NF ISO 255
Title:
Belt drives. Pulleys for V-belts (system based on datum width). Geometrical inspection of grooves.
Organization: AFNOR
Year: 1991
Status: Active
BS A 353
Title:
Inserts, with Self-Locking Floating Nut, with MJ Threads, in Metallic Material, Coated or Uncoated - Dimensions
Organization: BSI
Year: 2000
Status: Active
DIN 69001-41
Title:
Machine tools; Multi-spindle heads; Guide sleeves Type A
Organization: DIN
Year: 1981
Status: Active
DIN 8181
Title:
Roller chains, double pitch
Organization: DIN
Year: 2000
Status: Inactive
DS/ISO 8750
Title:
Spring-type straight pins - Coiled, standard duty
Organization: DS
Year: 1992
Status: Inactive
DS/ISO 7046
Title:
Cross recessed countersunk flat head screws (common head style) - Product grade A and property class 4.8 only
Organization: DS
Year: 1985
Status: Inactive
NS-EN ISO 10669:1999
Title:
Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999)
Organization: SN
Year: 1999
Status: Active
DS/ISO 8678
Title:
Cup head square neck bolts with small head and short neck - Product grade B
Organization: DS
Year: 1992
Status: Active
SN EN ISO 9222-1
Title:
Technical drawings - Seals for dynamic application - Part 1: General simplified representation (ISO 9222-1:1989)
Organization: SNV
Year: 1996
Status: Active
NF EN ISO 16583
Title:
Open end blind rivets with break pull mandrel and countersunk head - Cu/St or Cu/Br or Cu/SSt
Organization: AFNOR
Year: 2003
Status: Active
JIS B 1091
Title:
Fasteners - Acceptance inspection
Organization: JSA
Year: 2003
Status: Active
BS 7568-12
Title:
Press tools - Part 12: Elastomer pressure springs - General specification
Organization: BSI
Year: 1992
Status: Inactive
BS 7056
Title:
Specification for Hardened Parallel Pins with Internal Thread
Organization: BSI
Year: 1989
Status: Inactive
FD ISO/TR 10064-3
Title:
Cylindrical gears - Code of inspection practice - Part 3 : recommendations relative to gear blanks, shaft centre distance and parallelism of axes
Organization: AFNOR
Year: 2001
Status: Active
BS 2 A 302
Title:
Nuts, Self-Locking, with Maximum Operating Temperatures Less Than or Equal to 425 Degrees Celcius - Procurement Specification
Organization: BSI
Year: 2000
Status: Active
DIN EN ISO 8740
Title:
Zylinderkerbstifte mit Fase (ISO 8740:1997); Deutsche Fassung EN ISO 8740:1997
Organization: DIN
Year: 1998
Status: Active
IEC 61734
Title:
Application of IEC 60617-12 and IEC 60617-13 Standards
Organization: IEC
Year: 1997
Status: Inactive
EN 24035
Title:
Hexagon Thin Nuts (Chamfered) - Product Grades A and B
Organization: CEN
Year: 1991
Status: Inactive
DS/INF 57
Title:
Geometrical Product Specifications (GPS) - Guidance in use
Organization: DS
Year: 2002
Status: Inactive
DIN LN 29990
Title:
Annietmuttern mit zylindrischer Aussenkung, selbstsichernd, beiderseitiger Flansch, fuer Temperaturen bis 315 °C und bis 425 °C; Nicht fuer Neukonstruktionen
Organization: DIN
Year: 1996
Status: Active
DS/EN 2591-220
Title:
Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling
Organization: DS
Year: 2005
Status: Active
BS 6100-1.3.6
Title:
Glossary of Building and civil engineering terms - Part 1: General and miscellaneous - Section 1.3 Parts of construction works - Subsection 1.3.6 Jointing products, builders' hardware and accessories
Organization: BSI
Year: 1991
Status: Inactive
DIN 15432
Title:
Power transmission engineering; brake discs; main dimensions
Organization: DIN
Year: 1989
Status: Inactive
NF EN 10089
Title:
Hot-rolled steels for quenched and tempered springs - Technical delivery conditions
Organization: AFNOR
Year: 2003
Status: Active
DIN 25200
Title:
Bolts, screws, studs and nuts used in rail vehicle construction - Summary
Organization: DIN
Year: 1997
Status: Active
NS 5749:1984
Title:
Corrosion-resistant stainless steel fasteners - Specifications (ISO 3506:1979)
Organization: SN
Year: 1984
Status: Active
SN ISO 6194-3
Title:
Rotary shaft lip type seals - Part 3: storage, handling and installation (ISO 6194-3:1998)
Organization: SNV
Year: 2005
Status: Active
ISO TR 9274
Title:
Rolling Bearings - Measuring and Gauging Principles and Methods
Organization: ISO
Year: 1991
Status: Inactive
BS EN 26891
Title:
Timber Structures - Joints Made with Mechanical Fasteners - General Principles for the Determination of Strength and Deformation Characteristics
Organization: BSI
Year: 1991
Status: Active
NS-EN ISO 10510:1999
Title:
Tapping screw and washer assemblies with plain washers (ISO 10510:1999)
Organization: SN
Year: 1999
Status: Inactive
BS 856
Title:
Specification for Wing Nuts
Organization: BSI
Status: Active
NF EN ISO 15984
Title:
Open end blind rivets with break pull mandrel and countersunk head - A2/A2
Organization: AFNOR
Year: 2003
Status: Active
DIN EN ISO 10485
Title:
Cone proof load test on nuts (ISO 10485:1991); German version EN ISO 10485:2004
Organization: DIN
Year: 2004
Status: Inactive
DIN 58450
Title:
Linsenschrauben mit Schlitz; Skalenschrauben
Organization: DIN
Year: 1972
Status: Active
DIN 14-1
Title:
Metrisches ISO-Gewinde; Gewinde unter 1 mm Nenndurchmesser; Grundprofil
Organization: DIN
Year: 1987
Status: Active
BS PD 6507
Title:
Guidance on Metric Screw Threads and Fasteners for Use by Model Engineers
Organization: BSI
Year: 1982
Status: Active
NS 5118:1970
Title:
Button head grooved pins
Organization: SN
Year: 1970
Status: Inactive
VDI 2541
Title:
Gleitlager aus thermoplastischen Kunststoffen
Organization: VDI
Year: 1975
Status: Inactive
BS 3130-6
Title:
Glossary of Packaging Terms - Part 6: Wooden Packaging
Organization: BSI
Year: 1981
Status: Active
DS/EN 4497
Title:
Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (...
Organization: DS
Year: 2005
Status: Active
SN EN ISO 15330
Title:
Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999)
Organization: SNV
Year: 2000
Status: Active
DIN 15061-1
Title:
Hebezeuge; Rillenprofile fuer Seilrollen
Organization: DIN
Year: 1977
Status: Active
BS 6442
Title:
Limits of Surface Imperfections on Elastomeric Toroidal Sealing Rings (`O'-Rings)
Organization: BSI
Year: 1984
Status: Inactive
NS-EN 13481-5:2002/A1:2006
Title:
Amendment A1 - Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track
Organization: SN
Year: 2006
Status: Inactive
NF F05-008
Title:
Railway fixed equipment. Tee-head bolts.
Organization: AFNOR
Year: 1993
Status: Active
NF EN ISO 21049
Title:
Pumps - Shaft sealing systems for centrifugal and rotary pumps
Organization: AFNOR
Year: 2005
Status: Active
BS EN 3010
Title:
Bolts, Hexagon Head, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy NI-P101HT (Waspaloy) - Classification: 1 210 MPa (At Ambient Temperature)/730 Degrees Clesius
Organization: BSI
Year: 1998
Status: Active
DIN 8141-2
Title:
ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Gauges for internal and external threads
Organization: DIN
Year: 1993
Status: Active
DIN 21921
Title:
Mine plans - Tectonic elements and figure of strata
Organization: DIN
Year: 1996
Status: Active
DIN 3570
Title:
Steel Strap for Tubes of NW 20 to 500
Organization: DIN
Status: Active
SN EN ISO 10628
Title:
Flow diagrams for process plants - General rules (ISO 10628:1997)
Organization: SNV
Year: 2001
Status: Active
DIN EN ISO 10484
Title:
Widening test on nuts (ISO 10484:1997); German version EN ISO 10484:2004
Organization: DIN
Year: 2004
Status: Active
DIN 2283-3
Title:
Geometrical product specifications (GPS) - NOT GO workshop screw plug gauges and check plug for ISO metric screw threads with nominal diameters over 40 mm up to 250 mm, for use in precision enginee...
Organization: DIN
Year: 2001
Status: Active
BS 64
Title:
Specification for Normal and High Strength Steel Bolts and Nuts for Railway Rail Fishplates
Organization: BSI
Year: 1992
Status: Active
DIN 435
Title:
Scheiben, vierkant, keilfoermig fuer I-Traeger
Organization: DIN
Year: 2000
Status: Active
ISO 15065
Title:
Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
Organization: ISO
Year: 2005
Status: Active
EN 12242
Title:
Touch and Close Fasteners - Determination of Peel Strength
Organization: CEN
Year: 1999
Status: Active
JIS B 1358
Title:
Taper Pins with Thread
Organization: JSA
Year: 1990
Status: Active
BS EN 50262
Title:
Cable glands for electrical installations
Organization: BSI
Year: 1999
Status: Inactive
BS 1195-1
Title:
Specification for Kitchen Fitments and Equipment Part 1. Imperial Units with Metric Equivalents
Organization: BSI
Year: 1973
Status: Inactive
DS/EN 3716-002
Title:
Aerospace series - Connectors, single-way with triaxial interface, for transmission of digital data - Part 002: Conditions of use and list of product standards
Organization: DS
Year: 2006
Status: Active
NS 970:1970
Title:
Hexagon nuts, Unified - Semifinished - Double chamfered UNC threads 1/4" to 1 1/2"
Organization: SN
Year: 1970
Status: Inactive
BS EN 24033
Title:
Hexagon Nuts, Style 2 - Product Grades A and B
Organization: BSI
Year: 1992
Status: Active
EN 13271
Title:
Timber fasteners Characteristic load-carrying capacities and slip-moduli for connector joints
Organization: CEN
Year: 2001
Status: Active
BS EN 22338
Title:
Parallel Pins, Unhardened
Organization: BSI
Year: 1992
Status: Active
FD ISO/TR 10064-4
Title:
Cylindrical gears. Code of inspection practice. Part 4: recommendations relative to surface texture and tooth contact pattern checking.
Organization: AFNOR
Year: 1999
Status: Active
BS 7496-1
Title:
Cross-recessed tapping screws - Part 1. Specification for pan head screws
Organization: BSI
Year: 1992
Status: Inactive
EN 28750
Title:
Spring-Type Straight Pins - Coiled, Standard Duty
Organization: CEN
Year: 1992
Status: Inactive
BS 2HR 501
Title:
Specification for Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn wire for springs and springs - (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Organization: BSI
Year: 1973
Status: Inactive
SN EN ISO 15979
Title:
Open end blind rivets with break pull mandrel and protruding head - St/St (ISO 15979:2002)
Organization: SNV
Year: 2003
Status: Active
DS/ISO 8735
Title:
Parallel pins with internal thread - Hardened
Organization: DS
Year: 1992
Status: Inactive
BS EN 28751
Title:
Spring-Type Straight Pins - Coiled, Light Duty
Organization: BSI
Year: 1989
Status: Inactive
NF EN 28736
Title:
Taper pins with internal thread, unhardened.
Organization: AFNOR
Year: 1992
Status: Active
BS EN ISO 23429
Title:
Gauging of hexagon sockets
Organization: BSI
Year: 2004
Status: Active
DS/EN 1834-2
Title:
Reciprocating internal combustion engines - Safety requirements for design and construction of engines for use in potentially explosive atmospheres - Part 2: Group I engines for use in underground ...
Organization: DS
Year: 2001
Status: Active
NF EN ISO 8746
Title:
Grooved pins with round head.
Organization: AFNOR
Year: 1997
Status: Active
NF F18-831
Title:
Railway rolling stock. Rolling bearings for drives and traction motors. Quality requirements.
Organization: AFNOR
Year: 1992
Status: Active
DS/ISO 1482
Title:
Slotted countersunk (flat) head tapping screws common head style
Organization: DS
Year: 1992
Status: Inactive
DIN 645-2
Title:
Rolling bearings - Profile rail rolling guides - Part 2: Dimensions for serie 4
Organization: DIN
Year: 1999
Status: Inactive
BS 2TA 28
Title:
Specification for forging stock and wire of titanium-aluminium-vanadium alloy (tensile strength 1100-1300 MPa) (limiting ruling section 20 mm) (primarily intended for the manufacture of fasteners c...
Organization: BSI
Year: 1974
Status: Inactive
NF EN 12531
Title:
Castors and wheels. Hospital bed castors.
Organization: AFNOR
Year: 1998
Status: Active
NS 1871:1983
Title:
ISO general purpose screw threads - Basic profile (ISO 68:1973)
Organization: SN
Year: 1983
Status: Active
NS 5738:1985
Title:
Hexagon socket set screws with dog point (ISO 4028:1977)
Organization: SN
Year: 1985
Status: Active
DIN 7989-2
Title:
Washers for use structural steelwork - Part 2: Product grade A
Organization: DIN
Year: 2001
Status: Active
EN 13298
Title:
Railway applications Suspension components Helical suspension springs, steel
Organization: CEN
Year: 2003
Status: Active
DS/EN 2591-422
Title:
Aerospace series - Elements of electrical and optical connection - Test methods - Part 422: Locking wire hole strength
Organization: DS
Year: 2002
Status: Active
DIN 71412
Title:
Kegelschmiernippel
Organization: DIN
Year: 1987
Status: Inactive
NS-EN ISO 10485:2004
Title:
Cone proof load test on nuts (ISO 10485:1991)
Organization: SN
Year: 2004
Status: Active
DS/EN 24014
Title:
Hexagon head bolts - Product grades A and B
Organization: DS
Year: 1992
Status: Inactive
DIN EN 14218
Title:
Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified); German version EN 14218:2003
Organization: DIN
Year: 2003
Status: Active
ISO 15973
Title:
Closed End Blind Rivets with Break Pull Mandrel and Protruding Head - AIA/St
Organization: ISO
Year: 2000
Status: Active
JIS B 1042
Title:
Fasteners - Surface Discontinuities - Part 2: Nuts
Organization: JSA
Year: 1998
Status: Active
NF EN 3050
Title:
Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification
Organization: AFNOR
Year: 1998
Status: Active
DIN 24259-1
Title:
Pumps; baseplates for machines, dimensions
Organization: DIN
Year: 1979
Status: Active
EN 60617-3
Title:
Graphical Symbols for Diagrams Part 3: Conductors and Connecting Devices
Organization: CENELEC
Year: 1996
Status: Inactive
BS 4A 228
Title:
Specification for Steel double hexagon bolts - 1250 MPa (180,000 lbf/in2) for aircraft
Organization: BSI
Year: 1997
Status: Inactive
BS ISO 965-2
Title:
ISO General Purpose Metric Screw Threads - Tolerances - Part 2: Limits of Sizes for General Purpose External and Internal Screw Threads - Medium Quality
Organization: BSI
Year: 1999
Status: Active
NF F01-224
Title:
Railway transport equipment. Clevis and tenon joints. Headless fixed pins type FFS.
Organization: AFNOR
Year: 1981
Status: Active
DIN 25193
Title:
Railway vehicles - Mushroom head anchor screws with metric ISO thread - Class C
Organization: DIN
Year: 2003
Status: Active
BS 3673-2
Title:
Specification for Spring retaining rings Part 2: Carbon Steel E Clips
Organization: BSI
Status: Inactive
NF ISO 53
Title:
Cylindrical gears for general and heavy engineering. Standard basic rack tooth profile.
Organization: AFNOR
Year: 1998
Status: Active
JIS B 1706-1
Title:
Straight Bevel Gear for General Engineering - Part 1: Basic Rack
Organization: JSA
Year: 1999
Status: Active
DIN 103-4
Title:
ISO Metric Trapezoidal Screw Thread; Nominal Dimensions
Organization: DIN
Year: 1977
Status: Active
DIN 4000-33
Title:
Sachmerkmal-Leisten fuer Kupplungen, Freilaeufe, Gelenke und Gelenkwellen
Organization: DIN
Year: 1983
Status: Inactive
NS 1816:1966
Title:
Washers for UNC-bolts
Organization: SN
Status: Inactive
BS 4320
Title:
Specification for Metal washers for general engineering purposes metric series
Organization: BSI
Status: Active
DIN EN ISO 228-2
Title:
Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987); German version EN ISO 228-2:2003
Organization: DIN
Year: 2003
Status: Active
ISO 14
Title:
Straight-Sided Splines for Cylindrical Shafts with Internal Centering - Dimensions, Tolerances and Verification
Organization: ISO
Year: 1982
Status: Active
SN EN ISO 8740
Title:
Grooved pins - Full-length parallel grooved, with chamfer (ISO 8740:1997)
Organization: SNV
Year: 1998
Status: Active
JIS E 3701
Title:
Railway Crossing Equipment - Safety Colour Code
Organization: JSA
Year: 1995
Status: Active
NF ISO 54
Title:
Cylindrical gears for general engineering and for heavy engineering. Modules.
Organization: AFNOR
Year: 1997
Status: Active
DS/EN 3831
Title:
Aerospace series - Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS2 coated
Organization: DS
Year: 2005
Status: Active
NF F50-010
Title:
Railway fixed equipment. Cam bolts. Oval head bolts.
Organization: AFNOR
Year: 1993
Status: Active
DIN 45635-23
Title:
Measurement of noise emitted by machines - Airborne noise emission enveloping surface method - Part 23: Gear transmisson
Organization: DIN
Year: 2003
Status: Active
DS/EN 28750
Title:
Spring-type straight pins - Coiled, standard duty
Organization: DS
Year: 1992
Status: Inactive
DIN 15560-6
Title:
Projectors for film and television, stage and photographic use; graphical symbols for studio and stage luminaries on lighting plans and stencil
Organization: DIN
Year: 1984
Status: Active
NF R94-302
Title:
Road vehicles. Fillets, chamfers and backing off.
Organization: AFNOR
Year: 1989
Status: Active
DIN EN ISO 15483
Title:
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999); English version DIN EN ISO 15483
Organization: DIN
Year: 2000
Status: Active
DIN 8196-1
Title:
Verzahnung der Kettenraeder fuer Rollenketten nach DIN 8187 und DIN 8188; Profilabmessungen
Organization: DIN
Year: 1987
Status: Inactive
DIN 3401
Title:
Drip-feed lubricators and cups; main dimensions
Organization: DIN
Status: Active
DIN 158-1
Title:
Metric taper external and mating parallel internal screw threads - Dimensions, tolerances and inspection
Organization: DIN
Year: 1997
Status: Active
BS EN 493
Title:
Fasteners - Surface Discontinuities - Nuts
Organization: BSI
Year: 1992
Status: Inactive
BS 2 A 26
Title:
Specification for Corrosion-Resisting Steel Hexagonal-Headed Bolts (B.A. and B.S.F. Threads) for Aircraft
Organization: BSI
Status: Active
NS-EN ISO 7045:1994
Title:
Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:1994)
Organization: SN
Year: 1994
Status: Inactive
DS/EN ISO 7721-2
Title:
Countersunk flat head screws - Part 2: Penetration depth of cross recesses
Organization: DS
Year: 1994
Status: Active
NF L34-150
Title:
Accessory drives and mounting pads (engine and gearbox).
Organization: AFNOR
Year: 1977
Status: Active
NF EN 14218
Title:
Hexagon nuts with flange - Fine pitch thread
Organization: AFNOR
Year: 2003
Status: Active
ISO TR 13593
Title:
Enclosed gear drives for industrial applications
Organization: ISO
Year: 1999
Status: Inactive
NF EN 13232-1
Title:
Railway applications - Track - Switches and crossings - Part 1 : definitions
Organization: AFNOR
Year: 2004
Status: Active
BS EN ISO 6410-2
Title:
Technical Drawings - Screw Threads and Threaded Parts Part 2: Screw Thread Inserts
Organization: BSI
Year: 1996
Status: Active
DS/EN ISO 15979
Title:
Open end blind rivets with break pull mandrel and protruding head - St/St
Organization: DS
Year: 2003
Status: Active
ISO 8579-1
Title:
Acceptance Code for Gears - Part 1: Test Code for Airborne Sound
Organization: ISO
Year: 2002
Status: Active
BS EN 10089
Title:
Hot rolled steels for quenched and tempered springs Technical delivery conditions
Organization: BSI
Year: 2002
Status: Active
DIN 3761-4
Title:
Radial-Wellendichtringe fuer Kraftfahrzeuge; Sichtbare Unregelmaessigkeiten
Organization: DIN
Year: 1984
Status: Inactive
BS EN ISO 8740
Title:
Grooved pins - Full-length parallel grooved, with chamfer
Organization: BSI
Year: 1998
Status: Active
DIN 34820
Title:
Plain washers, chamfered, for steel structures
Organization: DIN
Year: 2004
Status: Inactive
T60-183
Title:
Lubricants, industrial oils and related products for slideways of machine-tools. Anti-stick slip lubricating ability.
Organization: AFNOR
Year: 1994
Status: Active
NF E27-381
Title:
Clevis pins and screwed spindles.
Organization: AFNOR
Status: Active
JIS B 0162-4
Title:
Plain bearings - Terms, definitions and classification - Part 4: Calculation parameters and their symbol
Organization: JSA
Year: 2006
Status: Active
BS EN ISO 15483
Title:
Cross Recessed Raised Countersunk Head Drilling Screws with Tapping Screw Thread
Organization: BSI
Year: 1999
Status: Active
DIN 561
Title:
Sechskantschrauben mit Zapfen und kleinem Sechskant
Organization: DIN
Year: 1995
Status: Active
NS 339:1968
Title:
Solid pedestal bearings
Organization: SN
Status: Inactive
JIS B 0218
Title:
Limit of Sizes and Tolerance for Metric Trapezoidal Screw Threads
Organization: JSA
Year: 1980
Status: Inactive
BS 7823-2
Title:
Pedestal Plain Bearings - Part 2: Specification for Side Flange Bearings
Organization: BSI
Year: 1995
Status: Inactive
BS 7050
Title:
Specification for Full-Length Taper Grooved Pins
Organization: BSI
Year: 1989
Status: Inactive
DIN 7867
Title:
Keilrippenriemen und -scheiben
Organization: DIN
Year: 1986
Status: Active
DS/EN 4591
Title:
Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS2 lubricated - Classification: 1 550 MPa (at ambient temperature) / 315 °C
Organization: DS
Year: 2005
Status: Active
DIN 561
Title:
Hexagon head set screws with small hexagon and full dog point
Organization: DIN
Year: 1995
Status: Active
DS/EN ISO 1234
Title:
Split pins
Organization: DS
Year: 1998
Status: Active
DS/EN 2591-6415
Title:
Aerospace series - Elements of electrical and optical connection - Test methods - Part 6415: Optical elements - Test probe damage
Organization: DS
Year: 2002
Status: Active
BS 5512
Title:
Dynamic Load Ratings and Rating Life of Rolling Bearings
Organization: BSI
Year: 1991
Status: Inactive
JIS B 0162-2
Title:
Plain bearings - Terms, definitions and classification - Part 2: Friction and wear
Organization: JSA
Year: 2006
Status: Active
DIN 884-1
Title:
Solid cylindrical cutters; dimensions
Organization: DIN
Year: 1981
Status: Inactive
BS 1564
Title:
Specification for Pressed Steel Sectional Rectangular Tanks
Organization: BSI
Year: 1975
Status: Inactive
NS 1885:1981
Title:
Tolerances for fasteners - Part 1: Bolts, screws and nuts with thread diameters between 1,6 (inclusive) and 150 mm (inclusive) and product grades A,B and C (ISO 4759-1:1978)
Organization: SN
Year: 1981
Status: Active
ISO 23711
Title:
Elastomeric seals Requirements for materials for pipe joint seals used in water and drainage applications Thermoplastic elastomers
Organization: ISO
Year: 2003
Status: Active
NF EN ISO 15973
Title:
Closed end blind rivets with break pull mandrel and protruding head - AIA/St
Organization: AFNOR
Year: 2001
Status: Active
NF F56-158
Title:
Fixed railway installations. Equipment for overhead telecommunication and signalling lines. Plates for stay-wire.
Organization: AFNOR
Year: 1978
Status: Active
BS A 344
Title:
Nuts, Anchor, Self-Locking, Fixed, Single Lug, Reduced Series, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius, 1 100 MPa (at Ambient Te...
Organization: BSI
Year: 1999
Status: Active
NS 964:1972
Title:
Hexagon bolts - Unified - Semifinished - Wholly threaded - UNC threads 1/4" to 1 1/2"
Organization: SN
Year: 1972
Status: Active
AFNOR NF L05-026
Title:
Aerospace industry. ISO M and mj threads. Undercut relief and lead-in chamfers.
Organization: AFNOR
Year: 1988
Status: Active
DS 5009.02
Title:
Graphical symbols for diagrams - Part 2: General rules and general symbol elements, qualifying symbols and other symbols having general applications
Organization: DS
Year: 1985
Status: Inactive
DIN 262-1
Title:
Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Nominal Dimensions
Organization: DIN
Year: 1973
Status: Active
NS-EN ISO 13337:1997
Title:
Spring-type straight pins - Slotted, light duty (ISO 13337:1997)
Organization: SN
Year: 1998
Status: Inactive
BS 7371-11
Title:
Coatings on Metal Fasteners - Part 11: Specification for Zinc Flake Non-Electrolytically Applied Cured Coatings
Organization: BSI
Year: 1993
Status: Inactive
DS/EN 12237
Title:
Ventilation for buildings - Ductwork - Strenght and leakage of circular sheet metal ducts
Organization: DS
Year: 2003
Status: Active
NF E27-154
Title:
Rivets with countersunk head.
Organization: AFNOR
Status: Active
DIN 69001-45
Title:
Machine tools; Multi-spindle heads; Clamping pieces Type A
Organization: DIN
Year: 1981
Status: Active
BS EN 4495
Title:
Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient temper...
Organization: BSI
Year: 2006
Status: Active
BS PD ISO/TR 10064-5
Title:
Code of inspection practice - Part 5: Recommendations relative to evaluation of gear measuring instruments
Organization: BSI
Year: 2005
Status: Active
NF L31-211
Title:
Airframe bearings. Rigid ball bearings for light loads.
Organization: AFNOR
Status: Active
EN 28749
Title:
Pins and Grooved Pins - Shear Test
Organization: CEN
Year: 1992
Status: Active
JIS E 1505
Title:
Single Ended Wrenches for Track Service
Organization: JSA
Year: 1993
Status: Active
SN 219505-15
Title:
Gas cylinder valves; Threaded connections for filling pressures =200 bar; Part 15: Connection G 3/4? left outside with safety-gasket
Organization: SNV
Year: 1984
Status: Active
BS 2518-1
Title:
Specification for Rotary form-relieved gear cutters - Part 1: Diametral pitch
Organization: BSI
Status: Active
DS/INF 82
Title:
Guide to EN 29000 - Quality management in mechanical engineering
Organization: DS
Year: 1992
Status: Inactive
SN EN 14831
Title:
Fasteners - Tightening performance - Torque/Angle simplified test method
Organization: SNV
Year: 2005
Status: Active
BS ISO 16287
Title:
Plain bearings - Thermoplastic bushes - Dimensions and tolerances
Organization: BSI
Year: 2005
Status: Active
DIN EN ISO 8746
Title:
Halbrundkerbnaegel (ISO 8746:1997); Deutsche Fassung EN ISO 8746:1997
Organization: DIN
Year: 1998
Status: Active
DIN EN 2017
Title:
Aerospace - Bearings-airframe rolling, double row self aligning ball bearings in corrosion resisting steel; diameter series 2 - Dimensions and loads; inactive for new design; German version EN 2017...
Organization: DIN
Year: 1995
Status: Active
DIN 208
Title:
Maschinen-Reibahlen mit Morsekegelschaft
Organization: DIN
Year: 1981
Status: Active
DS/EN 4008-005
Title:
Aerospace series - Elements of electrical and optical connection - Crimping tools and associated accessories - Part 005: Positioner for crimping tool M22520/2-01 - Product standard
Organization: DS
Year: 2006
Status: Active
BS 7644-1
Title:
Direct Tension Indicators - Part 1: Specification for Compressible Washers
Organization: BSI
Year: 1993
Status: Inactive
BS 5594
Title:
Specification for Leaf chains, clevises and sheaves
Organization: BSI
Year: 1993
Status: Inactive
DIN 3761-8
Title:
Radial-Wellendichtringe fuer Kraftfahrzeuge; Pruefung; Ausfuehrung der Achsenschnitte
Organization: DIN
Year: 1984
Status: Inactive
NF F00-079
Title:
Railway equipment in general. Compact-rubber "O" rings.
Organization: AFNOR
Year: 1992
Status: Active
NS-EN ISO 4029:2003
Title:
Hexagon socket set screws with cup point (ISO 4029:2003)
Organization: SN
Year: 2004
Status: Active
NS-EN ISO 4762:2004
Title:
Hexagon socket head cap screws (ISO 4762:2004)
Organization: SN
Year: 2004
Status: Active
DIN EN 13446
Title:
Wood-based panels - Determination of withdrawal capacity of fasteners; German version EN 13446:2002
Organization: DIN
Year: 2002
Status: Active
DIN 2217-2
Title:
Antriebselemente; Keilriemenscheiben, Pruefung der Rillen
Organization: DIN
Year: 1973
Status: Active
NS 5167:1971
Title:
Conical shaft ends, long series, with external threads
Organization: SN
Year: 1971
Status: Active
SN EN 14831
Title:
Fasteners - Tightening performance - Torque/Angle simplified test method
Organization: SNV
Year: 2005
Status: Active
DIN 24539-1
Title:
Huetten- und Walzwerkseinrichtungen; Ankerplatten fuer Hammerschrauben nach DIN 261; Einfach-Ankerplatten; Masse, Bezeichnung, Einbautiefen
Organization: DIN
Year: 1985
Status: Active
SN 219505-21
Title:
Gasflaschen und Gasflaschenventile - Gewindeanschluesse fuer Fuelldruck <kleiner => 200 bar; Teil 21: Anschluss W 24,32x1/14<Zoll> fuer Handanzug
Organization: SNV
Year: 2000
Status: Active
DIN 85005-23
Title:
Ships and marine technology - Graphical symbols for technical documentation - Part 23: Isolations
Organization: DIN
Year: 2004
Status: Active
E25-034
Title:
Fasteners with tightening washer. Combination guide for washer-screw and washer-nut.
Organization: AFNOR
Year: 1986
Status: Active
BS 5341-8.1
Title:
Piston Rings up to 200 mm Diameter for Reciprocating Internal Combustion Engines - Part 8: Designs, Dimensions and Designations for Multi-Piece Oil Control Rings - Section 8.1: Specification for Co...
Organization: BSI
Year: 1992
Status: Active
VDI/VDE 2255 Blatt 1
Title:
Feinwerkelemente; Energiespeicherelemente; Metallfedern
Organization: VDI
Year: 1982
Status: Inactive
NS-EN ISO 4753:1999
Title:
Fasteners - Ends of parts with external ISO metric screw thread (ISO 4753:1999)
Organization: SN
Year: 2000
Status: Inactive
NF ISO 262
Title:
ISO general purpose metric screw threads. Selected sizes for screws, bolts and nuts.
Organization: AFNOR
Year: 1999
Status: Active
DIN 28148
Title:
PTFE envelope gaskets for glass lined agitator vessels
Organization: DIN
Year: 1992
Status: Active
DIN 2083-1
Title:
Bearing Sleeves for Milling Machine Arbors, for Milling Cutters with Longitudinal Keyway
Organization: DIN
Year: 1980
Status: Active
ISO 7417
Title:
Hexagon Nuts for Structural Bolting - Style 2, Hot-Dip Galvanized (Oversize Tapped) - Product Grade A - Property Class 9 First Edition
Organization: ISO
Year: 1984
Status: Inactive
ISO 4382-2
Title:
Plain Bearings - Copper Alloys - Part 2: Wrought Copper Alloys for Solid Plain Bearings
Organization: ISO
Year: 1991
Status: Active
DIN 508
Title:
Nuts for T-slots
Organization: DIN
Year: 2002
Status: Active
DIN EN 24015
Title:
Hexagon head bolts with reduced shank (shank diameter ~ pitch diameter); product grade B (ISO 4015:1979)
Organization: DIN
Year: 1991
Status: Active
ASTM A467
Title:
STANDARD SPECIFICATION FOR MACHINE AND COIL CHAIN
Organization: ASTM
Year: 1986
Status: Inactive
DS/EN 4116
Title:
Aerospace series - Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread - Classification: 1100 MPa (at ambient temperature)/425 °C
Organization: DS
Year: 2005
Status: Active
DS/EN ISO 7093-2
Title:
Plain washers - Large series - Part 2: Product grade C
Organization: DS
Year: 2000
Status: Active
NS-EN ISO 23429:2004
Title:
Gauging of hexagon sockets (ISO 23429:2004)
Organization: SN
Year: 2004
Status: Active
NS 1882:1975
Title:
Studs, metric, metal end 2d
Organization: SN
Year: 1975
Status: Inactive
DIN 24901-4
Title:
Graphische Symbole fuer technische Zeichnungen fuer den Maschinenbau; Kompressoren, Ventilatoren; Darstellung in Fliessbildern
Organization: DIN
Year: 1983
Status: Active
NS-ISO 8742:1986
Title:
Grooved pins - Third-length centre grooved
Organization: SN
Year: 1988
Status: Inactive
SN EN ISO 2162-1
Title:
Technical product documentation - Springs - Part 1: Simplified representation (ISO 2162-1:1993)
Organization: SNV
Year: 1997
Status: Active
DS 85
Title:
Taper keys without gib head - Application and dimensions
Organization: DS
Year: 1975
Status: Inactive
NS-EN ISO 4036:2000
Title:
Hexagon thin nuts (unchamfered) - Product grade B (ISO 4036:1999)
Organization: SN
Year: 2001
Status: Inactive
DS/ISO 14617-4
Title:
Graphical symbols for diagrams - Part 4: Actuators and related devices
Organization: DS
Year: 2006
Status: Active
NF EN 682
Title:
Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
Organization: AFNOR
Year: 2003
Status: Active
NF EN ISO 15982
Title:
Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA
Organization: AFNOR
Year: 2003
Status: Active
DIN 4000-34
Title:
Tabular layouts of article characteristics for brakes for rotating motion
Organization: DIN
Year: 1983
Status: Inactive
BS 4185-2
Title:
Specification for Machine Tool Components - Part 2: Collars
Organization: BSI
Status: Active
NS-EN ISO 5845-1:1999
Title:
Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles (ISO 5845-1:1995)
Organization: SN
Year: 1999
Status: Active
DS/ISO 2339
Title:
Taper pins - Unhardened
Organization: DS
Year: 1992
Status: Active
BS EN 4321
Title:
Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification:1 550 Mpa (at ambient temper...
Organization: BSI
Year: 2004
Status: Active
BS ISO 54
Title:
Cylindrical Gears for General Engineering and for Heavy Engineering - Modules
Organization: BSI
Year: 1997
Status: Active
BS PD 6622
Title:
Designation Systems for Steel - Additional Symbols
Organization: BSI
Year: 1998
Status: Inactive
DS/EN 61753-2-1
Title:
Fibre optic interconnecting devices and passive components performance standard - Part 2-1: Fibre optic connectors terminated on single-mode fibre for category U - Uncontrolled environment
Organization: DS
Year: 2001
Status: Active
SN EN ISO 15982
Title:
Open end blind rivets with break pull mandrel and countersunk head - AlA/AlA (ISO 15982:2002)
Organization: SNV
Year: 2003
Status: Active
ISO 6410-1
Title:
Technical Drawings - Screw Threads and Threaded Parts - Part 1: General Conventions
Organization: ISO
Year: 1993
Status: Active
DIN EN 1666
Title:
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread (ISO 12125:1997, modified)
Organization: DIN
Year: 1998
Status: Active
DIN ISO 7632
Title:
Road vehicles; elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 °C max.); identical with ISO 7632, edition 1985
Organization: DIN
Year: 1986
Status: Inactive
BS ISO/TR 10495
Title:
Cylindrical Gears - Calculation of Service Life under Variable Load - Conditions for Cylindrical Gears in Accordance with ISO 6336
Organization: BSI
Year: 1998
Status: Active
NS 75/A.T1:1984
Title:
Widths across flats for hexagon bolts and nuts - Basic dimensions - Amendment
Organization: SN
Year: 1984
Status: Active
NS 5730:1984
Title:
Hexagon nuts, Style 1 - Product grades A and B
Organization: SN
Year: 1984
Status: Inactive
NF EN 10108
Title:
Round steel rod for cold heading and cold extrusion - Dimensions and tolerances
Organization: AFNOR
Year: 2005
Status: Active
VDI/VDE 2253 Blatt 3
Title:
Feinwerkelemente; Sperrungen; Festanschlaege
Organization: VDI
Year: 1971
Status: Inactive
DIN 7989-2
Title:
Washers for steel structures - Part 2: Product grade A
Organization: DIN
Year: 2001
Status: Active
ISO 21269
Title:
Hexagon socket head cap screws with metric fine pitch thread
Organization: ISO
Year: 2004
Status: Inactive
DS/EN 3662-005
Title:
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard
Organization: DS
Year: 2006
Status: Active
BS A 299
Title:
Specification for Procurement of alloy steel protruding head bolts with strength classification 1 250 MPa and MJ threads
Organization: BSI
Year: 1989
Status: Inactive
DIN EN 28738
Title:
Scheiben fuer Bolzen; Produktklasse A (ISO 8738:1986); Deutsche Fassung EN 28738:1992
Organization: DIN
Year: 1992
Status: Active
DIN 3974-1
Title:
Toleranzen fuer Schneckengetriebe-Verzahnungen - Teil 1: Grundlagen
Organization: DIN
Year: 1995
Status: Active
DS/EN ISO 8826-1
Title:
Technical drawings - Rolling bearings - Part 1: General simplified representation
Organization: DS
Year: 1995
Status: Active
BS EN 28744
Title:
Grooved pins - Full-length taper grooved
Organization: BSI
Year: 1989
Status: Inactive
DS/EN 2591-417
Title:
Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection)
Organization: DS
Year: 2001
Status: Active
NF F56-159
Title:
Fixed railway installations. Equipment for overhead telecommunication and signalling lines. Plates for anchoring bars.
Organization: AFNOR
Year: 1978
Status: Active
JIS B 2807
Title:
Grip Ring
Organization: JSA
Year: 1995
Status: Inactive
NF EN ISO 7091
Title:
Plain washers - Normal series - Product grade C
Organization: AFNOR
Year: 2000
Status: Active
DIN ISO 3952-4
Title:
Simplified representation for kinematics - Part 4: Miscellaneous mechanisms and their components; identical with ISO 3952-4:1984
Organization: DIN
Year: 1995
Status: Active
DIN 1480
Title:
Forged turnbuckles, (open type)
Organization: DIN
Year: 2005
Status: Active
JIS B 1005
Title:
General Purpose Bolts and Screws - Metric Series - Radii under the Head
Organization: JSA
Year: 2003
Status: Active
SN EN ISO 14589
Title:
Blind rivets - Mechanical testing (ISO 14589:2000)
Organization: SNV
Year: 2001
Status: Active
NF F01-241
Title:
Railway transport equipment. Tapered cotter pin.
Organization: AFNOR
Year: 1974
Status: Active
NF ISO 21669
Title:
Steel wire ropes - Determination of rotational properties
Organization: AFNOR
Year: 2005
Status: Active
DIN EN ISO 15480
Title:
Hexagon washers head drilling screws with tapping screw thread (ISO 15480:1999); German version EN ISO 15480:1999
Organization: DIN
Year: 2000
Status: Inactive
NF EN 12530
Title:
Castors and wheels. Castors and wheels for manually propelled institutional applications.
Organization: AFNOR
Year: 1998
Status: Active
BS A 301
Title:
Procurement of Corrosion and Heat-Resisting Steel Bolts with Strength Classification 1100 MPa and MJ Threads
Organization: BSI
Year: 1989
Status: Inactive
DIN ISO 1482
Title:
Senk-Blechschrauben mit Schlitz (Einheitskopf); Identisch mit ISO 1482:1983
Organization: DIN
Year: 1990
Status: Inactive
NS-ISO 1580:1983
Title:
Slotted pan head screws - Product grade A (ISO 1580:1983)
Organization: SN
Year: 1988
Status: Inactive
BS 5773-8
Title:
Metric Needle Roller Bearings Part 8: Tolerances of Track Rollers
Organization: BSI
Year: 1983
Status: Inactive
ASTM A531
Title:
STANDARD RECOMMENDED PRACTICE FOR ULTRASONIC EXAMINATION OF TURBINE- GENERATOR STEEL RETAINING RINGS (R 1984) (E1-1984) (E2-1986)
Organization: ASTM
Year: 1974
Status: Inactive
DS/EN ISO 228-1
Title:
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation
Organization: DS
Year: 2003
Status: Active
DS/EN ISO 7085
Title:
Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
Organization: DS
Year: 1999
Status: Inactive
DS/EN ISO 13929
Title:
Small craft - Steering gear - Geared link systems
Organization: DS
Year: 2001
Status: Active
BS 5246
Title:
Specification for Pinion type cutters for spur gears - 1 to 8 metric module
Organization: BSI
Year: 1976
Status: Active
BS 2A 24
Title:
Corrosion-Resisting Steel Hexagon Nuts (B.A. and B.S.F. Threads) (Ordinary, Thin, Slotted and Castle) for Aircraft
Organization: BSI
Status: Active
BS 6013
Title:
Specification for Standard Direction of Movement for Actuators Which Control the Operation of Electrical Apparatus
Organization: BSI
Year: 1980
Status: Inactive
NS 979:1970
Title:
Hexagon castle nuts, Unified - Semifinished - Chamfered - UNF threads 1/4" to 1 1/2"
Organization: SN
Year: 1970
Status: Inactive
DIN 3964
Title:
Deviations of Shaft Centre Distances and Shaft Position Tolerances of Casings for Cylindrical Gears
Organization: DIN
Year: 1980
Status: Active
JIS E 3022
Title:
Testing Methods of Permissible Interference Values for Track Circuit Device
Organization: JSA
Year: 1984
Status: Active
SN EN ISO 16426
Title:
Fasteners - Quality assurance system (ISO 16426:2002)
Organization: SNV
Year: 2003
Status: Active
NF R93-509
Title:
Notched rivets from 1.6 to 5 mm.
Organization: AFNOR
Status: Active
BS EN 1667
Title:
Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
Organization: BSI
Year: 1998
Status: Active
BS EN 3202
Title:
Holes and Traps for T-Head Bolts Design Standards
Organization: BSI
Year: 1995
Status: Active
BS 6466
Title:
Code of practice for Design and installation of ceramic fibre furnace linings
Organization: BSI
Year: 1984
Status: Active
BS ISO 14617-1
Title:
Graphical symbols for diagrams Part 1: General information and indexes
Organization: BSI
Year: 2004
Status: Active
BS EN ISO 21049
Title:
Pumps Shaft sealing systems for centrifugal and rotary pumps
Organization: BSI
Year: 2005
Status: Active
DS/EN 61753-053-3
Title:
Fibre optic interconnecting devices and passive components performance standard - Part 053-3: Continuously variable attenuators for category U - Uncontrolled environment
Organization: DS
Year: 2004
Status: Active
DS/EN ISO 8747
Title:
Grooved pins with countersunk head
Organization: DS
Year: 1998
Status: Active
DIN 85005-6
Title:
Ships and marine technology - Graphical symbols for technical documentation - Part 6: Freshwater distilling unit
Organization: DIN
Year: 1998
Status: Active
NF EN 28839
Title:
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals.
Organization: AFNOR
Year: 1992
Status: Active
BS 6565
Title:
Method for Dimensioning and Designating Bolts, Screws, Studs and Nuts
Organization: BSI
Year: 1985
Status: Inactive
DS/EN 4304
Title:
Aerospace series - Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
Organization: DS
Year: 2005
Status: Active
NS-EN ISO 15973:2000
Title:
Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)
Organization: SN
Year: 2001
Status: Active
DIN EN 12533
Title:
Castors and wheels - Castors and wheels for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h); German version EN 12533:1998
Organization: DIN
Year: 1999
Status: Active
DIN 85005-36
Title:
Ships and marine technology - Graphical symbols for technical documentation - Part 36: Radio equipment, teleprinter and communication systems
Organization: DIN
Year: 1999
Status: Active
DIN 13-4
Title:
General purpose ISO metric screw threads - Nominal sizes for 0,75 mm fine pitch threads with diameters from 5 mm to 110 mm
Organization: DIN
Year: 1999
Status: Active
DIN 85005-12
Title:
Ships and marine technology - Graphical symbols for technical documentation - Part 12: Compressors
Organization: DIN
Year: 1998
Status: Active
BS EN 4459
Title:
Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel Design standard
Organization: BSI
Year: 2005
Status: Active
BS 7568-13
Title:
Press tools - Part 13: Elastomer pressure springs - Specification of accessories
Organization: BSI
Year: 1992
Status: Inactive
BS 2A 100
Title:
Specification for General Requirements for Bolts and Nuts of Strength Not Exceeding 180 000 LbF/Square Inches (125 Hbar)
Organization: BSI
Status: Inactive
DIN 21920-4
Title:
Bergmaennisches Risswerk - Petrographie - Teil 4: Minerale
Organization: DIN
Year: 1996
Status: Active
DIN 16903-3
Title:
Closed Insert Nuts with Dead Hole for Plastics Mouldings
Organization: DIN
Year: 1974
Status: Inactive
ISO 9608
Title:
V-Belts - Uniformity of Belts - Test Method for Determination of Centre Distance Variation
Organization: ISO
Year: 1994
Status: Active
JIS B 0208
Title:
Unified Fine Screw Threads
Organization: JSA
Year: 1973
Status: Active
DIN 3975-2
Title:
Definitions and parameters on cylindrical worm gear pairs with rectangular crossing shafts - Part 2: Deviations
Organization: DIN
Year: 2002
Status: Active
ISO TR 13989-1
Title:
Calculation of Scuffing Load Capacity of Cylindrical, Bevel and Hypoid Gears - Part 1: Flash Temperature Method
Organization: ISO
Year: 2000
Status: Inactive
DS/ISO 4166
Title:
Hexagon nuts for fine mechanics - Product grade F
Organization: DS
Year: 1985
Status: Inactive
NS 5553:1976
Title:
Flat bar clamps, clips - Clamps to grip pipes
Organization: SN
Year: 1976
Status: Active
DS/ISO 6891
Title:
Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics
Organization: DS
Year: 1993
Status: Active
BS EN 2413
Title:
Bolts, Shouldered, Thin Hexagonal Head, Close Tolerance Shank, Short Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235 Degrees C
Organization: BSI
Year: 1995
Status: Active
DIN 2090
Title:
Helical Compression Springs made of Flat Bar Steel; Calculation
Organization: DIN
Year: 1971
Status: Active
NF E27-313
Title:
Round head nib bolts.
Organization: AFNOR
Status: Active
DIN 31692-1
Title:
Lubrication and lubrication monitoring of plain bearings
Organization: DIN
Year: 1996
Status: Active
SN EN ISO 3952-1
Title:
Kinematic diagrams - Graphical symbols - Part 1 (ISO 3952-1:1981)
Organization: SNV
Year: 1995
Status: Active
NS-EN 14811:2006
Title:
Railway applications - Track - Special purpose rail - Grooved and associated construction
Organization: SN
Year: 2006
Status: Inactive
NF E27-414
Title:
Castle nuts.
Organization: AFNOR
Status: Active
DIN EN ISO 16582
Title:
Open end blind rivets with break pull mandrel and protruding head - Cu/St or Cu/Br or Cu/SSt (ISO 16582:2002); German version EN ISO 16582:2002
Organization: DIN
Year: 2003
Status: Active
EN 12532
Title:
Castors and Wheels - Castors and Wheels for Applications up to 1,1 m/s (4km/h)
Organization: CEN
Year: 1998
Status: Active
NS-EN 14399-5:2005
Title:
High-strength structural bolting assemblies for preloading - Part 5: Plain washers - (Corrigendum AC:2006 incorporated)
Organization: SN
Year: 2005
Status: Inactive
DS/EN 10216-1
Title:
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
Organization: DS
Year: 2002
Status: Active
BS 7568-4
Title:
Press Tools Part 4: Compression Springs with Rectangular Section - Housing Dimensions and Colour Coding
Organization: BSI
Year: 1992
Status: Inactive
BS 3A 108
Title:
Specification for Steel Bolts (Unified Hexagons with Unified Threads) with Tolerance Shanks for Aircraft
Organization: BSI
Status: Active
ISO 4385
Title:
Plain Bearings - Compression Testing of Metallic Bearing Materials First Edition
Organization: ISO
Year: 1981
Status: Active
BS 6105
Title:
Corrosion-Resistant Stainless Steel Fasteners
Organization: BSI
Year: 1981
Status: Inactive
DIN 87903-2
Title:
Ships and marine technology - Safety plans for fire fighting, life-saving appliances and means of escape - Part 2: Graphical representation and symbols
Organization: DIN
Year: 1998
Status: Active
DIN 6883
Title:
Taper Key Torque Transmission; Parallel Keys, Dimensions and Application
Organization: DIN
Status: Active
DIN 70810-1
Title:
Nut holders for square nuts, open type
Organization: DIN
Year: 1971
Status: Active
DS/EN 2996-005
Title:
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard
Organization: DS
Year: 2006
Status: Active
DS-håndbog 133.4
Title:
Fasteners - Part 4: Product standards on head cap screws, drilling screws, lifting eye bolts, headless screws and set screws
Organization: DS
Year: 2002
Status: Inactive
DIN 13-6
Title:
General purpose ISO metric screw threads - Nominal sizes for 1,5 mm fine pitch threads with diameters from 12 mm to 300 mm
Organization: DIN
Year: 1999
Status: Active
DS/ISO 7094
Title:
Plain washers - Extra large series - Product grade C
Organization: DS
Year: 1986
Status: Inactive
BS 1877-1
Title:
Specification for domestic bedding. Part 1: Spring interior mattresses for adult use (performance and construction)
Organization: BSI
Year: 1971
Status: Inactive
NF EN ISO 8826-2
Title:
Technical drawings. Rolling bearings. Part 2 : detailed simplified representation.
Organization: AFNOR
Year: 1998
Status: Active
DIN 3017-5
Title:
Schlauchschellen - Teil 5: Breitbandschellen mit Spannbacken; Formen D und E
Organization: DIN
Year: 2002
Status: Active
BS 1832
Title:
Specification for Compressed asbestos fibre jointing
Organization: BSI
Year: 1992
Status: Inactive
DIN 16903-3
Title:
Closed Insert Nuts with Dead Hole for Plastics Mouldings
Organization: DIN
Year: 1974
Status: Inactive
ISO 68
Title:
ISO General Purpose Screw Threads - Basic Profile
Organization: ISO
Year: 1973
Status: Inactive
BS EN 1664
Title:
Prevailing torque type all-metal hexagon nuts with flange
Organization: BSI
Year: 1998
Status: Active
BS 5686
Title:
Specification for Straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
Organization: BSI
Year: 1986
Status: Active
BS 721-2
Title:
Specification for Worm Gearing Part 2. Metric Units
Organization: BSI
Year: 1983
Status: Active
ISO 1749
Title:
Aircraft - Elastomeric Sealing Rings - Packaging and Identification
Organization: ISO
Year: 1973
Status: Inactive
BS ISO TR 10064-3
Title:
Code of inspection practice - Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
Organization: BSI
Year: 1997
Status: Active
NF ISO 8579-1
Title:
Acceptance code for gear units - Part 1 : test code for airborne sound
Organization: AFNOR
Year: 2002
Status: Active
BS EN 28746
Title:
Grooved Pins with Round Head
Organization: BSI
Year: 1989
Status: Inactive
NS-EN ISO 8748:1997
Title:
Spring-type straight pins - Coiled, heavy duty (ISO 8748:1997)
Organization: SN
Year: 1998
Status: Inactive
NF EN 28738
Title:
Plain washers for clevis pins. Product grade A.
Organization: AFNOR
Year: 1992
Status: Active
F50-704
Title:
Fixed railway equipment. Gauges in the world.
Organization: AFNOR
Year: 1987
Status: Active
VDI/VDE 2258
Title:
Feinwerkelemente; Bedienelemente, mechanisch
Organization: DIN
Year: 1987
Status: Inactive
BS EN 28743
Title:
Grooved pins - Half-length centre grooved
Organization: BSI
Year: 1989
Status: Inactive
DIN EN ISO 16585
Title:
Closed end blind rivets with break pull mandrel and protruding head - A2/SSt (ISO 16585:2002)
Organization: DIN
Year: 2003
Status: Active
DIN ISO 4379
Title:
Gleitlager - Buchsen aus Kupferlegierungen; Identisch mit ISO 4379:1993
Organization: DIN
Year: 1995
Status: Active
BS 2931
Title:
Specification for Steel Ankle Joints for Steel Orthopaedic Appliances
Organization: BSI
Status: Inactive
DS/EN 60512-4-1
Title:
Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
Organization: DS
Year: 2003
Status: Active
BS 6129-1
Title:
Code of Practice for The Selection and Application of Bellows Expansion Joints for Use in Pressure Systems - Part 1: Metallic Bellows Expansion Joints
Organization: BSI
Year: 1981
Status: Active
BS 3469
Title:
Instrument Precision Rolling Bearings (Ball Bearings)
Organization: BSI
Year: 1985
Status: Inactive
DS/ISO 3800-1
Title:
Threaded fasteners - Axial load fatigue testing - Part 1: Test methods
Organization: DS
Year: 1988
Status: Inactive
DIN 4000-64
Title:
Tabular layouts of article characteristics for smooth, unprofiled cylinders
Organization: DIN
Year: 1992
Status: Active
BS 6587
Title:
Methods of Acceptance Inspection for Fasteners
Organization: BSI
Year: 1985
Status: Active
ISO 5292
Title:
Belt Drives - V-Belts and V-Ribbed Belts - Calculation of Power Ratings
Organization: ISO
Year: 1995
Status: Active
NS-EN ISO 15984:2002
Title:
Open end blind rivets with break pull mandrel and countersunk head - A2/A2 (ISO 15984:2002)
Organization: SN
Year: 2003
Status: Active
EN ISO 15978
Title:
Open end blind rivets with break pull mandrel and countersunk head AIA/St
Organization: CEN
Year: 2002
Status: Active
DIN 4626
Title:
Center bolts for laminated leaf springs
Organization: DIN
Year: 1986
Status: Active
DS/ISO 3506
Title:
Corrosion-resistant stainless steel fasteners - Specifications
Organization: DS
Year: 1980
Status: Inactive
JIS Z 9201
Title:
Symbol of Heat Balance Diagram
Organization: JSA
Status: Inactive
DIN 32520-1
Title:
Graphical symbols for welding; basic graphical symbols and principles
Organization: DIN
Year: 1987
Status: Inactive
DIN ISO 6524
Title:
Gleitlager - Duennwandige Lagerschalen - Pruefung der Umfangslaenge; Identisch mit ISO 6524:1992
Organization: DIN
Year: 1995
Status: Inactive
NS-EN 13674-4:2006
Title:
Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m
Organization: SN
Year: 2006
Status: Inactive
NF F56-343
Title:
Fixed railway installations. Equipment for overhead electric telecommunication and signalling lines. Elbowed stirrups for securing cross-pieces and sealing rods.
Organization: AFNOR
Year: 1983
Status: Active
DIN EN 2012
Title:
Aerospace - Bearings-airframe rolling, rigid single row ball bearings in steel; diameter series 0 and 2 - Dimensions and loads; inactive for new design; German version EN 2012:1984
Organization: DIN
Year: 1995
Status: Active
NS 5740:1984
Title:
Fasteners - Hexagon products - Widths across flats (ISO 272:1982)
Organization: SN
Year: 1984
Status: Active
DIN 3971
Title:
Definitions and Parameters for Bevel Gears and Bevel Gear Pairs
Organization: DIN
Year: 1980
Status: Active
DS/EN 60512-25-5
Title:
Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss
Organization: DS
Year: 2004
Status: Active
DIN 462
Title:
Machine tools; Internal tab washers for slotted round nuts in conformity with DIN 1804
Organization: DIN
Year: 1973
Status: Active
BS 7492
Title:
Specification for Remote Steering Systems for Small Craft
Organization: BSI
Year: 1991
Status: Inactive
NF L31-083
Title:
Assembly and spot stamping of ball bearings and spherical plain bearings. Spot stamping by spherical indentations with 4 mm diameter ball.
Organization: AFNOR
Year: 1979
Status: Active
DIN 69001-17
Title:
Machine tools; multi-spindle heads; building blocks lubrication pumps form A
Organization: DIN
Year: 1981
Status: Active
DS/ISO 3511-2
Title:
Process measurement control functions and instrumentation - Symbolic representation - Part 2: Extension of basic requirements
Organization: DS
Year: 1988
Status: Active
DIN 31692-5
Title:
Plain bearings - Part 5: Check list for verification of oil tightness
Organization: DIN
Year: 2000
Status: Active
DIN 5472
Title:
Machine Tools; Spline Shafts and Spline Bore Profiles with 6 Splines; Internal Centering, Dimensions
Organization: DIN
Year: 1980
Status: Active
DIN 3015-3
Title:
Halterungsschellen - Schellen in Blockform - Teil 3: Zweifachschellen
Organization: DIN
Year: 1999
Status: Active
NS-EN ISO 2320:1997
Title:
Prevailing torque type steel hexagon nuts - Mechanical and performance requirements (ISO 2320:1997)
Organization: SN
Year: 1998
Status: Inactive
BS 4084
Title:
Aerospace - UNJ Threads, with Controlled Root Radius, for Aerospace - Inch Series
Organization: BSI
Year: 1996
Status: Inactive
DS 96
Title:
Parallel keys - Application and dimensions
Organization: DS
Year: 1975
Status: Active
BS 6168
Title:
Specification for Non-metallic spur gears
Organization: BSI
Year: 1987
Status: Active
ISO 8370-2
Title:
Belt Drives - Dynamic Test to Determine Pitch Zone Location - Part 2: V-Ribbed Belts First Edition
Organization: ISO
Year: 1993
Status: Active
DIN 8141-1
Title:
ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Nominal sizes, tolerances and limits of size
Organization: DIN
Year: 1993
Status: Active
DS/ISO 965-3
Title:
ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads
Organization: DS
Year: 1999
Status: Inactive
BS 7762
Title:
Plain Bearings - Quality Characteristics - Statistical Process Control (SPC)
Organization: BSI
Year: 1994
Status: Inactive
BS 6710
Title:
Specification for Dimensions of chain wheel tooth forming tools
Organization: BSI
Year: 1987
Status: Active
DS/EN 12243
Title:
Touch and close fasteners - Determination of dimensional change in washing and drying and dry cleaning
Organization: DS
Year: 2000
Status: Active
DIN 6340
Title:
Scheiben fuer Spannzeuge
Organization: DIN
Year: 1987
Status: Active
NS-EN ISO 8674:2000
Title:
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999)
Organization: SN
Year: 2001
Status: Inactive
NS-ISO 8747:1986
Title:
Grooved pins with countersunk head
Organization: SN
Year: 1988
Status: Inactive
BS 4168-4
Title:
Hexagon Socket Screws and Wrench Keys: Metric Series Part 4: Specification for Hexagon Socket Set Screws with Dog Point
Organization: BSI
Year: 1994
Status: Inactive
DS/EN 28675
Title:
Hexagon thin nuts with metric fine pitch thread - product grades A and B
Organization: DS
Year: 1992
Status: Inactive
BS A 337
Title:
Nuts, Anchor, Self-Locking, Floating, Single Lug, with Counterbore, with MJ Threads, Classifications: 1 100 MPa (at Ambient Temperature) / 235 Degrees Celsius, 1 100 MPa (at Ambient Temperature) / ...
Organization: BSI
Year: 1999
Status: Active
DIN 189
Title:
Driving Elements; Sole Plates; Main Dimensions
Organization: DIN
Year: 1977
Status: Active
DS/ISO 7092
Title:
Plain washers - Small series - Product grade A
Organization: DS
Year: 1986
Status: Inactive
NS-EN 912:1999
Title:
Timber fasteners - Specifications for connectors for timber (Corrigendum AC:2000 incorporated)
Organization: SN
Year: 2000
Status: Inactive
DS/EN 28740
Title:
Grooved pins - Full length parallel grooved, with chamfer
Organization: DS
Year: 1992
Status: Inactive
NS-EN ISO 21049:2004
Title:
Pumps - Shaft sealing systems for centrifugal and rotary pumps (ISO 21049:2004)
Organization: SN
Year: 2005
Status: Active
DIN 1597
Title:
Light pipe clips with pipe-tightening; double-ended for rail vehicles
Organization: DIN
Year: 1988
Status: Active
ISO TR 14179-1
Title:
Gears - Part 1: Thermal Rating
Organization: ISO
Year: 2001
Status: Active
DS/EN ISO 6410-3
Title:
Technical drawings - Screw threads and threaded parts - Part 3: Simplified representation
Organization: DS
Year: 1996
Status: Active
DS/ISO 7378
Title:
Fasteners - Bolts, screws and studs - Split pin holes and wire holes
Organization: DS
Year: 1984
Status: Active
SN EN ISO 2338
Title:
Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997)
Organization: SNV
Year: 1998
Status: Active
BS 7053
Title:
Specification for Countersunk Head Grooved Pins
Organization: BSI
Year: 1989
Status: Inactive
SN 219505-4
Title:
Gewindeanschluss W 21,8x1/14<Zoll> links; mit Sicherheitsdichtung
Organization: SNV
Year: 1978
Status: Active
BS EN 4013
Title:
Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 550 MPa (at ambient temperature) / 600 degrees C
Organization: BSI
Year: 2005
Status: Active
BS EN 24016
Title:
Hexagon Head Bolts - Product Grade C
Organization: BSI
Year: 1992
Status: Active
DS/ISO/R 885
Title:
Bolts and Screws - Radii under the head for general purpose bolt and screws - Metric series
Organization: DS
Year: 1978
Status: Inactive
NS 5124:1970
Title:
Spiral pins, heavy duty
Organization: SN
Year: 1970
Status: Inactive
DIN 1449
Title:
Conical shaft ends with internal thread; dimensions
Organization: DIN
Year: 1970
Status: Active
BS EN 3139
Title:
Aerospace Series - Rivets, Solid, 100 Degree Countersunk Normal Head, in Corrosion Resisting Steel FE-PA11, Passivated, Inch Based Series
Organization: BSI
Year: 2001
Status: Active
DIN 390
Title:
Handraeder, gekroepft - Nabenloecher mit geradem Vierkant
Organization: DIN
Year: 2002
Status: Inactive
BS EN 2933
Title:
Bolts, T-Head, Relieved Shank, Long Thread, in Heat Resisting Nickel Base Alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at Ambient Temperature)/650 Degrees C
Organization: BSI
Year: 1996
Status: Active
ISO 255
Title:
Belt Drives - Pulleys for V-Belts (System Based on Datum Width) - Geometrical Inspection of Grooves
Organization: ISO
Year: 1990
Status: Active
DS/EN 1667
Title:
Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread
Organization: DS
Year: 1998
Status: Active
DIN 6908
Title:
Conical spring washers for screw and washer assemblies
Organization: DIN
Year: 1995
Status: Active
BS 8298
Title:
Code of Practice for Design and Installation of Natural Stone Cladding and Lining
Organization: BSI
Year: 1995
Status: Inactive
SN EN 13232-1
Title:
Railway applications - Track - Switches and crossings - Part 1: Definitions
Organization: SNV
Year: 2003
Status: Active
DIN ISO 5294
Title:
Synchronous belt drives - Pulleys; Identical with ISO 5294:1989
Organization: DIN
Year: 1996
Status: Inactive
BS EN 3218-007
Title:
Aerospace series Connectors, rectangular, with metallic shells and screw-locking Part 007: Plug with rear-removable size 20 crimp contacts Product standard
Organization: BSI
Year: 2006
Status: Active
DIN 3319
Title:
Handraeder, gekroepft - Nabenloch mit verjuengtem Vierkant
Organization: DIN
Year: 2002
Status: Inactive
DS/EN 4402
Title:
Aerospace series - Lockbolts, 100° countersunk normal head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ...
Organization: DS
Year: 2006
Status: Active
NF E27-170
Title:
General purpose knurled thumbs screws.
Organization: AFNOR
Year: 1974
Status: Active
DIN 40430
Title:
Stahlpanzerrohr-Gewinde; Masse
Organization: DIN
Year: 1971
Status: Active
NF EN ISO 16585
Title:
Closed end blind rivets with pull mandrel and protruding head - A2/SSt
Organization: AFNOR
Year: 2003
Status: Active
NS-EN ISO 2342:2003
Title:
Slotted headless screws with shank (ISO 2342:2003)
Organization: SN
Year: 2004
Status: Active
DIN 80010-2
Title:
Visual display performance marine technology - Part 2: Graphical symbols
Organization: DIN
Year: 1999
Status: Active
BS 1202-2
Title:
Specification for Nails - Part 2: Copper Nails
Organization: BSI
Year: 1974
Status: Active
BS 2HR 502
Title:
Specification for Nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy cold drawn and solution heat treated wire for springs and springs - (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Organization: BSI
Year: 1973
Status: Inactive
NF EN ISO 3952-1
Title:
Kinematic diagrams. Graphical symbols. Part 1.
Organization: AFNOR
Year: 1995
Status: Active
BS 6053
Title:
Outside Diameters of Conduits for Electrical Installations and Threads for Conduits and Fittings
Organization: BSI
Year: 1981
Status: Inactive
VDI 2728 BLATT 1
Title:
Loesung von Bewegungsaufgaben mit symmetrischen Koppelkurven - Uebertragungsaufgaben
Organization: DIN
Year: 1996
Status: Active
DIN EN ISO 4028
Title:
Hexagon socket set screws with dog point (ISO 4028:2003); German version EN ISO 4028:2003
Organization: DIN
Year: 2004
Status: Active
NF L34-420
Title:
Flexible shafts for controlling tachometers, propellor regulators, etc (rech.).
Organization: AFNOR
Status: Active
BS DD 214
Title:
Designation System for Steel: Additional Symbols for Steel Names (ECISS Information Circular 10)
Organization: BSI
Year: 1993
Status: Active
BS 4637
Title:
Specification for Carbon Steel Wire for Coiled Springs - (Bedding and Seating)
Organization: BSI
Year: 1970
Status: Active
DIN 13-26
Title:
ISO general purpose metric screw threads - Part 26: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 252 mm to 1000 mm
Organization: DIN
Year: 2005
Status: Active
DIN 3990-21
Title:
Tragfaehigkeitsberechnung von Stirnraedern; Anwendungsnorm fuer Schnellaufgetriebe und Getriebe aehnlicher Anforderungen
Organization: DIN
Year: 1989
Status: Active
NF F56-336
Title:
Fixed railway installations. Equipment for overhead telecommunication and signalling lines. Fixing plate for cross-pieces of telegraph poles.
Organization: AFNOR
Year: 1978
Status: Active
NF EN ISO 2338
Title:
Parallel pins, of unhardened steel and austenitic stainless steel.
Organization: AFNOR
Year: 1997
Status: Active
SN EN 751-2
Title:
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
Organization: SNV
Year: 1997
Status: Active
DS/EN ISO 2203
Title:
Technical drawings - Conventional representation of gears
Organization: DS
Year: 1998
Status: Active
BS 2A 25
Title:
Specification for Steel hexagonal-headed bolts (B.A. and B.S.F. threads) for aircraft
Organization: BSI
Status: Active
DIN EN ISO 8740
Title:
Grooved pins, full-length parallel grooved, with chamfer (ISO 8740:1997)
Organization: DIN
Year: 1998
Status: Active
NS-EN ISO 8735:1997
Title:
Parallel pins with internal thread, of hardened steel or martensitic stainless steel (ISO 8735:1997)
Organization: SN
Year: 1998
Status: Active
DIN 58520-2
Title:
Bolts for drawing instruments - Part 2: Deep flat countersunk bolt
Organization: DIN
Year: 1996
Status: Inactive
DS/EN 24034
Title:
Hexagon nuts - Product grade C
Organization: DS
Year: 1992
Status: Inactive
BS EN 1515-3
Title:
Flanges and their joints Bolting Part 3: Classification of bolt materials for steel flanges, class designated
Organization: BSI
Year: 2005
Status: Active
EN 12756
Title:
Mechanical Seals - Principal Dimensions, Designation and Material Codes
Organization: CEN
Year: 2000
Status: Active
NF F01-231
Title:
Rolling stock. Articulations with clevis and tenon and with gudgeon. Inner steel rings type as, ag.
Organization: AFNOR
Year: 1984
Status: Active
DS 2063.3
Title:
Tapered shaft ends with external metric thread - Long series
Organization: DS
Year: 1970
Status: Inactive
EN ISO 9222-1
Title:
Technical Drawings - Seals for Dynamic Application - Part 1: General Simplified Representation
Organization: CEN
Year: 1995
Status: Active
BS EN ISO 11593
Title:
Manipulating Industrial Robots - Automatic End Effector Systems - Vocabulary and Presentation of Characteristics
Organization: BSI
Year: 1998
Status: Active
NF F56-002
Title:
Fixed railway installations. Equipment for overhead telecommunication and signalling lines. Reinforced concrete socles.
Organization: AFNOR
Year: 1982
Status: Active
DIN 76-3
Title:
Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
Organization: DIN
Year: 1977
Status: Active
NF F55-201
Title:
Fixed railway equipment. Train announcing program. Graphic symbols.
Organization: AFNOR
Year: 1990
Status: Active
SN EN ISO 15974
Title:
Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)
Organization: SNV
Year: 2001
Status: Active
DIN 118-1
Title:
Driving Elements; Pedestal Plain Bearings for General Mechanical Engineering Applications; Main Dimensions
Organization: DIN
Year: 1977
Status: Active
DIN 31654-3
Title:
Gleitlager; Hydrodynamische Axial-Gleitlager im stationaeren Betrieb; Betriebsrichtwerte fuer die Berechnung von Axial-Kippsegmentlagern
Organization: DIN
Year: 1991
Status: Active
F00-041
Title:
General railway equipment. Fasteners. Synoptical table for standardized products specific to railway rolling stock.
Organization: AFNOR
Year: 1987
Status: Active
DS/ISO 1483
Title:
Slotted raised countersunk (oval) head tapping screws (c ommon head style)
Organization: DS
Year: 1992
Status: Inactive
DS/ISO 8752
Title:
Spring-type straight pins, slotted
Organization: DS
Year: 1993
Status: Inactive
DIN 6888
Title:
Drive Type Fastenings without Taper Action; Woodruff Keys, Dimensions and Application
Organization: DIN
Status: Active
BS 1202-1
Title:
Specification for Nails - Part 1: Steel Nails
Organization: BSI
Year: 2002
Status: Active
BS 3531-5.4
Title:
Implants for Osteosynthesis Part 5: Bone Screws and Auxiliary Equipment Section 5.4: Specification for Screws Having Symmetrical and Asymmetrical Thread and Conical Under-Surfaces
Organization: BSI
Year: 1993
Status: Active
DS/EN 3832
Title:
Aerospace series - Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1550 MPa (at ambient temperature)/650 °C
Organization: DS
Year: 2005
Status: Active
VDI 2727 BLATT 1
Title:
Konstruktionskataloge; Loesung von Bewegungsaufgaben mit Getrieben; Grundlagen
Organization: DIN
Year: 1991
Status: Active
DS/EN 4323
Title:
Aerospace series - Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated - Classification: 900 MPa (at ambient temperature)/350 °C
Organization: DS
Year: 2005
Status: Active
DIN 5287
Title:
Simplex hook spring hooks made of one piece
Organization: DIN
Year: 1972
Status: Active
BS 7644-2
Title:
Direct Tension Indicators - Part 2: Specification for Nut Face and Bolt Face Washers
Organization: BSI
Year: 1993
Status: Inactive
BS EN ISO 10669
Title:
Plain Washers for Tapping Screw and Washer Assemblies - Normal and Large Series - Product Grade A
Organization: BSI
Year: 1999
Status: Active
JIS E 1115
Title:
Spring washers for fish plates
Organization: JSA
Year: 1978
Status: Active
DIN 31653-2
Title:
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of pad thrust bearings
Organization: DIN
Year: 1991
Status: Active
NF R93-506
Title:
Two piece tubular rivets.
Organization: AFNOR
Status: Active
BS 2L 87
Title:
Specification for Hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy - (Solution treated and precipitation treated) (Free from periph...
Organization: BSI
Year: 1971
Status: Inactive
NS-EN ISO 10642:2004
Title:
Hexagon socket countersunk head screws (ISO 10642:2004)
Organization: SN
Year: 2004
Status: Active
DS/ISO 7093
Title:
Plain washers - Large series - Product grades A and C
Organization: DS
Year: 1986
Status: Inactive
DS/EN 2591-424
Title:
Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections
Organization: DS
Year: 2001
Status: Active
BS A 320
Title:
Aerospace - Nuts, Anchor, Self-Locking, Floating, Self-Aligning, Two Lug, with MJ Threads, Classifications: 900 MPa (at Ambient Temperature)/235 Degrees C, 900 MPa (at Ambient Temperature)/315 Degr...
Organization: BSI
Year: 1997
Status: Inactive
DIN EN ISO 15980
Title:
Open end blind rivets with break pull mandrel and countersunk head - St/St (ISO 15980:2002); German version EN ISO 15980:2002
Organization: DIN
Year: 2003
Status: Active
ISO 1964
Title:
Shipbuilding - Indication of Details on the General Arrangement Plans of Ships
Organization: ISO
Year: 1987
Status: Active
NS-EN ISO 10664:2005
Title:
Hexalobular internal driving feature for bolts and screws (ISO 10664:2005)
Organization: SN
Year: 2005
Status: Inactive
DIN 7753-2
Title:
Endlose Schmalkeilriemen fuer den Maschinenbau; Berechnung der Antriebe, Leistungswerte
Organization: DIN
Year: 1976
Status: Active
EN 28747
Title:
Grooved Pins with Countersunk Head
Organization: CEN
Year: 1992
Status: Inactive
DS/EN 1666
Title:
Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread
Organization: DS
Year: 1998
Status: Active
DIN EN 1515-3
Title:
Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated; German version EN 1515-3:2005
Organization: DIN
Year: 2005
Status: Active
DS/EN 28744
Title:
Grooved pins - Full-length taper grooved
Organization: DS
Year: 1992
Status: Inactive
DIN EN 3239
Title:
Luft- und Raumfahrt - Zwoelfkantmuttern, selbstsichernd, aus hochwarmfester Nickelbasislegierung NI-P101HT (Waspaloy), Gewinde versilbert - Klasse: 1210 MPa (bei Raumtemperatur)/730 °C; Deutsche Fa...
Organization: DIN
Year: 1995
Status: Active
BS 5286
Title:
Aluminium Framed Sliding Glass Doors
Organization: BSI
Year: 1978
Status: Active
AFNOR NF EN ISO 7093-2
Title:
Plain washers - Large series - Part 2 : product grade C
Organization: AFNOR
Year: 2000
Status: Active
DIN EN 14665
Title:
Thermal spraying - Thermal sprayed coatings - Symbolic representation on drawings
Organization: DIN
Year: 2005
Status: Inactive
EN 12512
Title:
Timber Structures - Test Methods - Cyclic Testing of Joints Made with Mechanical Fasteners
Organization: CEN
Year: 2001
Status: Active
DIN 3761-1
Title:
Radial-Wellendichtringe fuer Kraftfahrzeuge; Begriffe; Massbuchstaben, zulaessige Abweichungen, Radialkraft
Organization: DIN
Year: 1984
Status: Inactive
BS EN 3065
Title:
Installation Holes for Self-Locking, Serrated Shank Nuts - Design Standard
Organization: BSI
Year: 1996
Status: Active
VDI/VDE 2252 BLATT 8
Title:
Feinwerkelemente, Fuehrungen; Waelzlager und andere Waelzfuehrungen
Organization: DIN
Year: 1976
Status: Inactive
BS EN 14607-7
Title:
Space engineering Mechanical Part 7: Mechanical parts
Organization: BSI
Year: 2005
Status: Inactive
DS/EN 20286-1
Title:
ISO system of limits and fits - Part 1: Bases of tolerances, deviations and fits
Organization: DS
Year: 1993
Status: Inactive
SN EN ISO 2162-2
Title:
Technical product documentation - Springs - Part 2: Presentation of data for cylindrical helical compression springs (ISO 2162-2:1993)
Organization: SNV
Year: 1997
Status: Active
EN ISO 6410-2
Title:
Technical Drawings - Screw Threads and Threaded Parts - Part 2: Screw Thread Inserts
Organization: CEN
Year: 1996
Status: Active
NF R93-508
Title:
Split tubular rivets from 2.5 to 5 mm.
Organization: AFNOR
Status: Active
DIN EN 28737
Title:
Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992
Organization: DIN
Year: 1992
Status: Active
DIN 1143-1
Title:
Round plain head nails for use in automatic nailing machines
Organization: DIN
Year: 1982
Status: Inactive
DIN 3998-2
Title:
Denominations on Gears and Gear Pairs; Cylindrical Gears and Gear Pairs
Organization: DIN
Year: 1976
Status: Active
BS 2A 229
Title:
Specification for Hexagonal head steel bolts 1100 MPa
Organization: BSI
Year: 1972
Status: Active
DS/EN ISO 14588
Title:
Blind rivets - Terminology and definitions
Organization: DS
Year: 2001
Status: Active
DIN 466
Title:
Raendelmuttern, hohe Form
Organization: DIN
Year: 2006
Status: Active