TS EN 60512-14-4
Title: Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14f: Immersion-Waterproof
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 4684
Title: Leather - Chemical tests - Determination of volatile matter
Organization: TSE
Year: 2009
Status: Active
TS EN ISO 17700
Title: Footwear - Test methods for uppers, linings and insocks - Colour fastness to rubbing
Organization: TSE
Year: 2010
Status: Active
TS 12820/T1
Title: Petrol filling stations - Safety requirements
Organization: TSE
Year: 2007
Status: Active
TS ISO 16844-7
Title: Road vehicles - Tachograph systems - Part 7: Parameters
Organization: TSE
Year: 2012
Status: Active
TS EN 61970-1
Title: Energy management system application program interface (EMS-API) - Part 1: Guidelines and general requirements
Organization: TSE
Year: 2006
Status: Active
TS ISO 5985
Title: Animal feeding stuffs - Determination of ash insoluble in hydrochloric acid
Organization: TSE
Year: 2009
Status: Active
TS EN 14647
Title: Calcium aluminate cement - Composition, specifications and conformity criteria
Organization: TSE
Year: 2010
Status: Active
TS EN 14847
Title: Aerosol containers - Tinplate containers - Dimensions of the 25, 4 mm aperture
Organization: TSE
Year: 2008
Status: Active
TS EN 3841-405
Title: Aerospace series - Circuit breakers - Test methods - Part 405: Fluid resistance
Organization: TSE
Year: 2006
Status: Active
TS 6343
Title: Determination of salts in crude oil by electrometric and potentiometric methods
Organization: TSE
Year: 2010
Status: Active
TS EN ISO 4545-3
Title: Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks
Organization: TSE
Year: 2007
Status: Active
TS EN 2328
Title: Aerospace series - Washers, tab in corrosion resisting steel, cadmium plated for flight control rods - Dimensions
Organization: TSE
Year: 2006
Status: Active
TS 4096
Title: Nuts - With octogonal and hexagonal metric and whitworth threads
Organization: TSE
Year: 2013
Status: Active
TS EN 12441-8
Title: Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc; Flame atomic absorption spectrometric method
Organization: TSE
Year: 2006
Status: Active
TS EN 3155-042
Title: Aerospace series - Electrical contacts used in elements of connection - Part 042: Contacts, electrical, triaxial, size 08, male 042, type D, solder, class P - Product standard
Organization: TSE
Year: 2006
Status: Active
TS EN 14767
Title: LPG equipment and accessories - Transportable refillable composite cylinders for Liquefied Petroleum Gases (LPG) ? Periodic Inspections
Organization: TSE
Year: 2007
Status: Inactive
TS EN 60789
Title: Medical electrical equipment - Characteristics and test conditions of radionuclide imaging devices - Anger type gamma cameras
Organization: TSE
Year: 2007
Status: Inactive
TSE CEN/TS 13126-9
Title: Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges
Organization: TSE
Year: 2006
Status: Inactive
TS EN 3646-003
Title: Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 003: Receptacle, square flange mounting - Product standard
Organization: TSE
Year: 2006
Status: Active
TS EN 14532-3
Title: Welding consumables - Test methods and quality requirements - Part 3: Conformity assessment of wire electrodes, wires and rods for welding of aluminium alloys
Organization: TSE
Year: 2006
Status: Active
TS EN 3716-002
Title: Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards
Organization: TSE
Year: 2006
Status: Active
TS 13320
Title: Work places - Providing services about media monitoring / follow up- General rules
Organization: TSE
Year: 2007
Status: Active
TS EN 771-5/A1
Title: Specification for masonry units - Part 5: Manufactured stone masonry units
Organization: TSE
Year: 2007
Status: Inactive
TS 2259
Title: Beer
Organization: TSE
Year: 2012
Status: Active
TS 61-8
Title: Screw threads - ISO general purpose, metric - Part 8: Nominal sizes for 2 mm fine pitch threads - Nominal diameters from 17 mm to 300 mm
Organization: TSE
Year: 2016
Status: Active
TS ISO 1995
Title: Aromatic hydrocarbons; Sampling
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 8502-6
Title: Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The...
Organization: TSE
Year: 2006
Status: Active
TS 7116
Title: Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography
Organization: TSE
Year: 2010
Status: Active
TS EN ISO 19958
Title: Footwear - Test methods for heels and top pieces - Top piece retention strength
Organization: TSE
Year: 2011
Status: Active
TS ISO 16844-4
Title: Road vehicles - Tachograph systems - Part 4: CAN interface
Organization: TSE
Year: 2012
Status: Active
TS ISO 2325
Title: Coke; Size analysis (Nominal top size 20 mm or less)
Organization: TSE
Year: 2006
Status: Active
TS 10581
Title: Meatball-Uncooked
Organization: TSE
Year: 2007
Status: Active
TS ISO 4664-1
Title: Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guidance
Organization: TSE
Year: 2006
Status: Active
TS EN 12300/A1
Title: Cryogenic vessels - Cleanliness for cryogenic service
Organization: TSE
Year: 2006
Status: Active
TS EN 1332-5
Title: Identification card systems - Man-machine interface - Part 5: Raised tactile symbols for differenciation of application on ID-1 cards
Organization: TSE
Year: 2006
Status: Active
TS 10670/T2
Title: Pipe work ? Corrugated stainless steel hose and hose assemblies (up to 1,6 MPa) ? For gas appliances
Organization: TSE
Year: 2007
Status: Active
TS 13354
Title: Work places- Collection and transportation services of medical wastes- General rules
Organization: TSE
Year: 2008
Status: Active
TS EN 14340
Title: Leather - Physical and mechanical tests - Determination of water repellency of garment leather
Organization: TSE
Year: 2010
Status: Inactive
TS EN 3155-023
Title: Aerospace series - Electrical contacts used in elements of connection - Part 023: Contacts, electrical rectangular, female, type A, crimp, class R - Product standard
Organization: TSE
Year: 2006
Status: Active
TS EN 13084-4/AC
Title: Free-standing chimneys - Part 4: Brick liners - Design and execution
Organization: TSE
Year: 2006
Status: Active
TS ISO 2020-1
Title: Aerospace - Preformed flexible steel wire rope for aircraft controls - Part 1: Dimensions and loads
Organization: TSE
Year: 2006
Status: Active
TS ISO 7481
Title: Aerospace - Nuts, self-locking, with maximum operating temperature less than or equal to 425 ?C - Test methods
Organization: TSE
Year: 2006
Status: Active
TS ISO 7784-1/T1
Title: Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-covered wheel method
Organization: TSE
Year: 2006
Status: Inactive
TS EN 3708-004
Title: Aerospace series - Modular interconnection systems - Terminal junction systems - Part 004: Removable feedback modules version, unsealed - Product standard
Organization: TSE
Year: 2006
Status: Active
TS EN 12818/A1
Title: LPG Equipment and accessories - Inspection and requalification of LPG tanks up to and including 13 m3 underground
Organization: TSE
Year: 2009
Status: Inactive
TS ISO 14680-2/T1
Title: Paints and varnishes - Determination of pigment content - Part 2: Ashing method
Organization: TSE
Year: 2006
Status: Active
TS EN 4174
Title: Aerospace series - Collars, swage locking, sheartype, in aluminium alloy 2024, anodized or chromated, metric series
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 7391-2
Title: Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
Organization: TSE
Year: 2006
Status: Active
TS EN 772-16/A1
Title: Methods of test for masonry units - Part 16: Determination of dimensions
Organization: TSE
Year: 2006
Status: Inactive
TS EN 725-8
Title: Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density
Organization: TSE
Year: 2006
Status: Inactive
TS EN ISO 14663-2
Title: Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 15023-1
Title: Plastics - Poly(vinyl alcohol) (PVAL) materials - Part 1: Designation system and basis for specifications
Organization: TSE
Year: 2006
Status: Active
TS EN 12094-5
Title: Fixed firefighting systems - Components for gas extinguishing systems - Part 5: Requirements and test methods for high and low pressure selector valves and their actuators
Organization: TSE
Year: 2006
Status: Active
TS EN 2714-008
Title: Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 ?C and 260 ?C - Part 008: Screened (braided) and jacketed, UV laser printable ...
Organization: TSE
Year: 2006
Status: Active
TS EN 15086
Title: Foodstuffs - Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs
Organization: TSE
Year: 2006
Status: Active
TS EN 3646-007
Title: Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 007: Receptacle, hermetic, round flange, welding or brazing mountin...
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 16000-2
Title: Indoor air - Part 2: Sampling strategy for formaldehyde
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 14044
Title: Environmental management ? Life cycle assessment ? Requirements and guidelines
Organization: TSE
Year: 2007
Status: Active
TS EN 4529-003
Title: Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard
Organization: TSE
Year: 2006
Status: Active
TS EN 3727
Title: Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification
Organization: TSE
Year: 2006
Status: Active
TS EN 9132
Title: Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking
Organization: TSE
Year: 2006
Status: Active
TS EN 4056-001
Title: Aerospace series - Cable ties for harnesses - Part 001: Technical specification
Organization: TSE
Year: 2006
Status: Active
TS EN 14562
Title: Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements ...
Organization: TSE
Year: 2006
Status: Active
TS EN 4508
Title: Aerospace series - Paints and varnishes - Test method for anti slip coatings - Determination of the sliding friction behaviour
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 14819-6
Title: Traffic and Traveller Information (TTI) - TTI messages via traffic message coding - Part 6: Encryption and conditional access for the Radio Data System - Traffic Message Channel ALERT C coding
Organization: TSE
Year: 2006
Status: Active
TS 10390
Title: Sweater-Woolen (For military use)
Organization: TSE
Year: 2009
Status: Active
TS EN ISO 6144
Title: Gas analysis - Preparation of calibration gas mixtures - Static volumetric method
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 11064-7
Title: Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres
Organization: TSE
Year: 2006
Status: Active
TS EN 12517-1
Title: Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
Organization: TSE
Year: 2006
Status: Inactive
TS EN 13200-5
Title: Spectator facilities - Part 5: Telescopic stands
Organization: TSE
Year: 2006
Status: Active
TS EN 62329-1
Title: Heat shrinkable moulded shapes - Part 1: Definitions and general requirements
Organization: TSE
Year: 2006
Status: Active
TS EN 60384-19-1
Title: Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment lev...
Organization: TSE
Year: 2006
Status: Active
TS EN 60455-3-5
Title: Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 9073-11
Title: extiles - Test methods for nonwovens - Part 11: Run-off
Organization: TSE
Year: 2006
Status: Active
TS EN 13433
Title: Devices to prevent pollution by backflow of potable water - Mechanical disconnector, direct actuated - Family G, type A
Organization: TSE
Year: 2006
Status: Inactive
TS EN 60464-3-1/A1
Title: Varnishes used for electrical insulation - Part 3: Specifications for individual materials - Sheet 1: Ambient curing finishing varnishes
Organization: TSE
Year: 2006
Status: Active
TS EN 12502-5
Title: Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unall...
Organization: TSE
Year: 2006
Status: Active
TS EN 60512-14-6
Title: Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
Organization: TSE
Year: 2006
Status: Active
TS EN 14936-2
Title: Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method
Organization: TSE
Year: 2006
Status: Active
TSE CEN/TS 13126-17
Title: Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 17: Fittings for tilt and slide systems
Organization: TSE
Year: 2006
Status: Inactive
TS EN 14904
Title: Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification
Organization: TSE
Year: 2006
Status: Active
TS EN 15159-1
Title: Vitreous and porcelain enamels - Glass lined apparatus for process plants - Part 1: Quality requirements for apparatus, components, appliances and accessories
Organization: TSE
Year: 2006
Status: Inactive
TS EN 62132-4
Title: Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method
Organization: TSE
Year: 2006
Status: Active
TS EN 3841-302
Title: Aerospace series - Circuit breakers - Test methods - Part 302: Insulation resistance
Organization: TSE
Year: 2006
Status: Active
TS EN 3841-502
Title: Aerospace series - Circuit breakers - Test methods - Part 502: Operating forces
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 22088-3
Title: Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 3: Bent strip method
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 16137
Title: Industrial valves - Check valves of thermoplastics materials
Organization: TSE
Year: 2006
Status: Active
TS EN 12502-1
Title: Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General
Organization: TSE
Year: 2006
Status: Active
TS 13082
Title: Work places - Consultancy services for service sector ?General rules
Organization: TSE
Year: 2008
Status: Inactive
TS ISO 727-1
Title: Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure -- Part ...
Organization: TSE
Year: 2006
Status: Active
TS EN 300386 V 1.3.3
Title: Electromangnetic compatibility and Radio spectrum Matters (ERM) - Telecommunication network equipment - ElectroMagnetic Compatibility (EMC) requirements - Part 2: Product family standard
Organization: TSE
Year: 2006
Status: Inactive
TS 9690
Title: Textile products - Shirts
Organization: TSE
Year: 2013
Status: Active
TS EN 302326-2 V1.1.2
Title: Fixed Radio Systems;Multipoint Equipment and Antennas;Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment
Organization: TSE
Year: 2006
Status: Inactive
TS EN 60684-3-409
Title: Flexible insulating sleeving - Part 3: Specification for individual types of sleeving - Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating
Organization: TSE
Year: 2006
Status: Active
TS ISO 6145-1
Title: Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration
Organization: TSE
Year: 2006
Status: Inactive
TS 13509
Title: Landscape terminology and definition
Organization: TSE
Year: 2012
Status: Active
TS EN 10219-1
Title: Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions
Organization: TSE
Year: 2008
Status: Active
TS EN 13481-4/A1
Title: Railway applications - Track - Performance requirements for fastening systems - Part 4: Fastening systems for steel sleepers
Organization: TSE
Year: 2007
Status: Inactive
TS EN 61755-1
Title: Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance
Organization: TSE
Year: 2006
Status: Active
TS ISO 4022/T1
Title: Permeable sintered metal materials - Determination of fluid permeability
Organization: TSE
Year: 2006
Status: Active
TS ISO 4665
Title: Rubber, vulcanized or thermoplastic - Resistance to weathering
Organization: TSE
Year: 2006
Status: Active
TS EN 3841-401
Title: Aerospace series - Circuit breakers - Test methods - Part 401: Sand and dust
Organization: TSE
Year: 2006
Status: Active
TS ISO 5982
Title: Mechanical vibration and shock -- Range of idealized values to characterize seated-body biodynamic response under vertical vibration
Organization: TSE
Year: 2006
Status: Active
TS ISO 5243
Title: Textile machinery and accessories - Numbering of heald frames and drop wire bars in a loom
Organization: TSE
Year: 2006
Status: Inactive
TS EN 3841-507
Title: Aerospace series - Circuit breakers - Test methods - Part 507: Mechanical shocks
Organization: TSE
Year: 2006
Status: Active
TS EN 143/A1
Title: Respiratory protective devices - Particle filters - Requirements, testing, marking
Organization: TSE
Year: 2006
Status: Active
TS EN 927-6
Title: Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
Organization: TSE
Year: 2006
Status: Active
TS ISO 3191
Title: Aerospace - Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 ?C, 1100 MPa (at ambient temper...
Organization: TSE
Year: 2006
Status: Active
TS ISO 1232
Title: Aluminium oxide primarily used for the production of aluminium; Determination of silica content; Reduced molybdosilicate spectrophotometric method
Organization: TSE
Year: 2007
Status: Active
TS EN 2713-008
Title: Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 ?C and 200 ?C - Part 008: Screened (braided) and jacketed, UV laser printable ...
Organization: TSE
Year: 2006
Status: Active
TS ISO 806
Title: Aluminium oxide primarily used for the production of aluminium - Determination of loss of mass at 300 ?C and 1000 ?C
Organization: TSE
Year: 2007
Status: Active
TS ISO 8257-2/T1
Title: Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
Organization: TSE
Year: 2006
Status: Active
TS EN 301489-25 V2.3.2
Title: Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;Part 25: Specific conditions for CDMA 1x spread spectrum...
Organization: TSE
Year: 2006
Status: Active
TS EN 2995-005
Title: Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 3834-4
Title: Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements
Organization: TSE
Year: 2007
Status: Active
TS EN 60454-3-2
Title: Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber ther...
Organization: TSE
Year: 2007
Status: Active
TS 8400
Title: Work places - Buffets - General rules
Organization: TSE
Year: 2009
Status: Active
TS EN 3155-027/AC
Title: Aerospace series - Electrical contacts used in elements of connection - Part 027: Contacts, electrical, female, type A, crimp, class R - Product standard
Organization: TSE
Year: 2006
Status: Active
TS EN 3545-006
Title: Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 ?C to 175 ?C - Part 006: Male coding and attac...
Organization: TSE
Year: 2006
Status: Active
TS ISO 3105
Title: Glass capillary kinematic viscometers - Specifications and operating instructions
Organization: TSE
Year: 2007
Status: Active
TS ISO 4656-1
Title: Rubber compounding ingredients; carbon black; determination of dibutyl phthalate absorption number; part 1: method using absorptometer
Organization: TSE
Year: 2006
Status: Active
TS EN 10083-3
Title: Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 4259
Title: Petroleum products - Determination and application of precision data in relation to methods of test
Organization: TSE
Year: 2006
Status: Active
TS EN 60352-2
Title: Solderless connections - Part 2: Solderless crimped connections - General requirements, test methods and practical guidance
Organization: TSE
Year: 2006
Status: Active
TS EN 4608-001
Title: Aerospace series - Cable, electrical, for signal transmission - Part 002: General
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 2884-1
Title: Paints and varnishes - Determination of viscosity using rotary viscometers - Part 1: Cone-and-plate viscometer operated at a high rate of shear
Organization: TSE
Year: 2006
Status: Active
TS 11643
Title: Work places - Drinkable water selling - General rules
Organization: TSE
Year: 2007
Status: Active
TS ISO 4229
Title: Assembly tools for screws and nuts ? Single-head engineer's wrenches for lower torque applications ? Maximum outside dimensions of heads and test torques
Organization: TSE
Year: 2013
Status: Active
TS EN ISO 19112
Title: Geographic information - Spatial referencing by geographic identifiers
Organization: TSE
Year: 2010
Status: Active
TS ISO 7137
Title: Aircraft - Environmental conditions and test procedures for airborne equipment
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 12137-2
Title: Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus
Organization: TSE
Year: 2006
Status: Inactive
TS EN 3155-022
Title: Aerospace series - Electrical contacts used in elements of connection - Part 022: Contacts, electrical rectangular, male, type A, crimp, class R - Product standard
Organization: TSE
Year: 2006
Status: Active
TS ISO 8279
Title: Aerospace - Nuts, hexagonal, plain, normal-height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 ?C, 600 MPa (at ambient temperature)/235 ?C, 900 MPa ...
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 19134
Title: Geographic information - Location based services - Multimodal routing and navigation
Organization: TSE
Year: 2016
Status: Active
TS EN 3427
Title: Aerospace series - Groove dimensions for radial mounting retaining rings
Organization: TSE
Year: 2006
Status: Active
TS 13549
Title: Cat food ?Granular shaped
Organization: TSE
Year: 2013
Status: Active
TS ISO 15181-1/T1
Title: Paints and varnishes - Determination of release rate of biocides from antifouling paints - Part 1: General method for extraction of biocides
Organization: TSE
Year: 2006
Status: Inactive
TS EN 4008-001
Title: Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 001: Technical specification
Organization: TSE
Year: 2006
Status: Active
TS 4324/T1
Title: Package Stability of Paint
Organization: TSE
Year: 2007
Status: Active
TS 8687
Title: Isocyanate raw materials used in the protiction of uretane foam- Determination of total chlorine content
Organization: TSE
Year: 1991
Status: Active
TS 1900-1/T1
Title: Methods of Testing Soils for Civil Engineering Purposes in the Laboratory Part 1 : Determination of physical proporties
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 1856
Title: Flexible cellular polymeric materials materials-Determination of compression set
Organization: TSE
Year: 2009
Status: Active
TS EN 4533-003
Title: Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices
Organization: TSE
Year: 2006
Status: Active
TS EN 14701-3
Title: Characterization of sludges - Filtration properties - Part 3: Determination of the compressibility
Organization: TSE
Year: 2006
Status: Active
TS EN ISO 11979-5
Title: Ophthalmic implants - Intraocular lenses - Part 5: Biocompatibility
Organization: TSE
Year: 2006
Status: Active
TS EN 14968
Title: Semantics for groundwater data interchange
Organization: TSE
Year: 2006
Status: Active
TS EN 15184
Title: Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
Organization: TSE
Year: 2006
Status: Active
TS EN 2713-011
Title: Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 ?C and 200 ?C - Part 011: Silver plated copper screened (spiral) and jacketed,...
Organization: TSE
Year: 2006
Status: Active
TS EN 50363-10-2
Title: Insulating, sheathing and covering materials for low-voltage energy cables Part 10 -2: Miscellaneous sheathing compounds ?Thermopl?stic polyurethane
Organization: TSE
Year: 2007
Status: Active
TS HD 22.10 S2
Title: Rubber insulated cables of rated voltages up to including 450/750 V Part 10: Epr insulated and polyuredhane sheathed flexible cable
Organization: TSE
Year: 2008
Status: Inactive
TS EN 3155-057
Title: Aerospace series - Electrical contacts used in elements of connection - Part 057: Contacts, electrical, female, thermocouple NiCr, type C, crimp, class T- Product standard
Organization: TSE
Year: 2006
Status: Active
TS HD 60364-7-740
Title: Electrical installations of buildings - Part 7-740: Requirements for special installations or locations - Temporary electrical installations for structures, amusement devices and booths at fairgro...
Organization: TSE
Year: 2006
Status: Active
TS EN 3660-001
Title: Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 001: Technical specification
Organization: TSE
Year: 2006
Status: Active
TS 13341
Title: Work Places ? Providig services about interpretership- General Rules
Organization: TSE
Year: 2008
Status: Active
TS EN 122001
Title: Blank detail specification: CECC military specification for radio frequency connectors [type MIL-C-39012]
Organization: TSE
Year: 2008
Status: Active
TS EN 4008-011
Title: Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 011: Positioner for crimping tool M22520/2-01 - Product standard
Organization: TSE
Year: 2006
Status: Active
TS EN 14940-2
Title: Copper and copper alloys - Determination of chromium content - Part 2: FAAS method
Organization: TSE
Year: 2006
Status: Active
TS 13510
Title: Pomegranate nectar
Organization: TSE
Year: 2012
Status: Active
TS EN ISO 6142
Title: Gas analysis - Preparation of calibration gas mixtures - Gravimetric method
Organization: TSE
Year: 2006
Status: Inactive
TS 579/T3
Title: Valves and Fittiings for Central Heating Radiators
Organization: TSE
Year: 2007
Status: Active
TS EN 15159-3
Title: Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 3: Thermal shock resistance
Organization: TSE
Year: 2006
Status: Inactive
TS EN 15434+A1
Title: Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
Organization: TSE
Year: 2012
Status: Active
TS 12853
Title: Authorized services for office and bokkeeping machines - Rules
Organization: TSE
Year: 2009
Status: Active
TS EN 120002
Title: Blank detail specification: infrared emitting diodes, infrared emitting diode arrays
Organization: TSE
Year: 2008
Status: Active
TS EN 60870-5-104
Title: Telecontrol equipment and systems - Part 5-104: Transmission protocols - Network access for IEC 60870-5-101 using standard transport profiles
Organization: TSE
Year: 2007
Status: Active
TS EN 294/AC
Title: Safety of machinery; safety distances to prevent danger zones being reached by the upper limbs
Organization: TSE
Year: 2007
Status: Inactive
TS EN 14735/AC
Title: Characterization of waste - Preparation of waste samples for ecotoxicity tests
Organization: TSE
Year: 2006
Status: Active
TS EN 61788-1
Title: Superconductivity -- Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors
Organization: TSE
Year: 2008
Status: Active
TS ISO 1617
Title: Aluminium oxide primarily used for the production of aluminium; Determination of sodium content; Flame emission spectrophotometric method
Organization: TSE
Year: 2007
Status: Active
TS EN 12809/AC
Title: Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Organization: TSE
Year: 2006
Status: Inactive
TS EN 14977
Title: Copper and copper alloys - Detection of tensile stress - 5 % ammonia test
Organization: TSE
Year: 2006
Status: Active
TS EN 2349-310
Title: Aerospace series - Requirements and test procedures for relays and contactors - Part 310: Rupture
Organization: TSE
Year: 2007
Status: Active
TS ISO 15242-2
Title: Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface
Organization: TSE
Year: 2009
Status: Active
TS EN 61788-9
Title: Superconductivity - Part 9: Measurement for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
Organization: TSE
Year: 2009
Status: Active
TS EN 15416-5
Title: Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time
Organization: TSE
Year: 2006
Status: Active
TS EN 12097
Title: Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems
Organization: TSE
Year: 2007
Status: Active
TS EN 50262/A2
Title: Metric cable glands for electrical installations
Organization: TSE
Year: 2007
Status: Inactive
TS HD 384.6.61 S2
Title: Electrical installations of buildings Part 6: Verification chapter 61: Initial verification
Organization: TSE
Year: 2007
Status: Inactive
TS 5886/T1
Title: Animal Feeds-Determination of Magnesium
Organization: TSE
Year: 2007
Status: Active
TS EN 14620-1
Title: Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 ?C and -165 ?C - Part ...
Organization: TSE
Year: 2007
Status: Active
TS EN 14931
Title: Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyperbaric therapy - Performance, safety requirements and testing
Organization: TSE
Year: 2006
Status: Active
TS ISO 1268-8
Title: Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC
Organization: TSE
Year: 2007
Status: Active
TSE ISO/TS 19103
Title: Geographic Information-Conceptual Schema Language
Organization: TSE
Year: 2008
Status: Active
TS 13378
Title: Windproof jacket for military use
Organization: TSE
Year: 2008
Status: Active
TS 491 EN 610/T1
Title: Tin and tin alloys - Ingot tin
Organization: TSE
Year: 2007
Status: Active
TS EN 60076-13
Title: Power transformers - Part 13: Self protected liquid filled transformers
Organization: TSE
Year: 2007
Status: Active
TS 5547/T1
Title: Animal Feedsstuffs - Determination of Calcium Content(Titration Method)
Organization: TSE
Year: 2007
Status: Active
TS EN 61537
Title: Cable management - Cable tray systems and cable ladder systems
Organization: TSE
Year: 2007
Status: Active
TS EN 13458-2/AC
Title: Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 14125
Title: Fibre-reinforced plastic composites - Determination of flexural properties
Organization: TSE
Year: 2010
Status: Active
TS EN ISO 8871-4
Title: Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 4: Biological requirements and test methods
Organization: TSE
Year: 2008
Status: Active
TS ISO 7902-1
Title: Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 1: Calculation procedure
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 12402-2
Title: Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements
Organization: TSE
Year: 2008
Status: Active
TS EN 61663-2
Title: Lightning protection ? elecommunication lines - Part 2: Lines using metallic conductors
Organization: TSE
Year: 2009
Status: Inactive
TS ISO 5435
Title: Rubber compounding ingredients - Carbon black - Determination of tinting strength
Organization: TSE
Year: 2007
Status: Active
TS 13420
Title: Antibacterial surfaced ceramic sanitary appliances - Specifications and test methods
Organization: TSE
Year: 2010
Status: Active
TS EN 60318-5
Title: Electroacustics - Simulators of human head and ear - Part 5: 2 cm3 coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
Organization: TSE
Year: 2012
Status: Active
TS EN 483/A2/AC
Title: Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 kW
Organization: TSE
Year: 2009
Status: Inactive
TS EN 500-3+A1
Title: Mobile road construction machinery - Safety - Part 3: Specific requirements for soil- stabilising machines and recycling machines
Organization: TSE
Year: 2011
Status: Active
TS EN 12809/A1/AC
Title: Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Organization: TSE
Year: 2009
Status: Active
TS ISO 15003
Title: Agricultural engineering ? Electrical and electronic equipment ? Testing resistance to environmental conditions
Organization: TSE
Year: 2008
Status: Active
TS ISO 356
Title: Essential oils - Preparation of test samples
Organization: TSE
Year: 2007
Status: Active
TS 13047/T
Title: Bitumlu ortuler - Egimli cati kaplama malzemeleri altinda kullanilan
Organization: TSE
Year: 2007
Status: Inactive
TS ISO 510
Title: Red lead for paints
Organization: TSE
Year: 2007
Status: Active
TS 5680/T
Title: Steel Strands for Prestressed Concrete
Organization: TSE
Year: 2007
Status: Inactive
TS EN ISO 8442-2/AC
Title: Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 2: Requirements for stainless steel and silver-plated cutlery
Organization: TSE
Year: 2016
Status: Active
TS EN 301449 V1.1.1
Title: Electromagnetic compatibility and Radio spectrum Matters (ERM);Harmonized EN for CDMA spread spectrum base stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR b...
Organization: TSE
Year: 2007
Status: Active
TS EN 14647/AC
Title: Calcium aluminate cement - Composition, specifications and conformity criteria
Organization: TSE
Year: 2010
Status: Active
TS 519 EN 1562/A1
Title: Founding - Malleable cast irons
Organization: TSE
Year: 2007
Status: Inactive
TS 5535/T
Title: Fireclay and semisilica refractory bricks-for Bbilers
Organization: TSE
Year: 2007
Status: Inactive
TS ISO 10110-3
Title: Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 3: Material imperfections - Bubbles and inclusions
Organization: TSE
Year: 2008
Status: Active
TS EN 335-2
Title: Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood
Organization: TSE
Year: 2008
Status: Active
TS 303/T2
Title: Milling Cutters (For Metals)
Organization: TSE
Year: 2007
Status: Inactive
TS EN 13229/AC
Title: Inset appliances including open fires fired by solid fuels - Requirements and test methods
Organization: TSE
Year: 2009
Status: Active
TS EN 50363-3
Title: Insulating, sheathing and covering materials for low-voltage energy cables Part -3: PVC insulating compounds
Organization: TSE
Year: 2007
Status: Active
TS EN 13938-1
Title: Explosives for civil uses - Propellants and rocket propellants - Part 1: Requirements
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 9905 /AC
Title: Technical specifications for centrifugal pumps - Class I
Organization: TSE
Year: 2007
Status: Active
TS EN 301 489-1 V1.6.1
Title: Electromagnetic compatibility and Radio spectrum Matters (ERM);ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;Part 1: Common technical requirements
Organization: TSE
Year: 2006
Status: Inactive
TS EN 13630-10
Title: Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords
Organization: TSE
Year: 2009
Status: Active
TS EN 2732
Title: Aerospace series - Magnesium alloy Mg-C46001 - T6 - Chill casting
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 3269/T1
Title: Fasteners ? Acceptance inspection
Organization: TSE
Year: 2007
Status: Active
TS EN 13631-11
Title: Explosives for civil uses - High explosives - Part 11: Determination of transmission of detonation
Organization: TSE
Year: 2009
Status: Active
TS 8684
Title: Register of following up for attendance (For in - Service training)
Organization: TSE
Year: 1991
Status: Inactive
TS EN 13938-5
Title: Explosives for civil uses - Propellants and rocket propellants - Part 5: Determination of voids and fissures
Organization: TSE
Year: 2008
Status: Active
TS EN 10244-2/T1
Title: Steel wire and wire products-Non-ferrous metallic contings on steel wire-Part 2:Zinc or zinc alloy contings on steel wire
Organization: TSE
Year: 2008
Status: Inactive
TS EN 60846
Title: Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation (IEC 60846:2002, modified) / Note: Endorsement no...
Organization: TSE
Year: 2009
Status: Inactive
TS EN 2997-006
Title: Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 ░C to 175 ░C continuous, 200 ░C co...
Organization: TSE
Year: 2007
Status: Active
TS ISO 8142
Title: Thermal insulation bonded preformed man-made mineral fibre pipe sections-specification
Organization: TSE
Year: 2009
Status: Active
TS EN 1011-4
Title: Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloys
Organization: TSE
Year: 2008
Status: Active
TS EN 61290-5-1
Title: Optical amplifiers - Test methods -- Part 5-1: Reflectance parameters - Optical spectrum analyzer method
Organization: TSE
Year: 2009
Status: Active
TS EN 12689
Title: Biotechnology - Guidance on assessment of the purity, biological activity and stability of microorganism based products
Organization: TSE
Year: 2011
Status: Active
TS EN 60749-8
Title: Semiconductor devices - Mechanical and climatic test methods - Part 8: Sealing
Organization: TSE
Year: 2008
Status: Active
TS EN 2349-305
Title: Aerospace series - Requirements and test procedures for relays and contactors - Part 305: Bounce time
Organization: TSE
Year: 2007
Status: Active
TS EN 180101
Title: Blank Detail Specification: Fixed fibre optic attenuators
Organization: TSE
Year: 2010
Status: Active
TS EN 2349-402
Title: Aerospace series - Requirements and test procedures for relays and contactors - Part 402: Corrosion, salt spray
Organization: TSE
Year: 2007
Status: Active
TS ISO 549
Title: Manganese ores; Determination of combined water content; Gravimetric method
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 8988
Title: Plastics - Phenolic resins - Determination of hexamethylenetetramine content - Kjeldahl method, perchloric acid method and hydrochloric acid method
Organization: TSE
Year: 2007
Status: Active
TS EN 1498
Title: Personal fall protection equipment - Rescue loops
Organization: TSE
Year: 2007
Status: Active
TS ISO 5667-5
Title: Water quality - Sampling - Part 5: Guidance on sampling of drinking water from treatment works and piped distribution systems
Organization: TSE
Year: 2008
Status: Active
TS EN 12641-2
Title: Swap bodies and commercial vehicles - Tarpaulins - Part 2: Minimum requirements for curtainsiders
Organization: TSE
Year: 2007
Status: Active
TS ISO 10110-10
Title: Optics and photonics - Preparation of drawings for optical elements and systems - Part 10: Table representing data of optic elements and cemented assemblies
Organization: TSE
Year: 2008
Status: Active
TS EN 14035-13
Title: Fireworks - Part 13: Flash pellets - Specification and test methods
Organization: TSE
Year: 2008
Status: Inactive
TS EN 62007-2
Title: Semiconductor optoelectronic devices for fibre optic system applications - Part 2: Measuring methods
Organization: TSE
Year: 2009
Status: Active
TS EN 14035-24
Title: Fireworks - Part 24: Novelty matches; Specification and test methods
Organization: TSE
Year: 2008
Status: Inactive
TS EN 2349-317
Title: Aerospace series - Requirements and test procedures for relays and contactors - Part 317: Service life of coil switching device
Organization: TSE
Year: 2007
Status: Active
TS EN 1317-1
Title: Road restraint systems - Part 1: Terminology and general criteria for test methods
Organization: TSE
Year: 2011
Status: Active
TS EN 15199-1
Title: Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 1: Middle distillates and lubricating base oils
Organization: TSE
Year: 2007
Status: Active
TS EN 284
Title: Swap bodies - Non-stackable swap bodies of class C - Dimensions and general requirements
Organization: TSE
Year: 2007
Status: Active
TS 4902 ISO 1704/T1
Title: Shipbuilding; stud-link anchor chains
Organization: TSE
Year: 2007
Status: Inactive
TS EN ISO 20079
Title: Water quality - Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) - Duckweed growth inhibition test
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 21227-2
Title: Paints and varnishes - Evaluation of defects on coated surfaces using optical imaging - Part 2: Evaluation procedure for multi- impact stone-chipping test
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 20623
Title: Petroleum and related products ? Determination of the extreme-pressure and anti-wear properties of fluids ? Four ball method (European conditions)
Organization: TSE
Year: 2010
Status: Active
TS EN 14620-5
Title: Design and manufacture of site built, vertical, cylindrical, flat-bottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 ?C and -165 ?C - Part ...
Organization: TSE
Year: 2007
Status: Active
TSE CEN ISO/TS 17892-8
Title: Geotechnical investigation and testing -Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO/TS 17892-8:2004)
Organization: TSE
Year: 2007
Status: Active
TS EN 15168
Title: Surface active agents - Determination of hydroxyl value - p-Toluensulfonyl isocyanate (TSI) method and potentiometric titration with tetrabutylammonium hydroxide
Organization: TSE
Year: 2007
Status: Active
TS EN 891
Title: Chemicals used for treatment of water intended for human consumption - Iron(III) chloride sulfate
Organization: TSE
Year: 2007
Status: Active
TS EN 1993-1-11
Title: Eurocode 3 - Design of steel structures - Part 1-11: Design of structures with tension components
Organization: TSE
Year: 2007
Status: Active
TS EN 2349-201
Title: Aerospace series - Requirements and test procedures for relays and contactors - Part 201: Visual inspection
Organization: TSE
Year: 2007
Status: Active
TS EN 50216-8/A1
Title: Power transformer and reactor fittings - Part 8: Butterfly valves for insulating liquid circuits
Organization: TSE
Year: 2007
Status: Active
TS EN 61290-11-2
Title: Optical amplifiers -Test methods - Part 11-2: Polarization mode dispersion - Poincar? sphere analysis method
Organization: TSE
Year: 2008
Status: Active
TS EN 3155-014
Title: Aerospace series - Electrical contacts used in elements of connection - Part 014: Contacts, electrical, male, type A, crimp, class S - Product standard
Organization: TSE
Year: 2007
Status: Active
TS IEC 60050-121
Title: International Electrotechnical Vocabulary ? Part 121: Electromagnetism
Organization: TSE
Year: 2010
Status: Active
TS EN 60371-3-6/A1
Title: Specification for insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 6: Glass-backed mica paper with a B-stage epoxy resin binder
Organization: TSE
Year: 2007
Status: Active
TS 9516
Title: Sodium Citrate- Food Grade
Organization: TSE
Year: 2009
Status: Active
TS EN 3476
Title: Aerospace series - Steel FE-PL1501 (30CrMo12) - Air melted - Softened - Forging stock - A or D <kleiner => 300 mm
Organization: TSE
Year: 2007
Status: Active
TS EN 61755-2-2
Title: Fibre optic connector optical interfaces - Part 2-2: Optical interface standard single mode angled physically contacting fibres
Organization: TSE
Year: 2007
Status: Active
TS 516/T
Title: Steel (Cast and Other) Gate Valves
Organization: TSE
Year: 2007
Status: Inactive
TS EN 14902/AC
Title: Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
Organization: TSE
Year: 2007
Status: Active
TS EN 3972
Title: Aerospace series - Steel FE-PL1507 (40CrMoV12) - Consumable electrode remelted - Hardened and tempered - Bar for machining - D<(Index)e> <kleiner => 50 mm, 1250 MPa <kleiner => R<(Index)m> <klei...
Organization: TSE
Year: 2007
Status: Active
TS 3505/T
Title: Precast Concrete Saddles for Concrete Flumes
Organization: TSE
Year: 2007
Status: Inactive
TS EN 4057-304
Title: Aerospace series - Cable ties for harnesses - Test methods - Part 304: Loop tensile strength at maximum working temperature
Organization: TSE
Year: 2007
Status: Active
TS 8657/T
Title: Varnishes - Phthalic Resin Based
Organization: TSE
Year: 2007
Status: Inactive
TS EN 1459/AC
Title: Safety of industrial trucks - Self-propelled variable reach trucks
Organization: TSE
Year: 2008
Status: Inactive
TS EN ISO 20567-2
Title: Paints and varnishes - Determination of stone-chip resistance of coatings - Part 2: Single-impact test with a guided impact body
Organization: TSE
Year: 2007
Status: Active
TS EN 4110
Title: Aerospace series - Wrenches, open end, box
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 16104
Title: Packaging-Transport packaging for clangerous goods-test methods
Organization: TSE
Year: 2007
Status: Inactive
TS 1290/T
Title: Steel Strips (Hot Rolled)
Organization: TSE
Year: 2007
Status: Inactive
TS 2747/T
Title: Urinals (Made of Ceramic)
Organization: TSE
Year: 2007
Status: Inactive
TS 13210
Title: Canned rosto- Ready to serve
Organization: TSE
Year: 2009
Status: Active
2006/28/EC/A2
Title: Commission Directive 2006/28/EC of 6 March 2006 amending, for the purposes of their adaptation to technical progress, Council Directive 72/245/EEC of 20 June 1972 relating to the radio interference...
Organization: TSE
Year: 2007
Status: Active
TS 655/T
Title: Paint for traffic signs
Organization: TSE
Year: 2007
Status: Inactive
TS EN ISO 6149-1
Title: Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O- ring sealing - Part 1: Ports with truncated housing for O-ring seal
Organization: TSE
Year: 2007
Status: Active
TS 3961
Title: Graphite - Determination of ash content
Organization: TSE
Year: 2009
Status: Active
TS EN 60793-1-48
Title: Optical fibres -- Part 1-48: Measurement methods and test procedures - Polarization mode dispersion
Organization: TSE
Year: 2010
Status: Active
TS 11650/T
Title: Paints-Phthalic resin based
Organization: TSE
Year: 2007
Status: Inactive
TS EN 12766-3/AC
Title: Petroleum products and used oils - Determination of PCBs and related products - Part 3: Determination and quantification of polychlorinated terphenyls (PCT) and polychlorinated benzyl toluenes (...
Organization: TSE
Year: 2007
Status: Active
TS 7035
Title: Work places - General rules for groceries
Organization: TSE
Year: 2012
Status: Active
TS EN 12430/A1
Title: Isi Yalitim products for building applications - Determination of behaviour under point load
Organization: TSE
Year: 2008
Status: Inactive
TS EN 15034
Title: Heating boilers - Condensing heating boilers for fuel oil
Organization: TSE
Year: 2009
Status: Active
TS ISO/IEC 10118-3
Title: Information technology - Security techniques - Hash-functions - Part 3: Dedicated hash-functions
Organization: TSE
Year: 2007
Status: Active
TS EN 14932
Title: Plastics - Stretch thermoplastic films for wrapping bales - Requirements and test methods
Organization: TSE
Year: 2007
Status: Active
TS 605/T
Title: Lavatory Basins (Made of Ceramic or Cast Iron)
Organization: TSE
Year: 2007
Status: Inactive
TS EN 61280-2-11
Title: Fibre optic communication subsystem test procedures -- Part 2-11: Digital systems - Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring
Organization: TSE
Year: 2011
Status: Active
TS 12724
Title: Fair organizing - Fair and their categories - Terms and definitions
Organization: TSE
Year: 2012
Status: Active
TS 3721/T
Title: Steel Wires for Prestressed Concrete
Organization: TSE
Year: 2007
Status: Inactive
TS EN 60027-2
Title: Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
Organization: TSE
Year: 2007
Status: Active
TS 8751/T
Title: Varnishes - Aminoalkyd resin based
Organization: TSE
Year: 2007
Status: Inactive
TS EN 112000
Title: Generic specification: image converter and image intensifier tubes
Organization: TSE
Year: 2008
Status: Active
TS 1026-76/T
Title: Fasteners-Hexagen Nuts-Section:76-Prevailing Torgue Type Hexagon Nuts (With Non-Metallic Insert), Style 2-Property Classes 9 and 12-Product Grades A and B
Organization: TSE
Year: 2007
Status: Inactive
TS EN 61000-4-12
Title: Electromagnetic compatibility (EMC) - Part 4-12: Testing and measuring techniques - Ring wave immunity test - Basic EMC publication
Organization: TSE
Year: 2007
Status: Active
TS EN 60749-31
Title: Semiconductor devices - Mechanical and climatic test methods - Part 31: Flammability of plastic-encapsulated devices (internally induced)
Organization: TSE
Year: 2008
Status: Active
TS 5984/T1
Title: Carrot Pickle
Organization: TSE
Year: 2010
Status: Active
TS EN 1634-1/AC
Title: Fire resistance tests for door and shutter assemblies - Part 1: Fire doors and shutters
Organization: TSE
Year: 2008
Status: Inactive
TS EN 60747-16-4
Title: Semiconductor devices - Part 16-4: Microwave integrated circuits - Switches
Organization: TSE
Year: 2008
Status: Active
TSE ECE R 7
Title: Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motor cycles) and their trailers
Organization: TSE
Year: 2008
Status: Inactive
TS EN 61754-7
Title: Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces -- Part 7: Type MPO connector family
Organization: TSE
Year: 2010
Status: Active
TS ISO/IEC 10118-1
Title: Information technology - Security techniques; Hash-functions - Part 1: General
Organization: TSE
Year: 2007
Status: Active
TS ISO/IEC 9796-3
Title: Information technology - Security techniques - Digital signature schemes giving message recovery - Part 3: Discrete logarithm based mechanisms
Organization: TSE
Year: 2007
Status: Active
TS 13485
Title: Lubricating oils, industrial oils and related products (Class L) - Group Y: Miscellaneous ? Process oils
Organization: TSE
Year: 2011
Status: Active
TS EN 61108-4
Title: Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Per...
Organization: TSE
Year: 2008
Status: Active
TS 13406
Title: Authorized services for hydraulic power units - Rules
Organization: TSE
Year: 2009
Status: Active
TS EN 165000-3
Title: Film and hybrid integrated circuits - Part 3: Self-audit checklist and report for film and hybrid integrated circuit manufacturers
Organization: TSE
Year: 2009
Status: Active
TS EN 14035-2/AC
Title: Firewoks - Part 2: Categorisation
Organization: TSE
Year: 2008
Status: Inactive
TS EN 60749-18
Title: Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose)
Organization: TSE
Year: 2008
Status: Active
TS EN 1744-6
Title: Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
Organization: TSE
Year: 2008
Status: Active
TS EN 10130
Title: Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Organization: TSE
Year: 2008
Status: Active
TS EN 14035-20
Title: Fireworks - Part 20: Jumping crackers - Specification and test methods
Organization: TSE
Year: 2008
Status: Inactive
TS EN 1800
Title: Transportable gas cylinders - Acetylene cylinders - Basic requirements, definitions and type testing
Organization: TSE
Year: 2009
Status: Inactive
TSE CEN ISO/TS 17892-12
Title: Geotechnical investigation and testing -Laboratory testing of soil - Part 12: Determination of Atterberg limits (ISO/TS 17892-12:2004)
Organization: TSE
Year: 2007
Status: Active
TS EN 1093-3+A1
Title: Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant
Organization: TSE
Year: 2009
Status: Active
TS EN 114000
Title: Generic specification: photomultiplier tubes
Organization: TSE
Year: 2010
Status: Active
TS 8543/T1
Title: Methods for determining swelling and slake-durability index properties of rocks
Organization: TSE
Year: 2008
Status: Active
TS EN 1662/AC
Title: Hexagon bolts with flange - Small series
Organization: TSE
Year: 2007
Status: Active
TSE CEN ISO/TS 17892-10
Title: Geotechnical investigation and testing -Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)
Organization: TSE
Year: 2007
Status: Active
TS EN 14035-8
Title: Fireworks - Part 8: Bengal sticks; Specification and test methods
Organization: TSE
Year: 2008
Status: Inactive
TS EN ISO 2812-5
Title: Paints and varnishes - Determination of resistance to liquids - Part 5: Temperature-gradient oven method
Organization: TSE
Year: 2007
Status: Active
TS 13387
Title: Authorized services for load carrying bands (systems) - Rules
Organization: TSE
Year: 2009
Status: Active
TS EN 3155-040
Title: Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard
Organization: TSE
Year: 2007
Status: Active
TS EN 1993-5
Title: Eurocode 3 - Design of steel structures - Part 5: Piling
Organization: TSE
Year: 2007
Status: Active
TS EN 14035-23/AC
Title: Fireworks - Part 23: Non-hand-held sparklers - Specification and test methods
Organization: TSE
Year: 2008
Status: Inactive
TS EN 13586/AC
Title: Cranes - Access
Organization: TSE
Year: 2007
Status: Inactive
TS EN 12271
Title: Surface dressing - Requirements
Organization: TSE
Year: 2010
Status: Active
TS EN 62310-2
Title: tatic transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements (IEC 62310-2:2006, modified) / Note: Endorsement notice
Organization: TSE
Year: 2007
Status: Active
TS EN 300113-2 V 1.4.1
Title: Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelo...
Organization: TSE
Year: 2007
Status: Inactive
TS EN 843-2
Title: Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio
Organization: TSE
Year: 2007
Status: Active
TS EN 1367-1
Title: Tests for thermal and weathering properties of aggregates ? Part 1: Determination of resistance to freezing and thawing
Organization: TSE
Year: 2009
Status: Active
TS EN ISO 9073-14
Title: Textiles - Test methods for nonwovens - Part 14: Coverstock wetback
Organization: TSE
Year: 2007
Status: Active
TSE CLC 62258-3
Title: Semiconductor die products - Part 3: Recommendations for good practice in handling, packing and storage
Organization: TSE
Year: 2007
Status: Active
TS EN 60061-2/A36
Title: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
Organization: TSE
Year: 2009
Status: Active
TS 663/ T1
Title: Road Vehicles ? Tyre chains
Organization: TSE
Year: 2008
Status: Inactive
TS EN 14219/AC
Title: Hexagon bolts with flange with metric fine pitch thread - Small series
Organization: TSE
Year: 2007
Status: Active
TS EN 3339
Title: Aerospace series - Aluminium alloy AL-P7010-T76 - Die forgings - a <kleiner => 200 mm
Organization: TSE
Year: 2007
Status: Active
TS EN 61061-1
Title: Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements
Organization: TSE
Year: 2007
Status: Active
TS EN 62056-62
Title: Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes
Organization: TSE
Year: 2007
Status: Inactive
TS 7244
Title: Work places- Cafeterias- General rules
Organization: TSE
Year: 2010
Status: Active
TS EN 15016-2/AC
Title: Technical drawings - Railway applications - Part 2: Parts lists
Organization: TSE
Year: 2007
Status: Active
TS IEC 60050-801
Title: International Electrotechnical Vocabulary Acoustics and Electro - Acoustics
Organization: TSE
Year: 2009
Status: Active
TS EN 4358
Title: Aerospace series - Six lobe recess - Drivers, double ended, 90
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 7143
Title: Binders for paints and varnishes - Methods of test for characterizing water-based binders
Organization: TSE
Year: 2007
Status: Active
TS EN 50317/A2
Title: Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
Organization: TSE
Year: 2007
Status: Inactive
TS EN 4057-100
Title: Aerospace series - Cable ties for harnesses - Test methods - Part 100: General
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 11909
Title: Binders for paints and varnishes - Polyisocyanate resins - General methods of test
Organization: TSE
Year: 2007
Status: Active
TS 3225 /T1
Title: Leaf Tea- To be used for producing black tea
Organization: TSE
Year: 2008
Status: Active
TS 13487
Title: Petroleum products - Residual fuels - Determination of phosphorous content - Ultra-violet spectrometry
Organization: TSE
Year: 2011
Status: Active
TS EN 4356
Title: Aerospace series - Six lobe recess - Drivers, short
Organization: TSE
Year: 2007
Status: Active
TS EN 15038
Title: Translation services - Service requirements
Organization: TSE
Year: 2009
Status: Inactive
TS EN 14704-3
Title: Determination of the elasticity of fabrics - Part 3: Narrow fabrics
Organization: TSE
Year: 2007
Status: Active
TS 12103
Title: Sodium determination in sponge titanium
Organization: TSE
Year: 1996
Status: Active
TS ISO 22241-2/COR 1
Title: Diesel engines - NO x reduction additive AV 32 - Part 2: Test methods
Organization: TSE
Year: 2012
Status: Active
TS EN ISO 5350-2
Title: Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light
Organization: TSE
Year: 2007
Status: Active
TS EN 14267+AC
Title: Irrigation techniques - Irrigation hydrants
Organization: TSE
Year: 2009
Status: Active
TS 11311/T1
Title: Petri Dishes-Single Use-Plastic
Organization: TSE
Year: 1995
Status: Inactive
TS EN ISO 12680-1
Title: Methods of test for refractory products - Part 1: Determination of dynamic Young's modulus (MOE) by impulse excitation of vibration (ISO 12680-1:2005)
Organization: TSE
Year: 2007
Status: Active
TS EN ISO 21415-4
Title: Wheat and wheat flour - Gluten content - Part 4: Determination of dry gluten from wet gluten by a rapid drying method
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 13628-7
Title: Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems
Organization: TSE
Year: 2007
Status: Active
TS EN 12487
Title: Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
Organization: TSE
Year: 2008
Status: Active
TS EN 62056-47
Title: Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks (CEI 62056-47:2006) / Note: Endorsement notice
Organization: TSE
Year: 2007
Status: Active
TS EN 1395-3
Title: Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying
Organization: TSE
Year: 2008
Status: Active
TS EN 15336
Title: Adhesives - Determination of the time to rupture of bonded joints under static load
Organization: TSE
Year: 2007
Status: Active
TS EN 10247
Title: Micrographic examination of the non-metallic inclusion content of steels using standard pictures
Organization: TSE
Year: 2008
Status: Active
TS EN 60426
Title: Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
Organization: TSE
Year: 2007
Status: Active
TS ISO 4687-1
Title: Iron ores; determination of phosphorus content; part 1: molybdenum blue spectrophotometric method
Organization: TSE
Year: 2009
Status: Active
TS EN 2349-410
Title: Aerospace series - Requirements and test procedures for relays and contactors
Organization: TSE
Year: 2008
Status: Active
TS EN 165000-5
Title: Film and hybrid integrated circuits - Part 5: Procedure for qualification approval
Organization: TSE
Year: 2009
Status: Active
TS 13409
Title: Test Method for Demulsibility Characteristics of Lubricating Oils
Organization: TSE
Year: 2010
Status: Active
TS EN 4165-007
Title: Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 ?C continuous - Part 007: Plug for 2 and 4 modules, series 3 - Product standard
Organization: TSE
Year: 2008
Status: Active
TS EN 1001-1
Title: Durability of wood and wood-based products - Terminology - Part 1: List of equivalent terms
Organization: TSE
Year: 2009
Status: Active
TS EN 50090-2-2/A2
Title: Home and building electronic systems (HBES) - Part 2-2: System overview - General technical requirements
Organization: TSE
Year: 2008
Status: Inactive
TS EN 60061-3/A38
Title: Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969/A38:2007)
Organization: TSE
Year: 2008
Status: Inactive
TS EN 60444-9
Title: Measurement of quartz crystal unit parameters - Part 9: Measurement of spurious resonances of piezoelectric crystal units
Organization: TSE
Year: 2008
Status: Active
TS EN 301178-2 V1.2.2
Title: Electromagnetic compatibility and Radio spectrum Matters (ERM); Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-G...
Organization: TSE
Year: 2007
Status: Active
TS EN 1504-3
Title: Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
Organization: TSE
Year: 2008
Status: Active
TS EN 62317-9/A1
Title: Ferrite cores - Dimensions - Part 9: Planar cores
Organization: TSE
Year: 2008
Status: Active
TSE CEN/TS 1099
Title: Plywood - Biological durability - Guidance for the assessment of plywood for use in different use classes
Organization: TSE
Year: 2011
Status: Active
TS EN 1064+A1
Title: Health informatics - Standard communication protocol - Computer-assisted electrocardiography
Organization: TSE
Year: 2008
Status: Active
TS EN 13086
Title: Lead and lead alloys- Lead oxides
Organization: TSE
Year: 2008
Status: Active
TS EN 15009
Title: Aerosol containers - Compartmented aerosol containers
Organization: TSE
Year: 2008
Status: Active
TS EN 942
Title: Timber in joinery- General requirements
Organization: TSE
Year: 2009
Status: Active
TS EN 71-4/A3
Title: Safety of toys - Part 4: Experimental sets for chemistry and related activities
Organization: TSE
Year: 2007
Status: Inactive
TS 11689
Title: Work places - Brine olive factories - General rules
Organization: TSE
Year: 2012
Status: Active
TS EN 1309-2
Title: Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules
Organization: TSE
Year: 2010
Status: Active
TS ISO 10526
Title: CIE Standard Illuminants For Colorimetry
Organization: TSE
Year: 2008
Status: Inactive
TS EN 301025-2 V1.3.1
Title: Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class ""D"" Digital Selective Calling (DSC);...
Organization: TSE
Year: 2007
Status: Inactive
TS EN 61095/A1
Title: Electromechanical contactors for household and similar purposes
Organization: TSE
Year: 2008
Status: Inactive
TS 13456
Title: Work places ? Provide maintenance, repair etc. for waste water channels and their components - Genaral rules
Organization: TSE
Year: 2011
Status: Active
TS 7847 / T1
Title: Paints and plasters ? Coating materials and coating systems for exterior masonry and concrete
Organization: TSE
Year: 2008
Status: Inactive
TS EN 1739
Title: Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
Organization: TSE
Year: 2009
Status: Active
TS 13405
Title: Aromatic hydrocarbons - Test for neutrality
Organization: TSE
Year: 2009
Status: Active
TS IEC 60050-891
Title: International Electrotechnical Vocabulary - Part 891: Electrobiology
Organization: TSE
Year: 2011
Status: Active
TS EN 12588
Title: Lead and lead alloys - Rolled lead sheet for building purposes
Organization: TSE
Year: 2008
Status: Active
TS 13531
Title: Feed Grinding Machines (Stone Mill type or Hammer Mill Type)
Organization: TSE
Year: 2012
Status: Active
TS EN 13771-2
Title: Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units
Organization: TSE
Year: 2009
Status: Active
TS ISO 10110-12
Title: Optics and photonics - Preparation of drawings for optical elements and systems - Part 12: Aspheric surfaces
Organization: TSE
Year: 2008
Status: Active
TS 9591
Title: Rules for liquid vegetable oil plants
Organization: TSE
Year: 2014
Status: Active
TS EN 60079-30-2
Title: Explosive atmospheres - Part 30-2: Electrical resistance trace heating-Application guide for design, installation and maintenance
Organization: TSE
Year: 2009
Status: Inactive
TS EN ISO 11140-3
Title: Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test
Organization: TSE
Year: 2011
Status: Active
TS EN 10079
Title: Definition of steel products
Organization: TSE
Year: 2009
Status: Active
TS 13447
Title: Work places ? Natural mineral water filling facilities - General rules
Organization: TSE
Year: 2011
Status: Active
TS EN 14991
Title: Precast concrete products - Foundation elements
Organization: TSE
Year: 2008
Status: Active
TS 870
Title: Firearms-Shotguns with smooth bore for hunting, sport and competition
Organization: TSE
Year: 2013
Status: Active
TS EN ISO 19137
Title: Geographic information ? Core profile of the spatial schema
Organization: TSE
Year: 2010
Status: Active
TS EN 1323
Title: Adhesives for tiles - Concrete slabs for tests
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 11890-1
Title: Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 105-E16
Title: Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics
Organization: TSE
Year: 2008
Status: Active
TS EN 3531
Title: Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a ? 6 mm - 1 750 MPa ? Rm ?...
Organization: TSE
Year: 2008
Status: Active
TS EN 4004
Title: Aerospace series - Aluminium alloy AL-P3103-H16 - Sheet and strip 0, 4 mm <kleiner => a <kleiner => 6 mm
Organization: TSE
Year: 2008
Status: Active
TS EN 866-2/AC
Title: Biological systems for testing sterilizers and sterilization processes - Part 2: Particular systems for use in ethylene oxide sterilizers
Organization: TSE
Year: 2006
Status: Inactive
TS EN 4165-023
Title: Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 ?C continuous - Part 023: Tooling for assembly of receptacle coding component - Product standard
Organization: TSE
Year: 2008
Status: Active
TS EN 3364
Title: Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, softened, forging stock a or D <kleiner => 300 mm
Organization: TSE
Year: 2008
Status: Active
TS EN 1395-6
Title: Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems
Organization: TSE
Year: 2008
Status: Active
TS 12794
Title: Local television stations- General rules
Organization: TSE
Year: 2013
Status: Active
TS EN 4170
Title: Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle
Organization: TSE
Year: 2008
Status: Active
TS EN 15301-2
Title: Surfaces for sports areas - Part 2: Determination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory
Organization: TSE
Year: 2008
Status: Active
TS EN 4466
Title: Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D <kleiner => 150 m...
Organization: TSE
Year: 2008
Status: Active
TS 1865
Title: Sodium Hydroxide for Industrial Use (Caustic soda)
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 5398-3
Title: Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry
Organization: TSE
Year: 2008
Status: Active
TS EN 2349-414
Title: Aerospace series - Requirements and test procedures for relays and contactors - Part 414: Mechanical shock
Organization: TSE
Year: 2008
Status: Active
TS EN 3524
Title: Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm ? a ? 6 mm - 1 080 MPa ? Rm ? 1 280 MPa
Organization: TSE
Year: 2008
Status: Active
TS EN 14879-4
Title: Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
Organization: TSE
Year: 2008
Status: Active
TS EN 3913
Title: Aerospace series - Insert, thin wall, self-locking, short, in heat resisting nickel base alloy NI-PH2601 (Ni- P100HT, Inconel 718), silver plated on internal thread, for salvage of components
Organization: TSE
Year: 2008
Status: Active
TS EN 13577
Title: Chemical attack on concrete - Determination of aggressive carbon dioxide content in water
Organization: TSE
Year: 2008
Status: Active
TS EN 15490
Title: Ethanol as a blending component for petrol - Determination of pHe
Organization: TSE
Year: 2008
Status: Active
TS EN 1963
Title: Textile floor coverings - Tests using the Lisson Tretrad Machine
Organization: TSE
Year: 2008
Status: Inactive
TS EN ISO 17657-2
Title: Resistance welding - Welding current measurement for resistance welding - Part 2: Welding current meter with current sensing coil
Organization: TSE
Year: 2008
Status: Active
TS EN 15272-2
Title: Inland navigation vessels - Equipment for rope leading - Part 2: Fairlead
Organization: TSE
Year: 2008
Status: Active
TS ISO OECD 789-10
Title: Agricultural tractors - Test procedures - Part 10: Hydraulic power at tractor/implement interface
Organization: TSE
Year: 2009
Status: Active
TS EN ISO 16276-1
Title: orrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull- off testing
Organization: TSE
Year: 2008
Status: Active
TS EN 62271-209
Title: High-voltage switchgear and controlgear - Part 209: Cable connections for gas- insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fl...
Organization: TSE
Year: 2008
Status: Active
TS EN 60450/A1
Title: Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
Organization: TSE
Year: 2008
Status: Active
TS IEC 60115-6-101
Title: Fixed resistors for use in electronic equipment; part 6: detail specification: fixed thick film resistor networks with individually measurable resistors, all of equal value and equal dissipation,...
Organization: TSE
Year: 2008
Status: Active
TS 2282/T1
Title: Tarhana
Organization: TSE
Year: 2008
Status: Active
TS EN 62025-1
Title: High frequency inductive components - Non-electrical characteristics and measuring methods - Part 1: Fixed, surface mounted inductors for use in electronic and telecommunication equipment
Organization: TSE
Year: 2008
Status: Active
TS EN 1895/AC
Title: Adhesives for paper and board, packaging and disposable sanitary products - 180?-"T" peel test for a flexible-to-flexible assembly
Organization: TSE
Year: 2010
Status: Active
TS EN 60309-4
Title: Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock (IEC 60309-4:2006, modified)
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 13433
Title: Geosynthetics - Dynamic perforation test (cone drop test)
Organization: TSE
Year: 2008
Status: Active
TS EN 3646-002
Title: Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 ?C or 200 ?C continuous - Part 002: Specification of performance and contact arrangements
Organization: TSE
Year: 2008
Status: Active
TS EN 13546+A1
Title: Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players - Requirements and test methods
Organization: TSE
Year: 2008
Status: Active
TS EN 61025
Title: Fault tree analysis (FTA)
Organization: TSE
Year: 2008
Status: Active
TS EN 62347
Title: Guidance on system dependability specifications
Organization: TSE
Year: 2008
Status: Active
TS EN 3746
Title: Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Hardness 80 IRHD
Organization: TSE
Year: 2008
Status: Active
TS EN 12698-1
Title: Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
Organization: TSE
Year: 2008
Status: Active
TS 13382
Title: Rocket
Organization: TSE
Year: 2008
Status: Active
TS PREN 60489-2/T1
Title: Methods of measurement for radio equipment used in the mobile services; part 2: transmitters employing A3E, F3E or G3E emissions
Organization: TSE
Year: 2008
Status: Active
TS EN 12522-1
Title: Furniture removal activities - Furniture removal for private individuals - Part 1: Service specification
Organization: TSE
Year: 2012
Status: Active
TS EN 560/AC
Title: Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes
Organization: TSE
Year: 2010
Status: Active
TS 13446
Title: Petroleum products ? Gasoline ? Determination of benzene, toluene, ethylbenzene, para, meta and ortho xylenes, C9 and heavier aromatics, and total aromatics by gas chromatography
Organization: TSE
Year: 2011
Status: Active
TS ISO 6162-1
Title: Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3, 5 MPa (35 bar) to 35 MPa (350 bar...
Organization: TSE
Year: 2008
Status: Active
TS EN 61241-18/AC
Title: Electrical apparatus for use in the presence of combustible dust - Part 18: Protection by encapsulation "mD
Organization: TSE
Year: 2008
Status: Inactive
TS 7038
Title: Work places- Rules for fisheries products shops
Organization: TSE
Year: 2014
Status: Active
TS EN 15323
Title: Bitumen and bituminous binders - Accelerated long-term ageing/conditioning by the rotating cylinder method (RCAT)
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 12086-1/AC
Title: Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications
Organization: TSE
Year: 2008
Status: Active
TS EN 197-1/A3
Title: Cement - Part 1: Composition, specifications and conformity criteria for common cements
Organization: TSE
Year: 2010
Status: Inactive
TS EN 60034-12/A1
Title: Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
Organization: TSE
Year: 2008
Status: Inactive
TS EN 50290-2-26/A1
Title: Communication cables ? Part 2-26: Common design rules and construction; Halogen free flame retardant thermoplastic sheathing insulation compounds
Organization: TSE
Year: 2009
Status: Active
TS 9300
Title: Workplaces - Rules for places which provides advertising services
Organization: TSE
Year: 2014
Status: Active
TS EN ISO 8062-1
Title: Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary
Organization: TSE
Year: 2009
Status: Active
TS ISO 23275-2
Title: Animal and vegetable fats and oils- Cocoa butter equivalents in cocoa butter and plain chocolate- Part 2: Quantification of cocoa butter equivalents
Organization: TSE
Year: 2008
Status: Inactive
TS EN 60061-2/A35
Title: Lamp camp and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
Organization: TSE
Year: 2008
Status: Active
TS EN 60384-4-1
Title: Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification: Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ
Organization: TSE
Year: 2008
Status: Active
TS EN 225-1
Title: Atomizing oil burners - Oil burner pumps and oil burner motors - Connecting dimensions - Part 1: Oil burner pumps
Organization: TSE
Year: 2008
Status: Active
TS EN 50216-1
Title: Power transformer and reactor fittings -- Part 1: General
Organization: TSE
Year: 2009
Status: Active
TS EN ISO 12957-1
Title: Geosynthetics - Determination of the friction characteristics - Part 1: Direct shear test
Organization: TSE
Year: 2009
Status: Active
TS EN 4008-015
Title: Aerospace series - Elements of electrical and optical connection - Crimping tool and associated accessories - Part 015: Positioner for crimping tool M22520/2-01 - Product standard
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 8069
Title: Dried milk - Determination of content of lactic acid and lactates
Organization: TSE
Year: 2008
Status: Active
TS EN 4639-001
Title: Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1, 25 mm diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification
Organization: TSE
Year: 2008
Status: Active
TS EN 12809/A1/AC
Title: Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods
Organization: TSE
Year: 2008
Status: Inactive
TS EN ISO 18472
Title: Sterilization of health care products - Biological and chemical indicators - Test equipment
Organization: TSE
Year: 2010
Status: Active
TS EN 3061
Title: Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads
Organization: TSE
Year: 2008
Status: Active
TS EN 15337
Title: Adhesives - Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
Organization: TSE
Year: 2008
Status: Active
TS EN 3745-601
Title: Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density / Note: Applies in conjunction with EN 3745-100.
Organization: TSE
Year: 2008
Status: Active
TS EN 15470
Title: Liquefied petroleum gases - Determination of dissolved residues - High temperature Gas chromatographic method
Organization: TSE
Year: 2008
Status: Active
TS 1896
Title: Engine oils and base stocks ? Determination of apparent viscosity between -5 ?C and -35 ?C using cold cranking simulator
Organization: TSE
Year: 2010
Status: Active
TS EN ISO 21078-2
Title: Determination of boron(III) oxide in refractory products - Part 2: Acid extraction method for the determination of boron(III) oxide in binder components
Organization: TSE
Year: 2008
Status: Active
TS 13158-2
Title: Solution for spreading on highways for de-icing and anti-icing
Organization: TSE
Year: 2009
Status: Active
TS EN 50494
Title: Satellite signal distribution over a single coaxial cable in single dwelling installations
Organization: TSE
Year: 2008
Status: Active
TS EN 61188-5-3
Title: Printed boards and printed board assemblies - Design and use - Part 5-3: Attachment (land/joint) considerations - Components with gull-wing leads on two sides
Organization: TSE
Year: 2008
Status: Active
TS EN 2573
Title: Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Softened - Rm ? 780 MPa - Wire - 0,25 mm ? De ? 3 mm
Organization: TSE
Year: 2008
Status: Active
TS EN 61131-2
Title: Programmable controllers - Part 2: Equipment requirements and tests
Organization: TSE
Year: 2010
Status: Active
TS EN ISO 11608-4
Title: Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen- injectors
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 11807-2
Title: Integrated optics - Vocabulary - Part 2: Terms used in classification
Organization: TSE
Year: 2009
Status: Active
TS IEC/TR 60825-14
Title: Safety of laser products - Part 14: A user's guide
Organization: TSE
Year: 2008
Status: Active
TS EN 3745-303
Title: Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth / Note: Applies in conjunction with EN 3745-100.
Organization: TSE
Year: 2008
Status: Active
TS EN 15217
Title: Energy performance of buildings - Methods for expressing energy performance and for energy certification of buildings
Organization: TSE
Year: 2008
Status: Active
TS ISO 6720
Title: Agricultural machinery; equipment for sowing, planting, distributing fertilizers and spraying; recommended working widths
Organization: TSE
Year: 2008
Status: Active
TS EN 4317
Title: Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Non heat treated, forging stock a or D <kleiner => 200 mm
Organization: TSE
Year: 2008
Status: Active
TS 13100
Title: Authorized services for radio equipment ? Rules
Organization: TSE
Year: 2011
Status: Active
TS EN ISO 15875-1/A1
Title: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General - Amendment 1
Organization: TSE
Year: 2008
Status: Active
TS EN ISO 20776-2
Title: Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 2: ...
Organization: TSE
Year: 2008
Status: Active
TS EN 14415
Title: Geosynthetic barriers - Test method for determining the resistance to leaching
Organization: TSE
Year: 2009
Status: Active


Advertisement