ASTM C640
Title:
STANDARD SPECIFICATION FOR CORKBOARD AND CORK PIPE THERMAL INSULATION
Organization: ASTM
Year: 1983
Status: Inactive
ASTM D3784
Title:
Standard Performance Specification for Men's and Boys' Woven Bathrobe and Dressing Gown Fabrics
Organization: ASTM
Year: 2002
Status: Inactive
ASTM A308
Title:
Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
Organization: ASTM
Year: 2002
Status: Inactive
ASTM A865
Title:
Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
Organization: ASTM
Year: 2003
Status: Inactive
ASTM D5247
Title:
Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms
Organization: ASTM
Year: 1992
Status: Inactive
UOP800
Title:
VANADIUM, NICKEL AND IRON IN PETROLEUM OILS BY ATOMIC ABSORPTION SPECTROPHOTOMETRY
Organization: ASTM
Year: 1979
Status: Inactive
ASTM E936
Title:
Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D3685
Title:
STANDARD TEST METHOD FOR PARTICULATES INDEPENDENTLY OR FOR PARTICULATES AND COLLECTED RESIDUE SIMULTANEOUSLY IN STACK GASES (R 1990)
Organization: ASTM
Year: 1978
Status: Inactive
ASTM D4271
Title:
Standard Practice for Writing Statements on Sampling in Test Methods for Textiles
Organization: ASTM
Year: 1988
Status: Inactive
ASTM C1412
Title:
Standard Practice for Microwave Oven Dissolution of Glass Containing Radioactive and Mixed Wastes
Organization: ASTM
Year: 1999
Status: Inactive
ASTM C241
Title:
Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
Organization: ASTM
Year: 1990
Status: Inactive
ASTM C330
Title:
Standard Specification for Lightweight Aggregates for Structural Concrete
Organization: ASTM
Year: 2005
Status: Inactive
ASTM B785
Title:
Standard Specification for Compact Round Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
Organization: ASTM
Year: 1993
Status: Inactive
ASTM E1743
Title:
Standard Practice for Selection and Use of Portable Retroreflectometers for the Measurement of Pavement Marking Materials
Organization: ASTM
Year: 1996
Status: Inactive
UOP425
Title:
SURFACE AREA, PORE VOLUME AND PORE DIAMETER OF POROUS SUBSTANCES BY NITROGEN ADSORPTION
Organization: ASTM
Year: 1986
Status: Inactive
ASTM D5877
Title:
Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements - Diagrams Based on Data Analytical Calculations
Organization: ASTM
Year: 1995
Status: Inactive
ASTM E1674
Title:
Standard Test Method for Cardiac Sensitization Study on Dogs
Organization: ASTM
Year: 1999
Status: Inactive
ASTM B404/B404M
Title:
Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins
Organization: ASTM
Year: 2002
Status: Inactive
ASTM D1549
Title:
STANDARD TEST METHOD FOR ZINC IN LUBRICATING OILS AND ADDITIVES (POLAROGRAPHIC METHOD)
Organization: ASTM
Status: Inactive
ASTM D3068
Title:
Standard Specification for Safe Fill of Aerosol Containers
Organization: ASTM
Year: 1980
Status: Inactive
ASTM D3822
Title:
Standard Test Method for Tensile Properties of Single Textile Fibers
Organization: ASTM
Year: 2007
Status: Inactive
ASTM E2118
Title:
Standard Guide for Coordination of Clinical Laboratory Services within the Electronic Health Record Environment and Networked Architectures
Organization: ASTM
Year: 2000
Status: Inactive
UOP846
Title:
COMPOSITION OF C4 OLEX EFFLUENT BY GAS CHROMATOGRAPHY
Organization: ASTM
Year: 1983
Status: Inactive
ASTM E1910
Title:
Standard Test Method for Agricultural pH Control Agents
Organization: ASTM
Year: 2004
Status: Inactive
ASTM A591
Title:
STANDARD SPECIFICATION FOR STEEL SHEET, COLD-ROLLED, ELECTROLYTIC ZINC-COATED (R 1983) (E1-1983) (E2-1983)
Organization: ASTM
Year: 1977
Status: Inactive
ASTM E268
Title:
STANDARD TERMINOLOGY RELATING TO ELECTROMAGNETIC TESTING
Organization: ASTM
Year: 1989
Status: Inactive
ASTM F1463
Title:
Standard Specification for Alarm Signals in Medical Equipment Used in Anesthesia and Respiratory Care
Organization: ASTM
Year: 1993
Status: Inactive
ASTM F323
Title:
STANDARD PRACTICE FOR PRECISION CLASSIFICATION OF PARTICLES
Organization: ASTM
Year: 1978
Status: Inactive
ASTM D2796
Title:
STANDARD TERMINOLOGY RELATING TO MEGASCOPIC DESCRIPTION OF COAL AND COAL SEAMS AND MICROSCOPICAL DESCRIPTION AND ANALYSIS OF COAL
Organization: ASTM
Year: 1994
Status: Inactive
ASTM C705
Title:
STANDARD TEST METHODS FOR CHEMICAL ANALYSIS OF ZIRCONIA REFRACTORIES
Organization: ASTM
Year: 1992
Status: Inactive
ASTM D568
Title:
STANDARD TEST METHOD FOR RATE OF BURNING AND/OR EXTENT AND TIME OF BURNING OF FLEXIBLE PLASTICS IN A VERTICAL POSITION
Organization: ASTM
Year: 1977
Status: Inactive
ASTM D1692
Title:
Method of Test for Rate of Burning or Extent and Time of Burning of Cellular Plastics Using a Specimen Horizontal
Organization: ASTM
Year: 1976
Status: Inactive
ASTM PS86
Title:
Provisional Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway
Organization: ASTM
Year: 1997
Status: Inactive
ASTM C1113
Title:
Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
Organization: ASTM
Year: 1999
Status: Inactive
ASTM D5037
Title:
Standard Test Method for Comparison of Waterborne Petroleum Oils by High Performance Liquid Chromatography
Organization: ASTM
Year: 1990
Status: Inactive
UOP405
Title:
HYDROGEN CHLORIDE IN GAS STREAMS BY POTENTIOMETRIC TITRATION
Organization: ASTM
Status: Inactive
ASTM D2730
Title:
STANDARD TEST METHOD FOR SAG FLOW OF HIGHLY VISCOUS RESINS
Organization: ASTM
Year: 1980
Status: Inactive
ASTM E167
Title:
Standard Practice for Goniophotometry of Objects and Materials
Organization: ASTM
Year: 1996
Status: Inactive
ASTM D1469
Title:
Standard Test Method for Total Rosin Acids Content of Coating Vehicles
Organization: ASTM
Year: 2000
Status: Inactive
ASTM C812
Title:
STANDARD TEST METHOD FOR HYDROPHOBIC CONTAMINATION ON GLASS BY WATER CONDENSATION (R 1980)
Organization: ASTM
Year: 1975
Status: Inactive
ASTM D246
Title:
Standard Test Method for Distillation of Creosote and Creosote-Coal Tar Solutions
Organization: ASTM
Year: 2004
Status: Inactive
ASTM D2963
Title:
Standard Test Method for Testing Flow Table Consistency of Clay-Stabilized Asphalt Emulsions
Organization: ASTM
Year: 1978
Status: Inactive
ASTM D782
Title:
Standard Test Method for Shipping Containers in Revolving Hexagonal Drum
Organization: ASTM
Year: 1982
Status: Inactive
ASTM 10.05
Title:
Electronics (II)
Organization: ASTM
Year: 2003
Status: Inactive
UOP868
Title:
TRACE SATURATES IN HIGH PURITY AROMATICS BY GC
Organization: ASTM
Year: 1988
Status: Active
ASTM D1682
Title:
STANDARD TEST METHODS FOR BREAKING LOAD AND ELONGATION OF TEXTILE FABRICS
Organization: ASTM
Status: Inactive
ASTM D4248
Title:
Standard Practice for Design of Steam Turbine Generator Oil Systems
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D234
Title:
Standard Specification for Raw Linseed Oil
Organization: ASTM
Year: 1982
Status: Inactive
ASTM F1274
Title:
Standard Specification for Fixed Wing Advanced Life Support Transport Units
Organization: ASTM
Year: 1991
Status: Inactive
ASTM E2055
Title:
Standard Practice for Referencing Test Methods for Chemical Analysis of Metals and Related Materials
Organization: ASTM
Year: 1999
Status: Inactive
ASTM D3583
Title:
Standard Methods of Testing Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements, or Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type, for Portland C...
Organization: ASTM
Year: 1985
Status: Inactive
ASTM A511
Title:
Standard Specification for Seamless Stainless Steel Mechanical Tubing
Organization: ASTM
Year: 2004
Status: Inactive
ASTM D5583
Title:
Standard Test Method for Detection and Estimation of Retention of Wood Preservatives by Aspergillus Bioassaying
Organization: ASTM
Year: 2006
Status: Inactive
ASTM C571
Title:
Standard Methods for Chemical Analysis of Carbon and Carbon-Ceramic Refractories
Organization: ASTM
Year: 1981
Status: Inactive
ASTM F1251
Title:
Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
Organization: ASTM
Year: 1989
Status: Inactive
ASTM D2750
Title:
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastics Utilities Conduit and Fittings
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D5803
Title:
Standard Test Method for Tensile Strength at Zero-Span ( Wet Zero-Span Tensile )
Organization: ASTM
Year: 1997
Status: Inactive
ASTM E2390
Title:
Standard Guide for Examination of Documents Produced with Toner Technology
Organization: ASTM
Year: 2006
Status: Inactive
ASTM A569/A569M
Title:
Standard Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial
Organization: ASTM
Year: 1998
Status: Inactive
ASTM F933
Title:
Standard Guide for Evaluation of Oil Water Separation Systems for Spilled Oil Recovery Applications
Organization: ASTM
Year: 1985
Status: Inactive
ASTM F1195
Title:
Standard Specification for Rigid Laryngoscopes for Tracheal Intubation - Hook on Fittings for Fiberilluminated Blades and Handles
Organization: ASTM
Year: 1999
Status: Inactive
ASTM A532
Title:
STANDARD SPECIFICATION FOR ABRASION-RESISTANT CAST IRONS
Organization: ASTM
Year: 1982
Status: Inactive
ASTM D4558
Title:
Standard Practice for Collecting Benthic Macroinvertebrates with Drift Nets
Organization: ASTM
Year: 2002
Status: Inactive
ASTM F769
Title:
Standard Test Method for Measuring Transistor and Diode Leakage Currents
Organization: ASTM
Year: 2000
Status: Inactive
ASTM A1026
Title:
Standard Specification for Alloy Steel Structural Shapes for Use in Building Framing
Organization: ASTM
Year: 2003
Status: Inactive
ASTM F1570
Title:
Standard Test Method for Determining the Tactile Ratio of a Membrane Switch
Organization: ASTM
Year: 2001
Status: Inactive
ASTM E897
Title:
Standard Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel
Organization: ASTM
Year: 1988
Status: Inactive
ASTM B359
Title:
Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins
Organization: ASTM
Year: 1998
Status: Inactive
ASTM C1583
Title:
Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
Organization: ASTM
Year: 2004
Status: Inactive
ASTM E764
Title:
Standard Practice for Identifying Test Methods for Breeder Reactor Core Materials
Organization: ASTM
Year: 1980
Status: Inactive
ASTM A470
Title:
Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
Organization: ASTM
Year: 2003
Status: Inactive
ASTM E1126
Title:
Standard Terminology Relating to Biomass Fuels
Organization: ASTM
Year: 1994
Status: Inactive
ASTM D2926
Title:
STANDARD TEST METHOD FOR BULK MODULUS OF ELASTICITY OF SYNTACTIC FOAM (PISTON-CYLINDER METHOD)
Organization: ASTM
Year: 1970
Status: Inactive
ASTM D4909
Title:
Standard Test Method for Color Stability of Vinyl-Coated Glass Textiles to Accelerated Weathering
Organization: ASTM
Year: 1989
Status: Inactive
UOP412
Title:
LOSS ON IGNITION OF CATALYSTS AT 500 C
Organization: ASTM
Year: 1987
Status: Inactive
ASTM D5916
Title:
Standard Test Method for Detection and Enumeration of Clostridium Perfringens from Water and Extracted Sediments by Membrane Filtration (MF)
Organization: ASTM
Year: 1996
Status: Inactive
ASTM C29
Title:
STANDARD TEST METHOD FOR UNIT WEIGHT AND VOIDS IN AGGREGATE
Organization: ASTM
Year: 1989
Status: Inactive
ASTM D5730
Title:
Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Ground Water
Organization: ASTM
Year: 2004
Status: Inactive
ASTM D1320
Title:
STANDARD TEST METHOD FOR TENSILE STRENGTH OF PARAFFIN WAX
Organization: ASTM
Year: 1973
Status: Inactive
ASTM D5140
Title:
Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D3400
Title:
Standard Specification for Liquid Sodium Silicates
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D3164M
Title:
Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
Organization: ASTM
Year: 2003
Status: Inactive
ASTM F26
Title:
Standard Test Methods for Determining the Orientation of a Semiconductive Single Crystal
Organization: ASTM
Year: 1987
Status: Inactive
ASTM C1034
Title:
Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Cookwear
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D2579
Title:
Standard Test Method for Total Organic Carbon in Water
Organization: ASTM
Year: 1993
Status: Inactive
UOP804
Title:
CARBONYL CONTENT OF PHENOL BY VISIBLE SPECTROPHOTOMETRY
Organization: ASTM
Year: 1983
Status: Inactive
ASTM D496
Title:
Standard Specification for Chip Soap
Organization: ASTM
Year: 1974
Status: Inactive
ASTM A961
Title:
Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
Organization: ASTM
Year: 2004
Status: Inactive
ASTM B249M
Title:
Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings (Metric)
Organization: ASTM
Year: 1994
Status: Inactive
ASTM E602
Title:
Standard Test Method for Sharp-Notch Tension Testing with Cylindrical Specimens
Organization: ASTM
Year: 2003
Status: Inactive
ASTM E1389
Title:
Standard Practice for Cleanup of Fire Debris Sample Extracts by Acid Stripping
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D3770
Title:
Standard Specification for Flexible Cellular Materials - High-Resilience Polyurethane Foam (HR) and Combustion Modified High Resilience (CMHR) Polyurethane Foam
Organization: ASTM
Year: 1991
Status: Inactive
ASTM D284
Title:
Standard Test Methods for Chemical Analysis of Mercuric Oxide Pigment
Organization: ASTM
Year: 1988
Status: Inactive
ASTM F1491
Title:
Standard Specification for An Avalanche Beacon Frequency
Organization: ASTM
Year: 1993
Status: Inactive
ASTM E1235M
Title:
Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft [Metric]
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D2951
Title:
Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking
Organization: ASTM
Year: 2000
Status: Inactive
ASTM D1405
Title:
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
Organization: ASTM
Year: 2001
Status: Inactive
ASTM F745
Title:
Standard Specification for 18 Chromium-12.5 Nickel-2.5 Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications
Organization: ASTM
Year: 2007
Status: Inactive
ASTM PS125
Title:
Provisional Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
Organization: ASTM
Year: 2001
Status: Inactive
ASTM F28
Title:
Standard Test Methods for Minority-Carrier Lifetime in Bulk Germanium and Silicon by Measurement of Photoconductivity Decay
Organization: ASTM
Year: 2002
Status: Inactive
ASTM D2100
Title:
Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D1085
Title:
Standard Practice for Gaging Petroleum and Petroleum Products
Organization: ASTM
Status: Inactive
ASTM A820
Title:
Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D2003
Title:
Standard Practice for Isolation of Representative Saturates Fraction from High-Olefinic Petroleum Naphthas
Organization: ASTM
Year: 1993
Status: Inactive
ASTM D4406
Title:
Standard Test Method for Creep of Rock Core Specimens in Triaxial Compression at Ambient or Elevated Tempertures
Organization: ASTM
Year: 2004
Status: Inactive
ASTM D12
Title:
Standard Specification for Raw Tung Oil
Organization: ASTM
Year: 1988
Status: Inactive
ASTM C1444
Title:
Standard Test Method for Measuring the Angle of Repose of Free-Flowing Mold Powders
Organization: ASTM
Year: 2000
Status: Inactive
ASTM F1341
Title:
Standard Specification for Unalloyed Titanium Wire UNS R50250, UNS R50400, UNS R50550, UNS R50700, for Surgical Implant Applications
Organization: ASTM
Year: 1999
Status: Inactive
ASTM D637
Title:
Standard Test Method for Surface Irregularities of Flat Transparent Plastic Sheets
Organization: ASTM
Year: 1990
Status: Inactive
ASTM D368
Title:
Standard Test Method for Specific Gravity of Creosote and Oil-Type Preservatives
Organization: ASTM
Year: 1989
Status: Inactive
ASTM PS57
Title:
Provisional Standard Test Method for Determining Ignitability of Clothing by Electric Arc Exposure Method Using a Mannequin
Organization: ASTM
Year: 1997
Status: Inactive
ASTM F1039
Title:
Standard Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems
Organization: ASTM
Year: 1987
Status: Inactive
ASTM D3202
Title:
Standard Practice for Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor
Organization: ASTM
Year: 1994
Status: Inactive
ASTM F650
Title:
STANDARD PRACTICE FOR DETERMINING RELATIVE BIAS OF TWO PARTICLE COUNTERS USING COMPARISON PROCEDURES
Organization: ASTM
Year: 1980
Status: Inactive
ASTM E717
Title:
Standard Guide for Preparation of the Accreditation Annex of Acoustical Test Standards
Organization: ASTM
Year: 1984
Status: Inactive
ASTM B469
Title:
Standard Specification for Seamless Copper-Alloy Tubes for Pressure Applications
Organization: ASTM
Year: 1994
Status: Inactive
ASTM E416
Title:
Standard Practice for Planning and Safe Operation of a Spectrochemical Laboratory
Organization: ASTM
Year: 1998
Status: Inactive
ASTM E1540
Title:
Standard Practice for Use of a Radiochromic Liquid Dosimetry System
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D1150
Title:
Standard Single- and Multi-panel Forms for Recording Results of Exposure Tests of Paints
Organization: ASTM
Status: Inactive
ASTM D4434
Title:
Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
Organization: ASTM
Year: 2006
Status: Inactive
ASTM D2233
Title:
Standard Specification for Chlorinated Aromatic Hydrocarbons (Askarels) for Capacitors
Organization: ASTM
Year: 1986
Status: Inactive
ASTM ES38
Title:
EMERGENCY STANDARD GUIDE FOR RISK-BASED CORRECTIVE ACTION APPLIED AT PETROLEUM RELEASE SITES
Organization: ASTM
Year: 1994
Status: Inactive
ASTM E293
Title:
Standard Test Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique
Organization: ASTM
Status: Inactive
ASTM D3599
Title:
STANDARD TEST METHOD FOR FELTABILITY OF WOOL
Organization: ASTM
Year: 1977
Status: Inactive
ASTM D1949
Title:
STANDARD TEST METHOD FOR SEPARATION OF TETRAETHYLLEAD AND TETRAMETHYLLEAD IN GASOLINE
Organization: ASTM
Year: 1984
Status: Inactive
ASTM E395
Title:
Standard Test Method for Total Sulfur in Iron Ores and Related Materials by Combustion-Iodate Titration
Organization: ASTM
Year: 2002
Status: Inactive
ASTM F518
Title:
Standard Practice for Determining Effective Adhesion of Photoresist to Hard-Surface Photomask Blanks and Semiconductor Wafers During Etching
Organization: ASTM
Year: 1977
Status: Inactive
ASTM D2090
Title:
Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D3744
Title:
Standard Test Method for Aggregate Durability Index
Organization: ASTM
Year: 2003
Status: Inactive
ASTM D1404
Title:
Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
Organization: ASTM
Year: 1999
Status: Inactive
ASTM E586
Title:
STANDARD TERMINOLOGY RELATING TO INDUSTRIAL RADIOLOGY
Organization: ASTM
Year: 1990
Status: Inactive
ASTM F2307
Title:
Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
Organization: ASTM
Year: 2003
Status: Inactive
ASTM F694
Title:
Standard Test Method for Heel-Attaching Strength of Women's Shoes
Organization: ASTM
Year: 2002
Status: Inactive
ASTM D6136
Title:
Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D2323
Title:
Standard Specification for Refined Pyridine (1 Degree)
Organization: ASTM
Year: 1993
Status: Inactive
ASTM D1542
Title:
Standard Test Method for Qualitative Detection of Rosin in Varnishes
Organization: ASTM
Status: Inactive
ASTM C1152
Title:
Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
Organization: ASTM
Year: 1990
Status: Inactive
ASTM E552
Title:
Standard Test Method for Efficacy of Acute Mammalian Predacides
Organization: ASTM
Year: 1995
Status: Inactive
ASTM A422
Title:
STANDARD SPECIFICATION FOR BUTT WELDS IN STILL TUBES FOR REFINERY SERVICE
Organization: ASTM
Status: Inactive
ASTM E1387
Title:
Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography
Organization: ASTM
Year: 2001
Status: Inactive
ASTM A1010
Title:
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
Organization: ASTM
Year: 2001
Status: Inactive
ASTM F1222
Title:
Standard Classification for Hardware for Wood Fencing
Organization: ASTM
Year: 1989
Status: Inactive
ASTM F300
Title:
STANDARD TEST METHODS FOR MEASURING INTERFACE IMPEDANCE CHARACTERISTICS OF ELECTRON TUBE CATHODES
Organization: ASTM
Status: Inactive
ASTM PS65
Title:
Provisional Standard Specification for Shelter, Electrical, Equipment S-250/G
Organization: ASTM
Year: 1996
Status: Inactive
ASTM D2602
Title:
STANDARD TEST METHOD FOR APPARENT VISCOSITY OF ENGINE OILS AT LOW TEMPERATURE USING THE COLD-CRANKING SIMULATOR (IP:350/81)
Organization: ASTM
Year: 1986
Status: Inactive
ASTM E1176
Title:
STANDARD SPECIFICATION FOR POLYESTER GRADE ETHYLENE GLYCOL
Organization: ASTM
Year: 1987
Status: Inactive
ASTM D5302
Title:
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated under Low...
Organization: ASTM
Year: 2001
Status: Inactive
ASTM E1828
Title:
Standard Guide for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D2933
Title:
STANDARD TEST METHOD FOR CORROSION RESISTANCE OF COATED STEEL SPECIMENS (CYCLIC METHOD)
Organization: ASTM
Year: 1974
Status: Inactive
ASTM D4091
Title:
STANDARD SPECIFICATION FOR EXTRA HEAVY-DUTY BLACK CHLORINATED POLYETHYLENE (CPE) JACKET FOR WIRE AND CABLE
Organization: ASTM
Year: 1982
Status: Inactive
ASTM C1107
Title:
Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
Organization: ASTM
Year: 2005
Status: Inactive
ASTM F1550M
Title:
Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities After Exposure to Vandalism, b...
Organization: ASTM
Year: 1994
Status: Inactive
ASTM G104
Title:
Standard Test Method for Assessing Galvanic Corrosion Caused by the Atmosphere
Organization: ASTM
Year: 1989
Status: Inactive
ASTM D5935
Title:
Standard Practice for Plastics - Acquisition and Presentation of Comparable Single-Point Data
Organization: ASTM
Year: 1996
Status: Inactive
ASTM C677
Title:
STANDARD PRACTICE FOR USE OF A POLYETHYLENE TEREPHTHALATE REFERENCE FILM FOR THE MEASUREMENT OF THE TIME-AVERAGED VAPOR PRESSURE IN A CONTROLLED HUMIDITY SPACE
Organization: ASTM
Year: 1989
Status: Inactive
ASTM A625M
Title:
STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, BLACK PLATE, SINGLE- REDUCED (METRIC)
Organization: ASTM
Year: 1985
Status: Inactive
ASTM F1049
Title:
Standard Practice for Shallow Etch Pit Detection on Silicon Wafers
Organization: ASTM
Year: 2002
Status: Inactive
ASTM E453
Title:
Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties
Organization: ASTM
Year: 1979
Status: Inactive
ASTM A831
Title:
STANDARD SPECIFICATION FOR STAINLESS AND HEAT- RESISTING STEEL BARS, BILLETS, AND FORGINGS FOR USE IN CORE COMPONENTS
Organization: ASTM
Year: 1992
Status: Inactive
ASTM F1490
Title:
Standard Terminology Relating to Search and Rescue
Organization: ASTM
Year: 2004
Status: Inactive
ASTM F416
Title:
Standard Test Method for Detection of Oxidation Induced Defects in Polished Silicon Wafers
Organization: ASTM
Year: 1994
Status: Inactive
ASTM D5251
Title:
Standard Practice for the Operation of the Tetrapod Walker Drum Tester
Organization: ASTM
Year: 2005
Status: Inactive
ASTM D963
Title:
STANDARD SPECIFICATION FOR COPPER PHTHALOCYANINE BLUE PIGMENT
Organization: ASTM
Year: 1981
Status: Inactive
ASTM D2695
Title:
STANDARD SPECIFICATION FOR PROPYLENE GLYCOL
Organization: ASTM
Year: 1987
Status: Inactive
ASTM D5535
Title:
Standard Terminology Relating to Formed-In-Place Sealants for Joints and Cracks in Pavements
Organization: ASTM
Year: 1998
Status: Inactive
ASTM PS138
Title:
Provisional Standard Specification for Shelter, Electrical Equipment, Lightweight
Organization: ASTM
Year: 2003
Status: Inactive
ASTM F314
Title:
STANDARD TEST METHODS FOR IDENTIFICATION OF METALLIC AND FIBROUS CONTAMINANTS IN AEROSPACE FLUIDS
Organization: ASTM
Year: 1970
Status: Inactive
ASTM D3480
Title:
Standard Test Methods for Downward Force Required to Open or Activate Child-Resistant Snap-Engagement Packages
Organization: ASTM
Year: 1988
Status: Inactive
ASTM F2010
Title:
Standard Test Method for Evaluation of Glove Effects on Wearer Hand Dexterity Using a Modified Pegboard Test
Organization: ASTM
Year: 2000
Status: Inactive
ASTM D692
Title:
Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
Organization: ASTM
Year: 2000
Status: Inactive
ASTM D3629
Title:
Standard Test Method for Rubber Property - Cut Growth Resistance
Organization: ASTM
Year: 1999
Status: Inactive
ASTM E916
Title:
Standard Guide for Reporting Employee Health History Information and Core Physical Examination Results
Organization: ASTM
Year: 1986
Status: Inactive
ASTM B494
Title:
Standard Specification for Primary Zirconium
Organization: ASTM
Year: 1993
Status: Inactive
ASTM D6176M
Title:
Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric)
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D3457
Title:
Standard Test Method for Preparation of Methyl Esters from Fatty Acids for Determination of Fatty Acid Composition by Gas-Liquid Chromatography
Organization: ASTM
Year: 1987
Status: Inactive
ASTM A452
Title:
Standard Specification for Centrifugally Cast Austenitic Steel Cold-Wrought Pipe for High-Temperature Service
Organization: ASTM
Year: 1988
Status: Inactive
ASTM C170
Title:
Standard Test Method for Compressive Strength of Dimension Stone
Organization: ASTM
Year: 2006
Status: Inactive
ASTM E1713
Title:
Standard Specification for Transferring Digital Waveform Data between Independent Computer Systems
Organization: ASTM
Year: 1995
Status: Inactive
ASTM E368
Title:
Chemical Analysis of Ferromolybdenum, Methods for
Organization: ASTM
Year: 1983
Status: Inactive
ASTM F1715
Title:
Standard Guide for Wear Assessment of Prosthetic Knee Designs in Simulator Devices
Organization: ASTM
Year: 2000
Status: Inactive
ASTM A667
Title:
STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST DUAL METAL (GRAY AND WHITE CAST IRON) CYLINDERS (R 1982)
Organization: ASTM
Year: 1972
Status: Inactive
ASTM D3507
Title:
Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating between Heartwood and Sapwood
Organization: ASTM
Year: 1997
Status: Inactive
ASTM E347
Title:
Standard Test Method for Ash in Polybasic Acids
Organization: ASTM
Year: 1998
Status: Inactive
ASTM PS46
Title:
Provisional Standard Practice for Collection of Surface Dust by Air Sampling Pump Vacuum Technique for Subsequent Lead Determination
Organization: ASTM
Year: 1996
Status: Inactive
ASTM D3432
Title:
Standard Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by Gas Chromatography
Organization: ASTM
Year: 1989
Status: Inactive
UOP828
Title:
TOTAL AMINE IN SOLUTIONS
Organization: ASTM
Year: 1981
Status: Active
ASTM D4237
Title:
Standard Test Methods for Rubber Hose Used for Steam Applications
Organization: ASTM
Year: 1990
Status: Inactive
ASTM D4224
Title:
Standard Test Method for Anionic Detergent by Para-Toluidine Hydrochloride
Organization: ASTM
Year: 1989
Status: Inactive
UOP670
Title:
CARBON STRUCTURE OF C7 AND LOWER BOILING HYDROCARBONS IN OLEFINIC SAMPLES BY HYDROGENATION AND CAPILLARY COLUMN GAS CHROMATOGRAPHY
Organization: ASTM
Status: Inactive
ASTM C982
Title:
Standard Guide for Selecting Components for Energy-Dispersive X-Ray Fluorescence (XRF) Systems
Organization: ASTM
Year: 2003
Status: Inactive
ASTM A326
Title:
STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED) HIGH TENSILE STEEL TELEPHONE AND TELEGRAPH LINE WIRE
Organization: ASTM
Status: Inactive
ASTM D6359
Title:
Standard Specification for Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments
Organization: ASTM
Year: 1999
Status: Inactive
ASTM D2858
Title:
Standard Test Method for Thermal Conductivity of Electrical Grade Magnesium Oxide
Organization: ASTM
Year: 1970
Status: Inactive
ASTM E880
Title:
Standard Guide for Evaluating the Usefulness of Herbicides on Corn (All Types)
Organization: ASTM
Year: 1996
Status: Inactive
ASTM A725
Title:
STANDARD SPECIFICATION FOR FLAT-ROLLED, GRAIN-ORIENTED, SILICON IRON ELECTRICAL STEEL, FULLY PROCESSED TYPES 27H076, 30H083, 35H094
Organization: ASTM
Year: 1984
Status: Inactive
ASTM D4389
Title:
Standard Specification for Finished Glass Fabrics Woven from Rovings
Organization: ASTM
Year: 2004
Status: Inactive
ASTM A413
Title:
STANDARD SPECIFICATION FOR CARBON STEEL CHAIN
Organization: ASTM
Year: 1980
Status: Inactive
ASTM E2010
Title:
Standard Test Method for Positive Pressure Fire Tests of Window Assemblies
Organization: ASTM
Year: 2001
Status: Inactive
ASTM C273
Title:
Standard Test Method for Shear Properties of Sandwich Core Materials
Organization: ASTM
Year: 2000
Status: Inactive
ASTM F1628
Title:
Standard Specification for Labeling and Marking of Cuffed and Uncuffed Tracheal Tubes and Related Treatments Intended for Use During Laser Surgery
Organization: ASTM
Year: 1995
Status: Inactive
ASTM E1442
Title:
Standard Practice for Highway-Traffic Monitoring
Organization: ASTM
Year: 1994
Status: Inactive
ASTM F469
Title:
STANDARD PRACTICE FOR ASSESSMENT OF COMPATIBILITY OF NONPOROUS POLYMERIC MATERIALS FOR SURGICAL IMPLANTS WITH REGARD TO EFFECT OF MATERIALS ON TISSUE
Organization: ASTM
Year: 1978
Status: Inactive
ASTM D563
Title:
Standard Test Method for Phthalic Anhydride Content of Alkyd Resins and Resin Solutions
Organization: ASTM
Year: 1988
Status: Inactive
ASTM D878
Title:
Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D2630
Title:
STANDARD TEST METHOD FOR RUBBER PROPERTY - ADHESION TO FABRICS (STRAP PEEL TEST) (E1-1987)
Organization: ASTM
Year: 1983
Status: Inactive
ASTM A720
Title:
Standard Test Method for Ductility of Nonoriented Electrical Steel
Organization: ASTM
Year: 1997
Status: Inactive
ASTM C42
Title:
Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
Organization: ASTM
Year: 1994
Status: Inactive
ASTM F1916
Title:
Standard Specifications for Selecting Chain Link Barrier Systems with Coated Chain Link Fence Fabric and Round Posts for Detention Applications
Organization: ASTM
Year: 1998
Status: Inactive
ASTM F848
Title:
STANDARD TEST METHOD FOR DETERMINING THE LATTICE CONSTANT OF SINGLE CRYSTAL GADOLINIUM GALLIUM GARNET
Organization: ASTM
Year: 1983
Status: Inactive
ASTM A785
Title:
STANDARD SPECIFICATION FOR ALUMINUM-ZINC ALLOY-COATED WIRE STRAND
Organization: ASTM
Year: 1981
Status: Inactive
ASTM A521
Title:
Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
Organization: ASTM
Year: 2003
Status: Inactive
ASTM PS60
Title:
Provisional Safety Specification for Drawstrings on Children's Upper Outerwear
Organization: ASTM
Year: 1997
Status: Inactive
ASTM C605
Title:
Standard Test Method for Reheat Change of Fireclay Nozzles and Sleeves
Organization: ASTM
Year: 1992
Status: Inactive
ASTM C1119
Title:
Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
Organization: ASTM
Year: 1990
Status: Inactive
ASTM F1305
Title:
Standard Guide for Classification of Amusement Ride and Device Related Injuries and Illnesses
Organization: ASTM
Year: 1994
Status: Inactive
ASTM E1651
Title:
Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry
Organization: ASTM
Year: 1994
Status: Inactive
ASTM E378
Title:
Standard Test Method for Spectrographic Analysis of Silver by the Powder Technique
Organization: ASTM
Year: 1997
Status: Inactive
ASTM E489
Title:
Standard Test Method for Tensile Strength Properties of Metal Connector Plates
Organization: ASTM
Year: 1992
Status: Inactive
ASTM F687
Title:
STANDARD PRACTICE FOR ON -SITE CALIBRATION OF LIQUIDBORNE AUTOMATIC PARTICLE COUNTERS WITH ADJUSTABLE INDIVIDUAL SIZE THRESHOLDS
Organization: ASTM
Year: 1980
Status: Inactive
ASTM F805
Title:
Standard Test Method for Photoplate Surface Flatness by Interferometric Noncontact Technique
Organization: ASTM
Year: 1983
Status: Inactive
ASTM D2015
Title:
Standard Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter
Organization: ASTM
Year: 2000
Status: Inactive
ASTM E1864
Title:
Standard Practice for Evaluating Quality Systems of Organizations Conducting Facility and Hazard Assessments for Lead in Paint, Dust, Airborne Particulate, and Soil in and Around Buildings and Rela...
Organization: ASTM
Year: 2002
Status: Inactive
ASTM E1929
Title:
Standard Practice for Assessment of Certification Programs for Environmental Professionals: Accreditation Criteria
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D998
Title:
Standard Test Method for Penetration of Liquids into Submerged Loaded Shipping Containers
Organization: ASTM
Year: 1994
Status: Inactive
UOP878
Title:
POTASSIUM IN CATALYSTS BY ATOMIC ABSORPTION
Organization: ASTM
Year: 1987
Status: Inactive
ASTM D5784
Title:
Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
Organization: ASTM
Year: 1995
Status: Inactive
ASTM F301
Title:
Standard Practice for Open Bottle Tap Sampling of Liquid Streams
Organization: ASTM
Year: 1991
Status: Inactive
ASTM D6309
Title:
Standard Guide for Development of Standard Data Records for Computerization of Mechanical Test Data for High-Modulus Fiber-Reinforced Composite Materials
Organization: ASTM
Year: 1995
Status: Inactive
ASTM A616
Title:
RAIL-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT, SPEC. FOR
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D3593
Title:
Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography-GPC) Using Universal ...
Organization: ASTM
Year: 1980
Status: Inactive
ASTM D6932
Title:
Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
Organization: ASTM
Year: 2004
Status: Inactive
ASTM F392
Title:
Standard Test Method for Flex Durability of Flexible Barrier Materials
Organization: ASTM
Year: 1993
Status: Inactive
ASTM E1536
Title:
Standard Practice for Detection of Mycoplasma Contamination of Bovine Serum by the Large Volume Method
Organization: ASTM
Year: 2000
Status: Inactive
ASTM E1639
Title:
Standard Guide for Functional Requirements of Clinical Laboratory Information Management Systems
Organization: ASTM
Year: 2001
Status: Inactive
ASTM C1381
Title:
Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D5962
Title:
Standard Guide for Maintaining Unqualified Coatings (Paints) within Level I Areas of a Nuclear Power Facility
Organization: ASTM
Year: 1996
Status: Inactive
ASTM E2255
Title:
Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
Organization: ASTM
Year: 2004
Status: Inactive
ASTM E96
Title:
Standard Test Methods for Water Vapor Transmission of Materials
Organization: ASTM
Year: 2000
Status: Inactive
ASTM B858M
Title:
Standard Test Method for Determination of Susceptibility to Stress Corrosion Cracking in Copper Alloys Using an Ammonia Vapor Test
Organization: ASTM
Year: 1995
Status: Inactive
ASTM F1465
Title:
Standard Guide for Selection of Security Control Systems
Organization: ASTM
Year: 2003
Status: Inactive
ASTM D4210
Title:
Standard Practice for Intralaboratory Quality Control Procedures and a Discussion on Reporting Low-Level Data
Organization: ASTM
Year: 1989
Status: Inactive
UOP682
Title:
TOTAL CYANIDE IN REFINERY WATERS BY VISIBLE SPECTROPHOTOMETRY
Organization: ASTM
Year: 1984
Status: Active
ASTM D2179
Title:
Standard Specification for Combination Bar Soap
Organization: ASTM
Status: Inactive
ASTM B36
Title:
STANDARD SPECIFICATION FOR BRASS PLATE, SHEET, STRIP, AND ROLLED BAR
Organization: ASTM
Year: 1991
Status: Inactive
ASTM D669
Title:
Standard Test Method for Dissipation Factor and Permittivity Parallel with Laminations of Laminated Sheet and Plate Materials
Organization: ASTM
Year: 2003
Status: Inactive
ASTM B93
Title:
STANDARD SPECIFICATION FOR MAGNESIUM ALLOYS IN INGOT FORM FOR SAND CASTINGS, PERMANENT MOLD CASTINGS, AND DIE CASTINGS (E1-1989)
Organization: ASTM
Year: 1988
Status: Inactive
ASTM F572
Title:
Standard Practice for Application of Film Security Cameras in Financial Institutions
Organization: ASTM
Year: 1989
Status: Inactive
ASTM E2359
Title:
Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
Organization: ASTM
Year: 2006
Status: Inactive
ASTM B350
Title:
Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application
Organization: ASTM
Year: 1993
Status: Inactive
ASTM F25
Title:
Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
Organization: ASTM
Year: 2004
Status: Inactive
ASTM D3979
Title:
STANDARD TEST METHOD FOR PARTICULATE MATTER IN TRICHLOROTRIFLUOROETHANE
Organization: ASTM
Year: 1986
Status: Inactive
ASTM ES40
Title:
Emergency Standard Practice for Alternative Procedures for the Assessment of Buried Steel Tanks Prior to the Addition of Cathodic Protection
Organization: ASTM
Year: 1994
Status: Inactive
ASTM A568M
Title:
STANDARD SPECIFICATION FOR GENERAL REQUIREMENT FOR STEEL, CARBON AND HIGH-STRENGTH LOW-ALLOY HOT-ROLLED SHEET AND COLD-ROLLED SHEET (METRIC)
Organization: ASTM
Year: 1990
Status: Inactive
ASTM E118
Title:
Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
Organization: ASTM
Year: 1989
Status: Inactive
ASTM F738
Title:
Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
Organization: ASTM
Year: 1990
Status: Inactive
ASTM B171
Title:
Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers
Organization: ASTM
Year: 1995
Status: Inactive
ASTM E835M
Title:
STANDARD GUIDE FOR DIMENSIONAL COORDINATION OF STRUCTURAL CLAY UNITS, CONCRETE MASONRY UNITS, AND CLAY FLUE LININGS (METRIC)
Organization: ASTM
Year: 1981
Status: Inactive
ASTM C599
Title:
Standard Specification for Conical Process Glass Pipe and Fittings
Organization: ASTM
Year: 1991
Status: Inactive
ASTM STP1167
Title:
Wear Testing of Advanced Materials
Organization: ASTM
Year: 1992
Status: Active
ASTM F361
Title:
STANDARD PRACTICE FOR ASSESSMENT OF COMPATIBILITY OF METALLIC MATERIALS FOR SURGICAL IMPLANTS WITH RESPECT TO EFFECT OF MATERIALS ON TISSUE
Organization: ASTM
Year: 1980
Status: Inactive
ASTM F821
Title:
Standard Specification for Doors and Frames, Steel, Interior, Marine
Organization: ASTM
Year: 1995
Status: Inactive
ASTM B341M
Title:
Standard Specification for Aluminum-Coated (Aluminized) Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR/AZ) (Metric)
Organization: ASTM
Year: 1993
Status: Inactive
ASTM D2428
Title:
Standard Test Method for Simulative Recirculating System Testing of Aerospace Hydraulic Fluids
Organization: ASTM
Year: 1992
Status: Inactive
ASTM F2319
Title:
Standard Specification for Fixed Wing Basic Life Support, Advanced Life Support, and Specialized Medical Support Air Ambulances
Organization: ASTM
Year: 2004
Status: Inactive
ASTM B124M
Title:
Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes [Metric]
Organization: ASTM
Year: 1996
Status: Inactive
ASTM F1631
Title:
Standard Test Method for Impact Attenuation Properties of Body Padding and Protective Wear for the Sport of Fencing
Organization: ASTM
Year: 1995
Status: Inactive
UOP700
Title:
FREE SULFUR IN PETROLEUM DISTILLATES AND LPG BY THE AC POLAROGRAPH
Organization: ASTM
Year: 1970
Status: Inactive
ASTM E2165
Title:
Standard Practice for Establishing an Uncertainty Budget for the Chemical Analysis of Metals, Ores, and Related Materials
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D3759
Title:
Standard Test Method for Tensile Strength and Elongation of Pressure-Sensitive Tapes
Organization: ASTM
Year: 1996
Status: Inactive
ASTM PS39
Title:
Provisional Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electric Insulation Varnishes
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D319
Title:
Standard Specification for Amyl Alcohol (Synthetic)
Organization: ASTM
Year: 2004
Status: Inactive
ASTM D2932
Title:
STANDARD GUIDE FOR TESTING EXTERIOR SOLVENT-REDUCIBLE HOUSE AND TRIM COATINGS (R 1988) (E1-1988)
Organization: ASTM
Year: 1980
Status: Inactive
UOP495
Title:
AROMATICS IN MOLEX PROCESS n-PARAFFIN PRODUCTS BY ULTRAVIOLET SPECTROPHOTOMETRY
Organization: ASTM
Year: 2003
Status: Active
ASTM E607
Title:
Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere
Organization: ASTM
Year: 2002
Status: Inactive
ASTM F1103
Title:
Standard Test Method for Materials Response to Flame - 45 Degrees (for Aerospace Vehicles)
Organization: ASTM
Year: 1993
Status: Inactive
ASTM D7067
Title:
Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane
Organization: ASTM
Year: 2005
Status: Inactive
ASTM D756
Title:
Standard Practice for Determination of Weight and Shape Changes of Plastics under Accelerated Service Conditions
Organization: ASTM
Year: 1993
Status: Inactive
ASTM D2016
Title:
Standard Test Methods for MOISTURE CONTENT OF WOOD
Organization: ASTM
Year: 1974
Status: Inactive
ASTM D3799
Title:
Standard Test Method for Purity of Styrene by Freezing Point Method
Organization: ASTM
Year: 1995
Status: Inactive
ASTM E425
Title:
STANDARD TERMINOLOGY RELATING TO LEAK TESTING
Organization: ASTM
Year: 1990
Status: Inactive
ASTM D995
Title:
Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D3779
Title:
Standard Performance Specification for Women's and Girls' Woven Rainwear and All-Purpose, Water-Repellent Coat Fabrics
Organization: ASTM
Year: 2002
Status: Inactive
ASTM D3417
Title:
Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC)
Organization: ASTM
Year: 1999
Status: Inactive
ASTM F1082
Title:
Standard Practice for TiresDetermining Precision for Test Method Standards
Organization: ASTM
Year: 2000
Status: Inactive
ASTM F2139
Title:
Standard Test Method for Measuring Nitrogen Concentration in Silicon Substrates by Secondary Ion Mass Spectrometry
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D5081
Title:
Standard Test Method for Aggregate Layer Hiding Power
Organization: ASTM
Year: 1990
Status: Inactive
ASTM E1055
Title:
Standard Test Method for Evaluation of Eye Irritation in Albino Rabbits
Organization: ASTM
Year: 1999
Status: Inactive
ASTM D6653
Title:
Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
Organization: ASTM
Year: 2001
Status: Inactive
ASTM F1053
Title:
STANDARD GUIDE FOR STEEL HULL CONSTRUCTION TOLERANCES
Organization: ASTM
Year: 1987
Status: Inactive
ASTM E842
Title:
STANDARD SPECIFICATION FOR LAWN BUILDINGS
Organization: ASTM
Year: 1982
Status: Inactive
ASTM D1396
Title:
Standard Test Methods for Chemical Analysis of Poly(Vinyl Butyral)
Organization: ASTM
Year: 1992
Status: Inactive
ASTM F676
Title:
Standard Test Method for Measuring Unsaturated TTL Sink Current
Organization: ASTM
Year: 1997
Status: Inactive
ASTM E813
Title:
Standard Test Method for Jic, a Measure of Fracture Toughness
Organization: ASTM
Year: 1989
Status: Inactive
ASTM D6054
Title:
Standard Practice for Conditioning Electrical Insulating Materials for Testing
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D1390
Title:
STANDARD TEST METHOD FOR RUBBER PROPERTY - STRESS RELAXATION IN COMPRESSION
Organization: ASTM
Year: 1976
Status: Inactive
ASTM A963/A963M
Title:
Standard Specification for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D5875
Title:
Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D1936
Title:
STANDARD TEST METHOD FOR THERMAL STABILITY OF CHLORINATED AROMATIC HYDROCARBONS (ASKARELS)
Organization: ASTM
Status: Inactive
ASTM PS42
Title:
Provisional Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres
Organization: ASTM
Year: 1997
Status: Inactive
ASTM C446
Title:
Standard Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes
Organization: ASTM
Year: 1988
Status: Inactive
ASTM A808/A808M
Title:
Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness
Organization: ASTM
Year: 2000
Status: Inactive
ASTM D4484
Title:
STANDARD TEST METHOD FOR INORGANIC PARTICLES IN MARINE RESIDUAL FUEL OILS BY SELECTIVE CENTRIFUGAL SEPARATION
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D5082
Title:
Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
Organization: ASTM
Year: 1999
Status: Inactive
ASTM F947
Title:
Standard Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D1758
Title:
Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes
Organization: ASTM
Year: 2006
Status: Inactive
ASTM D4911
Title:
Standard Tolerances for Yarns Made of Man-Made Fibers and Spun on the Parallel Worsted or Modified Worsted System
Organization: ASTM
Year: 1994
Status: Inactive
ASTM D6114
Title:
Standard Specification for Asphalt-Rubber Binder
Organization: ASTM
Year: 1997
Status: Inactive
ASTM PS13
Title:
Provisional Standard Test Method for Performance Testing of Excess Flow Valves
Organization: ASTM
Year: 1995
Status: Inactive
ASTM E2053
Title:
Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Metals, Ores, and Related Materials
Organization: ASTM
Year: 2000
Status: Inactive
ASTM B96M
Title:
Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels (Metric)
Organization: ASTM
Year: 1993
Status: Inactive
F20
Title:
STANDARD SPECIFICATION FOR HIGH CONDUCTIVITY COMPOSITE ALUMINUM-STEEL -COPPER STRIP FOR ELECTRON TUBES
Organization: ASTM
Status: Inactive
ASTM E856
Title:
Standard Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel
Organization: ASTM
Year: 1983
Status: Inactive
ASTM E994
Title:
Standard Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D4320
Title:
Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Design Strength Parameters
Organization: ASTM
Year: 2004
Status: Inactive
ASTM D1680
Title:
STANDARD METHODS OF TESTING RUBBER HOSE FOR AUTOMOTIVE AIR CONDITIONING SYSTEMS
Organization: ASTM
Year: 1981
Status: Inactive
ASTM E447
Title:
Standard Test Methods for Compressive Strength of Laboratory Constructed Masonry Prisms
Organization: ASTM
Year: 1997
Status: Inactive
ASTM E1541
Title:
Standard Practice for Specifying and Matching Color Using the Colorcurve System
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D1952
Title:
Standard Test Method for Quantitative Determination of Break in Drying Oils
Organization: ASTM
Year: 1986
Status: Inactive
ASTM C1133
Title:
Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning
Organization: ASTM
Year: 2003
Status: Inactive
ASTM F348
Title:
STANDARD SPECIFICATION FOR HEX-HEAD BOLTS (THORTON TYPE) MADE FROM COBALT-CHROMIUM ALLOY
Organization: ASTM
Year: 1971
Status: Inactive
ASTM D729
Title:
Standard Specification for Vinylidene Chloride Molding Compounds
Organization: ASTM
Year: 1995
Status: Inactive
ASTM C192
Title:
STANDARD PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY (AASHTO T126)
Organization: ASTM
Year: 1990
Status: Inactive
ASTM D5569
Title:
Standard Test Method for the Determination of Static Flow of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements
Organization: ASTM
Year: 1994
Status: Inactive
ASTM D3133
Title:
Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D1658
Title:
STANDARD TEST METHOD FOR CARBON NUMBER DISTRIBUTION OF AROMATIC COMPOUNDS IN NAPHTHAS BY MASS SPECTROMETRY
Organization: ASTM
Year: 1980
Status: Inactive
ASTM E1751
Title:
Standard Guide for Temperature Electromotive Force (EMF) Tables for Non-Letter Designated Thermocouple Combinations
Organization: ASTM
Year: 2000
Status: Inactive
ASTM E560
Title:
Standard Practice for Extrapolating Reactor Vessel Surveillance Dosimetry Results, E 706(IC)
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D4225
Title:
Standard Specification for Styrene-Butadiene Sheeting
Organization: ASTM
Year: 2003
Status: Inactive
ASTM D4034
Title:
Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Woven Upholstery Fabrics
Organization: ASTM
Year: 1992
Status: Inactive
ASTM F965
Title:
Standard Specification for Rigid Laryngoscopes for Tracheal Intubation - Hook-On Fittings for Laryngoscope Handles and Blades with Lamps
Organization: ASTM
Year: 1999
Status: Inactive
ASTM A535
Title:
Standard Specification for Special-Quality Ball and Roller Bearing Steel
Organization: ASTM
Year: 1985
Status: Inactive
ASTM A165
Title:
STANDARD SPECIFICATION FOR ELECTRODEPOSITED COATINGS OF CADMIUM ON STEEL
Organization: ASTM
Year: 1980
Status: Inactive
ASTM D2785
Title:
STANDARD TEST METHOD FOR TRACE QUANTITIES OF TOTAL SULFUR (WICKBOLD AND BECKMAN COMBUSTION APPARATUS)
Organization: ASTM
Year: 1980
Status: Inactive
ASTM D4184
Title:
STANDARD SPECIFICATION FOR REINFORCED THERMOSETTING RESIN (RTRP) SEWER PIPE
Organization: ASTM
Year: 1982
Status: Inactive
ASTM B531
Title:
Standard Specification for Aluminum-Alloy 5005 Drawing Stock for Electrical Purposes
Organization: ASTM
Year: 1990
Status: Inactive
ASTM F1343
Title:
Standard Specification for Anesthetic Gas Scavenging Systems - Transfer and Receiving Systems
Organization: ASTM
Year: 2002
Status: Inactive
UOP888
Title:
PRECISION STATEMENTS IN UOP METHODS
Organization: ASTM
Year: 1988
Status: Inactive
ASTM D6269
Title:
Test Method for Solidification Point of p-Xylene
Organization: ASTM
Year: 1998
Status: Inactive
UOP969
Title:
PERMANGANATE FADING FOR ACETIC ACID
Organization: ASTM
Year: 2000
Status: Inactive
ASTM F1420
Title:
Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Management Techniques
Organization: ASTM
Year: 2001
Status: Inactive
ASTM A584
Title:
Standard Specification for Aluminum-Coated Steel Woven Wire Fence Fabric
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D4842
Title:
Standard Test Method for Determining the Resistance of Solid Wastes to Freezing and Thawing
Organization: ASTM
Year: 1990
Status: Inactive
ASTM B627
Title:
Standard Test Method for Electrolytic Corrosion Testing (EC Test)
Organization: ASTM
Year: 1984
Status: Inactive
ASTM D3945
Title:
Standard Test Methods for Shear Stability of Polymer-Containing Fluids Using a Diesel Injector Nozzle
Organization: ASTM
Year: 1993
Status: Inactive
ASTM C1040
Title:
Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
Organization: ASTM
Year: 2005
Status: Inactive
ASTM D601
Title:
Standard Specification for Oiticica Oil (Permanently Liquid)
Organization: ASTM
Year: 1987
Status: Inactive
ASTM D1674
Title:
STANDARD METHODS OF TESTING POLYMERIZABLE EMBEDDING COMPOUNDS USED FOR ELECTRICAL INSULATION
Organization: ASTM
Status: Inactive
ASTM E379
Title:
STANDARD SPECIFICATION FOR APPARATUS FOR DIRECT MICRODETERMINATION OF OXYGEN IN ORGANIC COMPOUNDS
Organization: ASTM
Status: Inactive
ASTM B642
Title:
STANDARD SPECIFICATION FOR WELDED COPPER ALLOY UNS NO. C21000 WATER TUBE (E1-1989) (WITHDRAWN - 1994)
Organization: ASTM
Year: 1988
Status: Inactive
ASTM E1595
Title:
Standard Practice for Evaluating the Performance of Mechanical Testing Laboratories
Organization: ASTM
Year: 1998
Status: Inactive
ASTM C1020
Title:
Standard Matrix for Light Water Reactor Fuel Reprocessing
Organization: ASTM
Year: 1984
Status: Inactive
ASTM E1039
Title:
Standard Test Method for Calibration of Silicon Non-Concentrator Photovoltaic Primary Reference Cells Under Global Irradiation
Organization: ASTM
Year: 1999
Status: Inactive
ASTM B654
Title:
Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
Organization: ASTM
Year: 2003
Status: Inactive
ASTM B609
Title:
Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
Organization: ASTM
Year: 1997
Status: Inactive
ASTM F525
Title:
Standard Test Method for Measuring Resistivity of Silicon Wafers Using a Spreading Resistance Probe
Organization: ASTM
Year: 2000
Status: Inactive
ASTM D571
Title:
STANDARD METHOD FOR RUBBER HOSE FOR AUTOMOTIVE HYDRAULIC BRAKE SYSTEMS
Organization: ASTM
Year: 1976
Status: Inactive
ASTM D6043
Title:
Standard Guide for Selection of Permanent and Durable Artist's Paper
Organization: ASTM
Year: 2001
Status: Inactive
ASTM C971
Title:
Standard Guide for Selection and Application of Insulation Systems for Heating, Ventilating, and Air Conditioning Duct Work
Organization: ASTM
Year: 1982
Status: Inactive
ASTM E1088
Title:
Standard Definitions of Terms Relating to Atomizing Devices
Organization: ASTM
Year: 1992
Status: Inactive
UOP381
Title:
TRACES OF SULFUR IN LIQUEFIED PETROLEUM GASES BY THE NICKEL REDUCTION METHOD
Organization: ASTM
Status: Inactive
ASTM B412
Title:
Standard Specification for Copper-Nickel-Silicon Alloy Wire
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D1433
Title:
STANDARD TEST METHOD FOR RATE OF BURNING AND/OR EXTENT AND TIME OF BURNING OF FLEXIBLE THIN PLASTIC SHEETING SUPPORTED ON A 45-DEG INCLINE
Organization: ASTM
Year: 1977
Status: Inactive
ASTM E20
Title:
STANDARD PRACTICE FOR PARTICLE SIZE ANALYSIS OF PARTICULATE SUBSTANCES IN THE RANGE OF 0.2 TO 75 MICROMETERS BY OPTICAL MICROSCOPY
Organization: ASTM
Year: 1985
Status: Inactive
ASTM B550
Title:
Standard Specification for Zirconium and Zirconium Alloy Bar and Wire
Organization: ASTM
Year: 1992
Status: Inactive
ASTM PS62
Title:
Provisional Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers
Organization: ASTM
Year: 1997
Status: Inactive
UOP972
Title:
ALUMINUM, SILICON AND SILVER IN ACETIC ACID BY ICP-OES
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D645
Title:
STANDARD TEST METHOD FOR THICKNESS OF PAPER AND PAPERBOARD
Organization: ASTM
Year: 1992
Status: Inactive
ASTM D3086
Title:
Standard Test Method for Organochlorine Pesticides in Water
Organization: ASTM
Year: 1985
Status: Inactive
ASTM ES28
Title:
Emergency Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
Organization: ASTM
Year: 1994
Status: Inactive
ASTM D4121
Title:
STANDARD PRACTICE FOR PHOTOGRAPHIC DOCUMENTATION OF COATING AND LINING FAILURES AND DEFECTS
Organization: ASTM
Year: 1982
Status: Inactive
ASTM D5944
Title:
Standard Guide for Describing the General Principles for Determining the Temperature of Deflection of Plastics under Load
Organization: ASTM
Year: 1996
Status: Inactive
ASTM D1382
Title:
STANDARD TEST METHOD FOR SUSCEPTIBILITY OF DRY ADHESIVE FILMS TO ATTACK BY ROACHES
Organization: ASTM
Status: Inactive
ASTM F569
Title:
STANDARD TEST METHOD FOR FILTERABILITY INDEX OF REAGENT-GRADE WATER AND HIGH-PURITY WATERS FOR MICROELECTRONIC DEVICE PROCESSING
Organization: ASTM
Year: 1978
Status: Inactive
ASTM D4023
Title:
Standard Terminology Relating to Humidity Measurements
Organization: ASTM
Year: 1982
Status: Inactive
ASTM D1540
Title:
STANDARD PRACTICE FOR EFFECT OF CHEMICAL AGENTS ON ORGANIC FINISHES USED IN THE TRANSPORTATION INDUSTRY
Organization: ASTM
Year: 1982
Status: Inactive
ASTM F1152
Title:
Standard Test Method for Dimensions of Notches on Silicon Wafers
Organization: ASTM
Year: 2002
Status: Inactive
ASTM D4999
Title:
STANDARD TEST METHOD FOR EVALUATION OF FLUIDS FOR EFFECTS ON FRICTION OF WET, BRONZE-FACED, FRICTION BRAKES
Organization: ASTM
Year: 1989
Status: Inactive
ASTM F931
Title:
Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response - Seagrasses
Organization: ASTM
Year: 1985
Status: Inactive
ASTM F1724
Title:
Standard Test Method for Measuring Surface Metal Contamination of Polycrystalline Silicon by Acid Extraction-Atomic Absorption Spectroscopy
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D2288
Title:
Standard Test Method for Weight Loss of Plasticizers on Heating
Organization: ASTM
Year: 1997
Status: Inactive
ASTM A607
Title:
Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D363
Title:
Standard Specification for Tricresyl Phosphate
Organization: ASTM
Year: 1990
Status: Inactive
ASTM D6860
Title:
Proposed Standard Tables of Body Measurements for Boys, Sizes 6 to 24 Husky
Organization: ASTM
Year: 2003
Status: Inactive
ASTM C28
Title:
Standard Specification for Gypsum Plasters
Organization: ASTM
Year: 1996
Status: Inactive
ASTM F343
Title:
Standard Specification for Counterlocking Screws (McLaughlin Type) (Discontinued - 1993)
Organization: ASTM
Year: 1971
Status: Inactive
ASTM D427
Title:
Standard Test Method for Shrinkage Factors of Soils by the Mercury Method
Organization: ASTM
Year: 2004
Status: Inactive
ASTM A619/A619M
Title:
Standard Specification for Non-Killed Forming Steel (NKFS) Sheet, Carbon, Cold-Rolled
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D2575
Title:
Standard Methods of Testing Polymerized Fatty Acids
Organization: ASTM
Year: 1970
Status: Inactive
ASTM A289
Title:
Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
Organization: ASTM
Year: 1994
Status: Inactive
ASTM E1759
Title:
Standard Test Method for Isoaspartic Acid in Proteins: Method for the Determination of Asparagine Deamidation Products
Organization: ASTM
Year: 1995
Status: Inactive
ASTM F553
Title:
Standard Test Method for Carbon Paper and Carbon Film Durability
Organization: ASTM
Year: 1992
Status: Inactive
ASTM D43
Title:
Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing,and Waterproofing
Organization: ASTM
Year: 2000
Status: Inactive
UOP394
Title:
AROMATICS IN HYDROCARBONS BY GAS CHROMATOGRAPHY
Organization: ASTM
Year: 1985
Status: Inactive
ASTM F1437
Title:
Standard Practice for Inclined Cargo Tank Ladders
Organization: ASTM
Year: 2006
Status: Inactive
ASTM C1004
Title:
Standard Matrix for LWR Spent Fuel Receiving and Storage
Organization: ASTM
Year: 1984
Status: Inactive
ASTM PS97
Title:
Provisional Standard Safety Guide for Consumer Recreational Use of Fun-Karts
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D1561
Title:
Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
Organization: ASTM
Year: 1992
Status: Inactive
ASTM D6554
Title:
Standard Perormance Specification for 100% Cotton Denim Fabrics
Organization: ASTM
Year: 2000
Status: Inactive
ASTM F751
Title:
Standard Test Method for Measuring Particle Size of Wide-Size Range Dry Toners
Organization: ASTM
Year: 1983
Status: Inactive
ASTM F317
Title:
Standard Test Method for Liquid Flow Rate of Membrane Filters
Organization: ASTM
Year: 1972
Status: Inactive
ASTM D5005
Title:
STANDARD TEST METHOD FOR EVALUATION OF FLUIDS FOR EFFECTS ON FRICTION AND WEAR OF WET CLUTCHES
Organization: ASTM
Year: 1989
Status: Inactive
ASTM D2947
Title:
Standard Test Method for Screen Analysis of Asbestos Fibers
Organization: ASTM
Year: 1988
Status: Inactive
ASTM F804
Title:
Standard Practice for Producing Spin Coating Resist Thickness Curves
Organization: ASTM
Year: 1983
Status: Inactive
ASTM D2316
Title:
STANDARD RECOMMENDED PRACTICE FOR INSTALLING BITUMINIZED FIBER DRAIN AND SEWER PIPE
Organization: ASTM
Year: 1975
Status: Inactive
ASTM E451
Title:
STANDARD PRACTICE FOR TESTING PAVEMENT POLISHING IN THE LABORATORY (FULL-SCALE WHEEL METHOD)
Organization: ASTM
Year: 1981
Status: Inactive
ASTM D846
Title:
STANDARD SPECIFICATION FOR TEN-DEGREE XYLENE
Organization: ASTM
Year: 1984
Status: Inactive
ASTM E1375
Title:
Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers
Organization: ASTM
Year: 1990
Status: Inactive
ASTM E1240
Title:
Standard Test Method for Performance Testing of Wind Energy Conversion Systems
Organization: ASTM
Year: 1988
Status: Inactive
ASTM D5308
Title:
Standard Test Methods for Semi-Flexible Cellular Urethanes for Automotive and Similar Energy Absorption Applications
Organization: ASTM
Year: 1992
Status: Inactive
ASTM D2870
Title:
Standard Test Method for Gel Time of Tar Acids
Organization: ASTM
Year: 1986
Status: Inactive
ASTM D29
Title:
Standard Test Methods for Sampling and Testing Lac Resins
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D1462
Title:
Standard Specification for Refined Soybean Oil
Organization: ASTM
Year: 1992
Status: Inactive
ASTM D5119
Title:
Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine
Organization: ASTM
Year: 2002
Status: Inactive
ASTM D5734
Title:
Standard Test Method for Tearing Strength of Nonwoven Fabrics by Falling-Pendulum (Elmendorf) Apparatus
Organization: ASTM
Year: 1995
Status: Inactive
ASTM F2086
Title:
Standard Test Method for Pass Through Flux of Circular Magnetic Sputtering Targets, Method 2
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D312
Title:
Standard Specification for Asphalt Used in Roofing
Organization: ASTM
Year: 2000
Status: Inactive
ASTM D4011
Title:
Standard Specification for Lotion Soap
Organization: ASTM
Year: 1981
Status: Inactive
ASTM PS20
Title:
Provisional Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings Made Using Recycled Polyethylene Materials
Organization: ASTM
Year: 1995
Status: Inactive
ASTM F1474
Title:
Standard Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D75
Title:
Standard Practice for Sampling Aggregates
Organization: ASTM
Year: 2003
Status: Inactive
ASTM D1962
Title:
Standard Test Method for Saponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty Acids
Organization: ASTM
Year: 1985
Status: Inactive
ASTM E2096
Title:
Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing
Organization: ASTM
Year: 2005
Status: Inactive
ASTM E1430
Title:
Standard Guide for Using Release Detection Devices with Underground Storage Tanks
Organization: ASTM
Year: 1991
Status: Inactive
ASTM F1259M
Title:
Standard Guide for Design of Flat, Straight-Line Test Structures for Detecting Metallization Open-Circuit or Resistance-Increase Failure Due to Electromigration [Metric]
Organization: ASTM
Year: 1996
Status: Inactive
ASTM E828
Title:
Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis
Organization: ASTM
Year: 1981
Status: Inactive
ASTM F674
Title:
Standard Practice for Preparing Silicon for Spreading Resistance Measurements
Organization: ASTM
Year: 1992
Status: Inactive
ASTM A611
Title:
Standard Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled
Organization: ASTM
Year: 1997
Status: Inactive
ASTM A395M
Title:
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures (Metric)
Organization: ASTM
Year: 1988
Status: Inactive
ASTM E401
Title:
Standard Practice for Bonding Thin Spectrochemical Samples and Standards to a Greater Mass of Material
Organization: ASTM
Year: 1970
Status: Inactive
ASTM ES9
Title:
EMERGENCY SPECIFICATION FOR CAUTIONARY LABELING OF PORTABLE KEROSINE CONTAINERS FOR CONSUMER USE
Organization: ASTM
Year: 1984
Status: Inactive
ASTM D1342
Title:
Standard Test Method for Paraffin-Type Hydrocarbons in Carnauba Wax
Organization: ASTM
Year: 1992
Status: Inactive
ASTM F563
Title:
Standard Specification for Wrought Cobalt-20Nickel-20Chromium-3.5Molybdenum-3.5Tungsten-5Iron Alloy for Surgical Implant Applications(UNS R30563)
Organization: ASTM
Year: 2000
Status: Inactive
ASTM E525
Title:
Standard Practice for Reporting Dosimetry Results on Nuclear Graphite
Organization: ASTM
Year: 1990
Status: Inactive
UOP822
Title:
SPECIFIC GRAVITY OF COKE AND POWDERED ASPHALTS
Organization: ASTM
Year: 1981
Status: Inactive
ASTM D6314
Title:
Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials
Organization: ASTM
Year: 1998
Status: Inactive
ASTM F120
Title:
STANDARD PRACTICES FOR DETERMINATION OF THE CONCENTRATION OF IMPURITIES IN SINGLE CRYSTAL SEMICONDUCTOR MATERIALS BY INFRARED ABSORPTION SPECTROSCOPY
Organization: ASTM
Year: 1988
Status: Inactive
ASTM D3745
Title:
Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
Organization: ASTM
Year: 1995
Status: Inactive
UOP358
Title:
BROMINE INDEX OF LIQUID BUTANE AND PETROLEUM DISTILLATES BY COULOMETRIC TITRATION
Organization: ASTM
Status: Inactive
ASTM E988
Title:
Standard Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples
Organization: ASTM
Year: 1996
Status: Inactive
UOP592
Title:
PALLADIUM IN CATALYSTS BY VISIBLE SPECTROPHOTOMETRY
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D2935
Title:
Standard Test Method for Apparent Density of Industrial Aromatic Hydrocarbons
Organization: ASTM
Year: 1996
Status: Inactive
ASTM E1939
Title:
Standard Practice for Blood Irradiation Dosimetry
Organization: ASTM
Year: 1998
Status: Inactive
ASTM E657
Title:
Standard Test Method for Comparative Acute and Long-Term Oral or Gustatory Avian Repellency
Organization: ASTM
Year: 1995
Status: Inactive
ASTM F61
Title:
STANDARD TEST METHOD FOR PHOSPHATE IN ELECTRONIC GRADE HYDROGEN PEROXIDE SOLUTIONS
Organization: ASTM
Status: Inactive
ASTM F936
Title:
Standard Specification for Chocks, Panama, Mooring Cast Steel
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D3714
Title:
STANDARD TEST METHOD FOR BLACK MARKING RESISTANCE OF FLOOR POLISHES AS MEASURED BY THE LADDER AND PENDULUM APPARATUS
Organization: ASTM
Year: 1987
Status: Inactive
ASTM F328
Title:
Standard Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D3819
Title:
Standard Performance Specification for Men's and Boys' Woven Pajama Fabrics
Organization: ASTM
Year: 2002
Status: Inactive
ASTM A919
Title:
Standard Terminology Relating to Heat Treatment of Metals
Organization: ASTM
Year: 1984
Status: Inactive
ASTM D1964
Title:
Standard Test Method for Tung Oil Quality
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D4076
Title:
STANDARD SPECIFICATION FOR o-XYLENE 950 (R 1990)
Organization: ASTM
Year: 1986
Status: Inactive
ASTM E1626
Title:
Standard Guide for Including Government Procurement Requirements in ASTM Documents
Organization: ASTM
Year: 2002
Status: Inactive
ASTM F419
Title:
Standard Test Method for Determining Carrier Density in Silicon Epitaxial Layers by Capacitance-Voltage Measurements on Fabricated Junction or Schottky Diodes
Organization: ASTM
Year: 1994
Status: Inactive
ASTM D1625
Title:
Standard Specification for Chromated Copper Arsenate
Organization: ASTM
Year: 1971
Status: Inactive
ASTM D4697
Title:
Standard Guide for Maintaining Test Methods in the User's Laboratory
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D2183
Title:
STANDARD TEST METHOD FOR FLOW PROPERTIES OF ADHESIVES
Organization: ASTM
Status: Inactive
ASTM D7206
Title:
Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
Organization: ASTM
Year: 2006
Status: Inactive
ASTM B431
Title:
STANDARD PRACTICE FOR PROCESSING OF MANDRELS FOR ELECTROFORMING
Organization: ASTM
Year: 1985
Status: Inactive
ASTM D4588
Title:
STANDARD GUIDE FOR ANALYSIS OF P-XYLENE
Organization: ASTM
Year: 1987
Status: Inactive
ASTM F1135
Title:
Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners
Organization: ASTM
Year: 1999
Status: Inactive
ASTM D259
Title:
STANDARD SPECIFICATION FOR WOVEN TAPES
Organization: ASTM
Year: 1977
Status: Inactive
ASTM F1573
Title:
Standard Specification for Anesthetic Equipment - Oropharyngeal and Nasopharyngeal Airways
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D5115
Title:
Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
Organization: ASTM
Year: 1990
Status: Inactive
ASTM F1156
Title:
Standard Terminology Relating to Product Counterfeit Protection Systems
Organization: ASTM
Year: 1994
Status: Inactive
ASTM C1138
Title:
Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
Organization: ASTM
Year: 1997
Status: Inactive
ASTM F576
Title:
Standard Test Method for Measurement of Insulator Thickness and Refractive Index on Silicon Substrates by Ellipsometry
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D3371
Title:
Standard Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography
Organization: ASTM
Year: 1995
Status: Inactive
ASTM E306
Title:
STANDARD METHOD FOR ABSOLUTE CALIBRATION OF REFLECTANCE STANDARDS
Organization: ASTM
Year: 1971
Status: Inactive
ASTM D6313
Title:
Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry
Organization: ASTM
Year: 1999
Status: Inactive
ASTM A395
Title:
Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
Organization: ASTM
Year: 1988
Status: Inactive
ASTM C789M
Title:
Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric)
Organization: ASTM
Year: 2000
Status: Inactive
UOP464
Title:
PHENOL IN LIGHT AROMATIC HYDROCARBONS AND CYCLOHEXANE BY SPECTROPHOTOMETRY
Organization: ASTM
Year: 2000
Status: Inactive
ASTM C1356M
Title:
Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure (Metric)
Organization: ASTM
Year: 1996
Status: Inactive
ASTM A657
Title:
STANDARD SPECIFICATION FOR TIN MILL PRODUCTS, BLACK PLATE ELECTROLYTIC CHROMIUM-COATED, SINGLE AND DOUBLE REDUCED (R 1992) (E1-1993)
Organization: ASTM
Year: 1987
Status: Inactive
ASTM D4368
Title:
Standard Guide for Testing Poly(Vinyl Chloride) Resins
Organization: ASTM
Year: 1989
Status: Inactive
ASTM D3615
Title:
STANDARD TEST METHOD FOR CHEMICAL RESISTANCE OF THERMOSET MOLDING COMPOUNDS USED IN THE MANUFACTURE OF MOLDED FITTINGS
Organization: ASTM
Year: 1987
Status: Inactive
ASTM C1532
Title:
Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
Organization: ASTM
Year: 2006
Status: Inactive
ASTM E2410
Title:
Standard Practice for Designing and Validating Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials
Organization: ASTM
Year: 2004
Status: Inactive
ASTM E1261
Title:
Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing
Organization: ASTM
Year: 2000
Status: Inactive
ASTM D5097
Title:
Standard Test Method for Filter-Retained Solids Content of Polymer Latexes
Organization: ASTM
Year: 1990
Status: Inactive
ASTM A373
Title:
Specification for Structural Steel for Welding
Organization: ASTM
Status: Inactive
ASTM E2241
Title:
Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
Organization: ASTM
Year: 2006
Status: Active
ASTM D3510
Title:
STANDARD TEST METHOD FOR DIAMETER OF WOOL AND OTHER ANIMAL FIBERS BY IMAGE ANALYSER
Organization: ASTM
Year: 1981
Status: Inactive
ASTM D1984
Title:
Standard Specification for Tall Oil Fatty Acids
Organization: ASTM
Status: Inactive
ASTM D3949
Title:
Standard Specification for Coated Glass Fabrics Used for Electrical Insulation
Organization: ASTM
Year: 1999
Status: Inactive
ASTM F474
Title:
Standard Specification for Static Screw-Retention Strength of Binding Mounting Area on Alpine Skis
Organization: ASTM
Year: 1998
Status: Inactive
ASTM D4202
Title:
Standard Test Method for Thermal Stability of Poly(Vinyl Chloride) (PVC) Resin
Organization: ASTM
Year: 1992
Status: Inactive
ASTM E1062
Title:
Standard Practice for Conducting Reproductive Studies with Avian Species
Organization: ASTM
Year: 1986
Status: Inactive
ASTM B138
Title:
Standard Specification for Manganese Bronze Rod, Bar and Shapes
Organization: ASTM
Year: 1996
Status: Inactive
ASTM E1983
Title:
Standard Guide for Assessment of Wetland Functions
Organization: ASTM
Year: 1998
Status: Inactive
ASTM F1747
Title:
Standard Test Method for External Fixator Joints
Organization: ASTM
Year: 1996
Status: Inactive
ASTM A143
Title:
Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
Organization: ASTM
Year: 2001
Status: Inactive
ASTM D2159
Title:
Standard Test Method for Naphthenes in Saturates Fractions by Refractivity Intercept
Organization: ASTM
Year: 1993
Status: Inactive
ASTM F599
Title:
Standard Specification for Poly(Vinylidene Chloride) (PVDC) Plastic-Lined Ferrous Metal Pipe and Fittings
Organization: ASTM
Year: 1995
Status: Inactive
ASTM D1175
Title:
Standard Test Methods for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder and Uniform Abrasion Methods)
Organization: ASTM
Year: 1980
Status: Inactive
ASTM D3436
Title:
Standard Practice for Sampling and Handling Aniline
Organization: ASTM
Year: 1999
Status: Inactive
ASTM D2769
Title:
STANDARD METHOD FOR TESTING RUBBER HOSE USED FOR LIQUIFIED PETROLEUM GAS-EXTRACTABLE MATERIAL
Organization: ASTM
Year: 1981
Status: Inactive
ASTM C342
Title:
Standard Test Method for Potential Volume Change of Cement-Aggregate Combinations
Organization: ASTM
Year: 1997
Status: Inactive
ASTM D3940
Title:
Standard Test Method for Bursting Strength (Load) and Elongation of Sewn Seams of Knit or Woven Stretch Textile Fabrics
Organization: ASTM
Year: 1983
Status: Inactive
ASTM F1388
Title:
Standard Test Method for Generation Lifetime and Generation Velocity of Silicon Material by Capacitance-Time Measurements of Metal-Oxide-Silicon (MOS) Capacitors
Organization: ASTM
Year: 1992
Status: Inactive