BS IEC 61314-1-1
Title:
Fibre optic fan-outs - Part 1-1: Blank detail specification - Environmental categories 1, 2, 3, 5 and 99
Organization: BSI
Year: 1998
Status: Inactive
BS 2X 18
Title:
Specification for Shellac Varnish for Aeronautical Purposes
Organization: BSI
Status: Inactive
BS 5688-15
Title:
Orthoboric Acid (Boric Acid), Diboron Trioxide (Boric Oxide), Disodium Tetraborates, Sodium Perborates and Crude Sodium Borates for Industrial Use Part 15: Determination of Water Content of Di Sodi...
Organization: BSI
Year: 1979
Status: Inactive
BS 6201-3
Title:
Fixed Capacitors for Use in Electronic Equipment Part 3: Fixed Capacitors for Radio Interference Suppression. Selection of Methods of Test and General Requirements
Organization: BSI
Year: 1982
Status: Inactive
BS EN 3841-508
Title:
Circuit breakers - Test methods - Part 508: Centrifugal acceleration
Organization: BSI
Year: 2005
Status: Active
BS 5839-4
Title:
Fire Detection and Alarm Systems for Buildings Part 4: Specification for Control and Indicating Equipment
Organization: BSI
Year: 1988
Status: Inactive
BS 5760-4
Title:
Reliability of systems, equipment and components Part 4: Guide to the specification of dependability requirements
Organization: BSI
Year: 2003
Status: Inactive
BS 3727-12
Title:
Methods for The analysis of nickel for use in electronic tubes and valves - Part 12: Determination of Sulphur (Combustion Method)
Organization: BSI
Year: 1970
Status: Inactive
BS 4331-3
Title:
Methods for Assessing the Performance Characteristics of Ultrasonic Flaw Detection Equipment Part 3: Guidance on the In-Service Monitoring of Probes (Excluding Immersion Probes)
Organization: BSI
Year: 1974
Status: Inactive
BS 4541
Title:
Polyurethane Interior Foam Cores for Domestic Mattresses for Adults
Organization: BSI
Year: 1970
Status: Inactive
BS DD ENV 13735
Title:
Health Informatics - Interoperability of Patient Connected Medical Devices
Organization: BSI
Year: 2001
Status: Active
BS 5750-4
Title:
Quality systems Part 4. Guide to the use of BS EN ISO 9001 `Model for quality assurance in design, development, production, installation and servicing (Formerly BS 5750:Part 1)', BS EN ISO 9002 `Mo...
Organization: BSI
Year: 1995
Status: Inactive
BS EN 12927-6
Title:
Safety requirements for cableway installations designed to carry persons Ropes Part 6: Discard criteria
Organization: BSI
Year: 2004
Status: Inactive
BS EN ISO 787-3
Title:
General Methods of Test for Pigments and Extenders - Part 3: Determination of Matter Soluble in Water - Hot Extraction Method
Organization: BSI
Year: 2001
Status: Active
BS 2047-1
Title:
Textile Machinery and Accessories - Cylindrical Sliver Cans Part 1: Specification for Dimensions
Organization: BSI
Year: 1983
Status: Inactive
BS PP 666
Title:
Language of Labels
Organization: BSI
Year: 1991
Status: Inactive
BS 1591
Title:
Specification for Corrosion resisting high silicon iron castings
Organization: BSI
Year: 1975
Status: Active
BS EN 60953-2
Title:
Rules for Steam Turbine Thermal Acceptance Tests Part 2: Method B: Wide Range of Accuracy for Various Types and Sizes of Turbines
Organization: BSI
Year: 1996
Status: Active
BS 4584-3
Title:
Specification for Metal-Clad Base Materials for Printed Circuits Part 3: Epoxide Woven Glass Fabric Copper-Clad Laminated Sheet, Flame Retardant Grade: EP-GC-Cu-3
Organization: BSI
Year: 1972
Status: Inactive
BS 5G 178-1
Title:
Crimped Joints for Aircraft Electrical Cables and Wires - Part 1: Specification for Design Requirements (Including Tests) for Components and Tools
Organization: BSI
Year: 1993
Status: Active
BS 4317-19
Title:
Methods of Test for Cereals and Pulses - Part 19: Determination of Protein Quality of Wheat by the Sodium Dodecyl Sulphate (SDS) Test
Organization: BSI
Year: 1990
Status: Active
BS ISO/IEC 10746-4
Title:
Information Technology - Open Distributed Processing - Reference Model: Architectural Semantics
Organization: BSI
Year: 1999
Status: Inactive
BS 2782-10 METH: 1008D
Title:
Methods of Testing Plastics Part 10: Glass Reinforced Plastics Method 1008D: Determination of Apparent Interlaminar Shear Strength on Rods Made of Roving- Reinforced Resins
Organization: BSI
Year: 1996
Status: Inactive
BS 6200-3.19.2
Title:
Sampling and analysis of iron, steel and other ferrous metals - Part 3: Methods of analysis - Section 3.19 Determination of molybdenum - Subsection 3.19.2 Ferromolybdenum: gravimetric method
Organization: BSI
Year: 1992
Status: Active
BS 9043
Title:
Rules for the Preparation of Detail Specifications for Gas- Filled Microwave Switching Tubes of Assessed Quality: Pre-TR Tubes. Full Assessment Level
Organization: BSI
Year: 1977
Status: Inactive
BS 7285
Title:
Method for Describing Characteristics of Servo-Hydraulic Test Equipment for Generating Vibration
Organization: BSI
Year: 1990
Status: Inactive
BS PD 60065
Title:
Interpretation Sheets for BS EN 60065:1998, Audio, Video and Similar Electronic Apparatus - Safety Requirements
Organization: BSI
Year: 2001
Status: Active
BS 3951-1.2
Title:
Freight Containers Part 1: General Section 1.2: Corner Fittings for Series 1 Freight Containers
Organization: BSI
Year: 1985
Status: Inactive
BS DD CEN/TS 13130-10
Title:
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 10: Determination of acrylamide in food simulants
Organization: BSI
Year: 2005
Status: Active
BS 7106-4
Title:
Guide to Recording Techniques for Information on Identification Cards Part 4: Location of Read-Only Magnetic Tracks - Tracks 1 and 2
Organization: BSI
Year: 1990
Status: Inactive
BS ISO 13690
Title:
Cereals, Pulses and Milled Products - Sampling of Static Batches
Organization: BSI
Year: 2000
Status: Inactive
BS IEC 60092-204
Title:
Electrical installations in ships - Part 204: System design - Electric and electrohydraulic steering gear
Organization: BSI
Year: 2001
Status: Active
BS 2L 77
Title:
Specification for Forging Stock and Forgings of Aluminium-Copper-Magnesium-Silicon-Manganese Alloy - (Solution Treated and Precipitation Treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
Organization: BSI
Year: 1971
Status: Active
BS EN 586-3
Title:
Aluminium and aluminium alloys - Forgings - Part 3: Tolerances on dimensions and form
Organization: BSI
Year: 2002
Status: Active
BS 5072-2
Title:
Methods of Test for Sodium Fluoride for Industrial Use Part 2: Determination of Moisture Content
Organization: BSI
Year: 1974
Status: Active
BS 5507-1
Title:
Methods of test for Falsework equipment - Part 1: Floor centres
Organization: BSI
Year: 1977
Status: Active
BS EN 12305
Title:
Biotechnology - Modified Organisms for Application in the Environment - Guidance for the Sampling Strategies for Deliberate Releases of Genetically Modified Plants
Organization: BSI
Year: 1998
Status: Active
BS EN ISO 2580-2
Title:
Plastics - Acrylonitrilebutadiene- styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
Organization: BSI
Year: 2004
Status: Inactive
BS EN 1135
Title:
Method for Determination of Ash of Fruit and Vegetable Juices
Organization: BSI
Year: 1995
Status: Active
BS 5345-8
Title:
Code of practice for Selection, installation and maintenance of electrical apparatus for use in potentially explosive atmospheres (other than mining applications or explosive processing and manufac...
Organization: BSI
Year: 1980
Status: Inactive
BS 4742-2
Title:
Hydraulic Equipment for Agricultural Machinery Part 2: Specification for Quick-Action Hydraulic Couplers for General Purposes
Organization: BSI
Year: 1993
Status: Active
BS TA 51
Title:
Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mmu2) (limiting ruling section over 100 mm up to and including 150 mm)
Organization: BSI
Year: 1973
Status: Inactive
BS 3900-F18
Title:
Methods of Test for Paints - Part F18: Determination of Resistance to Corrosion under a Wet (Salt Fog)/Dry/Humidity Cycle
Organization: BSI
Year: 1998
Status: Inactive
BS 7227
Title:
Procedures for the Application of ISO 7812 to Allocate UK Issuer Identification Numbers (UK IINs) for Use on Identification Cards
Organization: BSI
Year: 1990
Status: Active
BS EN 28362-1
Title:
Injection Containers for Injectables and Accessories Part 1: Injection Vials Made of Glass Tubing
Organization: BSI
Year: 1993
Status: Inactive
BS 5838-2
Title:
Dry Packaged Cementitious Mixes Part 2: Prepacked Mortar Mixes
Organization: BSI
Year: 1980
Status: Inactive
BS ISO 3686-2
Title:
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle - Testing of the Accuracy - Part 2: Portal Type ...
Organization: BSI
Year: 2000
Status: Active
BS 4401-8
Title:
Methods of test Meat and meat products - Part 8: Determination of nitrite content
Organization: BSI
Year: 1976
Status: Active
BS 6450-1
Title:
Private branch exchanges for connection to public switched telephone networks run by certain public telecommunication operators Part 1: Specification for general requirements
Organization: BSI
Year: 1993
Status: Inactive
BS EN ISO 7808
Title:
Plastics - Thermosetting Moulding Materials - Determination of Transfer Flow
Organization: BSI
Year: 1993
Status: Active
BS 5258-1 SUPP 1
Title:
Safety of Domestic Gas Appliances Part 1: Central Heating Boilers and Circulators Supplement 1: Fan-Powered Appliances
Organization: BSI
Year: 1983
Status: Inactive
BS EN 13377
Title:
Prefabricated timber formwork beams Requirements, classification and assessment
Organization: BSI
Year: 2002
Status: Active
BS 2782-8 METH: 830A
Title:
Methods of Testing Plastics - Part 8: Other Properties - Method 830A: Methods of Test for the Determination of the Effects of Immersion in Liquid Chemicals
Organization: BSI
Year: 1999
Status: Inactive
BS EN 13658-1
Title:
Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering
Organization: BSI
Year: 2005
Status: Active
BS EN 62333-1
Title:
Noise suppression sheet for digital devices and equipment Part 1: Definitions and general properties
Organization: BSI
Year: 2006
Status: Active
BS 5504-2
Title:
Wall Hung WC Pan Part 2: Wall Hung WC Pan with Independent Water Supply. Connecting Dimensions
Organization: BSI
Year: 1977
Status: Inactive
BS 3019-2
Title:
General Recommendations for Manual Inert-Gas Tungsten-Arc Welding - Part 2: Austenitic Stainless and Heat-Resisting Steels
Organization: BSI
Status: Inactive
BS DD 203-1
Title:
Industrial Automation: Shop Floor Production Part 1: Reference Model for Standardization and a Methodology for Identification of Requirements
Organization: BSI
Year: 1991
Status: Active
BS ISO 14963
Title:
Mechanical vibration and shock - Guidelines for dynamic tests and investigations on bridges and viaducts
Organization: BSI
Year: 2005
Status: Active
BS EN 26246
Title:
Methods of Test for Petroleum and Its Products Part 131: Petroleum Products - Motor Gasoline and Aviation Fuels - Determination of Existent Gum - Jet Evaporation Method
Organization: BSI
Year: 1994
Status: Active
BS ISO 19116
Title:
Geographic information Positioning services
Organization: BSI
Year: 2005
Status: Inactive
BS EN ISO 14126
Title:
Fibre-reinforced plastic composites Determination of compressive properties in the in-plane direction
Organization: BSI
Year: 1999
Status: Active
BS 7698-6
Title:
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 6: Test Methods
Organization: BSI
Year: 1993
Status: Inactive
BS EN 917
Title:
Plastics Piping Systems - Thermoplastics Valves - Test Methods for Resistance to Internal Pressure and Leaktightness
Organization: BSI
Year: 1997
Status: Active
BS 4586
Title:
Spiral Wire Reinforced Rubber Covered Hydraulic Hoses and Hose Assemblies
Organization: BSI
Year: 1992
Status: Inactive
BS 2000-223
Title:
Methods of test for Petroleum and its products Part 223. Determination of ash of petroleum products containing mineral matter
Organization: BSI
Year: 1993
Status: Active
BS EN ISO 18757
Title:
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method
Organization: BSI
Year: 2006
Status: Active
BS ISO/IEC ISP 11185-3
Title:
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 3: FVT215, FVT216 - Application RIO Record Lo...
Organization: BSI
Year: 1995
Status: Inactive
BS EN 1691
Title:
EDI - Message - Quality Data Message (QALITY)
Organization: BSI
Year: 1996
Status: Active
B40-380
Title:
Refractory products. Prepared unshaped materials. Dense and insulating hydraulic cements. Determination of limited temperature of using.
Organization: AFNOR
Year: 1989
Status: Active
BS EN 61180-2
Title:
High-Voltage Test Techniques for Low-Voltage Equipment Part 2: Test Equipment
Organization: BSI
Year: 1995
Status: Inactive
BS ISO 1436-2
Title:
Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification - Part 2: Water-based fluid applications
Organization: BSI
Year: 2006
Status: Inactive
BS ISO/IEC 13235-1
Title:
Information Technology - Open Distributed Processing - Trading Function: Specification
Organization: BSI
Year: 1999
Status: Active
BS ISO/IEC 13422
Title:
Information Technology - Data Interchange on 90 mm Flexible Disk Cartridges 10 MByte Capacity Using Sector Servo Tracking ISO Type 304
Organization: BSI
Year: 1995
Status: Active
BUMED 6000.12A
Title:
(BUMED-05B1) CLINICAL INVESTIGATION PROGRAM (CIP)
Organization: NAVY
Year: 2000
Status: Active
BS AU 210-2
Title:
Drawbars for Caravans and Light Trailers - Part 2: Specification for the Design of Aluminium Drawbars and Chassis
Organization: BSI
Year: 1994
Status: Active
BS ISO 17475
Title:
Corrosion of metals and alloys Electrochemical test methods Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
Organization: BSI
Year: 2006
Status: Inactive
BS 7741
Title:
Insulating Hollow Tubes for Electrical Purposes
Organization: BSI
Year: 1994
Status: Inactive
BS ISO 16612-1
Title:
Graphic technology - Variable printing data exchange - Part 1: Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
Organization: BSI
Year: 2006
Status: Active
BS 1565-2
Title:
Galvanized Mild Steel Indirect Cylinders, Annular or Saddle-Back Type Part 2: Metric Units
Organization: BSI
Year: 1973
Status: Inactive
BS EN 2435-001
Title:
Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 001: Minimum requirements
Organization: BSI
Year: 2006
Status: Active
BS 7164-31.1
Title:
Chemical Tests for Raw and Vulcanized Rubber Part 31: Determination of Anti-Degradants Section 31.1: High-Performance Liquid Chromatography
Organization: BSI
Year: 1997
Status: Inactive
BS QC 760100
Title:
Harmonized System of Quality Assessment for Electronic Components Semiconductor Devices - Integrated Circuits - Sectional Specification for Film Integrated Circuits and Hybrid Film Integrated Circu...
Organization: BSI
Year: 1997
Status: Active
BS 1723-2
Title:
Brazing Part 2: Guide to Brazing
Organization: BSI
Year: 1986
Status: Inactive
BS 4361-27
Title:
Woodworking machines - Part 27: Nomenclature for disc sanding machines with spindle in fixed position
Organization: BSI
Year: 1990
Status: Active
BS 5314-11
Title:
Specification for Gas Heated Catering Equipment Part 11: Hot Cupboards
Organization: BSI
Year: 1979
Status: Inactive
BS 4809
Title:
Specification for Radio Interference Limits and Measurements for Radio Frequency Heating Equipment
Organization: BSI
Year: 1972
Status: Inactive
BS 1425-1
Title:
Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles - Part 1: Specification for fillings and stuffings other than feather and/or down
Organization: BSI
Year: 1991
Status: Active
BS DD ENV 1893
Title:
Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature in Air at Atmospheric Pressure - Determination of Tensile Properties
Organization: BSI
Year: 1996
Status: Inactive
BS EN 12195-2
Title:
Load Restraint Assemblies on Road Vehicles - Safety - Part 2: Web Lashing Made from Man-Made Fibres
Organization: BSI
Year: 2001
Status: Active
BS EN 60034-5
Title:
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Organization: BSI
Year: 2001
Status: Inactive
BS 2C 5
Title:
Specification For Mating Dimensions of Liquid Oxygen Replenishment Couplings
Organization: BSI
Year: 1976
Status: Active
BS 5327
Title:
Specification for Swept elbow bends for fluid power applications
Organization: BSI
Year: 1976
Status: Active
BS EN 13868
Title:
Catheters - Test Methods for Kinking of Single Lumen Catheters and Medical Tubing
Organization: BSI
Year: 2002
Status: Active
BS EN ISO 228-1
Title:
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
Organization: BSI
Year: 2003
Status: Active
BS ISO 11042-2
Title:
Gas turbines - Exhaust gas emission - Part 2: Automated emission monitoring
Organization: BSI
Year: 1997
Status: Active
BUPERS 1730.1B
Title:
(NMPC-94) PARTICIPATION OF INACTIVE NAVAL RESERVE CHAPLAINS AT MILITARY FUNERALS NMPC
Organization: NAVY
Year: 1990
Status: Inactive
BS 5739
Title:
Method of Presentation of Lubrication Instructions for Machine Tools
Organization: BSI
Year: 1979
Status: Active
BS EN 866-7
Title:
Biological Systems for Testing Sterilizers and Sterilization Processes - Part 7: Particular Requirements for Self-Contained Biological Indicator Systems for Use in Moist Heat Sterilizers
Organization: BSI
Year: 2000
Status: Inactive
BS EN ISO 3325
Title:
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength
Organization: BSI
Year: 1999
Status: Active
BS EN 12373-13
Title:
Aluminium and Aluminium Alloys - Anodizing - Part 13: Measurement of Reflectance Characteristics of Aluminium Surfaces Using a Goniophotometer or an Abridged Goniophotometer
Organization: BSI
Year: 2001
Status: Inactive
BS 7046
Title:
Specification for Full-Length Parallel Grooved Pins, with Chamfer
Organization: BSI
Year: 1989
Status: Inactive
BS EN 181104
Title:
Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification: Fibre Optic Branching Devices - Type: Wavelength Selective Transmissive Star for Telecommunication Appl...
Organization: BSI
Year: 1998
Status: Active
BS EN 1227
Title:
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Long-Term Ultimate Relative Ring Deflection under Wet Conditions
Organization: BSI
Year: 1998
Status: Inactive
BS 4467
Title:
Guide to Dimensions in Designing for Elderly People
Organization: BSI
Year: 1991
Status: Active
BS ISO 3022
Title:
Cinematography - 35 mm motion-picture film perforated 16 mm (1-3-0) - Cutting and perforating dimensions
Organization: BSI
Year: 1996
Status: Active
BS 7777-3
Title:
Flat-bottomed, vertical, cylindrical storage tanks for low temperature service. Part 3: Recommendations for the design and construction of prestressed and reinforced concrete tanks and tank foundat...
Organization: BSI
Year: 1993
Status: Inactive
BS 874-1
Title:
Method for Determining Thermal Insulating Properties Part 1: Introduction, Definitions and Principles of Measurement
Organization: BSI
Year: 1986
Status: Inactive
BS 3815
Title:
Epoxide Resin Casting Systems for Electrical Applications
Organization: BSI
Status: Inactive
BS L 102
Title:
Specification for Bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy - (Solution treated and aged at room temperature) (Not exceeding 200 mm diameter or minor sectiona...
Organization: BSI
Year: 1971
Status: Inactive
BS M 93
Title:
Protection of magnesium-rich alloys against corrosion - Specification
Organization: BSI
Year: 2005
Status: Active
BS EN 20780
Title:
Packaging - Pictorial Marking for Handling of Goods
Organization: BSI
Year: 1993
Status: Inactive
BS 6244
Title:
Stationary Air Compressors
Organization: BSI
Year: 1982
Status: Inactive
BS ISO 11787
Title:
Machinery for agriculture and forestry - Data interchange between management computer and process computers - Data interchange syntax
Organization: BSI
Year: 1996
Status: Active
BS EN ISO/IEC 13818-1
Title:
Information Technology - Generic Coding of Moving Pictures and Associated Audio Information Part 1: Systems
Organization: BSI
Year: 1997
Status: Inactive
BS EN ISO 16663-2
Title:
Fishing nets Method of test for the determination of mesh size Part 2: Length of mesh
Organization: BSI
Year: 2003
Status: Active
BS 5487
Title:
Specification for Single-Hit Decision Tables
Organization: BSI
Year: 1986
Status: Inactive
BS EN 12532
Title:
Castors and Wheels - Castors and Wheels for Applications up to 1,1 m/s (4 km/h)
Organization: BSI
Year: 1999
Status: Active
BS 7014
Title:
Guide to The romanization of Chinese
Organization: BSI
Year: 1989
Status: Active
BS EN 129101
Title:
Harmonized System of Quality Assessment for Electronic Components Blank Detail Specification Wirewound Surface Mounting Inductors of Assessed Quality - Assessment Level E
Organization: BSI
Year: 1995
Status: Active
BS EN 12919
Title:
Workplace Atmospheres - Pumps for the Sampling of Chemical Agents with a Volume Flow Rate of Over 5 l/min - Requirements and Test Methods
Organization: BSI
Year: 1999
Status: Inactive
BS EN 13481-8
Title:
Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads
Organization: BSI
Year: 2006
Status: Inactive
BS ISO 11463
Title:
Corrosion of Metals and Alloys - Evaluation of Pitting Corrosion
Organization: BSI
Year: 1996
Status: Inactive
BS EN 12631
Title:
Fruit and Vegetable Juices - Enzymatic Determination of D- and L-Lactic Acid (Lactate) Content - NAD Spectrometric Method
Organization: BSI
Year: 1999
Status: Active
BN-97-6
Title:
Symposium on Memorial Tunnel Fire Ventilation Test Program - Part 1
Organization: ASHRAE
Year: 1997
Status: Inactive
BS 2750-5
Title:
Measurement of Sound Insulation in Buildings and of Building Elements Part 5: Field Measurements of Airborne Sound Insulation of Facade Elements and Facades
Organization: BSI
Year: 1980
Status: Inactive
BS 2547-10
Title:
Specification for basic dimensions of cones and tubes for winding textile yarns Part 10. Cones for cross-wound winding: values of half angles, lengths and large inner diameters
Organization: BSI
Year: 1986
Status: Inactive
BS 2869-1
Title:
Fuel Oils for Non-Marine Use Part 1: Automotive Diesel Fuel (Class A7)
Organization: BSI
Year: 1988
Status: Inactive
BS PD IEC/TR 61352
Title:
Mnemonics and symbols for integrated circuits
Organization: BSI
Year: 2006
Status: Active
BS EN 13847
Title:
Coal Tar and Pitch Based Binders and Related Products - Terminology and Classification
Organization: BSI
Year: 2001
Status: Inactive
BS AU 50-1.1.3
Title:
Tyres and Wheels Part 1: Tyres Section 1: Car Tyres Subsection 1.3: Method of Measuring Rolling Resistance
Organization: BSI
Year: 1993
Status: Inactive
BS 5705-2
Title:
Sodium Hexafluorosilicate for Industrial Use Part 2: Determination of Phosphate Content
Organization: BSI
Year: 1979
Status: Inactive
BS ISO/IEC TR 15581
Title:
Information Technology - Programming Languages - Fortran - Enhanced Data Type Facilities
Organization: BSI
Year: 2001
Status: Inactive
BS EN 355
Title:
Personal Protective Equipment Against Falls from a Height - Energy Absorbers
Organization: BSI
Year: 2002
Status: Active
BS EN ISO 10202-6
Title:
Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards Part 6: Cardholder Verification
Organization: BSI
Year: 1996
Status: Active
BS 4231
Title:
Viscosity Grades of Industrial Liquid Lubricants
Organization: BSI
Year: 1992
Status: Active
BS 5803-5
Title:
Thermal Insulation for Pitched Roof Spaces in Dwellings - Part 5: Specification for Installation of Man-Made Mineral Fibre and Cellulose Fibre Insulation
Organization: BSI
Year: 1985
Status: Active
BS ISO 9022-16
Title:
Optics and Optical Instruments - Environmental Test Methods - Part 16: Combined Bounce or Steady-State Acceleration and Dry Heat or Cold
Organization: BSI
Year: 1998
Status: Inactive
BS 3917-1
Title:
Methods for the Analysis of Manganese Ores Part 1: Manganese Dioxide (Active Oxygen)
Organization: BSI
Status: Inactive
BS 903-B17
Title:
Methods of Testing Vulcanized Rubber Part B17: Determination of Total Copper
Organization: BSI
Status: Inactive
BS EN 1590
Title:
EDI - Message - Remittance Advice Message (REMADV)
Organization: BSI
Year: 1996
Status: Inactive
BS EN 1698
Title:
EDI - Message - Forwarding and Transport Rate Information Message (IFTRIN)
Organization: BSI
Year: 1996
Status: Inactive
BS EN 61300-3-5
Title:
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-5: Examinations and Measurements - Wavelength Dependence of Attenuation
Organization: BSI
Year: 2001
Status: Inactive
BS 4037
Title:
Specification for Coir Door Mats
Organization: BSI
Status: Inactive
BS 1625-6 AND BS 4830
Title:
Specifications for Woven cotton tapes - Light, medium and heavy qualities
Organization: BSI
Year: 1972
Status: Active
BS ISO 14808
Title:
Photography - Composition of 135-Film Canisters
Organization: BSI
Year: 1998
Status: Active
BS 6049-5
Title:
Methods of Test for Tea Part 5: Determination of Water-Soluble Ash and Water-Insoluble Ash
Organization: BSI
Year: 1989
Status: Active
BS EN 1148
Title:
Heat exchangers - Water-to-water heat exchangers for district heating - Test procedures for establishing the performance data
Organization: BSI
Year: 1999
Status: Active
BS 4172
Title:
Insecticidal Efficiency of Aerosols Against Flies
Organization: BSI
Status: Inactive
BS 7319-4
Title:
Analysis of Sodium Chloride for Industrial Use - Part 4: Method for Determination of Sulphate Content
Organization: BSI
Year: 1990
Status: Active
BS EN 62403
Title:
High density recording format on CD-R/RW disc system HD-BURN format
Organization: BSI
Year: 2006
Status: Active
BS Z 15
Title:
Space Data and Information Transfer Systems - Telecommand - Data Routing Service
Organization: BSI
Year: 1998
Status: Inactive
BS 9420-F0570 TO F0582
Title:
Electronic Components of Assessed Quality Detail Specification in Accordance with BS 9400:1970
Organization: BSI
Year: 1980
Status: Inactive
BS EN ISO 8442-3
Title:
Materials and Articles in Contact with Foodstuffs - Cutlery and Table Holloware Part 3: Requirements for Silver-Plated Table and Decorative Holloware
Organization: BSI
Year: 1998
Status: Active
BS 6492-2
Title:
Transportable Accommodation Units Part 2: Recommendations for Transportation and Siting, with Guidance on Occupancy
Organization: BSI
Year: 1995
Status: Inactive
BS 7607
Title:
Graphic Technology - Prepress Digital Data Exchange - Colour Picture Data on Magnetic Tape
Organization: BSI
Year: 1992
Status: Inactive
BS ISO 11884-1
Title:
Optics and photonics - Minimum requirements for stereomicroscopes - Part 1: Stereomicroscopes for general use
Organization: BSI
Year: 2006
Status: Active
BS ISO 9718
Title:
Photography - Processed Vesicular Photographic Film - Specifications for Stability
Organization: BSI
Year: 1996
Status: Inactive
BS ISO/IEC 10164-3
Title:
Information Technology - Open Systems Interconnection - Systems Management: Attributes for Representing Relationships
Organization: BSI
Year: 1993
Status: Inactive
BS 5527 P1
Title:
Roll-Over Protective Structures on Earth- Moving Machinery: Laboratory Tests and Performance Requirements Part 1: Crawler, Wheel Loaders and Tractors, Backhoe Loaders,Graders, Tractor Scrapers and ...
Organization: BSI
Year: 1987
Status: Inactive
BS EN ISO 7458
Title:
Glass containers - Internal pressure resistance - Test methods
Organization: BSI
Year: 2004
Status: Active
BS 1344-18
Title:
Methods of Testing Vitreous Enamel Finishes - Part 18: Determination of Fluidity Behaviour: Fusion Flow Test
Organization: BSI
Year: 1981
Status: Inactive
BS DD ENV 14062-1
Title:
Identification Card Systems - Surface Transport Applications - Electronic Fee Collection - Part 1: Physical Characteristics, Electronic Signals and Transmission Protocols
Organization: BSI
Year: 2001
Status: Active
BUPERS 1640
Title:
(PERS-68) ADMINISTRATIVE DISCIPLINARY PROCESS, PROCEDURES, AND AUTHORIZED DISCIPLINARY AND MANAGEMENT ACTIONS WITHIN NAVY CORRECTIONS PROGRAM
Organization: NAVY
Year: 2005
Status: Inactive
BS 9016
Title:
Rules for the Preparation of Detail Specifications for Indicator Tubes of Assessed Quality
Organization: BSI
Year: 1970
Status: Inactive
BS 6811-1.1
Title:
Winding wires - Part 1: Basic dimensions - Section 1.1 Specification for diameters of conductors for round winding wires
Organization: BSI
Year: 1987
Status: Inactive
BS EN 61993-1
Title:
Maritime Navigation and Radiocommunication Equipment and Systems - Part 1: Shipbourne Automatic Transponder System Installation Using VHF Digital Selective Calling (DSC) Techniques - Operational an...
Organization: BSI
Year: 2001
Status: Active
BS 6726
Title:
Festoon and Temporary Lighting Cables and Cords
Organization: BSI
Year: 1998
Status: Inactive
BS EN 60118-14
Title:
Hearing Aids - Part 14: Specification of a Digital Interface Device
Organization: BSI
Year: 1998
Status: Active
BS DD ISO/TS 16489
Title:
Water quality Guidance for establishing the equivalency of results
Organization: BSI
Year: 2006
Status: Active
BS EN 605
Title:
Paints and Varnishes - Standard Panels for Testing
Organization: BSI
Year: 1992
Status: Active
BS ISO TR 13387-5
Title:
Fire Safety Engineering - Part 5: Movement of Fire Effluents
Organization: BSI
Year: 2000
Status: Active
BS 7164-27.1
Title:
Chemical Tests for Raw and Vulcanized Rubber Part 27: Methods for Determination of Iron Content Section 27.1: Atomic Absorption Spectrometry
Organization: BSI
Year: 1991
Status: Inactive
BS 7404-1.1
Title:
Telecontrol Equipment and Systems Part 1: General Considerations Section 1.1: General Principles
Organization: BSI
Year: 1991
Status: Active
BS ISO 1738
Title:
Butter - Determination of salt content
Organization: BSI
Year: 2004
Status: Active
BS CP 143-5
Title:
Sheet roof and wall coverings - Part 5: Zinc
Organization: BSI
Status: Active
BS EN 60898
Title:
Specification for Circuit-breakers for overcurrent protection for household and similar installations
Organization: BSI
Year: 1992
Status: Inactive
BS EN 12773
Title:
Footwear - Test Methods for Outsoles - Needle Tear Strength
Organization: BSI
Year: 2000
Status: Active
BS 5573
Title:
Code of Practice for Safety Precautions in the Construction of Large Diameter Boreholes for Piling and Other Purposes
Organization: BSI
Year: 1978
Status: Inactive
BS 7859
Title:
Natural Gas - Calculation of Calorific Values, Density, Relative Density and Wobbe Index from Composition
Organization: BSI
Year: 1996
Status: Inactive
BS EN 50123-7-1
Title:
Railway applications - Fixed installations - D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide
Organization: BSI
Year: 2003
Status: Active
BS EN ISO 13397-1
Title:
Periodontal Curettes, Dental Scalers and Excavators Part 1: General Requirements
Organization: BSI
Year: 1996
Status: Active
BS 6794
Title:
Reporting Measured Vibration Data for Land Vehicles
Organization: BSI
Year: 1986
Status: Active
BS EN 61603-8-1
Title:
Transmission of audio and/or video and related signals using infrared radiation Part 8-1: Digital audio and related signals
Organization: BSI
Year: 2004
Status: Active
BS PD 6434
Title:
Recommendations for the Design and Testing of Smoke Reducing Solid Fuel Burning Domestic Appliances
Organization: BSI
Status: Active
BS 7200
Title:
Specification for Synthetic-fibre needlefelts
Organization: BSI
Year: 1989
Status: Active
BS EN 3841-509
Title:
Circuit breakers Test methods Part 509: Insertion and extraction forces of signal contact terminals
Organization: BSI
Year: 2005
Status: Active
BS 2782-5 METH: 540E
Title:
Methods of Testing Plastics Part 5: Optical and Colour Properties, Weathering Method 540E: Methods of Exposure to Laboratory Light Sources - Xenon-Arc Sources
Organization: BSI
Year: 1995
Status: Inactive
BS 6068-5.5
Title:
Water Quality Part 5: Methods for Biological Testing Section 5.5: Methods of Biological Sampling: Guidance on Handnet Sampling of Aquatic Benthic Macro- Invertebrates
Organization: BSI
Year: 1985
Status: Inactive
BS 811
Title:
Specification Cycle threads
Organization: BSI
Status: Active
BS 6806-3
Title:
Formaldehyde in Textiles - Part 3: Method for Determination of Released Formaldehyde
Organization: BSI
Year: 1987
Status: Inactive
BS 4305
Title:
Specification for baths for domestic purposes made from cast acrylic sheet
Organization: BSI
Year: 1972
Status: Inactive
BS EN 22206
Title:
Complete, filled transport packages - Method for identifying parts when testing
Organization: BSI
Year: 1988
Status: Active
BUMED 6200.1E
Title:
MEDICAL SERVICES JOINT UTILIZATION OF CERTAIN ARMED FORCES MEDICAL LABORATORY FACILITIES
Organization: NAVY
Year: 1976
Status: Inactive
BS 1006-B01C-LFS4 KIT
Title:
Methods of test for colour fastness of textiles and leather. Blue wool standards. Reference standard for no. 4
Organization: BSI
Year: 1990
Status: Active
BS EN ISP 10609-2
Title:
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service Part 2: Subnetwork-Type Independent Requireme...
Organization: BSI
Year: 1993
Status: Inactive
BS EN ISO 1133
Title:
Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Organization: BSI
Year: 2005
Status: Inactive
BS 5132-3
Title:
Embossed Credit Cards Part 3: Magnetic Stripe Data Content for Track 3
Organization: BSI
Year: 1979
Status: Inactive
BS EN 61300-3-11
Title:
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures Part 3.11: Examinations and Measurements - Engagement and Separation Forces
Organization: BSI
Year: 1997
Status: Active
BS EN 60684-1
Title:
Flexible insulating sleeving Part 1: Definitions and general requirements
Organization: BSI
Year: 2003
Status: Active
BS 7001
Title:
Specification for Interchangeability and safety of a standardized luminaire supporting coupler
Organization: BSI
Year: 1988
Status: Active
BS EN ISO 10304-2
Title:
Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
Organization: BSI
Year: 1997
Status: Inactive
BS 4547
Title:
Classification of Fires
Organization: BSI
Year: 1972
Status: Inactive
BS 2782-5 METHOD 508D
Title:
Methods of Testing Plastics Part 5: Miscellaneous Methods Method 508D: Flammability of a Specimen 150 mm Square, Not Exceeding 50 mm in Thickness, of a Plastics Material (Alcohol Cup Test) (Laborat...
Organization: BSI
Year: 1970
Status: Inactive
BS EN 12541
Title:
Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10
Organization: BSI
Year: 2003
Status: Active
BS EN 13612
Title:
Performance evaluation of in vitro diagnostic medical devices
Organization: BSI
Year: 2002
Status: Active
BS MA 86
Title:
Glossary of Terms used in shipbuilding: list of equivalent terms for ship screw propellers
Organization: BSI
Year: 1979
Status: Inactive
BS 5711-5
Title:
Methods of Sampling and Test for Glycerol Part 15: Determination of Heavy Metals Content
Organization: BSI
Year: 1979
Status: Inactive
BS 638-2
Title:
Arc Welding Power Sources, Equipment and Accessories Part 2: Air Cooled Power Sources for Manual Metal-Arc Welding with Covered Electrodes and for TIG Welding
Organization: BSI
Year: 1979
Status: Inactive
BS 3939-3
Title:
Graphical Symbols for Electrical Power, Telecommunications and Electronics Diagrams Part 3: Conductors and Connecting Devices
Organization: BSI
Year: 1985
Status: Inactive
BS EN 1615
Title:
Enteral Feeding Catheters and Enteral Giving Sets for Single Use and Their Connectors - Design and Testing
Organization: BSI
Year: 2000
Status: Inactive
BS ISO 14152
Title:
Neutron radiation protection shielding - Design principles and considerations for the choice of appropriate materials
Organization: BSI
Year: 2002
Status: Active
BS DD ENV 13258
Title:
Materials and Articles in Contact with Foodstuffs - Test Methods for Crazing Resistance of Ceramic Articles
Organization: BSI
Year: 1999
Status: Inactive
BS 7709-4
Title:
Analysis of Extract Solutions of Glass Part 4: Method for Determination of Aluminium Oxide by Molecular Absorption Spectrometry
Organization: BSI
Year: 1993
Status: Active
BS 4289-8
Title:
Methods for the Analysis of Oilseeds Part 8: Check of the Calibration of Moisture Meters
Organization: BSI
Year: 1988
Status: Inactive
BS 5874
Title:
Determination of the Electric Strength of Insulating Oils
Organization: BSI
Year: 1980
Status: Inactive
BS EN 60332-2-1
Title:
Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable Apparatus
Organization: BSI
Year: 2005
Status: Active
BUMED 5300.8
Title:
(BUMED-23) DISPOSITION OF REHABILITATED ALCOHOL DEPENDENT OR ABUSER AIRCREW, AIR CONTROLLERS, HYPOBARIC CHAMBER INSIDE OBSERVERS AND INSTRUCTORS
Organization: NAVY
Year: 1992
Status: Active
BS 6336
Title:
Guide to the Development of Fire Tests, the Presentation of Test Data and the Role of Tests in Hazard Assessment
Organization: BSI
Year: 1998
Status: Active
BS 2000-503
Title:
Methods of test for Petroleum and its products - BS 2000-503: Determination of chlorine and bromine content - Wavelength-dispersive X-ray fluorescence spectrometry
Organization: BSI
Year: 2004
Status: Active
BS 4618-5.1
Title:
Recommendations for the Presentation of Plastics Design Data - Part 5: Other Properties - Section 5.1: Density
Organization: BSI
Year: 1970
Status: Inactive
BS 3421
Title:
Specification for Performance of Electrically Heated Sterilizing Ovens
Organization: BSI
Status: Inactive
BS 4737-3.6
Title:
Specification for Intruder Alarm Systems in Buildings - Part 3: Requirements for Detection Devices - Section 3.6 Acoustic Detectors
Organization: BSI
Year: 1978
Status: Active
BS 6780
Title:
Specification for Through Thickness Reduction of Area of Steel Plates and Wide Flats
Organization: BSI
Year: 1986
Status: Inactive
BS 6161-7
Title:
Methods of test for Anodic oxidation coatings on aluminium and its alloys - Part 7: Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light
Organization: BSI
Year: 1984
Status: Inactive
BS 5820
Title:
Methods of Test for Determination of Certain Physical and Mechanical Properties of Timber in Structural Sizes
Organization: BSI
Year: 1979
Status: Inactive
BS 5350-C12
Title:
Methods of Test for Adhesives Part C12: 180 Degrees Peel Test for Flexible-to-Flexible Bonded Assemblies (T-Peel Test)
Organization: BSI
Year: 1994
Status: Active
BS 9364 N008 & N010
Title:
Detail Specification for Low Power N-P-N, 20 V, 300 mW Switching Transistor of Assessed Quality, Ambient Rated, Hermetic Encapsulation
Organization: BSI
Year: 1978
Status: Inactive
BS EN 14059
Title:
Decorative oil lamps Safety requirements and test methods
Organization: BSI
Year: 2002
Status: Active
BS EN 100114-1
Title:
Rule of procedure 14 Quality assessment procedures Part 1. CECC requirements for the approval of an organization
Organization: BSI
Year: 1997
Status: Inactive
BS 6279-2
Title:
Storage of Cereals and Pulses - Part 2: Practical Recommendations
Organization: BSI
Year: 2001
Status: Active
BS 1913
Title:
Specification for Soft Soap
Organization: BSI
Year: 1990
Status: Active
BUPERS 12400.2
Title:
(OCPM-221) CIVILIAN PERSONNEL/ EQUAL EMPLOYMENT OPPORTUNITY CAREER DEVELOPMENT PROGRAM ROTATIONAL REQUIREMENTS OCPM
Organization: NAVY
Year: 1987
Status: Inactive
BS ISO 11861
Title:
Textile Floor Coverings - Coir Mats - Types and Specification
Organization: BSI
Year: 1999
Status: Active
BS EN 12475-3
Title:
Classification of Dense Shaped Refractory Products - Part 3: Basic Products Containing from 7% to 30% Residual Carbon
Organization: BSI
Year: 1998
Status: Inactive
BS 3224-1
Title:
Lighting Fittings for Civil Land Aerodromes Part 1: Lighting Units for Use in Precision Approach Path Indicator Systems
Organization: BSI
Year: 1988
Status: Active
BS 684-2.45
Title:
Methods of Analysis of Fats and Fatty Oils Part 2: Other Methods Section 2.45: Determination of Polar Compounds Content
Organization: BSI
Year: 1991
Status: Inactive
BS 2782-3 METH: 332A
Title:
Methods of testing Plastics - Part 3: Mechanical properties - Method 332A: Stiffness of plastics film
Organization: BSI
Year: 1976
Status: Inactive
BS EN ISO 3673-1
Title:
Plastics - Epoxy Resins Part 1: Designation
Organization: BSI
Year: 1997
Status: Active
BS EN 394
Title:
Lifejackets and Personal Buoyancy Aids - Additional Items
Organization: BSI
Year: 1994
Status: Inactive
BS EN 61243-2
Title:
Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.A.C
Organization: BSI
Year: 1998
Status: Active
BS EN 637
Title:
Plastics Piping Systems - Glass-Reinforced Plastics Components - Determination of the Amounts of Constituents Using the Gravimetric Method
Organization: BSI
Year: 1995
Status: Active
BS 5588-11
Title:
Fire precautions in the design, construction and use of buildings - Part 11: Code of practice for shops, offices, industrial, storage and other similar buildings
Organization: BSI
Year: 1997
Status: Inactive
BS 3095-1.1
Title:
Methods for Determination of the Freezing-Point Depression of Milk - Part 1: Method - Section 1.1: Thermistor Cryoscope Method
Organization: BSI
Year: 1988
Status: Inactive
BS ISO/IEC 14515-1
Title:
Information Technology - Portable Operating Systems Interface (POSIX) - Test Methods for Measuring Conformance to POSIX - Part 1: System Interfaces
Organization: BSI
Year: 2001
Status: Inactive
BS ISO 7766-1
Title:
Photography - Processing Wastes - Analysis of Cyanides Part 1: Determination of Hexacyanoferrate (II) and Hexacyanoferrate (III) by Spectrometry
Organization: BSI
Year: 1996
Status: Inactive
BS 4794-2.2
Title:
Control Switches (Switching Devices, Including Contactor Relays, for Control and Auxiliary Circuits for Voltages up to and Including 1000 V a.c. and 1200 V d.c. Part 2: Special Requirements for Spe...
Organization: BSI
Year: 1977
Status: Inactive
BS ISO/IEC ISP 12059-1
Title:
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions - Part 1. Object Management
Organization: BSI
Year: 1997
Status: Inactive
BS 903-A59
Title:
Physical Testing of Rubber Part A59: Methods Using Plastimeters
Organization: BSI
Year: 1990
Status: Inactive
BS 3900-D7
Title:
Methods of Test for Paints Group D: Optical Tests on Paint Films Part D7: Determination of Hiding Power of White and Light-Coloured Paints by the Kubelka- Munk Method
Organization: BSI
Year: 1983
Status: Inactive
BS EN ISP 12062-3
Title:
Information Technology - International Standardized Profiles AMH2n - Message Handling Systems - Interpersonal Messaging Part 3: AMH22 - IPM Requirements for Message Transfer (P1)
Organization: BSI
Year: 1996
Status: Active
BS EN ISO 13920
Title:
Welding - General Tolerances for Welded Constructions - Dimensions for Lengths and Angles - Shape and Position
Organization: BSI
Year: 1997
Status: Active
BS EN 13199-1
Title:
Packaging - Small Loading Carrier Systems - Part 1: Common Requirements and Test Methods
Organization: BSI
Year: 2000
Status: Active
BS EN 60819-3-2
Title:
Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Hybrid Inorganic-Organic Paper
Organization: BSI
Year: 2002
Status: Active
BS 6068-4.5
Title:
Water Quality - Part 4: Microbiological Methods - Section 4.5: Method for the Enumeration of Viable Micro-Organisms: Colony Count by Inoculation in or on a Nutrient Agar Culture Medium
Organization: BSI
Year: 1989
Status: Inactive
BS DD CEN/TS 14425-5
Title:
Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method
Organization: BSI
Year: 2005
Status: Inactive
BS 1896
Title:
Specification for Sizes of reprographic papers
Organization: BSI
Year: 1972
Status: Inactive
BS 9430-F0888 T0 F0901
Title:
Electronic Components of Assessed Quality Detail Specification in Accordance with BS 9400:1970
Organization: BSI
Year: 1988
Status: Inactive
BS ISO 3627
Title:
Photography - Processing chemicals - Specifications for anhydrous sodium metabisulfite
Organization: BSI
Year: 2002
Status: Active
BS 2L 504
Title:
Sheet and Strip of Magnesium-3 Per Cent Zinc-Zirconium Alloy
Organization: BSI
Year: 1973
Status: Inactive
BS EN 1946-5
Title:
Thermal Performance of Building Products and Components - Specific Criteria for the Assessment of Laboratories Measuring Heat Transfer Properties - Part 5: Measurements by Pipe Test Methods
Organization: BSI
Year: 2000
Status: Active
BS EN 3155-042
Title:
Aerospace series - Electrical contacts used in elements of connection - Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P - Product standard
Organization: BSI
Year: 2006
Status: Active
BS EN 45510-8-1
Title:
Guide for Procurement of Power Station Equipment - Part 8-1: Control and Instrumentation
Organization: BSI
Year: 1998
Status: Active
BS ISO 8116-6
Title:
Textile Machinery and Accessories - Beams for Winding Part 6: Beams for Ribbon Weaving and Ribbon Knitting - Terminology and Main Dimensions
Organization: BSI
Year: 1993
Status: Inactive
BS ISO/IEC TR 14143-4
Title:
Information technology Software measurement Functional size measurement Part 4: Reference model
Organization: BSI
Year: 2002
Status: Active
BS 6367
Title:
Drainage of Roofs and Paved Areas
Organization: BSI
Year: 1983
Status: Inactive
BS EN 1546-2
Title:
Identification Card Systems - Inter-Sector Electronic Purse - Part 2: Security Architecture
Organization: BSI
Year: 2000
Status: Active
BS 6057-3.5
Title:
Rubber Latices - Part 3: Methods of Test - Section 3.5: Determination of KOH Number of Natural Rubber Latices
Organization: BSI
Year: 1996
Status: Inactive
BS 6571-8
Title:
Vehicle Parking Control Equipment Part 8. Specification for Pre-Purchased Parking Vouchers
Organization: BSI
Year: 1997
Status: Active
BS 4787-1
Title:
Internal and external wood doorsets, door leaves and frames - Part 1: Specification for dimensional requirements
Organization: BSI
Year: 1980
Status: Active
BS 5804
Title:
Method of Visual Classification for Muscovite Mica Blocks, Thins and Films
Organization: BSI
Year: 1979
Status: Inactive
BS ISO 9831
Title:
Animal Feeding Stuffs, Animal Products, and Faeces or Urine - Determination of Gross Calorific Value - Bomb Calorimeter Method
Organization: BSI
Year: 1998
Status: Inactive
BS EN 61076-4-114
Title:
Connectors for electronic equipment Part 4-114: Printed board connectors Detail specification for two-part connector with integrated shielding function having a grid of 1 mm x 1,5 mm
Organization: BSI
Year: 2003
Status: Active
BS 6001-7
Title:
Acceptance sampling procedures by attributes Part 7: Accept-zero sampling system based on credit principle for controlling outgoing quality
Organization: BSI
Year: 2006
Status: Inactive
BS 3827-1
Title:
Glossary of Terms Relating to Builders' Hardware Part 1: Locks (Including Locks and Latches in One Case)
Organization: BSI
Status: Inactive
BS 5050
Title:
Methods of Test for Cryolite
Organization: BSI
Year: 1974
Status: Active
BS DD CEN/TS 15443
Title:
Solid recovered fuels - Methods for laboratory sample preparation
Organization: BSI
Year: 2007
Status: Inactive
BS 1101
Title:
Specification for Pressure Containers for Paint and Other Similar Substances
Organization: BSI
Year: 1977
Status: Inactive
BS EN ISO 2114
Title:
Plastics (Polyester Resins) and Paints and Varnishes (Binders) - Determination of Partial Acid Value and Total Acid Value
Organization: BSI
Year: 2000
Status: Active
BS 5724-2.22
Title:
Medical Electrical Equipment Part 2: Particular Requirements for Safety Section 2.22: General Operating Tables
Organization: BSI
Year: 1987
Status: Active
BS 6033
Title:
Specification for Colour Code for Identification of the Constituent Material of Ropes and Cordage
Organization: BSI
Year: 1981
Status: Inactive
BS EN 1231
Title:
Workplace Atmospheres - Short Term Detector Tube Measurement Systems - Requirements and Test Methods
Organization: BSI
Year: 1997
Status: Inactive
BS A 335
Title:
Nuts, Anchor, Self-Locking, Fixed, Closed Corner, Reduced Series, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius, 1 100 MPa (at Ambient...
Organization: BSI
Year: 1999
Status: Active
BS 2000-168
Title:
Determination of rolling bearing performance of lubricating grease
Organization: BSI
Year: 1993
Status: Inactive
BS 7016-9
Title:
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems Part 9: Control and Monitoring Systems
Organization: BSI
Year: 1997
Status: Inactive
BS ISO/IEC 13886
Title:
Information Technology - Language Independent Procedure Calling (LIPC)
Organization: BSI
Year: 1997
Status: Active
BS L 113
Title:
Specification for sheet and strip of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)
Organization: BSI
Year: 1971
Status: Inactive
BS 4479-6
Title:
Design of Articles That Are to Be Coated Part 6: Recommendations for Hot-Dip Metal Coatings
Organization: BSI
Year: 1990
Status: Inactive
BUPERS 1710.5
Title:
(NMPC-111/PERS -721) NAVY RECREATION SAILING PROGRAM NMPC
Organization: NAVY
Year: 1983
Status: Inactive
BS 6664-3
Title:
Flashpoint of Petroleum and Related Products Part 3: Method of Test for Flash/No Flash (Rapid Equilibrium Method)
Organization: BSI
Year: 1986
Status: Inactive
BS EN 14477
Title:
Packaging Flexible packaging material Determination of puncture resistance Test methods
Organization: BSI
Year: 2006
Status: Active
BS 1413
Title:
Specification for Page Sizes for Books
Organization: BSI
Year: 1989
Status: Active
BS EN 45510-4-4
Title:
Guide for the Procurement of Power Station Equipment - Part 4-4: Boiler Auxiliaries - Fuel Preparation Equipment
Organization: BSI
Year: 2002
Status: Active
BS 2F 127
Title:
Specification for Nylon Fabrics Suitable for Coating with Natural or Synthetic Elastomers for Aerospace Purposes
Organization: BSI
Year: 1991
Status: Active
BS 2782-8 METH: 821A
Title:
Methods of Testing Plastics - Part 8: Other Properties - Method 821A: Determination of the Gas Transmission Rate of Films and Thin Sheets under Atmospheric Pressure (Manometric Method)
Organization: BSI
Year: 1979
Status: Inactive
BS ISO 10716
Title:
Paper and board - Determination of alkali reserve
Organization: BSI
Year: 1995
Status: Active
BS PD CR 12471
Title:
Screening tests for nickel release from alloys and coatings in items that come into direct and prolonged contact with the skin
Organization: BSI
Year: 2002
Status: Active
BS EN 2374
Title:
Glass fibre reinforcing mouldings and sandwich composites - Production of test panels
Organization: BSI
Year: 1991
Status: Active
BS EN 171000
Title:
Harmonized System of Quality Assessment for Electronic Components - Generic Specification: Filters Using Waveguide Type Dielectric Resonators
Organization: BSI
Year: 2001
Status: Inactive
BS ISO 8114
Title:
Textile Machinery and Accessories - Spindles for Ring-Spinning and Doubling Machines - List of Equivalent Terms
Organization: BSI
Year: 1993
Status: Active
BS 5479-2
Title:
Duplicators and Document Copying Machines Part 2: Minimum Overprint and Attachment Features of Stencils for Duplicators
Organization: BSI
Year: 1977
Status: Active
BS EN ISO 5620-2
Title:
Shipbuilding and Marine Structures - Filling Connection for Drinking Water Tanks Part 2: Components
Organization: BSI
Year: 1997
Status: Active
BS CECC 75301
Title:
Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Interim Example. Detail specification/blank detail specification: rectangular connec...
Organization: BSI
Year: 1992
Status: Active
BS EN 13149-1
Title:
Public transport Road vehicle scheduling and control systems Part 1: WORLDFIP definition and application rules for onboard data transmission
Organization: BSI
Year: 2004
Status: Active
BS 9733
Title:
Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval
Organization: BSI
Year: 1985
Status: Active
BS 6100-4.2
Title:
Glossary of Building and Civil Engineering Terms Part 4: Forest Products Section 4.2: Sizes and Quantities of Solid Timber
Organization: BSI
Year: 1984
Status: Inactive
BS EN 61754-21
Title:
Fibre optic connector interfaces - Part 21: Type SMI connector family for plastic optical fibre
Organization: BSI
Year: 2005
Status: Active
BS 1902-2.3
Title:
Methods for Testing Refractory Materials Part 2: Chemical Analysis (Wet Methods) Section 2.3: Chemical Analysis of Magnesites and Dolomites
Organization: BSI
Year: 1970
Status: Inactive
BS ISO 17852
Title:
Water quality Determination of mercury Method using a combined preservation and digestion step followed by atomic fluorescence spectrometry
Organization: BSI
Year: 2006
Status: Inactive
BS TA 41
Title:
Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 N/mmu2) (limiting ruling section over 25 mm up to and including 75 mm)
Organization: BSI
Year: 1971
Status: Inactive
BS EN 143004
Title:
Specification for Harmonized system of quality assessment for electronic components - Blank detail specification: directly heated negative temperature coefficient thermistors (Rod type)
Organization: BSI
Year: 1984
Status: Active
BS 7455-2
Title:
Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry Part 2: Method for the Determination of Cobalt
Organization: BSI
Year: 1991
Status: Inactive
BS EN 124
Title:
Gully Tops and Manhole Tops for Vehicular and Pedestrian Areas - Design Requirements, Type Testing, Marking, Quality Control
Organization: BSI
Year: 1994
Status: Inactive
BS 3868
Title:
Specification for Prefabricated Drainage Stack Units in Galvanized Steel
Organization: BSI
Year: 1995
Status: Active
BS 227
Title:
Specification for H-Section Steel Arches for Use in Mines
Organization: BSI
Year: 1995
Status: Active
BS EN 2926
Title:
Bolts, Double Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Steel FE-PA92HT (A286), Silver Plated - Classification: 900 MPa (at Ambient Temperature)/650 Degrees C
Organization: BSI
Year: 1996
Status: Active
BS EN 50377-10-2
Title:
Connectors sets and interconnect components to be used in optical fibre communication systems Product specifications Part 10-2: MU/APC singlemode terminated on IEC 60793-2 category B1 fibre
Organization: BSI
Year: 2006
Status: Active
BS EN 12509
Title:
Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content
Organization: BSI
Year: 2002
Status: Inactive
BS EN 61229
Title:
Rigid protective covers for live working on a.c. installations
Organization: BSI
Year: 1996
Status: Active
BS 6245-3
Title:
Sampling Tobacco and Tobacco Products Part 3: Methods of Sampling Cigarettes
Organization: BSI
Year: 1992
Status: Inactive
BS EN 14182
Title:
Packaging Terminology Basic terms and definitions
Organization: BSI
Year: 2002
Status: Active
BS ISO 14520-5
Title:
Gaseous fire-extinguishing systems Physical properties and system design Part 5: FK-5-1-12 extinguishant
Organization: BSI
Year: 2006
Status: Inactive
BS EN 726-5
Title:
Identification Card Systems - Telecommunications Integrated Circuit(s) Cards and Terminals - Part 5: Payment Methods
Organization: BSI
Year: 1999
Status: Active
BS 6068-2.5
Title:
Water Quality Part 2: Physical, Chemical and Bio-Chemical Methods Section 2.5: Determination of Total Mercury of Flameless Atomic Absorption Spectrometry: Method After Pretreatment with Ultraviolet...
Organization: BSI
Year: 1984
Status: Active
BS EN 2349-201
Title:
Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection
Organization: BSI
Year: 2007
Status: Active
BS EN 60442
Title:
Electric Toasters for Household and Similar Purposes - Methods for Measuring the Performance
Organization: BSI
Year: 1999
Status: Active
BS 4064
Title:
Specification for Plain setting rings for use with internal diameter measuring machines - Metric units
Organization: BSI
Status: Active
BS EN 13742-1
Title:
Irrigation techniques - Solid set sprinkler systems - Part 1: Selection, design, planning and installation
Organization: BSI
Year: 2004
Status: Active
BS 5192-3
Title:
Guide to Production Control - Part 3: Ordering Methods
Organization: BSI
Year: 1993
Status: Active
BS 9133
Title:
Rules for the Preparation of Detail Specifications for Single Turn Low Power Rotary Potentiometers of Assessed Quality
Organization: BSI
Year: 1973
Status: Active
BS ISO 16000-1
Title:
Indoor air Part 1: General aspects of sampling strategy
Organization: BSI
Year: 2005
Status: Inactive
BS 6911-14
Title:
Testing Earth-Moving Machinery - Part 14: Crawler Machines - Performance Requirements and Test Procedures for Braking Systems
Organization: BSI
Year: 1998
Status: Inactive
BS EN 61325
Title:
Insulators for Overhead Lines with a Nominal Voltage above 1 000 V - Ceramic or Glass Insulator Units for D.C. Systems - Definitions, Test Methods and Acceptance Criteria
Organization: BSI
Year: 1996
Status: Active
BS EN 571-1
Title:
Non-Destructive Testing - Penetrant Testing Part 1: General Principles
Organization: BSI
Year: 1997
Status: Inactive
BS ISO 8486-1
Title:
Bonded Abrasives - Determination and Designation of Grain Size Distribution - Part 1: Macrogrits F4 to F220
Organization: BSI
Year: 1997
Status: Active
BS ISO 13555-2
Title:
Diesel engines Procedure for checking the dynamic timing of diesel fuel injection equipment Part 2: Test method
Organization: BSI
Year: 2003
Status: Inactive
BS 5367
Title:
Dimensions of Coated Abrasives
Organization: BSI
Year: 1976
Status: Inactive
BS DD ENV 13321-1
Title:
Data Communication for HVAC Application Automation Net - Part 1: BACnet, Profibus, World FIP
Organization: BSI
Year: 1999
Status: Inactive
BS 5770-2
Title:
Steel Strip Intended for the Manufacture of Springs Part 2. Specification for Cold Rolled Carbon and Low Alloy Steel
Organization: BSI
Year: 1981
Status: Inactive
BS EN 480-12
Title:
Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures
Organization: BSI
Year: 2005
Status: Active
BS 123400-003
Title:
System of Quality Assessment - Capability Detail Specification - Flexible Single-Sided and Double-Sided Printed Boards without Through-Connections
Organization: BSI
Year: 2001
Status: Active
BS 5293-4
Title:
Sampling and Testing Carbon Black for Use in the Rubber Industry Part 4: Method for Determination of Pellet Size Distribution
Organization: BSI
Year: 1996
Status: Inactive
BS 1658
Title:
Specification for Housings for Hydraulic Seals for Reciprocating Applications
Organization: BSI
Year: 1970
Status: Inactive
BS EN 61523-1
Title:
Delay and Power Calculation Standards - Part 1: Integrated Circuit Delay and Power Calculation Systems
Organization: BSI
Year: 2002
Status: Active
BS 2782-1 METH: 143A & B
Title:
Methods of Testing Plastics Part 1: Thermal Properties Method 143A & B: Determination of Flammability Temperature of Materials
Organization: BSI
Year: 1989
Status: Inactive
BS 5488
Title:
Specification for Small-Screen Monochrome Television Receivers for Use in Schools
Organization: BSI
Year: 1977
Status: Inactive
BS EN 29453
Title:
Soft Solder Alloys - Chemical Compositions and Forms
Organization: BSI
Year: 1994
Status: Inactive
BS EN ISO 5402
Title:
Leather Physical and mechanical tests Determination of flex resistance by flexometer method
Organization: BSI
Year: 2003
Status: Inactive
BS EN 10327
Title:
Continuously hot-dip coated strip and sheet of low carbon steels for cold forming Technical delivery conditions
Organization: BSI
Year: 2004
Status: Inactive
BS 1441
Title:
Galvanized Steel Wire for Armouring Submarine Cables
Organization: BSI
Status: Inactive
BS EN ISO 10066
Title:
Flexible Cellular Polymeric Materials - Determination of Creep in Compression
Organization: BSI
Year: 1998
Status: Active
BS EN 2591-416
Title:
Elements of Electrical and Optical Connection - Test Methods - Part 416: Contact Bending Strength
Organization: BSI
Year: 2001
Status: Active
BS 5600-3.7
Title:
Powder Metallurgical Materials and Products Part 3: Methods of Testing Sintered Metal Materials and Products, Excluding Hardmetals Section 3.7: Tensile Test Pieces
Organization: BSI
Year: 1988
Status: Inactive
BS ISO/IEC 10181-3
Title:
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Access Control Framework
Organization: BSI
Year: 1997
Status: Active
BS EN 60617-2
Title:
Graphical Symbols for Diagrams Part 2: Symbol Elements, Qualifying Symbols and Other Symbols Having General Application
Organization: BSI
Year: 1996
Status: Active
BS EN 1225
Title:
Plastics Piping Systems - Glass-Reinforced Thermosetting Plastics (GRP) Pipes - Determination of the Creep Factor under Wet Conditions and Calculation of the Long-Term Specific Ring Stiffness
Organization: BSI
Year: 1996
Status: Inactive
BS EN 2130
Title:
Bearings, Precision Ball in Corrosion Resisting Steel for Instruments and Equipment - Technical Specification
Organization: BSI
Year: 2001
Status: Active
BS 7724
Title:
Specification for Split pins (metric series)
Organization: BSI
Year: 1994
Status: Inactive
BS 3102
Title:
Brass Eyelets and Washers for General Purposes
Organization: BSI
Status: Inactive
BS ISO 4190-2
Title:
Lift (US: Elevator) installation - Part 2: Class IV lifts
Organization: BSI
Year: 2002
Status: Active
BS PD ISO/IEC TR 10032
Title:
Information technology Reference Model of Data Management
Organization: BSI
Year: 2004
Status: Active
BS ISO 14910-2
Title:
Plastics - Thermoplastic Polyester/Ester and Polyether/Ester Elastomers for Moulding and Extrusion - Part 2: Preparation of Test Specimens and Determination of Properties
Organization: BSI
Year: 1998
Status: Inactive
BS DD 175
Title:
Code of Practice for the Identification of Potentially Contaminated Land and Its Investigation
Organization: BSI
Year: 1988
Status: Inactive
BS 7283
Title:
Requirements and Application Guide for Thermal-Links
Organization: BSI
Year: 1990
Status: Inactive
BS EN 60427
Title:
Synthetic Testing of High-Voltage Alternating Current Circuit-Breakers
Organization: BSI
Year: 2001
Status: Inactive
BS EN 13863-1
Title:
Concrete pavements - Part 1: Test method for the determination of the thickness of a concrete pavement by survey method
Organization: BSI
Year: 2003
Status: Active
BS 9562-F0001
Title:
Electronic Components of Assessed Quality : Detail Specification in Accordance with BS 9562
Organization: BSI
Year: 1981
Status: Inactive
BS PD 6520
Title:
Guide to Fire test Methods for Building Materials and Elements of Construction
Organization: BSI
Year: 1988
Status: Active
BS EN ISO 3262-11
Title:
Extenders for Paints - Specifications and Methods of Test - Part 11: Natural Talc, in Lamellar Form, Containing Carbonates
Organization: BSI
Year: 2000
Status: Active
BS 5140
Title:
Specification for Pewter
Organization: BSI
Year: 1974
Status: Inactive
BS 7568-33
Title:
Press Tools Part 33: Wear Plates for Press Dies, Type B
Organization: BSI
Year: 1993
Status: Inactive
BS DD CEN/TS 15149-3
Title:
Solid biofuels Methods for the determination of particle size distribution Part 3: Rotary screen method
Organization: BSI
Year: 2006
Status: Inactive
BS ISO 13473-3
Title:
Characterization of pavement texture by use of surface profiles - Part 3: Specification and classification of profilometers
Organization: BSI
Year: 2002
Status: Active
BS DD 86-3
Title:
Damp-proof courses Part 3: Guide to characteristic strengths of damp-proof course material used in masonry
Organization: BSI
Year: 1990
Status: Inactive
BS 1000C
Title:
Guide to the Universal Decimal Classification (UDC)
Organization: BSI
Status: Inactive
BS 5350-C1
Title:
Methods of Test for Adhesives - Part C1: Determination of Cleavage Strength of Adhesive Bonds
Organization: BSI
Year: 1986
Status: Active
BS EN 14340
Title:
Leather Physical and mechanical tests Determination of water repellency of garment leather
Organization: BSI
Year: 2004
Status: Inactive
BS DD CEN/TS 13130-22
Title:
Materials and articles in contact with foodstuffs Plastics substances subject to limitation Part 22: Determination of ethylene oxide and propylene oxide in plastics
Organization: BSI
Year: 2005
Status: Active
BS ISO 10303-47
Title:
Industrial automation systems and integration - Product data representation and exchange - Part 47: Integrated generic resource: Shape variation tolerances
Organization: BSI
Year: 1998
Status: Active
BS 7494-2
Title:
Performance and Testing of Teleprotection Equipment of Power Systems Part 2: Analogue Comparison System
Organization: BSI
Year: 1993
Status: Active
BS 6279-1
Title:
Storage of Cereals and Pulses Part 1: Guide to Particular Problems Encountered in the Storage of Cereals and Pulses
Organization: BSI
Year: 1982
Status: Inactive
BS EN 2591-409
Title:
Elements of Electrical and Optical Connection - Test Methods - Part 409: Contact Retention in Insert
Organization: BSI
Year: 1999
Status: Active
BS AU 50-1.1.1B
Title:
Tyres and wheels - Part 1: Tyres - Section 1: Car tyres - Subsection 1.1b Specification for metric series tyres
Organization: BSI
Year: 1996
Status: Inactive
BS ISO/IEC 10181-5
Title:
Information Technology - Open Systems Interconnection - Security Frameworks for Open Systems: Confidentiality Framework
Organization: BSI
Year: 1997
Status: Active
BS DD ENV 13459-3
Title:
Road Marking Materials - Quality Control - Part 3: Performance in Use
Organization: BSI
Year: 1999
Status: Inactive
BS 638-8
Title:
Arc Welding Power Sources, Equipment and Accessories Pt 8: Electrode Holders and Handheld Torches and Guns for MIG, MAG and TIG Welding
Organization: BSI
Year: 1984
Status: Inactive
BS EN 975-2
Title:
Sawn timber - Appearance grading of hardwoods - Part 2: Poplars
Organization: BSI
Year: 2006
Status: Active
BS 1931
Title:
Method for the determination of length of woven or knitted fabrics when relaxed at zero tension
Organization: BSI
Status: Inactive
BS IEC 62142
Title:
Verilogr register transfer level synthesis
Organization: BSI
Year: 2005
Status: Inactive
BS 4285-1.1
Title:
Microbiological Examination for Dairy Purposes Part 1: Guide to General Procedures Section 1.1: Sampling and Preparation of Samples
Organization: BSI
Year: 1991
Status: Inactive
BS EN ISO 15252-3
Title:
Plastics - Epoxy Powder Moulding Compounds (EP-PMCs) - Part 3: Requirements for Selected Moulding Compounds
Organization: BSI
Year: 2000
Status: Active
BS 5692
Title:
Measurement of the Dimensions of a Cylindrical Electronic Component Having Two Axial Terminations
Organization: BSI
Year: 1978
Status: Inactive
BS ISO 11907-4
Title:
Plastics - Smoke Generation - Determination of the Corrosivity of Fire Effluents - Part 4: Dynamic Decomposition Method Using a Conical Radiant Heater
Organization: BSI
Year: 1998
Status: Active
BS G 257-2
Title:
Design of Electromagnetic Hazard Protection of Civil Aircraft - Part 2: Guide to Protection
Organization: BSI
Year: 1998
Status: Active
BS 3970-5
Title:
Sterilizing and disinfecting equipment for medical products - Part 5: Specification for low temperature steam disinfectors
Organization: BSI
Year: 1990
Status: Inactive
BS 4584-102.14
Title:
Metal-Clad Base Materials for Printed Wiring Boards Part 102: Copper-Clad Base Materials Section 102.14: Specification for Phenolic Cellulose Paper Copper-Clad Laminated Sheet of Defined Flammabili...
Organization: BSI
Year: 1990
Status: Inactive
BS 7767
Title:
Assessing the short-circuit withstand strength of partially type-tested assemblies (PTTA)
Organization: BSI
Year: 1994
Status: Active
BS TA 50
Title:
Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 N/mmu2) (limiting ruling section over 100 mm up to and including 150 mm)
Organization: BSI
Year: 1973
Status: Inactive
BS 6200-3.18.3
Title:
Sampling and Analysis of Iron, Steel and Other Ferrous Metals Part 3: Methods of Analysis Section 3.18: Determination of Manganese Subsection 3.18.3: Ferromanganese & Ferrosilicomanganese: Potentio...
Organization: BSI
Year: 1985
Status: Active
BS 3693A
Title:
Recommendations for the Design of Scales and Indexes: Part A: Recommended Form of Digits for Use on Dials and Scales
Organization: BSI
Status: Inactive
BS 1728-11
Title:
Method for The determination of silicon in aluminium and aluminium alloys (Perchloric acid method) - Methods for the analysis of aluminiumand aluminium alloys
Organization: BSI
Status: Active
BS 700-1
Title:
Graduated Pipettes - Part 1: Specification for general requirements
Organization: BSI
Year: 1982
Status: Inactive
BS 7825-3.11
Title:
Calibration of Rubber and Plastics Test Equipment - Part 3: Calibration Schedules - Section 3.11 Rubber Polymer Identification and Chemical Properties
Organization: BSI
Year: 1998
Status: Inactive
BS EN 12877-4
Title:
Colouring Materials in Plastics - Determination of Colour Stability to Heat During Processing of Colouring Materials in Plastics - Part 4: Determination by Two-Roll Milling
Organization: BSI
Year: 2000
Status: Active
BS 5550-5.1.2
Title:
Cinematography - Part 5: Common to more than one film gauge - Section 5.1 Raw stock - Subsection 5.1.2 Specification for the minimum information for the labelling of containers for raw stock motion...
Organization: BSI
Year: 1993
Status: Active
BS ISO 6107-1
Title:
Water quality - Vocabulary - Part 1
Organization: BSI
Year: 2004
Status: Active
BS 5194-4
Title:
Surgical instruments - Part 4: Specification for scissors, shears and other jointed cutting instruments
Organization: BSI
Year: 1986
Status: Active
BS ISO 16387
Title:
Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction and survival
Organization: BSI
Year: 2004
Status: Inactive
BS 2000-218
Title:
Calculation of cetane index of diesel fuels (range 55 and above)
Organization: BSI
Year: 1984
Status: Inactive
BS 3680-4A
Title:
Measurement of Liquid Flow in Open Channels Part 4A: Method Using Thin-Plate Weirs
Organization: BSI
Year: 1981
Status: Inactive
BS 3262-2
Title:
Hot-Applied Thermoplastic Road Marking Materials - Part 2: Specification for Road Performance
Organization: BSI
Year: 1999
Status: Inactive
BS 7821-4
Title:
Three Phase Oil- Three Phase Oil-Immersed Distribution Transform- ers, 50 Hz from 50 to 2500 kVA with Highest Voltage for Equipment not Exceeding 36 kV Part 4: Determination of the Power Rating of ...
Organization: BSI
Year: 1995
Status: Inactive
BS EN ISO 4613-1
Title:
Plastics - Ethylene/Vinyl Acetate (E/VAC) Moulding and Extrusion Materials - Part 1: Designation and Specification
Organization: BSI
Year: 1999
Status: Inactive
BS 6100-1.3.2
Title:
Glossary of Building and civil engineering terms - Part 1: General and miscellaneous - Section 1.3 Parts of construction works - Subsection 1.3.2 Roofs and roofing
Organization: BSI
Year: 1990
Status: Inactive
BS EN 28233
Title:
Thermoplastics Valves - Torque - Test Method
Organization: BSI
Year: 1992
Status: Active
BS EN ISO 604
Title:
Plastics Determination of compressive properties
Organization: BSI
Year: 2003
Status: Active
BS EN ISO 11213
Title:
Modified Starch - Determination of Acetyl Content - Enzymatic Method
Organization: BSI
Year: 1995
Status: Active
BS EN 344
Title:
Safety, Protective and Occupational Footwear for Professional Use Part 1: Requirements and Test Methods
Organization: BSI
Year: 1993
Status: Inactive
BS 6443
Title:
Penetrant Flaw Detection
Organization: BSI
Year: 1984
Status: Inactive
BS AU 179
Title:
Dimensional Codes for Passenger Cars
Organization: BSI
Year: 1981
Status: Inactive
BS 7079-0
Title:
Preparation of Steel Substrates Before Application of Paints and Related Products Part 0: Introduction
Organization: BSI
Year: 1990
Status: Inactive
BS 5075-3
Title:
Concrete Admixtures - Part 3: Superplasticizing Admixtures
Organization: BSI
Year: 1985
Status: Inactive
BS 5463
Title:
Specification for A.C. Switches of Rated Voltage Above 1 kV
Organization: BSI
Year: 1977
Status: Inactive
BS 3221-1
Title:
Medicine measures - Part 1: Specification for medicine measures of 50 mL total graduated capacity
Organization: BSI
Year: 1985
Status: Active
BS DD CLC/TS 50131-3
Title:
Alarm systems Intrusion systems Part 3: Control and indicating equipment
Organization: BSI
Year: 2003
Status: Inactive
BS 3767
Title:
Low Pressure Sodium Vapour Lamps
Organization: BSI
Year: 1990
Status: Inactive
BS EN 375
Title:
Information Supplied by the Manufacturer with in Vitro Diagnostic Reagents for Professional Use
Organization: BSI
Year: 2001
Status: Inactive
BS 6356-8
Title:
Spraying Equipment for Crop Protection - Part 8: Specification for Induction Hoppers
Organization: BSI
Year: 1996
Status: Active
BS EN 753-3
Title:
Identification Card Systems - Intersector Thin Flexible Cards - Part 3: Test Methods
Organization: BSI
Year: 1999
Status: Inactive
BS CP 312-3
Title:
Code of practice for plastics pipework (thermoplastics material) - Part 3: Polyethylene pipes for the conveyance of liquids under pressure
Organization: BSI
Year: 1973
Status: Inactive
BS 5501-3
Title:
Electrical Apparatus for Potentially Explosive Atmospheres Part 3: Pressurized Apparatus 'p'
Organization: BSI
Year: 1977
Status: Inactive
BUMED 5910.3A
Title:
(BUMED-M09B1) SPACE MANAGEMENT PROGRAM
Organization: NAVY
Year: 2005
Status: Active
BS DD ENV 12169
Title:
Criteria for the Assessment of Conformity of a Lot of Sawn Timber
Organization: BSI
Year: 2000
Status: Inactive
BS 1813
Title:
Specification for Dimensions of Conduit Dies, Diestocks and Guides
Organization: BSI
Year: 1974
Status: Active
BS 7016-7
Title:
Reciprocating Internal Combustion Engines - Vocabulary of Components and Systems - Part 7: Governing Systems
Organization: BSI
Year: 1999
Status: Inactive
BS EN 803
Title:
Plastics Piping Systems - Injection-Moulded Thermoplastics Fittings for Elastic Sealing Ring Type Joints for Pressure Piping - Test Methods for Resistance to a Short-Term Internal Pressure without ...
Organization: BSI
Year: 1995
Status: Active
BS 6600-1
Title:
Outline Dimensions of Transformers and Inductors for Use in Telecommunication and Electronic Equipment - Part 1: Specification for the Outline Dimensions of Transformers and Inductors Using YEI-1 L...
Organization: BSI
Year: 1987
Status: Active
BS EN 61966-3
Title:
Multimedia Systems and Equipment - Colour Measurement and Management - Part 3: Equipment Using Cathode Ray Tubes
Organization: BSI
Year: 2000
Status: Active
BS EN ISO 15236-4
Title:
Steel cord conveyor belts - Part 4: Vulcanized belt joints
Organization: BSI
Year: 2004
Status: Active
BS 5741
Title:
Pressure Regulators Used in Welding, Cutting and Related Processes
Organization: BSI
Year: 1979
Status: Inactive
BS 4514
Title:
Unplasticized PVC Soil and Ventilating Pipes of 82.4 mm Minimum Mean Outside Diameter, and Fittings and Accessories of 82.4 mm and of Other Sizes - Specification
Organization: BSI
Year: 2001
Status: Active
BS 1113 ENQ CASE 2
Title:
Enquiry Case 2: Use of ASTM A105, A106, A182, A234, A335, and A312 Materials
Organization: BSI
Year: 1992
Status: Inactive
BN-97-3-4
Title:
Inhibited Ethylene and Propylene Glycols for Corrosion and Freeze Protection in Water-Based HVAC Systems
Organization: ASHRAE
Year: 1997
Status: Inactive
BS 3456-202.37
Title:
Specification for Safety of Household and Similar Electrical Appliances - Part 202: Particular Requirements - Section 202.37: Commercial Electric Deep Fat Fryers
Organization: BSI
Year: 1990
Status: Inactive
BS 7870-8.6
Title:
LV and MV polymeric insulated cables for use by distribution and generation utilities - Part 8: Specification for multicore and multipair cables for installation above and below ground - Section 8....
Organization: BSI
Year: 2003
Status: Active
BS 7655-2.3
Title:
Specification for Insulating and Sheathing Materials for Cables - Part 2: Cross-Linked Elastomeric Sheathing Compounds - Section 2.3 General Application
Organization: BSI
Year: 2000
Status: Active
BS EN ISO 10695
Title:
Water Quality - Determination of Selected Organic Nitrogen and Phosphorus Compounds - Gas Chromatographic Methods
Organization: BSI
Year: 2000
Status: Active
BS 5551-3.6
Title:
Fertilizers Part 3 Physical Properties Section 3.6 Method for Determination of Static Angle of Repose of Solid Fertilizers
Organization: BSI
Year: 1990
Status: Inactive
BS EN 12573-3
Title:
Welded Static Non-Pressurized Thermoplastic Tanks - Part 3: Design and Calculation for Single Skin Rectangular Tanks
Organization: BSI
Year: 2000
Status: Active
BS 1000(682/683)
Title:
Universal Decimal Classification (UDC). English Full Edition (682/683): Smithery. Farriery. Hand-Forged Ironwork. Ironmongery. Hardware. Locksmithing. Gunsmithing. Bottling. Lamps. Stoves
Organization: BSI
Year: 1973
Status: Inactive
BS ISO 14654
Title:
Epoxy-Coated Steel for the Reinforcement of Concrete
Organization: BSI
Year: 2000
Status: Active
BS A 361
Title:
Rivets, Solid, 100 Degree Normal Countersunk Head, in Metallic Material, with or without Surface Treatment - Dimensions
Organization: BSI
Year: 2000
Status: Active
BS PD CEN/TR 14922
Title:
Portable fire extinguishers Model laboratory Report in compliance with EN 3-7
Organization: BSI
Year: 2005
Status: Active
BS 4781-1
Title:
Specification for Self-Adhesive Plastics Labels for Permanent Use Part 1: General Purpose Labels
Organization: BSI
Year: 1973
Status: Inactive
BS 2000-226
Title:
Methods of test for petroleum and its products - BS 2000-226: Petroleum products - Calculation of viscosity index from kinematic viscosity
Organization: BSI
Year: 2003
Status: Active
BS 799-4
Title:
Oil burning equipment - Part 4: Specification for atomizing burners (other than monobloc type) together with associated equipment for single burner and multi burner installations
Organization: BSI
Year: 1992
Status: Active
BS 690-2
Title:
Asbestos-cement slates and sheets - Part 2: Specification for asbestos-cement and cellulose-asbestos-cement flat sheets
Organization: BSI
Year: 1981
Status: Inactive
BS EN 61027
Title:
Instruments for the Measurement of Aural Acoustic Impedance/Admittance
Organization: BSI
Year: 1993
Status: Inactive
BS ISO 5725-6
Title:
Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
Organization: BSI
Year: 1995
Status: Active
BS AU 193A
Title:
Specification for Replacement motor cycle and moped exhaust systems
Organization: BSI
Year: 1990
Status: Active
BS AU 227
Title:
Dimensions of Cylindrical Shaft Ends and Hubs for Alterations for Commercial Vehicles and Buses
Organization: BSI
Year: 1988
Status: Inactive
BS 4215-3
Title:
Resistance spot welding electrodes, electrode holders and ancillary equipment Part 3. Specification for the dimensions of electrode taper fits
Organization: BSI
Year: 1987
Status: Inactive
BS 6723
Title:
Guide to Establishment and Development of Multilingual Thesauri
Organization: BSI
Year: 1985
Status: Inactive
BS ISO 2911
Title:
Sweetened condensed milk - Determination of sucrose content - Polarimetric method
Organization: BSI
Year: 2004
Status: Active
BS G 248
Title:
Hybrid Remote Power Controllers. General Requirements
Organization: BSI
Year: 1993
Status: Active
BS EN 13657
Title:
Characterization of waste Digestion for subsequent determination of aqua regia soluble portion of elements
Organization: BSI
Year: 2002
Status: Active
BS EN 82045-1
Title:
Document Management Part 1: Principles and Methods
Organization: BSI
Year: 2001
Status: Active
BS 7944
Title:
Type 1 Heavy Duty Fire Blankets and Type 2 Heavy Duty Heat Protective Blankets
Organization: BSI
Year: 1999
Status: Active
BS EN 13920-12
Title:
Aluminium and aluminium alloys Scrap Part 12: Turnings consisting of one single alloy
Organization: BSI
Year: 2003
Status: Active
BS EN 2310
Title:
Test Methods for the Flame Resistance Rating of Non-Metallic Materials
Organization: BSI
Year: 1991
Status: Active
BS EN 1376
Title:
Foodstuffs - Determination of Saccharin in Table Top Sweetner Preparations - Spectrometric Method
Organization: BSI
Year: 1997
Status: Active
BS EN ISO 15614-5
Title:
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys
Organization: BSI
Year: 2004
Status: Active
BS EN 2591-405
Title:
Elements of Electrical and Optical Connection - Test Methods - Part 405: Axial Load
Organization: BSI
Year: 1998
Status: Active
BS 3881
Title:
Safety Requirements for Carry Cots. Carry Cot Stands and Carry Cot Transporters
Organization: BSI
Year: 1986
Status: Inactive
BS EN 12272-3
Title:
Surface dressing Test method Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method
Organization: BSI
Year: 2003
Status: Active
BS DD 238-7.2
Title:
Fieldbus Part 7: Fieldbus Management Section 7.2: Specification for Network Management
Organization: BSI
Year: 1996
Status: Inactive
BS 9300 C155-168
Title:
Detail Requirements for Silicon Voltage-Regulator Diodes
Organization: BSI
Year: 1971
Status: Inactive
BS EN 133201
Title:
Blank Detail Specification: Passive Filter Units for Electromagnetic Interference Suppression - Filters for Which Safety Tests are Required
Organization: BSI
Year: 1998
Status: Inactive
BS 2TA 5
Title:
Specification for Forgings of Commercially Pure Titanium (Tensile Strength 390-540 N/mm2)
Organization: BSI
Year: 1973
Status: Inactive
BS ISO 12353-2
Title:
Road vehicles Traffic accident analysis Part 2: Guidelines for the use of impact severity measures
Organization: BSI
Year: 2003
Status: Active
BUMED 12410.3
Title:
(BUMED-00CP) UPWARD MOBILITY PROGRAM
Organization: NAVY
Year: 1995
Status: Active
BS 6425-1
Title:
Methods of test for Gases Evolved During Combustion of Electric Cables - Part 1: Method for Determination of Amount of Halogen Acid Gas Evolved During Combustion of Polymeric Materials Taken from C...
Organization: BSI
Year: 1990
Status: Inactive
BS 1140
Title:
Resistance Spot Welding of Uncoated and Coated Low Carbon Steel
Organization: BSI
Year: 1993
Status: Active
BS 2T 66
Title:
Specification for 18/10 Chromium-Nickel Corrosion-Resisting Steel Tube (Niobium Stabilized: 550 MPa) (Weldable)
Organization: BSI
Year: 1980
Status: Active
BS ISO 1919
Title:
Road Vehicles - M14 X 1,25 Spark Plugs with Flat Seating and Their Cylinder Head Housings
Organization: BSI
Year: 1998
Status: Inactive
BS EN 12901
Title:
Products Used for Treatment of Water Intended for Human Consumption - Inorganic Supporting and Filtering Materials - Definitions
Organization: BSI
Year: 1999
Status: Active
BS QC 300401
Title:
Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polyethylene tere...
Organization: BSI
Year: 1984
Status: Inactive
BS EN 61967-5
Title:
Integrated circuits Measurement of electromagnetic emissions, 150 kHz to 1 GHz Part 5: Measurement of conducted emissions Workbench Faraday Cage method
Organization: BSI
Year: 2003
Status: Active
BS 89-7
Title:
Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Specification for special requirements for multi-function instruments
Organization: BSI
Year: 1990
Status: Inactive
BS 7527-2.3
Title:
Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 2.3: Air pressure
Organization: BSI
Year: 1991
Status: Inactive
BS DD ENV 12834
Title:
Road Transport and Traffic Telematics (RTTT) - Dedicated Short-Range Communications (DSRC) - Application Layer
Organization: BSI
Year: 1998
Status: Inactive
BS 2A 122-124
Title:
Specification for Clinch nuts (Unified threads) for aircraft
Organization: BSI
Year: 1981
Status: Active
BS 3101
Title:
Specification for Control and Interlock Circuits Primarily Associated with Flameproof Restrained Plugs and Sockets for Use in Coal Mines
Organization: BSI
Year: 1986
Status: Active
BS 2G 114
Title:
Specification for Direct current ratiometer indicators for aircraft
Organization: BSI
Status: Active
BS PP 7320
Title:
Construction Drawing Practice for Schools
Organization: BSI
Year: 1988
Status: Active
BS 6043-2.9
Title:
Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Part 2.9: Electrode coke - Determination of particle size distribution
Organization: BSI
Year: 2000
Status: Inactive
BS DD ENV 1999-2
Title:
Eurocode 9: Design of Aluminium Structures - Part 2: Structures Susceptible to Fatigue
Organization: BSI
Year: 2000
Status: Inactive
BS EN 1170-1
Title:
Precast Concrete Products - Test Method for Glass-Fibre Reinforced Cement Part 1: Measuring the Consistency of the Matrix - 'Slump Test' Method
Organization: BSI
Year: 1998
Status: Active
BS 6491-1
Title:
Electro-sensitive safety systems for industrial machines - Part 1: Specification for general requirements
Organization: BSI
Year: 1984
Status: Inactive
BS PD CEN/TR 14715
Title:
Safety of machinery Ionizing radiation emitted by machinery Guidance for the application of technical standards in the design of machinery in order to comply with legislative requirements
Organization: BSI
Year: 2004
Status: Active