Filling conditions for acetylene battery vehicles
Organization: BSI
Year: 2002
Status: Active
BS 142-1.5.2
Title:
Electrical Protection Relays Part 1: Information and Requirements for All Protection Relays Section 1.5: Vibration, Shock, Bump and Seismic Testing Subsection 1.5.2: Specification for Shock and Bum...
Organization: BSI
Year: 1989
Status: Inactive
BS CP 335-1
Title:
Selection and Installation of Miscellaneous Town Gas Appliances Part 1: Domestic Laundering and Miscellaneous Appliances
Organization: BSI
Year: 1973
Status: Inactive
BS EN 61305-2
Title:
Household High-Fidelity Audio Equipment and Systems - Methods of Measuring and Specifying the Performance Part 2: FM Radio Tuners
Organization: BSI
Year: 1998
Status: Active
BS 2977
Title:
Domestic Lighting Appliances for Use with Butane/Propane Gases - Part 1: Appliances for Use With Butane Gas
Organization: BSI
Status: Active
BS 5885-1
Title:
Automatic Gas Burners - Part 1: Specification for Burners with Input Rating 60kW and Above
Organization: BSI
Year: 1988
Status: Active
B93.91M
Title:
Hydraulic Fluid Power - Cylinders - Rod End Spherical Eyes - Mounting Dimensions
Organization: NFPA
Year: 1987
Status: Inactive
BS 5760-8
Title:
Reliability of Systems, Equipment and Components Part 8: Guide to Assessment of Reliability of Systems Containing Software
Organization: BSI
Year: 1998
Status: Active
BS EN 2591-703
Title:
Elements of Electrical and Optical Connection - Test Methods - Part 703: Electrical Elements - Common Mode Rejection of Couplers
Organization: BSI
Year: 2001
Status: Active
BS 4618-4.1
Title:
Recommendations for the Presentation of Plastics Design Data - Part 4: Environmental and Chemical Effects - Section 4.1: Chemical Resistance to Liquids
Organization: BSI
Year: 1972
Status: Inactive
BS 6092-2
Title:
Sampling and Test for Sodium and Potassium Silicates for Industrial Use Part 2: Determination of Total Solids Content
Organization: BSI
Year: 1981
Status: Inactive
BS 3G 198-1
Title:
Sleeves for Aircraft Electric Cables and Equipment Wires Part 1: Specification for Elastomeric Sleeves for Binding and Identification
Organization: BSI
Year: 1989
Status: Inactive
BS 7667-2
Title:
Assessors for Sensory Analysis Part 2: Guide to the Selection, Training and Monitoring of Experts
Organization: BSI
Year: 1994
Status: Inactive
BUPERS 5450.9
Title:
(NMPC-024/ PERS-106) ENLISTED PERSONNEL MANAGEMENT CENTER (EPMAC), NEW ORLEANS, LOUISIANA; MISSION AND FUNCTIONS OF NMPC
Organization: NAVY
Year: 1983
Status: Inactive
BS 3456-2.26
Title:
Specification for Safety of Household Electrical Appliances - Part 2: Particular Requirements - Section 2.26: Thermal-Storage Electric Room Heaters
Organization: BSI
Year: 1973
Status: Inactive
BS EN 1556
Title:
Bar Coding - Terminology
Organization: BSI
Year: 1998
Status: Active
BS 5411-10
Title:
Methods of Test for Metallic and Related Coatings Part 10: Review of Methods Available for Testing Adhesion of Electro-Deposited and Chemically Deposited Metallic Coatings on Metallic Substrates
Organization: BSI
Year: 1980
Status: Inactive
BS 7870-4.12
Title:
LV and MV Polymeric Insulated Cables for Use by Distribution and Generation Utilities - Part 4: Specification for Distribution Cables with Extruded Insulation for Rated Voltages of 11 kV and 33 kV ...
Organization: BSI
Year: 2001
Status: Inactive
BS EN 2014
Title:
Bearings - Airframe Rolling Rigid Single Row Ball Bearings in Corrosion Resisting Steel Diameter Series 0 and 2. Dimensions and Loads
Organization: BSI
Year: 1989
Status: Active
BS 7153
Title:
Guide for Computer System Configuration Diagram (Symbols and Conventions)
Organization: BSI
Year: 1989
Status: Inactive
BS EN 10259
Title:
Cold-Rolled Stainless Steel Wide Strip and Plate/Sheet - Tolerances on Dimensions and Shape
Organization: BSI
Year: 1997
Status: Inactive
BUMED 5100.1
Title:
(MEDCOM-04F) ACTIVITY SAFETY AND OCCUPATIONAL HEALTH PROGRAM NAVMEDCOM
Organization: NAVY
Year: 1986
Status: Inactive
BS 2068
Title:
Specification for acetic anhydride
Organization: BSI
Year: 1970
Status: Active
BS 1344-1
Title:
Methods of Testing - Vitreous Enamel Finishes - Part 1: Determination of Resistance to Thermal Shock of Coatings on Articles Other Than Cooking Utensils and Fabricated Sheet Steel Components
Organization: BSI
Year: 1994
Status: Inactive
BS EN 433
Title:
Resilient Floor Coverings - Determination of Residual Indentation After Static Loading
Organization: BSI
Year: 1994
Status: Inactive
BS ISO 5768
Title:
Cinematography - Image Produced by Camera Aperture Type W on 16 mm Motion-Picture Film - Position and Dimensions
Organization: BSI
Year: 1999
Status: Active
BS 3633-2
Title:
Specification for Cheese-Pressing Moulds Part 2: Circular Moulds
Organization: BSI
Status: Inactive
BS 4357
Title:
Specification for Precast Terrazzo Units
Organization: BSI
Status: Inactive
BS EN 814-3
Title:
Air Conditioners and Heat Pumps with Electrically Driven Compressors - Cooling Mode Part 3. Requirements
Organization: BSI
Year: 1997
Status: Inactive
BS 1397
Title:
Industrial Safety Belts, Harnesses and Safety Lanyards
Organization: BSI
Year: 1979
Status: Inactive
BS 7868
Title:
Guide for Calibration Tapes for Broadcast VTRs
Organization: BSI
Year: 1996
Status: Active
BS EN 3444
Title:
Bolt, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated - Classification: 1 250 MPa (at ambient temperature)/650 °C
Organization: BSI
Year: 2006
Status: Active
BS EN 130902
Title:
Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fixed Polystyrene Film Dielectric Metal foil d.c.Capacitors - Assessment Level EZ
Organization: BSI
Year: 1998
Status: Inactive
BS 6840-6
Title:
Sound System Equipment Part 6: Methods for Specifying and Measuring the Characteristics of Auxiliary Passive Elements
Organization: BSI
Year: 1987
Status: Active
BS ISO 3033-3
Title:
Oil of spearmint - Part 3: Indian type (Mentha spicata L.), redistilled oil
Organization: BSI
Year: 2005
Status: Active
BS 3S 62
Title:
12 Per Cent Chromium Corrosion-Resisting Steel (45/55 Tonf/Sq In: Limiting Ruling Section 6 In)
Organization: BSI
Status: Inactive
BS EN 14021
Title:
Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods
Organization: BSI
Year: 2004
Status: Active
BS AU 142
Title:
Methods of Test for Brake Linings Materials
Organization: BSI
Status: Inactive
BS EN 1850-2
Title:
Flexible Sheets for Waterproofing - Determination of Visible Defects - Part 2: Plastic and Rubber Sheets for Roof Waterproofing
Organization: BSI
Year: 2001
Status: Active
BS EN 28839
Title:
Mechanical Properties of Fasteners - Bolts, Screws, Studs and Nuts Made of Non-Ferrous Metals
Organization: BSI
Year: 1992
Status: Active
BS AU 117
Title:
Dimensions of Chassis for 30 ft Public Service Vehicle (Double Deck)
Organization: BSI
Status: Inactive
BS 6911-3
Title:
Testing Earth-Moving Machinery Part 3: Measurement of Tool Forces of Hydraulic Excavators
Organization: BSI
Year: 1990
Status: Inactive
BS 1743-5
Title:
Methods for Analysis of Dried Milk and Dried Milk Products - Part 5: Determination of Bulk Density
Organization: BSI
Year: 1992
Status: Inactive
BS EN 50240
Title:
Electromagnetic compatibility (EMC) - Product standard for resistance welding equipment
Organization: BSI
Year: 2004
Status: Inactive
BS 7862
Title:
Gears - Surface Temper Etch Inspection After Grinding
Organization: BSI
Year: 1996
Status: Inactive
BS EN 13199-3
Title:
Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS)
Organization: BSI
Year: 2000
Status: Active
BS 3531-5.3
Title:
Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.3: Spec. for the Dimensions of Screws Having Hexagonal Drive Connection, Spherical Under-Surfaces and Asymmetrical ...
Organization: BSI
Year: 1991
Status: Active
BS 5532-1
Title:
Statistical Terminology Part 1: Glossary of Terms Relating to Probability and General Terms Relating to Statistics
Organization: BSI
Year: 1978
Status: Inactive
BS ISO 1781
Title:
Cinematography - Projector Usage of 8 mm Type S Motion-Picture Film for Direct Front Projection
Organization: BSI
Year: 1995
Status: Active
BUMED 5400.4
Title:
(BUMED-02D) UTILIZATION OF RESERVE PERSONNEL AT BUMED; POLICY AND GUIDELINES FOR
Organization: NAVY
Year: 1979
Status: Active
BS QC 750103
Title:
Specification for Harmonized system of quality assessment for electronic components - Semiconductor discrete devices - Blank detail specification - Case-rated bipolar transistors for low-frequency ...
Organization: BSI
Year: 1990
Status: Inactive
BS EN 2713-006
Title:
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 200 °C - Part 006: Screened (braided) and jacketed, CO2 laser printable -...
Organization: BSI
Year: 2006
Status: Active
B140.2.3-M1981
Title:
Replacement Burners and Replacement Combustion Heads for Residential Oil Burners
Organization: CSA
Year: 1981
Status: Inactive
BS 4807
Title:
Centralized Lubrication Systems
Organization: BSI
Year: 1992
Status: Inactive
BS 7241
Title:
Specification for IEC 822 VSB. Parallel sub-system bus of the IEC 821 VME bus
Organization: BSI
Year: 1990
Status: Active
BS ISO 9735-7
Title:
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4, Syntax release number: 1) - Part 7: Security rules for b...
Organization: BSI
Year: 2002
Status: Active
BS ISO 6926
Title:
Acoustics - Requirements for the Performance and Calibration of Reference Sound Sources for the Determination of Sound Power Levels
Organization: BSI
Year: 2000
Status: Inactive
BS M 89
Title:
Aircraft Ground Support Equipment - Stability Requirements for Loading and Servicing Equipment
Organization: BSI
Year: 1996
Status: Active
BS PD CEN/TR 15123
Title:
Design, preparation and application of internal polymer plastering systems
Organization: BSI
Year: 2005
Status: Inactive
BS ISO/TR 14696
Title:
Reaction to Fire Tests - Determination of Fire Parameters of Materials, Products and Assemblies Using an Intermediate Scale Heat Release Calorimeter (ICAL)
Organization: BSI
Year: 2000
Status: Inactive
BS ISO 13752
Title:
Air Quality - Assessment of Uncertainty of a Measurement Method under Field Conditions Using a Second Method as Reference
Organization: BSI
Year: 1998
Status: Active
BS 7702
Title:
Guide to Volumetric Metering of Viscous Hydrocarbons
Organization: BSI
Year: 1993
Status: Active
BS EN 14851
Title:
Aerosol containers Aerosol foam flammability test
Organization: BSI
Year: 2006
Status: Inactive
BS 1567
Title:
Specification for Wood door frames and linings
Organization: BSI
Status: Inactive
BUMED 6410 07/23/01
Title:
(BUMED-23) CHANGES TO THE MANUAL OF THE MEDICAL DEPARTMENT (MANMED), CHAPTER 15, ARTICLE 15-65 AND CHAPTER 16, ARTICLE 16-23
Organization: NAVY
Year: 2001
Status: Inactive
B93.107M
Title:
Hydraulic Fluid Power - Single Rod Cylinders, 250 Bar (25 MPa) Series - Port Dimensions (Metric Only)
Organization: NFPA
Year: 1987
Status: Inactive
BS EN 3155-025
Title:
Aerospace series Electrical contacts used in elements of connection Part 025: Contacts, electrical, triaxial, size 8, female, type D, crimp, class S Product standard
Organization: BSI
Year: 2006
Status: Active
BS 4814
Title:
Expansion Vessels Using an Internal Diaphragm, for Sealed Hot Water Heating Systems
Organization: BSI
Year: 1990
Status: Inactive
BS ISO/IEC ISP 11187-4
Title:
Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 4: AVT23. S-Mode Paged Application Profile
Organization: BSI
Year: 1998
Status: Inactive
BS EN ISO 8744
Title:
Grooved pins - Full-length taper grooved
Organization: BSI
Year: 1998
Status: Active
BS 4727-3 G02
Title:
Glossary of Electrotechnical, Power, Telecommunication, Electronics, Lighting and Colour Terms Part 3: Terms Particular to Telecommunications and Electronics Group 02: Telephony
Organization: BSI
Year: 1993
Status: Active
BS 6200-3.29.1
Title:
Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.29 Determination of tantalum - Subsection 3.29.1 Steel: spectrophotometric method
Organization: BSI
Year: 1986
Status: Active
BS EN 13725
Title:
Air quality - Determination of odour concentration by dynamic olfactometry
Organization: BSI
Year: 2003
Status: Active
BS CP 143-15
Title:
Code of Practice for Sheet roof and wall coverings - Part 15: Aluminium - Metric units
Organization: BSI
Year: 1973
Status: Active
BS A 227
Title:
Specification for Steel Pan Head Bolts (Short Thread: Class 3A)
Organization: BSI
Status: Active
BS 7769-1.2
Title:
Electric Cables. Calculation of the Current Rating Part 1: Current Rating Equations (100 Percent Load Factor) and Calculation of Losses Section 1.2: Sheath Eddy Current Loss Factors for Two Circuit...
Organization: BSI
Year: 1994
Status: Active
BS 2972
Title:
Methods of Test for Inorganic Thermal Insulating Materials
Organization: BSI
Year: 1989
Status: Inactive
BS EN ISO 1873-1
Title:
Plastics - Polypropylene (PP) Moulding and Extrusion Materials - Part 1: Designation System and Basis for Specifications
Organization: BSI
Year: 1995
Status: Inactive
BS 1485
Title:
Specification for Zinc-Coated Hexagonal Steel Wire Netting
Organization: BSI
Year: 1983
Status: Inactive
BS ISO/IEC 7185
Title:
Information Technology - Programming Languages - Pascal
Organization: BSI
Year: 1991
Status: Inactive
BS EN 2355
Title:
Fork-Ends, Threaded, Control Cable in Corrosion Resisting Steel. Dimensions and Loads
Organization: BSI
Year: 1989
Status: Active
BS EN 14662-4
Title:
Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
Organization: BSI
Year: 2005
Status: Active
BS EN 1282-1
Title:
Anaesthetic and Respiratory Equipment - Tracheostomy Tubes Part 1: Tubes for Use in Adults
Organization: BSI
Year: 1997
Status: Inactive
BS 7878-6
Title:
Materials Used in Communication Cables Part 6: Halogen Free Flame Retardant Insulation Compounds
Organization: BSI
Year: 1997
Status: Inactive
BS 4993-7
Title:
Methods of Test for Aluminium Fluoride for Industrial Use Part 7: Determination of Sodium Content
Organization: BSI
Year: 1980
Status: Inactive
BS 6640-1
Title:
Guide to arrangements for DTE to DTE physical connection Part 1. General arrangements for DTE to DTE physical connection using V.24 and X.24 interchange circuits
Organization: BSI
Year: 1987
Status: Inactive
BS EN ISO 12236
Title:
Geosynthetics - Static puncture test (CBR test)
Organization: BSI
Year: 2006
Status: Active
BS 7709-3
Title:
Analysis of Extract Solutions of Glass Part 3: Method for Determination of Calcium Oxide and Magnesium Oxide by Flame Atomic Absorption Spectrometry
Organization: BSI
Year: 1993
Status: Active
BS 9761
Title:
Sectional Specification for Capability Approval of Manufacturers of Multilayer Rigid Printed Wiring Boards of Assessed Quality with Plated Through Holes
Organization: BSI
Year: 1988
Status: Inactive
BS 903-A10
Title:
Methods of testing vulcanized rubber - Part A10: Determination of flex cracking (De Mattia)
Organization: BSI
Year: 1984
Status: Inactive
BS EN 283
Title:
Swap Bodies - Testing
Organization: BSI
Year: 1991
Status: Active
BS EN 14822-2
Title:
Health informatics - General purpose information components - Part 2: Non-clinical
Organization: BSI
Year: 2005
Status: Active
BS EN 60601-1-4
Title:
Medical Electrical Equipment - Part 1-4: General Requirements for Safety - Collateral Standard: Programmable Electrical Medical Systems
Organization: BSI
Year: 1997
Status: Inactive
BS DD CEN/TS 1555-7
Title:
Plastics piping systems for the supply of gaseous fuels Polyethylene (PE) Part 7: Guidance for the assessment of conformity
Organization: BSI
Year: 2004
Status: Inactive
BS EN 12792
Title:
Ventilation for buildings - Symbols, terminology and graphical symbols
Organization: BSI
Year: 2003
Status: Active
BS A 317
Title:
Aerospace - Nuts, Hexagonal, Plain, Normal Height, Normal Across Flats, with MJ Threads, Classifications: 600MPa(at Amb Temp)/120 Deg C,600MPa(at Amb Temp)/235 Deg C,900MPa(at Amb Temp)/425 Deg C,1...
Organization: BSI
Year: 1997
Status: Inactive
BS 6068-5.9
Title:
Water Quality Part 5: Biological Methods Section 5.9: Method for Assessing the Inhibition of Nitrification of Activated Sludge Micro-Organisms by Chemicals and Waste Waters
Organization: BSI
Year: 1990
Status: Inactive
BS 5173-103.8
Title:
Methods of Test for Rubber and Plastics Hoses and Hose Assemblies Part 103: Physical Tests Section 103.8: Determination of Resistance to Steam
Organization: BSI
Year: 1992
Status: Inactive
BS EN 14822-3
Title:
Health informatics - General purpose information components - Part 3: Clinical
Organization: BSI
Year: 2005
Status: Active
BS ISO/IEC 16023
Title:
Information technology - International symbology specification - Maxicode
Organization: BSI
Year: 2000
Status: Active
BS EN 10202
Title:
Cold reduced tinmill products Electrolytic tinplate and electrolytic chromium/ chromium oxide coated steel
Organization: BSI
Year: 2001
Status: Active
BS 6767-1
Title:
Transportable Accommodation Units - Part 1: Recommendations for Design and Construction of the Basic Unit
Organization: BSI
Year: 1999
Status: Active
BS 7715
Title:
Specification for Prevailing Torque Type Bolts, Screws and Studs with Non-Metallic Prevailing Torque Elements Incorporated into the Thread
Organization: BSI
Year: 1994
Status: Active
BUMED 2030.1B
Title:
(MEDCOM-09B) COMNAVMEDCOM TELECOPIER COMMUNICATION SERVICE NAVMEDCOM
Organization: NAVY
Year: 1989
Status: Inactive
BS 6805-4
Title:
Statistical Methods for Determining and Verifing Stated Noise Emission Values of Machinery and Equipment Part 4: Methods for Determining and Verifying Stated Values for Batches of Machines
Organization: BSI
Year: 1987
Status: Active
BS EN 28747
Title:
Grooved Pins with Countersunk Head
Organization: BSI
Year: 1989
Status: Inactive
BS EN 14530
Title:
Workplace atmospheres - Determination of diesel particulate matter - General requirements
Organization: BSI
Year: 2004
Status: Active
BS 6930
Title:
List of Equivalent Terms for Respiratory Protective Devices
Organization: BSI
Year: 1988
Status: Inactive
BS 3698
Title:
Specification for Calcium plumbate priming paints
Organization: BSI
Status: Active
BS EN 2498
Title:
Rod Ends, Adjustable Self-Aligning Plain Bearing, with Self- Lubricating Liner and Threaded Shank. Dimensions and Loads
Organization: BSI
Year: 1990
Status: Active
BS EN 61334-4-32
Title:
Distribution Automation Using Distribution Line Carrier System Part 4: Data Communication Protocols Section 32: Data Link Layer - Logical Link Control (LLC)
Organization: BSI
Year: 1997
Status: Active
BS 6907-4
Title:
Electrical Installations for Open-Cast Mines and Quarries - Part 4: Recommendations for Winning, Stacking and Processing Machinery, Pumps and Low Signal Level and Communications Systems
Organization: BSI
Year: 1988
Status: Active
BS ISO 603-2
Title:
Bonded Abrasive Products - Dimensions - Part 2: Grinding Wheels for Centreless External Cylindrical Grinding
Organization: BSI
Year: 1999
Status: Active
BS CP 1007
Title:
Maintained Lighting for Cinemas
Organization: BSI
Status: Inactive
BS EN 24006
Title:
Measurement of fluid flow in closed conduits - Vocabulary and symbols
Organization: BSI
Year: 1991
Status: Active
BS 6043-2.20.1
Title:
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 2: Electrode coke - Section 2.20: Carboxy reactivity of calcined coke - Subsection 2.20.1: Determination...
Organization: BSI
Year: 2001
Status: Active
BS ISO/IEC 10089
Title:
Information Technology - 130 mm Rewritable Optical Disk Cartridge for Information Interchange
Organization: BSI
Year: 1991
Status: Active
BS ISO/IEC 15946-3
Title:
Information technology - Security techniques - Cryptographic techniques based on elliptic curves - Part 3: Key establishment
Organization: BSI
Year: 2003
Status: Inactive
BS 7813
Title:
Guide for Statistical Control of Dynamic Liquid Hydrocarbon Volumetric Metering Systems
Organization: BSI
Year: 1995
Status: Active
BS EN ISP 12068-1
Title:
Information Technology - International Standardized Profile FDI 4 - Directory Data Definitions - Use of the Directory for OSI TP Part 1: FDI 41 - Basic Naming and Addressing
Organization: BSI
Year: 1997
Status: Inactive
BS ISO/IEC 10536-1
Title:
Identification Cards - Contactless Integrated Circuit(s) Cards - Closed-Coupled Cards - Part: 1 Physical Characteristics
Organization: BSI
Year: 2000
Status: Active
BS DD CEN/TS 14588
Title:
Solid biofuels Terminology, definitions and descriptions
Organization: BSI
Year: 2004
Status: Inactive
BS EN 14333-3
Title:
Non fatty foods Determination of benzimidazole fungicides carbendazim, thiabendazole and benomyl (as carbendazim) Part 3: HPLC method with liquid/liquid-partition clean up
Organization: BSI
Year: 2004
Status: Active
BS 3762-3.22
Title:
Analysis of Formulated Detergents - Part 3: Quantitative Test Methods - Section 3.22: Method for Determination of Inorganic Sulphate Content
Organization: BSI
Year: 1986
Status: Active
BS CECC 30500
Title:
Harmonized system of quality assessment for electronic components. Sectional specification: fixed metallized polycarbonate film dielectric capacitors for direct current
Organization: BSI
Year: 1989
Status: Inactive
BS ISO 8122
Title:
Textile machinery - Knitting machines - Number of needles for circular knitting machines of large nominal diameter
Organization: BSI
Year: 2003
Status: Active
BS EN 60603-5
Title:
Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 5: Edge-Socket Connectors and Two-Part Connectors for Double-Sided Printed Boards with 2,54 mm (0,1 in) Spacing
Organization: BSI
Year: 1998
Status: Active
BS EN 13030
Title:
Ventilation for Buildings - Terminals - Performance Testing of Louvres Subjected to Simulated Rain
Organization: BSI
Year: 2001
Status: Active
BS ISO 3534-2
Title:
Statistics - Vocabulary and symbols - Part 2: Applied statistics
Organization: BSI
Year: 2006
Status: Active
BS DD ENV 12299
Title:
Railway Applications - Ride Comfort for Passengers - Measurement and Evaluation
Organization: BSI
Year: 1999
Status: Inactive
BS 9524 N0002
Title:
Detail specification for multi-contact rectangular electrical connectors with moulded bodies for d.c. and low frequency applications. Unsealed with end guides or jackscrew couplings and non-removab...
Organization: BSI
Year: 1981
Status: Inactive
BS 3696-1
Title:
Master Gears: Spur and Helical Gears (Metric Module)
Organization: BSI
Year: 1977
Status: Inactive
BS 9331 N039-046
Title:
Detail Specification for Medium Current Rectifier Diodes (3A 300 v, 600 v, 900 v, 1200 V) Hermetically Sealed. Full Assessment Level
Organization: BSI
Year: 1974
Status: Inactive
BS 4266
Title:
Specification for textile machinery and accessories - paper patterns for dobbies - dimensions
Organization: BSI
Year: 1977
Status: Inactive
BS 3900-G5
Title:
Methods of Test for Paints Part G5: Determination of Resistance to Liquids. General Methods
Organization: BSI
Year: 1993
Status: Inactive
BS EN ISO 15703
Title:
Leather - Tests for Colour Fastness - Colour Fastness to Mild Washing
Organization: BSI
Year: 1999
Status: Active
BS 9492
Title:
Rules for the Preparation of Detail Specifications for Capacitively Coupled Digital Integrated Circuits of Assessed Quality. Full Assessment Level
Organization: BSI
Year: 1978
Status: Inactive
BS EN 10165
Title:
Cold Rolled Electrical Alloyed Steel Sheet and Strip Delivered in the Semi-Processed State
Organization: BSI
Year: 1996
Status: Inactive
BS EN 23995
Title:
Metallic Powders - Determination of Green Strength by Transverse Rupture of Rectangular Compacts
Organization: BSI
Year: 1993
Status: Active
BS PD 8888
Title:
Technical Product Documentation (TPD) - An Interim Report
Organization: BSI
Year: 2001
Status: Inactive
BS 874-3.1
Title:
Methods for Determining thermal insulating properties - Part 3: Tests for thermal transmittance and conductance - Section 3.1 Guarded hot-box method
Organization: BSI
Year: 1987
Status: Inactive
BUMED 1720.1
Title:
(BUMED-09B1) BUREAU OF MEDICINE AND SURGERY HEADQUARTERS SPONSOR PROGRAM
Organization: NAVY
Year: 1981
Status: Inactive
BS EN 13763-25
Title:
Explosives for civil uses Detonators and relays Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories
Organization: BSI
Year: 2004
Status: Active
BS 4427-4
Title:
Methods of Test for Sodium Tripolyphosphate (Pentasodium Triphosphate) and Sodium Pyrophosphate (Tetrasodium Pyrophosphate) for Industrial Use Part 4: Determination of Loss on Ignition
Organization: BSI
Status: Active
BS 5504-1
Title:
Wall Hung WC Pan Part 1: Wall Hung WC Pan with Close Coupled Cistern. Connecting Dimensions
Organization: BSI
Year: 1977
Status: Inactive
BS EN ISO 14815
Title:
Road transport and traffic telematics - Automatic vehicle and equipment identification - System specifications
Organization: BSI
Year: 2005
Status: Active
BS EN 50289-3-1
Title:
Communication Cables - Specifications for Test Methods - Part 3-1: Mechanical Test Methods - General Requirements
Organization: BSI
Year: 2001
Status: Active
BS EN 14737-1
Title:
Space engineering Ground systems and operations Part 1: Principles and requirements
Organization: BSI
Year: 2004
Status: Inactive
BS ISO/IEC 9075-4
Title:
Information Technology - Database Languages - SQL - Part 4: Persistent Stored Modules (SQL/PSM)
Organization: BSI
Year: 2000
Status: Inactive
BS PD ISO/TR 17784
Title:
Rubber and plastics hoses and hose assemblies - Guide for use by purchasers, assemblers, installers and operating personnel
Organization: BSI
Year: 2003
Status: Active
BS 1447
Title:
Specification for Mastic asphalt (limestone fine aggregate) for roads, footways and pavings in building
Organization: BSI
Year: 1988
Status: Inactive
BS 6363
Title:
Welded Cold Formed Steel Structural Hollow Sections
Organization: BSI
Year: 1983
Status: Inactive
BS PD IEC TR 61282-7
Title:
Fibre optic communication system design guides Part 7: Statistical calculation of chromatic dispersion
Organization: BSI
Year: 2003
Status: Active
BS EN 61277
Title:
Terrestial Photovoltaic (PV) Power Generating Systems - General and Guide
Organization: BSI
Year: 1998
Status: Inactive
BS 2690-1
Title:
Water Used in Industry Part 1: Copper and Iron
Organization: BSI
Status: Inactive
BUMED 1050.2B
Title:
(MEDCOM-09B1) LEAVE AND LIBERTY FOR NAVAL PERSONNEL NAVMEDCOM
Organization: NAVY
Year: 1988
Status: Inactive
BS EN 60679-4
Title:
Quartz Crystal Controlled Oscillators of Assessed Quality Part 4: Sectional Specification - Capability Approval
Organization: BSI
Year: 1998
Status: Active
BS EN 133200
Title:
Harmonized System of Quality Assessment for Electronic Components Sectional Specification: Passive Filter Units for Electromagnetic Interference Suppression (Filters for Which Safety Tests Are Requ...
Organization: BSI
Year: 1999
Status: Inactive
BS CECC 17001
Title:
Specification for Harmonized system of quality assessment for electronic components - Blank detail specification - Mercury wetted make contact units for general application
Organization: BSI
Year: 1984
Status: Active
BS ISO 23603
Title:
Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour
Organization: BSI
Year: 2005
Status: Active
B30.11 INT
Title:
INTERPRETATIONS TO B30.11-1988 MONORAILS AND UNDERHUNG CRANES
Organization: ASME
Year: 1989
Status: Inactive
BS 5131-4.5
Title:
Methods of Test for Footwear and Footwear Materials - Part 4: Other Components - Section 4.5 Tensile Strength of Fibreboard
Organization: BSI
Year: 1990
Status: Active
BS EN 13919
Title:
Natural stone test methods Determination of resistance to ageing by SO2 action in the presence of humidity
Organization: BSI
Year: 2002
Status: Inactive
BS EN 61249-2-23
Title:
Materials for printed boards and other interconnecting structures Part 2-23: Reinforced base materials, clad and unclad Non-halogenated phenolic cellulose paper reinforced laminated sheets, econo...
Organization: BSI
Year: 2005
Status: Active
BS EN 531
Title:
Protective Clothing for Workers Exposed to Heat
Organization: BSI
Year: 1995
Status: Inactive
BUMED 5420.11
Title:
(BUMED-35) BUREAU OF MEDICINE AND SURGERY RISK MANAGEMENT COMMITTEE
Organization: NAVY
Year: 1990
Status: Active
BS EN 60967
Title:
Safety of Electrically Heated Blankets, Pads and Similar Flexible Heating Appliances for Household Use
Organization: BSI
Year: 1991
Status: Inactive
BS 5400-5
Title:
Steel, concrete and composite bridges Part 5: Code of practice for the design of composite bridges
Organization: BSI
Year: 2005
Status: Inactive
BS 6283-2
Title:
Safety and Control Devices for Use in Hot Water Systems - Part 2: Specification for Temperature Relief Valves for Pressures from 1 Bar to 10 Bar
Organization: BSI
Year: 1991
Status: Active
BS ISO 7971-1
Title:
CEREALS - DETERMINATION OF BULK DENSITY, CALLED "MASS PER HECTOLITRE" - PART 1: REFERENCE METHOD
Organization: BSI
Status: Inactive
BS EN 2746
Title:
Glass Fibre Reinforced Plastics - Flexural Test - Three Point Bend Method
Organization: BSI
Year: 1998
Status: Active
BS ISO 15859-13
Title:
Space systems - Fluid characteristics, sampling and test methods - Part 13: Breathing air
Organization: BSI
Year: 2004
Status: Active
BS 5550-3.9.1
Title:
Cinematography - Part 3: 35 mm film - Section 3.9 Projector spools - Subsection 3.9.1 Specification for 35 mm film spools of 610 m capacity (38 cm size) for release prints
Organization: BSI
Status: Active
BS 7698-7
Title:
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 7: Technical Declarations for Specification and Design
Organization: BSI
Year: 1996
Status: Inactive
BS A 233-236
Title:
Specification for Plain Hexagonal Thin Nut (of Class 3B UNJ Thread)
Organization: BSI
Year: 1971
Status: Active
BS EN 3196
Title:
Nuts, Hexagonal, Self-Locking, in Heat Resisting Steel FE-PA92HT (A286), Silver Plated Classification: 1100 MPa (at Ambient Temperature)/425 Degrees C
Organization: BSI
Year: 1994
Status: Active
BUMED 5420.14A
Title:
(BUMED-M8) NAVY MEDICINE RESOURCE REQUIREMENTS REVIEW BOARD
Organization: NAVY
Year: 2006
Status: Active
BS 7518
Title:
Radiation protection instrumentation - Portable, transportable or installed equipment to measure X or gamma radiation for environmental monitoring - Integrating assemblies
Organization: BSI
Year: 1995
Status: Inactive
BS 4559-1.1
Title:
Methods for Preparation of calibration gas mixtures - Part 1: Weighing methods - Section 1.1 Mixtures containing components fully vaporizable under ambient conditions
Organization: BSI
Year: 1983
Status: Inactive
BS EN ISO 13695
Title:
Optics and photonics - Lasers and laser related equipment - Test methods for the spectral characteristics of lasers
Organization: BSI
Year: 2004
Status: Active
BS ISO 15186-3
Title:
Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 3: Laboratory measurements at low frequencies
Organization: BSI
Year: 2002
Status: Inactive
BUPERS 12335.1
Title:
(OCPM-21) DEPARTMENT OF THE NAVY MERIT PROMOTION PROGRAM OCPM
Organization: NAVY
Year: 1986
Status: Inactive
BS EN ISO 10280
Title:
Steel and iron - Determination of titanium content - Diantipyrylmethane spectrophotometric method
Organization: BSI
Year: 1991
Status: Active
BS 4585-18
Title:
Methods of Test for Spices and Condiments - Part 18: Determination of Total Capsaicinoid Content of Chillies and Chilli Oleoresins (High-Performance Liquid Chromatographic Method)
Organization: BSI
Year: 1996
Status: Active
BS EN 1654
Title:
Copper and copper alloys Strip for springs and connectors
Organization: BSI
Year: 1998
Status: Active
BS EN ISO 6551
Title:
Petroleum liquids and gases - Fidelity and security of dynamic measurement - Cabled transmission of electric and/or electronic pulsed data
Organization: BSI
Year: 1983
Status: Active
BS EN 13130-8
Title:
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 8: Determination of isocyanates in plastics
Organization: BSI
Year: 2004
Status: Active
BS 2769-2.2
Title:
Hand-Held Electric- Motor-Operated Tools Part 2: Particular Requirements Section 2.2: Screwdrivers and Impact Wrenches
Organization: BSI
Year: 1984
Status: Inactive
BS 1000[614]
Title:
Universal Decimal Classification - English full edition - FID publication no. 483 - UDC 614 Public health and hygiene. Accident prevention
Organization: BSI
Year: 1990
Status: Inactive
BS 6043-3.2
Title:
Methods of Sampling and Test for Carbonaceous Materials Used in Aluminium Manufacture Part 3: Electrodes Section 3.2: Determination of Density of Cathode Blocks and Prebaked Anodes
Organization: BSI
Year: 1997
Status: Active
B93.110M
Title:
Pneumatic Fluid Power - Cylinders, 10 Bar (1 000 kPa) Series - Rod End Clevis - Mounting Dimensions
Organization: NFPA
Year: 1987
Status: Inactive
BS DD ENV 50232
Title:
Aeronautical Ground Lighting Electrical Installation Isolating Transformer: Equipment Specifications and Tests
Organization: BSI
Year: 1997
Status: Active
BS 7097
Title:
Procedure for Allocating an International Securities Identification Number (ISIN)
Organization: BSI
Year: 1990
Status: Inactive
BS 1892-2.3
Title:
Gymnasium Equipment Part 2. Particular Requirements Section 2.3. Specification for Boxes, Bucks and Horses
Organization: BSI
Year: 1986
Status: Inactive
BS DD ENV 1257-2
Title:
Identification Card Systems - Rules for Personal Identification Number (PIN) Handling in Intersector Environments Part 2: PIN Protection
Organization: BSI
Year: 1998
Status: Inactive
BS EN 910
Title:
Destructive Tests on Welds in Metallic Materials - Bend Tests
Organization: BSI
Year: 1996
Status: Inactive
BS 6897-1
Title:
Experimental Determination of Mechanical Mobility Part 1: Specification for Transducers
Organization: BSI
Year: 1987
Status: Inactive
BS EN 190108
Title:
Specification for Harmonized system of quality assessment for electronic components - Family specification - TTL advanced SCHOTTKY digital integrated circuits - Series 54 AS, 74 AS
Organization: BSI
Year: 1988
Status: Active
BS AU 146B
Title:
Specification for Standard automatic roller-type coupling for semi-trailers not exceeding 7 1/4 tons laden weight
Organization: BSI
Year: 1970
Status: Active
BS 5131-5.9
Title:
Methods of Test for Footwear and Footwear Materials Part 5: Testing of Complete Footwear Section 5.9: Strength of Top Piece Attachment to Shoe Heels
Organization: BSI
Year: 1979
Status: Active
BS 6096-1
Title:
Marking Inks and Solder Resist Coating Materials for Printed Circuits Part 1: Methods of Test
Organization: BSI
Year: 1981
Status: Inactive
BP X50-890
Title:
Quality of service in hairdressing salons
Organization: AFNOR
Year: 2005
Status: Active
BS 1088 & 4079
Title:
Plywood for Marine Craft
Organization: BSI
Status: Inactive
BS DD 136-1
Title:
Token Ring Local Area Network Part 1: Technical Specification
Organization: BSI
Year: 1986
Status: Inactive
BS 1586
Title:
Performance Testing and Presentation of Performance Data for Refrigerant Condensing Units
Organization: BSI
Year: 1982
Status: Inactive
BS ISO/IEC 10028
Title:
Information Technology - Telecommunications and Information Exchange Between Systems - Definition of the Relaying Functions of a Network Layer Intermediate System
Organization: BSI
Year: 1994
Status: Active
BS EN 1155
Title:
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
Organization: BSI
Year: 1997
Status: Active
BS PD ISO/IEC GUIDE 53
Title:
Conformity assessment Guidance on the use of an organization's quality management system in product certification
Organization: BSI
Year: 2005
Status: Inactive
BS ISO 14502-1
Title:
Determination of substances characteristic of green and black tea - Part 1: Content of total polyphenols in tea - Colorimetric method using Folin-Ciocalteu reagent
Organization: BSI
Year: 2005
Status: Active
BS EN 13746
Title:
Surfaces for sports areas Determination of dimensional changes due to the effect of varied water, frost and heat conditions
Organization: BSI
Year: 2004
Status: Active
BS 1819-1
Title:
Specification for spring interior mattresses for hospitals, institutions and government departments. Part 1: Mattresses for adult beds and cots
Organization: BSI
Status: Inactive
BS 4185-10
Title:
Specification for Machine Tool Components - Part 10: Trapezoidal Threads for Lead and Feed Screw Assemblies
Organization: BSI
Year: 1977
Status: Active
BS EN 3956
Title:
Aerospace series - Silver base alloy AG-B14001 (AgCu42Ni2)- Filler metal for brazing - Wire
Organization: BSI
Year: 2001
Status: Active
BS EN 62008
Title:
Performance characteristics and calibration methods for digital data acquisition systems and relevant software
Organization: BSI
Year: 2006
Status: Active
BS EN 2591-314
Title:
Elements of Electrical and Optical Connection - Test Methods Part 314: Immersion at Low Air Pressure
Organization: BSI
Year: 1998
Status: Active
BS 6686-2.1
Title:
Methods for Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements Section 2.1: Vacuum Cleaners
Organization: BSI
Year: 1990
Status: Inactive
BS ISO/IEC 10164-14
Title:
Information Technology - Open Systems Interconnection - Systems Management: Confidence and Diagnostic Test Categories
Organization: BSI
Year: 1997
Status: Inactive
BS ISO/IEC 8613-7
Title:
Information Technology - Open Document Architecture (ODA) and Interchange Format: Raster Graphics Content Architectures
Organization: BSI
Year: 1995
Status: Inactive
BS EN 10003-1
Title:
Metallic Materials - Brinell Hardness Test Part 1: Test Method
Organization: BSI
Year: 1995
Status: Inactive
BS 6057-3.1
Title:
Rubber Latices Part 3: Methods of Test Section 3.1: Determination of Mechanical Stability of Natural Rubber Latex Concentrate
Organization: BSI
Year: 1996
Status: Inactive
BS EN 60835-2-8
Title:
Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 2: Measurements on Terrestrial Radio-Relay Systems Section 2.8: Adaptive Equalizer
Organization: BSI
Year: 1996
Status: Active
BS EN 12052
Title:
Health informatics - Digital imaging - Communication, workflow and data management
Organization: BSI
Year: 2004
Status: Inactive
BS CECC 35001
Title:
CW Power Amplifier Travelling Wave Tubes up to 500 Watts: Blank Detail Specification
Organization: BSI
Year: 1978
Status: Inactive
BS 8006
Title:
Code of Practice for Strengthened/Reinforced Soils and Other Fills
Organization: BSI
Year: 1995
Status: Inactive
BS 684-2.35
Title:
Methods of Analysis of Fats and Fatty Oils Part 2: Other Methods Section 2.35: Analysis by Gas Chromatography of Methyl Esters of Fatty Acids
Organization: BSI
Year: 1990
Status: Inactive
BS EN 50109-2-3
Title:
Hand Crimping Tools - Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications - Part 2: Particular Requirements - Section 2.3 Contacts of Ele...
Organization: BSI
Year: 1996
Status: Active
BS EN 14970
Title:
Textiles - Knitted fabrics - Determination of stitch length and yarn linear density in weft knitted fabrics
Organization: BSI
Year: 2006
Status: Active
BS 7319-7
Title:
Analysis of Sodium Chloride for Industrial Use - Part 7: Method for Determination of Copper Content
Organization: BSI
Year: 1990
Status: Active
BS EN 14941
Title:
Copper and copper alloys Determination of cobalt content FAAS method
Organization: BSI
Year: 2006
Status: Active
BS 2548
Title:
Specification for Wood Wool for General Packaging Purposes
Organization: BSI
Year: 1986
Status: Active
BS 3680-8D
Title:
Measurement of Liquid Flow in Open Channels: Measuring Instruments and Equipment: Cableway System for Stream Gauging
Organization: BSI
Year: 1980
Status: Inactive
BS EN 632
Title:
Agricultural Machinery - Combine Harvesters and Forage Harvesters - Safety
Organization: BSI
Year: 1996
Status: Inactive
BS 4300/15
Title:
Specification (Supplementary Series) for Wrought Aluminium and Aluminium Alloys for General Engineering Purposes /15: 7020 Bar, Extruded Round Tube and Sections
Organization: BSI
Year: 1973
Status: Inactive
BS 4267-8
Title:
Ammonium nitrate - Part 8: Methods for determination of chloride content
Organization: BSI
Year: 1987
Status: Active
BS 2F 126
Title:
34 G/Square Metres Nylon Parachute Fabric
Organization: BSI
Year: 1990
Status: Active
BS EN 13036-3
Title:
Road and airfield surface characteristics - Test methods - Part 3: Measurement of pavement surface horizontal drainability
Organization: BSI
Year: 2003
Status: Active
BS EN 1636-3
Title:
Plastics Piping Systems for Non-Pressure Drainage and Sewerage - Glass-Reinforced Thermosetting Plastics (GRP) Based on Unsaturated Polyester Resin (UP) - Part 3: Fittings
Organization: BSI
Year: 2001
Status: Inactive
BS 4148
Title:
Abbreviation of Title Words and Titles of Publications
Organization: BSI
Year: 1985
Status: Active
BS EN 61041-3
Title:
Non-Broadcast Video Tape Recorders - Methods of Measurement Part 3: Audio Characteristics for FM Recording
Organization: BSI
Year: 1994
Status: Active
BS 3130-8
Title:
Glossary of Packaging Terms Part 8: Plastic Sacks
Organization: BSI
Year: 1987
Status: Inactive
BS AU 50-3-5
Title:
Tyres and Wheels Part 3: Valves Section 5: Dimensions for ISO Core Chamber No. 1 for Tyre Inflation Valves
Organization: BSI
Year: 1983
Status: Inactive
BS ISO 9393-1
Title:
Thermoplastics valves for industrial applications - Pressure test methods and requirements - Part 1: General
Organization: BSI
Year: 2004
Status: Active
BS QC 400000
Title:
Fixed Resistors for Use in Electronic Equipment: Generic Specification
Organization: BSI
Year: 1990
Status: Inactive
BS EN ISO 9773
Title:
Plastics Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
Organization: BSI
Year: 1999
Status: Active
BS ISO 10459
Title:
Textile machinery - Dyeing and finishing machines - Designation of operating ranges of component parts
Organization: BSI
Year: 1993
Status: Active
BS EN 10045-1
Title:
Charpy Impact Test on Metallic Materials - Part 1: Test Method (V- and U-Notches)
Organization: BSI
Year: 1990
Status: Inactive
BS PP 7319
Title:
Construction Drawing Practice for Universities, Polytechnics and Colleges
Organization: BSI
Year: 1989
Status: Active
BS 5400-10C
Title:
Steel, Concrete and Composite Bridges Part 10C: Code of Practice for Fatique
Organization: BSI
Year: 1999
Status: Inactive
BS 6057-3.6
Title:
Rubber Latices Part 3: Methods of Test Section 3.6: Determination of Volatile Fatty Acid Number of Natural Rubber Latices
Organization: BSI
Year: 1993
Status: Active
BS 1790
Title:
Specification for Length bars and their accessories - (Imperial Units)
Organization: BSI
Status: Active
BS 882
Title:
Aggregates from Natural Sources for Concrete
Organization: BSI
Year: 1992
Status: Inactive
BS 1153
Title:
Recommendations for Processing and storage of silver-gelatin-type microfilm
Organization: BSI
Year: 1992
Status: Active
BS EN 181103
Title:
Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fibre Optic Branching Devices - Type: Non Wavelength Selective Transmissive Star for Telecommunication ...
Organization: BSI
Year: 1998
Status: Active
BS 3962-2
Title:
Methods of Test for Clear Finishes for Wooden Furniture Part 2: Assessment of Surface Resistance to Wet Heat
Organization: BSI
Year: 1983
Status: Inactive
BS ISO 4664-2
Title:
Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 2: Torsion pendulum methods at low frequencies
Organization: BSI
Year: 2006
Status: Active
BS EN 62071-2
Title:
Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape Format D-7 Part 2: Compression format
Organization: BSI
Year: 2006
Status: Active
BS 3680-3H
Title:
Measurement of Liquid Flow in Open Channels Part 3: Stream Flow Measurement Part 3H: Electromagnetic Method Using a Full-Channel- Width Coil
Organization: BSI
Year: 1993
Status: Inactive
BS EN ISO 22088-2
Title:
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 2: Constant tensile load method
Organization: BSI
Year: 2006
Status: Active
BS 3531-17
Title:
Surgical Implants Part 17: Recommendations for the Care and Handling of Orthopaedic Surgical Implants
Organization: BSI
Year: 1985
Status: Inactive
BS 6990
Title:
Code of Practice for Welding on Steel Pipes Containing Process Fluids or Their Residuals
Organization: BSI
Year: 1989
Status: Active
BS 1647-2
Title:
pH Measurement - Part 2: Specification for Reference Value Standard Solutions and Operational Reference Standard Solutions
Organization: BSI
Year: 1984
Status: Active
BS ISO 7858-2
Title:
Measurement of Water Flow in Closed Conduits - Combination Meters for Cold Potable Water - Part 2: Installation Requirements
Organization: BSI
Year: 2001
Status: Inactive
BS DD ENV ISO 14819-3
Title:
Traffic and Travel Information (TTI) - TTI Messages Via Traffic Message Coding - Part 3: Location Referencing for ALERT-C
Organization: BSI
Year: 2001
Status: Inactive
BS 6829-4.5
Title:
Analysis of Surface Active Agents (Raw Materials) Part 4: Ethylene Oxide Adducts Section 4.5: Method for Determination of Sulphated Ash
Organization: BSI
Year: 1989
Status: Active
BS EN 60726
Title:
Dry-type power transformers
Organization: BSI
Year: 2003
Status: Inactive
BS EN 60068-2-52
Title:
Environmental testing Part 2: Tests Test Kb. Salt mist cyclic (sodiumchloride solution)
Organization: BSI
Year: 1996
Status: Inactive
BS 6404-4
Title:
Magnetic Materials Part 4: Methods of Measurement of the d.c. Magnetic Properties of Solid Steels
Organization: BSI
Year: 1986
Status: Inactive
BS 1365
Title:
Specification for Short-range short-stem thermometers
Organization: BSI
Year: 1990
Status: Active
BS 6395
Title:
Method for Numerical designation of fabric faults by visual inspection
Organization: BSI
Year: 1983
Status: Active
BS IEC 60404-1
Title:
Magnetic Materials - Part 1: Classification
Organization: BSI
Year: 2000
Status: Inactive
BS ISO 3287
Title:
Powered industrial trucks - Symbols for operator controls and other displays
Organization: BSI
Year: 2000
Status: Active
BS EN 50165
Title:
Electrical Equipment of Non-Electric Appliances for Household and Similar Purposes - Safety Requirements
Organization: BSI
Year: 1997
Status: Inactive
BS 3724
Title:
Terms Relating to Fibre Ropes and Cordage
Organization: BSI
Year: 1991
Status: Inactive
BS EN ISO 14527-1
Title:
Plastics - Urea-Formaldehyde and Urea/Melamine-Formaldehyde Powder Moulding Compounds (UF- and UF/MF-PMCs) - Part 1: Designation System and Basis for Specifications
Organization: BSI
Year: 2000
Status: Active
BS EN 61196-3-2
Title:
Radio Frequency Cables Part 3.2: Coaxial Cables for Digital Communication in Horizontal Floor Wiring - Detail Specification for Coaxial Cables with Solid Dielectric for Local Area Networks of 185 m...
Organization: BSI
Year: 1998
Status: Active
BS EN 12971-2
Title:
Reinforcements - Specification for Textile Glass Chopped Strands - Part 2: Test Methods and General Requirements
Organization: BSI
Year: 1999
Status: Active
BS CECC 30401 023
Title:
Specification for Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors - Rectangular insulated non-metallic case, rigid radial terminations - Full assessment level
Organization: BSI
Year: 1979
Status: Active
BS EN 12455
Title:
Resilient Floor Coverings - Specification for Corkment Underlay
Organization: BSI
Year: 1999
Status: Active
BS EN 10016-2
Title:
Non-Alloy Steel Rod for Drawing and/or Cold Rolling Part 2: Specific Requirements for General Purpose Rod
Organization: BSI
Year: 1995
Status: Inactive
BS 6776
Title:
Specification for Edison Screw Lampholders
Organization: BSI
Year: 1990
Status: Inactive
BS EN 50263
Title:
Electromagnetic Compatibility (EMC) - Product Standard for Measuring Relays and Protection Equipment
Organization: BSI
Year: 2000
Status: Inactive
BS EN ISO 787-10
Title:
General methods of test for pigments and extenders - Part 10: Determination of density - Pyknometer method
Organization: BSI
Year: 1993
Status: Active
BS 5588-7
Title:
Fire precautions in the design, construction and use of buildings - Part 7: Code of practice for the incorporation of atria in buildings
Organization: BSI
Year: 1997
Status: Inactive
BS 9075 N023
Title:
Detail specification for Fixed monolithic ceramic dielectric capacitors (type 1B) Rectangular non-metallic case, centred wires on one face Full assessment level
Organization: BSI
Year: 1978
Status: Inactive
BS 7028
Title:
Eye protection for industrial and other uses - Guidance on selection, use and maintenance
Organization: BSI
Year: 1999
Status: Active
BS 5478-3
Title:
Calculators and Adding Machines Part 3: Specification for Keytop and Printed or Displayed Symbols
Organization: BSI
Year: 1982
Status: Inactive
BS EN 50132-2-1
Title:
Alarm Systems - CCTV Surveillance Systems for Use in Security Applications Part 2-1: Black and White Cameras
Organization: BSI
Year: 1998
Status: Inactive
BS 5550-2.4.1
Title:
Cinematography - Part 2: 16mm Film - Section 2.4: Sound - Subsection 2.4.1: Positions and Dimensions of 16 mm Negative Photographic Sound Record on 16 mm, 35/32 mm and 35/16 mm Motion-Picture Film
Organization: BSI
Year: 1978
Status: Inactive