ASTM D3737-08
Title:
Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3767-03(2008)
Title:
Standard Practice for Rubber<span class='unicode'>—</span>Measurement of Dimensions
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4725-08a
Title:
Standard Terminology for Engine Coolants
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5055-08a
Title:
Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6049-03(2008)
Title:
Standard Test Method for Rubber Property-Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5058-90(2001)
Title:
Standard Test Methods for Compatibility of Screening Analysis of Waste
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM E18-08a
Title:
Standard Test Methods for Rockwell Hardness of Metallic Materials <a href="#fn00002"></a>
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E501-08
Title:
Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E524-08
Title:
Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E814-08
Title:
Standard Test Method for Fire Tests of Through-Penetration Fire Stops
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1257-93(2008)
Title:
Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1832-08
Title:
Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1506-08
Title:
Standard Performance Specification for Flame Resistant Textile Materials for Wearing Apparel for Use by Electrical Workers Exposed to Momentary Electric Arc and Related Thermal Hazards
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A36/A36M-08
Title:
Standard Specification for Carbon Structural Steel
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D409-08
Title:
Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7452-08
Title:
Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5059-98
Title:
Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM E1489-08
Title:
Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1551-08
Title:
Standard Specification for Special Purpose, Smooth<span class='unicode'>-</span>Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1844-08
Title:
Standard Specification for A Size 10 <span class='unicode'>×</span> 4<span class='unicode'>-</span>5 Smooth-Tread Friction Test Tire
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2256-03(2008)
Title:
Standard Guide for Hydraulic Integrity of New, Repaired, or Reconstructed Aboveground Storage Tank Bottoms for Petroleum Service
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2314-03(2008)
Title:
Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5537-08
Title:
Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cabl...
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E644-08
Title:
Standard Test Methods for Testing Industrial Resistance Thermometers
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1706-05e1
Title:
Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
Organization: ASTM International
Year: 2005
Status: Inactive
ASTM B243-08a
Title:
Standard Terminology of Powder Metallurgy
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5060-95(2000)
Title:
Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D5061-92(1997)
Title:
Standard Test Method for Microscopical Determination of Volume Percent of Textural Components in Metallurgical Coke
Organization: ASTM International
Year: 1991
Status: Inactive
ASTM D5062-96(2001)
Title:
Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM A790/A790M-01
Title:
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D5063-90(1998)
Title:
Standard Guide for Use of Certification of Coating Conformance Form
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM D5064-01
Title:
Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D5065-01
Title:
Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D5066-91(2001)
Title:
Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D5067-99
Title:
Standard Specification for Artists' Watercolor Paints
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5068-02
Title:
Standard Practice for Preparation of Paint Brushes for Evaluation
Organization: ASTM International
Year: 2002
Status: Inactive
ASTM D5069-92(1997)
Title:
Standard Practice for Preparation of Paint-Roller Covers for Evaluation
Organization: ASTM International
Year: 1991
Status: Inactive
ASTM D5070-90(1997)
Title:
Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D5071-99
Title:
Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM A998/A998M-08
Title:
Standard Practice for Structural Design of Reinforcements for Fittings in Factory<span class='unicode'>-</span>Made Corrugated Steel Pipe for Sewers and Other Applications
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A1003/A1003M-08
Title:
Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2563-08
Title:
Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2584-08
Title:
Standard Test Method for Ignition Loss of Cured Reinforced Resins
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2837-08
Title:
Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3846-08
Title:
Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5932-08
Title:
Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1345-98(2008)
Title:
Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1477-98a(2008)
Title:
Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F626-08
Title:
Standard Specification for Fence Fittings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5072-98
Title:
Standard Test Method for Radon in Drinking Water (Withdrawn 2008)
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM F1085-08
Title:
Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C591-08
Title:
Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1521-08
Title:
Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D449-03(2008)
Title:
Standard Specification for Asphalt Used in Dampproofing and Waterproofing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1414-94(2008)
Title:
Standard Test Methods for Rubber O-Rings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3409-93(2008)
Title:
Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3746-85(2008)
Title:
Standard Test Method for Impact Resistance of Bituminous Roofing Systems
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4989-90a(2008)
Title:
Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6601-02(2008)
Title:
Standard Test Method for Rubber Properties<span class='unicode'>—</span>Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6753-02(2008)
Title:
Standard Specification for Coal Tar Adhesive
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A792/A792M-02
Title:
Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
Organization: ASTM International
Year: 2002
Status: Inactive
ASTM D5073-90(1996)e1
Title:
Standard Practice for Depth Measurement of Surface Water
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM E45-05e2
Title:
Standard Test Methods for Determining the Inclusion Content of Steel
Organization: ASTM International
Year: 2005
Status: Inactive
ASTM E1235-08
Title:
Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F408-99(2008)
Title:
Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F483-08
Title:
Standard Test Method for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F594-08
Title:
Standard Specification for Stainless Steel Nuts
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F921-85(2008)e1
Title:
Standard Terminology Relating to Hemostatic Forceps
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1026-86(2008)e1
Title:
Standard Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1078-87(2008)e1
Title:
Standard Terminology for Surgical Scissors<span class='unicode'>—</span>Inserted and Non-Inserted Blades
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1079-87(2008)e1
Title:
Standard Specification for Inserted and Noninserted Surgical Scissors
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1110-08
Title:
Standard Test Method for Sandwich Corrosion Test
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5074-90(1999)
Title:
Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM F1111-08
Title:
Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1408-97(2008)
Title:
Standard Practice for Subcutaneous Screening Test for Implant Materials
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1613-95(2008)e1
Title:
Standard Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1638-95(2008)e1
Title:
Standard Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1744-96(2008)e1
Title:
Standard Guide for Care and Handling of Stainless Steel Surgical Instruments
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1806-97(2008)
Title:
Standard Practice for Tire Testing Operations-Basic Concepts and Terminology for Reference Tire Use
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1960-08
Title:
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2132-01(2008)e1
Title:
Standard Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2639-08
Title:
Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4485-08
Title:
Standard Specification for Performance of Engine Oils
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5075-01
Title:
Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D7396-08
Title:
Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7422-08
Title:
Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1223-08
Title:
Standard Test Method for Determination of Total Knee Replacement Constraint
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2003-02(2008)
Title:
Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2079-02(2008)
Title:
Standard Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2183-02(2008)
Title:
Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2214-02(2008)
Title:
Standard Test Method for <span class="bdit">In Situ</span> Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2259-03(2008)
Title:
Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (<sup>1</sup>H NMR) Spectroscopy
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2260-03(2008)
Title:
Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (<sup>1</sup>H NMR) Spectroscopy
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5076-90(2000)e1
Title:
Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM C338-93(2008)
Title:
Standard Test Method for Softening Point of Glass
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1042-02(2008)
Title:
Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1041-02(2008)
Title:
Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1735-02(2008)
Title:
Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A795/A795M-08
Title:
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A978/A978M-08
Title:
Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A1058-08
Title:
Standard Test Methods for Mechanical Testing of Steel Products<span class='unicode'>—</span>Metric
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D803-03(2008)
Title:
Standard Test Methods for Testing Tall Oil
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D890-98(2008)
Title:
Standard Test Method for Water in Liquid Naval Stores
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1475-98(2008)
Title:
Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5077-90(1997)
Title:
Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
Organization: ASTM International
Year: 1989
Status: Inactive
ASTM D1653-03(2008)
Title:
Standard Test Methods for Water Vapor Transmission of Organic Coating Films
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1849-95(2008)
Title:
Standard Test Method for Package Stability of Paint
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2243-95(2008)
Title:
Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3456-86(2008)
Title:
Standard Practice for Determining by Exterior Exposure Tests the Susceptibility of Paint Films to Microbiological Attack
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4828-94(2008)
Title:
Standard Test Methods for Practical Washability of Organic Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5401-03(2008)
Title:
Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5588-97(2008)
Title:
Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5795-95(2008)
Title:
Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via<br> <span class='unicode'>“</span>Cobb Ring<span class='unicode'...
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5895-03(2008)
Title:
Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6090-99(2008)
Title:
Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5078-95(2000)
Title:
Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D6165-97(2008)
Title:
Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6189-97(2008)
Title:
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6686-01(2008)e1
Title:
Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1782-08
Title:
Standard Test Method for Determining Vapor Pressure by Thermal Analysis
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1898-08
Title:
Standard Specification for Helmets for Non-Motorized Wheeled Vehicle Used by Infants and Toddlers
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5079-02
Title:
Standard Practices for Preserving and Transporting Rock Core Samples
Organization: ASTM International
Year: 2002
Status: Inactive
ASTM D5080-00
Title:
Standard Test Method for Rapid Determination of Percent Compaction
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D5081-90(1999)e1
Title:
Standard Test Method for Aggregate Layer Hiding Power
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5083-02
Title:
Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
Organization: ASTM International
Year: 2002
Status: Inactive
ASTM E1743-96
Title:
Standard Practice for Selection and Use of Portable Retroreflectomers for the Measurement of Pavement Marking Materials (Withdrawn 2003)
Organization: ASTM International
Year: 1996
Status: Inactive
ASTM A793-96(2001)
Title:
Standard Specification for Rolled Floor Plate, Stainless Steel
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM D5084-00e1
Title:
Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D5085-95
Title:
Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography
Organization: ASTM International
Year: 1994
Status: Inactive
ASTM D5086-01
Title:
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D5087-02
Title:
Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)
Organization: ASTM International
Year: 2002
Status: Inactive
ASTM D5088-02
Title:
Standard Practice for Decontamination of Field Equipment Used at Nonradioactive Waste Sites
Organization: ASTM International
Year: 2002
Status: Inactive
ASTM C1063-11a
Title:
Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
Organization: ASTM International
Year: 2011
Status: Inactive
ASTM D1348-94(2008)
Title:
Standard Test Methods for Moisture in Cellulose (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5089-95(1999)
Title:
Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D1439-03(2008)e1
Title:
Standard Test Methods for Sodium Carboxymethylcellulose
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4085-93(2008)
Title:
Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4730-02(2008)
Title:
Standard Specification for Flooding Compounds for Telecommunications Wire and Cable
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4795-94(2008)
Title:
Standard Test Method for Nitrogen Content of Soluble Nitrocellulose<span class='unicode'>—</span>Alternative Method (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5166-97(2008)
Title:
Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5400-03(2008)
Title:
Standard Test Methods for Hydroxypropylcellulose
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6188-97(2008)
Title:
Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6887-03(2008)
Title:
Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6942-03(2008)
Title:
Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6989-03(2008)
Title:
Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5090-90(2001)
Title:
Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM E2126-08
Title:
Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A325M-08
Title:
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2200-08
Title:
Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2633-08
Title:
Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7451-08
Title:
Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1921-08a
Title:
Standard Test Method for Determination of Reference Temperature, <span class="bdit">T<sub>o</sub></span>, for Ferritic Steels in the Transition Range
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2617-08
Title:
Standard Practice for Validation of Empirically Derived Multivariate Calibrations
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C603-04(2008)
Title:
Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C792-04(2008)
Title:
Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C907-03(2008)
Title:
Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5091-95(2001)
Title:
Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM C1016-02(2008)
Title:
Standard Test Method for Determination of Water Absorption of Sealant Backing<br> (Joint Filler) Material
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1183-04(2008)
Title:
Standard Test Method for Extrusion Rate of Elastomeric Sealants
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1216-03
Title:
Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
Organization: ASTM International
Year: 2003
Status: Inactive
ASTM C1216-03(2008)
Title:
Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1394-03(2008)
Title:
Standard Guide for In-Situ Structural Silicone Glazing Evaluation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1534-95(2008)
Title:
Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1698-03(2008)
Title:
Standard Test Method for Sediments and Soluble Sludge in Service-Aged Insulating Oils (Withdrawn 2014)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1933-03(2008)
Title:
Standard Specification for Nitrogen Gas as an Electrical Insulating Material
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6073-08a
Title:
Standard Test Method for Relative Setting of Heatset Printing Inks
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6938-08a
Title:
Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5092-90(1995)e1
Title:
Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM E826-08
Title:
Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A343/A343M-03(2008)
Title:
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A839-02(2008)
Title:
Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A867-03(2008)
Title:
Standard Specification for Iron-Silicon Relay Steels
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A889/A889M-03(2008)
Title:
Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A893/A893M-03(2008)
Title:
Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C359-08
Title:
Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C451-08
Title:
Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4446-08
Title:
Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2619-08
Title:
Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5093-90(1997)
Title:
Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM E2630-08
Title:
Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A794-97
Title:
Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
Organization: ASTM International
Year: 1996
Status: Inactive
ASTM D5094-90(1997)
Title:
Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D5095-91(2002)
Title:
Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
Organization: ASTM International
Year: 1991
Status: Inactive
ASTM D5096-96
Title:
Standard Test Method for Determining the Performance of a Cup Anemometer or Propeller Anemometer
Organization: ASTM International
Year: 1996
Status: Inactive
ASTM D5097-90(1996)
Title:
Standard Test Method for Filter-Retained Solids Content of Polymer Latexes (Withdrawn 2004)
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM D5098-99
Title:
Standard Specification for Artists' Acrylic Emulsion Paints
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM C221-98(2008)
Title:
Standard Specification for Corrugated Asbestos-Cement Sheets
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C222-97(2008)
Title:
Standard Specification for Asbestos-Cement Roofing Shingles
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C223-98(2008)
Title:
Standard Specification for Asbestos-Cement Siding
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5099-93(1998)
Title:
Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM C659-90(2008)
Title:
Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C663-98(2008)
Title:
Standard Specification for Asbestos-Cement Storm Drain Pipe
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C668-98(2008)
Title:
Standard Specification for Asbestos-Cement Transmission Pipe
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2522-03(2008)
Title:
Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E170-08c
Title:
Standard Terminology Relating to Radiation Measurements and Dosimetry
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E423-71(2008)
Title:
Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A924/A924M-08
Title:
Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C43-08
Title:
Standard Terminology of Structural Clay Products (Withdrawn 2009)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C725-90(2008)
Title:
Standard Specification for Semidense Mineral Fiber Siding
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5100-95a(2000)e1
Title:
Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM C746-90(2008)
Title:
Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C875-98(2008)
Title:
Standard Specification for Asbestos-Cement Conduit
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C966-98(2008)
Title:
Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1080-98(2008)
Title:
Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1081-98(2008)
Title:
Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1082-98(2008)
Title:
Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1430-03(2008)
Title:
Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3034-08
Title:
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3296-03(2008)
Title:
Standard Specification for FEP-Fluorocarbon Tube
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4765-03(2008)
Title:
Standard Test Method for Fluorides in Workplace Atmospheres
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5101-01
Title:
Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D4943-08
Title:
Standard Test Method for Shrinkage Factors of Soils by the Wax Method (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5012-01(2008)
Title:
Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5086-01(2008)
Title:
Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5149-02(2008)
Title:
Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5156-02(2008)
Title:
Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5157-97(2008)
Title:
Standard Guide for Statistical Evaluation of Indoor Air Quality Models
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5756-02(2008)
Title:
Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5952-08
Title:
Standard Guide for the Inspection of Water Systems for Legionella and the Investigation of Possible Outbreaks of Legionellosis (Legionnaires' Disease or Pontiac Fever)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6177-97(2008)e1
Title:
Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5103-01
Title:
Standard Test Method for Length and Length Distribution of Manufactured Staple Fibers (Single-Fiber Test)
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D6178-97(2008)
Title:
Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6272-02(2008)e1
Title:
Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6329-98(2008)
Title:
Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6784-02(2008)
Title:
Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6830-02(2008)
Title:
Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7400-08
Title:
Standard Test Methods for Downhole Seismic Testing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F477-08
Title:
Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A474-03(2008)
Title:
Standard Specification for Aluminum-Coated Steel Wire Strand
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A740-98(2008)
Title:
Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A862/A862M-98(2008)
Title:
Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5104-96
Title:
Standard Test Method for Shrinkage of Textile Fibers (Single-Fiber Test)
Organization: ASTM International
Year: 1996
Status: Inactive
ASTM A926-03(2008)
Title:
Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1528-08
Title:
Standard Guide for Selection of Dimension Stone for Exterior Use
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1552-08
Title:
Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1655-08a
Title:
Standard Specification for Aviation Turbine Fuels
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5452-08
Title:
Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6630-08
Title:
Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E514-08
Title:
Standard Test Method for Water Penetration and Leakage Through Masonry
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1628-94(2008)
Title:
Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration (Withdrawn 2014)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F783-88(2008)
Title:
Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F819-08
Title:
Standard Terminology Relating to Electrical Protective Equipment for Workers
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A795-00
Title:
Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D5105-94(1999)
Title:
Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM F934-96(2008)
Title:
Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1345-96(2008)
Title:
Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1379-95(2008)
Title:
Standard Terminology Relating to Barbed Tape
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1458-04(2008)
Title:
Standard Test Method for Measurement of Cut Resistance to Chain Saw of Foot Protective Devices
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1716-96(2008)
Title:
Standard Guide for Transition and Performance of Marine Software Systems Maintenance
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1731-96(2008)
Title:
Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1756-97a(2008)
Title:
Standard Guide for Implementation of a Fleet Management System Network (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1757-96(2008)
Title:
Standard Guide for Digital Communication Protocols for Computerized Systems
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1808-03(2008)
Title:
Standard Guide for Weight Control Technical Requirements for Surface Ships
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1883-03(2008)
Title:
Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5106-99
Title:
Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM F1910-98(2008)
Title:
Standard Specification for Long Barbed Tape Obstacles
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2168-02(2008)
Title:
Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2191-02(2008)
Title:
Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2218-02(2008)
Title:
Standard Guide for Hardware Implementation for Computerized Systems
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2582-08
Title:
Standard Test Method for Impingement of Acetabular Prostheses
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2622-08e1
Title:
Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5107-90(1997)
Title:
Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D5108-90(1996)
Title:
Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water
Organization: ASTM International
Year: 1996
Status: Inactive
ASTM D5109-99
Title:
Standard Test Methods for Copper-Clad Thermosetting Laminates for Printed Wiring Boards
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5110-98
Title:
Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM D5111-99
Title:
Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5112-98
Title:
Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM D5113-97
Title:
Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D5114-90(1998)
Title:
Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
Organization: ASTM International
Year: 1989
Status: Inactive
ASTM A1056-08
Title:
Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1346-08
Title:
Standard Practice for Dissolution of UF<sub>6</sub> from P-10 Tubes
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5504-08
Title:
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6683-08
Title:
Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7379-08
Title:
Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7388-08
Title:
Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E458-08
Title:
Standard Test Method for Heat of Ablation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A796/A796M-01
Title:
Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D5115-90(1996)
Title:
Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM E580/E580M-08
Title:
Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2724-08
Title:
Standard Test Method for Evaluating Mobile Bearing Knee Dislocation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2022-89(2008)
Title:
Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2180-89(2008)
Title:
Standard Test Method for Active Oxygen in Bleaching Compounds
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7219-08
Title:
Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1265-03a(2008)
Title:
Standard Test Method for Resistance to Impact for Resilient Floor Tile
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1514-03(2008)
Title:
Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1515-03(2008)
Title:
Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2722-08
Title:
Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2723-08
Title:
Standard Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5116-97
Title:
Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products (Withdrawn 2006)
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM B439-08
Title:
Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C172-08
Title:
Standard Practice for Sampling Freshly Mixed Concrete
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C231-08b
Title:
Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1679-08
Title:
Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D128-98(2008)
Title:
Standard Test Methods for Analysis of Lubricating Grease
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D885-07e1
Title:
Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers
Organization: ASTM International
Year: 2007
Status: Inactive
ASTM D972-02(2008)
Title:
Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1404/D1404M-99(2008)
Title:
Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1748-02(2008)
Title:
Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2300-08
Title:
Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5117-96
Title:
Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM D4602-93(2008)
Title:
Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4695-03(2008)
Title:
Standard Guide for General Pavement Deflection Measurements
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5858-96(2008)
Title:
Standard Guide for Calculating <span class="italic">In Situ</span> Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6194-08
Title:
Standard Test Method for Glow-Wire Ignition of Materials
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6878-08
Title:
Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E241-08
Title:
Standard Guide for Limiting Water-Induced Damage to Buildings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E303-93(2008)
Title:
Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E415-08
Title:
Standard Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E445/E445M-88(2008)
Title:
Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E814-08a
Title:
Standard Test Method for Fire Tests of Penetration Firestop Systems
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5118/D5118M-95(2001)
Title:
Standard Practice for Fabrication of Fiberboard Shipping Boxes
Organization: ASTM International
Year: 1995
Status: Inactive
ASTM E1274-03(2008)
Title:
Standard Test Method for Measuring Pavement Roughness Using a Profilograph
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1893-08
Title:
Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1926-08
Title:
Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F615M-95(2008)
Title:
Standard Practice for Determining Safe Current Pulse-Operating Regions for Metallization on Semiconductor Components (Metric)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1709-97(2008)
Title:
Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1711-96(2008)
Title:
Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C822-08a
Title:
Standard Terminology Relating to Concrete Pipe and Related Products
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM B108/B108M-08
Title:
Standard Specification for Aluminum-Alloy Permanent Mold Castings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM B618/B618M-08
Title:
Standard Specification for Aluminum-Alloy Investment Castings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5119-00
Title:
Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM C1037-08
Title:
Standard Practice for Inspection of Underground Precast Concrete Utility Structures
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1232-08
Title:
Standard Terminology of Masonry
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D480-88(2008)
Title:
Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1301-91(2008)
Title:
Standard Test Methods for Chemical Analysis of White Lead Pigments
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1648-86(2008)
Title:
Standard Specification for Basic Lead Silicochromate Pigment
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2275-01(2008)e1
Title:
Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6092-97(2008)
Title:
Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6765-02(2008)
Title:
Standard Practice for Live Staking
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1337-90(2008)
Title:
Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1778-98a(2008)
Title:
Standard Terminology Relating to Pavement Distress
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5120-90(1995)e1
Title:
Standard Test Method for Inhibition of Respiration in Microbial Cultures in the Activated Sludge Process
Organization: ASTM International
Year: 1994
Status: Inactive
ASTM F2055-00(2008)
Title:
Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C191-08
Title:
Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C490/C490M-08
Title:
Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C841-03(2008)e1
Title:
Standard Specification for Installation of Interior Lathing and Furring
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1674-08
Title:
Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1474-98(2008)
Title:
Standard Test Methods for Indentation Hardness of Organic Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2454-08
Title:
Standard Practice for Determining the Effect of Overbaking on Organic Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4787-08
Title:
Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5010-08a
Title:
Standard Guide for Testing Printing Inks and Related Materials
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5162-08
Title:
Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5121-90(2001)
Title:
Standard Practice for Preparation of Rock Slabs for Durability Testing
Organization: ASTM International
Year: 1990
Status: Inactive
ASTM D5178-98(2008)
Title:
Standard Test Method for Mar Resistance of Organic Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5179-02(2008)
Title:
Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5682-08
Title:
Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6037-96(2008)
Title:
Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6166-08
Title:
Standard Test Method for Color of Naval Stores and Related Products (Instrumental Determination of Gardner Color)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6488-08
Title:
Standard Terminology Relating to Print Problems
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6695-08
Title:
Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6905-03(2008)
Title:
Standard Test Method for Impact Flexibility of Organic Coatings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E135-08b
Title:
Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F519-08
Title:
Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5124-96(2001)
Title:
Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM F1262M-95(2008)
Title:
Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM UOP905-08
Title:
Platinum Agglomeration by X-Ray Diffraction
Organization: ASTM International
Year: 2008
Status: Active
ASTM C923M-08a
Title:
Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D351-97(2008)e1
Title:
Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D352-97(2008)e1
Title:
Standard Test Methods for Pasted Mica Used in Electrical Insulation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2131-97(2008)e1
Title:
Standard Classification for Natural Muscovite Mica Splittings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4070-08
Title:
Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4576-01(2006)e1
Title:
Standard Test Method for Mold Growth Resistance of Wet Blue
Organization: ASTM International
Year: 2006
Status: Inactive
ASTM D4731-02(2008)e1
Title:
Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4732-02(2008)e1
Title:
Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5125-97
Title:
Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D6097-01a(2008)e1
Title:
Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6132-08
Title:
Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5126-90(1998)e1
Title:
Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in the Vadose Zone
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM A798/A798M-01
Title:
Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D5127-99
Title:
Standard Guide for Ultra Pure Water Used in the Electronics and Semiconductor Industry
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5128-90(1999)e1
Title:
Standard Test Method for On-Line pH Measurement of Water of Low Conductivity
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5129-95(1999)
Title:
Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5130-95(1999)
Title:
Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM D5131-90(2001)
Title:
Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D5132-93(1994)e1
Title:
Standard Test Method for Horizontal Burning Rate of Flexible Cellular and Rubber Materials Used in Occupant Compartments of Motor Vehicles
Organization: ASTM International
Year: 1993
Status: Inactive
ASTM C168-08
Title:
Standard Terminology Relating to Thermal Insulation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C287-98(2008)e1
Title:
Standard Specification for Chemical-Resistant Sulfur Mortar
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C307-03(2008)
Title:
Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C386-93(2008)
Title:
Standard Practice for Use of Chemical-Resistant Sulfur Mortar
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C398-98(2008)
Title:
Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C414-03(2008)
Title:
Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C466-03(2008)
Title:
Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C580-02(2008)
Title:
Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5133-01
Title:
Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM C658-98(2008)
Title:
Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C723-98(2008)
Title:
Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C811-98(2008)
Title:
Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings (Withdrawn 2012)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C868-02(2008)
Title:
Standard Test Method for Chemical Resistance of Protective Linings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1159-98(2008)
Title:
Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1160-97(2008)
Title:
Standard Specification for Chemical-Resistant Carbon Brick
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1312-97(2008)
Title:
Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1339-02(2008)
Title:
Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1486-00(2008)
Title:
Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1621/C1621M-08
Title:
Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5134-98
Title:
Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM D2148-02(2008)e1
Title:
Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2377-00(2008)
Title:
Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E307-72(2008)
Title:
Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E408-71(2008)
Title:
Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2018-08
Title:
Standard Guide for Property Condition Assessments: Baseline Property Condition Assessment Process
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2192-08
Title:
Standard Guide for Planar Flaw Height Sizing by Ultrasonics
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2606-08
Title:
Standard Practice for Receipt Notification as a Result of Tangible Property Movement
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2607-08
Title:
Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1440-92(2008)
Title:
Standard Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion (Withdrawn 2012)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1714-96(2008)
Title:
Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5135-95
Title:
Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
Organization: ASTM International
Year: 1994
Status: Inactive
ASTM C399-98(2008)e1
Title:
Standard Practice for Use of Chemical-Resistant Resin Mortars
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1338-08
Title:
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1435/C1435M-08
Title:
Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D451-91(2008)
Title:
Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D452-91(2008)
Title:
Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4032-08
Title:
Standard Test Method for Stiffness of Fabric by the Circular Bend Procedure
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4716-08
Title:
Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5001-08
Title:
Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5334-08
Title:
Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5722-08
Title:
Standard Practice for Performing Accelerated Outdoor Weathering of Factory- Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5136-00
Title:
Standard Specification for High Purity p-Xylene
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D5887-08
Title:
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6890-08
Title:
Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6934-08
Title:
Standard Test Method for Residue by Evaporation of Emulsified Asphalt
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7408-08
Title:
Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E428-08
Title:
Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F92-93(2008)
Title:
Standard Practice for Determination of Character Yield of Inked Fabric Typewriter and Printer Ribbons (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F597-83(2008)
Title:
Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F627-99(2008)
Title:
Standard Practice for Testing Flake of Single-Strike Film Typewriter Ribbons (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F843-98(2008)
Title:
Standard Test Method for Assessing the Color Strength and Dispersibility of Alkali Blue Pigment in Hot Melt Carbon Copy Paper Ink (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F854-83(2008)
Title:
Standard Test Method for Cleanliness of Carbon Paper (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM A799/A799M-92(2002)
Title:
Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
Organization: ASTM International
Year: 1992
Status: Inactive
ASTM D5137-01
Title:
Standard Specification for Hexyl Acetate
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM F1151-88(2008)
Title:
Standard Test Method for Determining Variations in Hardness of Film Ribbon Pancakes (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1225-99(2008)
Title:
Standard Test Method for Measuring the Ribbon Exit Force for Film and Fabric Cartridges (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1232-98(2008)
Title:
Standard Practice for Generating a Test Pattern for Single-Pass Film Ribbons (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1520-94(2008)
Title:
Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1943-98(2008)
Title:
Standard Test Method for Determining the Dynamic Thermal Response of Thermal Mass Transfer Ribbon Products<span class='unicode'>—</span>Atlantek Method (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1944-98(2008)
Title:
Standard Practice for Determining the Quality of the Text, Line- and Solid-Fill Output Produced by Ink Jet Printers (Withdrawn 2016)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2292-03(2008)
Title:
Standard Practice for Determining the Waterfastness of Images Produced by Ink Jet Printers Utilizing Four Different Test Methods<span class='unicode'>—</span>Drip, Spray, Submersion and Rub ...
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2293-03(2008)
Title:
Standard Practice for Determining the Stain Resistance of Images Produced by Ink Jet Printers (Withdrawn 2016)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM UOP551-08
Title:
C<sub>6</sub> and Lower Boiling Hydrocarbons in Olefin Free Naphthas by GC
Organization: ASTM International
Year: 2008
Status: Active
ASTM UOP880-08
Title:
Hydrocarbon Types and Distributions in Low Olefin C<sub>12</sub> and Lower Endpoint Distillates by GC
Organization: ASTM International
Year: 2008
Status: Active
ASTM D5138-99a
Title:
Standard Specification for Liquid Crystal Polymers
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM C1176/C1176M-08
Title:
Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1329-08
Title:
Standard Test Method for Evaluating Rubber Property<span class='unicode'>—</span>Retraction at Lower Temperatures (TR Test)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2845-08
Title:
Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2936-08
Title:
Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3967-08
Title:
Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7115-08
Title:
Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7460-08
Title:
Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1836-08
Title:
Standard Practice for Building Floor Area Measurements for Facility Management
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2626-08
Title:
Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1492-08
Title:
Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5139-90(2001)
Title:
Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants (Withdrawn 2010)
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM F2649-08a
Title:
Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM B930-03(2008)
Title:
Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C110-08
Title:
Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C266-08
Title:
Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C807-08
Title:
Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1381/C1381M-97(2008)e1
Title:
Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM C1546-02(2008)e1
Title:
Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D1732-03(2008)
Title:
Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2512-95(2008)
Title:
Standard Test Method for Compatibility of Materials with Liquid Oxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D2726-08
Title:
Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5140-95
Title:
Standard Guide for Testing Polyurethane "Poured in Place" Thermal Break Materials (Withdrawn 2004)
Organization: ASTM International
Year: 1994
Status: Inactive
ASTM D4158-08
Title:
Standard Guide for Abrasion Resistance of Textile Fabrics (Uniform Abrasion)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5034-08
Title:
Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5446-08
Title:
Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5822-08
Title:
Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6476-08
Title:
Standard Test Method for Determining Dynamic Air Permeability of Inflatable Restraint Fabrics
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6478-08
Title:
Standard Test Method for Determining Specific Packability of Fabrics Used in Inflatable Restraints
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6479-08
Title:
Standard Test Method for Determining the Edgecomb Resistance of Woven Fabrics Used in Inflatable Restraints
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1445-08
Title:
Standard Terminology Relating to Hazard Potential of Chemicals
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1488-08
Title:
Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E1610-02(2008)
Title:
Standard Guide for Forensic Paint Analysis and Comparison
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5141-96(1999)
Title:
Standard Test Method for Determining Filtering Efficiency and Flow Rate of a Geotextile for Silt Fence Application Using Site-Specific Soil
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM E2227-02(2008)
Title:
Standard Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM E2289-08
Title:
Standard Guide for Examination of Rubber Stamp Impressions (Withdrawn 2017)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F1454-99(2008)
Title:
Standard Practice for Comparing Correctable Film Ribbons (Withdrawn 2015)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM G125-00(2008)
Title:
Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM G127-95(2008)
Title:
Standard Guide for the Selection of Cleaning Agents for Oxygen Systems
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2726-08
Title:
Standard specification for fixation devices for tracheal tubes and other airway devices
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D448-08
Title:
Standard Classification for Sizes of Aggregate for Road and Bridge Construction
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D6087-08
Title:
Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D7000-08
Title:
Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2078-08a
Title:
Standard Terminology Relating to Hydrogen Embrittlement Testing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5142-90(1998)
Title:
Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM F2225-08
Title:
Standard Safety Specification for Consumer Trampoline Enclosures
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2735-08
Title:
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM F2373-08
Title:
Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D5143-90(1998)
Title:
Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D5144-00
Title:
Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
Organization: ASTM International
Year: 2000
Status: Inactive
ASTM D5145-90(1997)
Title:
Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D5146-98
Title:
Standard Guide to Testing Solvent-Borne Architectural Coatings
Organization: ASTM International
Year: 1998
Status: Inactive
ASTM A800/A800M-01
Title:
Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D5147-01a
Title:
Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
Organization: ASTM International
Year: 2001
Status: Inactive
ASTM D5148-97
Title:
Standard Test Method for Centrifuge Kerosine Equivalent
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D5149-95
Title:
Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence
Organization: ASTM International
Year: 1994
Status: Inactive
ASTM D5150-92(1997)e1
Title:
Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
Organization: ASTM International
Year: 1997
Status: Inactive
ASTM D5151-99
Title:
Standard Test Method for Detection of Holes in Medical Gloves
Organization: ASTM International
Year: 1999
Status: Inactive
ASTM C1262-08
Title:
Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D3492-08
Title:
Standard Specification for Rubber Contraceptives (Male Condoms)
Organization: ASTM International
Year: 2008
Status: Inactive
ASTM D4395-08
Title:
Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
Organization: ASTM International
Year: 2008
Status: Inactive
See more:
1
50
100
140
150
160
170
180
190
192
193
194
195
196
197
198
199
200
201
202
203
204
210
220
230
240
250
260
300
350
400
450
467