UNE 20634
Title:
Dimensions for the mounting of single-hole, bush-mounted, spindle-operated electronic components
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60928/A1
Title:
Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements.
Organization: AENOR
Year: 2000
Status: Inactive
UNE 20354/2M
Title:
HIGH-PRESSURE MERCURY VAPOUR LAMPS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60749/A2
Title:
Semiconductor devices - Mechanical and climatic test methods.
Organization: AENOR
Year: 2002
Status: Inactive
UNE 71203
Title:
INFORMATION TECHNOLOGY. DATA COMMUNICATION. 15-POLE DTE/DCE INTERFACE CONNECTOR AND CONTACT NUMBER ASIGNMENTS.
Organization: AENOR
Year: 1998
Status: Active
UNE 20501-2-41
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 2. TESTS. TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS
Organization: AENOR
Year: 1979
Status: Inactive
UNE-EN 50294/A2
Title:
Measurement method of total input power of ballast-lamp circuits
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60512-11-13
Title:
Connectors for electronic equipment - Tests and measurement -- Part 11-13: Climatic tests - Test 11n: Gas tightness, solderless wrapped connections.
Organization: AENOR
Year: 2003
Status: Active
UNE 20501-2-9/1C
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. GUIDANCE FOR SOLAR RADIATION TESTING
Organization: AENOR
Year: 1989
Status: Inactive
UNE-EN 60061-2/A33
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders (IEC 60061-2:1969/A33:2005)
Organization: AENOR
Year: 2006
Status: Active
UNE-EN 60749-34
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 34: Power cycling
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 60603-6
Title:
Connectors for frequencies below 3 MHz for use with printed boards -- Part 6: Edge-socket connectors and printed-board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided pr...
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60249-2-3/A3
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 3: EPOXIDE CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Active
UNE 20067/1M
Title:
STARTING DEVICES (OTHER THAN GLOW STARTERS). PERFORMANCE REQUIREMENTS.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 60925
Title:
D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS. PERFORMANCE REQUIREMENTS.
Organization: AENOR
Year: 1994
Status: Inactive
UNE 20545-5-1
Title:
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT. PART 5: BLANK DETAIL SPECIFICATION: FIXED PRECISION RESISTORS. ASSESSMENT LEVEL E
Organization: AENOR
Year: 1985
Status: Inactive
UNE 20501-2-45
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 2: TESTS. TEST XA AND GUIDANCE: INMERSION IN CLEANING SOLVENTS
Organization: AENOR
Year: 1983
Status: Inactive
UNE-EN 60061-1/A39
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps (IEC 60061-1:1969/A39:2007).
Organization: AENOR
Year: 2007
Status: Active
UNE 20356-1/1M
Title:
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60061-1/A26
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps.
Organization: AENOR
Year: 2001
Status: Active
UNE-IEC/TS 61827
Title:
Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 60061-3/A34
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges (IEC 60061-3:1969/A34:2004)
Organization: AENOR
Year: 2006
Status: Active
UNE-EN 61249-7-1
Title:
MATERIALS FOR INTERCONNECTION STRUCTURES. PART 7: SECTIONAL SPECIFICATION SET FOR RESTRAINING CORE MATERIALS. SECTION 1: COPPER/INVAR/COPPER.
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 60249-2-5/A4
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 5: EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Inactive
UNE 20501-2-1/1C
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST A: COLD
Organization: AENOR
Year: 1986
Status: Inactive
UNE 21136-7
Title:
ELECTRICAL RELAYS. TEST AND MEASUREMENT PROCEDURES FOR ELECTROMECHANICAL ALL-OR-NOTHING RELAYS.
Organization: AENOR
Year: 1990
Status: Active
UNE-EN 60249-2-10
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 10: EPOXIDE NON-WOVEN/WOVEN GLASS REINFORCED COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILIY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Active
UNE-EN ISO 11810-2
Title:
Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007)
Organization: AENOR
Year: 2010
Status: Inactive
UNE 20057-7
Title:
TWO PIN CAP G5, G13, G19, G20, LAMPHOLDER AND GANGES FOR FLUORESCENT TUBULAR LAMPS.
Organization: AENOR
Year: 1978
Status: Inactive
UNE-EN 60512-11-5
Title:
Connectors for electronic equipment - Tests and measurements -- Part 11-5: Climatic tests - Test 11e: Mould growth.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 60249-2-14
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 14: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), ECONOMIC QUAL...
Organization: AENOR
Year: 1996
Status: Active
UNE-EN ISO 13697
Title:
Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 61249-2-11 CORR
Title:
Materials for printed boards and other interconnecting structures -- Part 2-11: Reinforced base materials, clad and unclad - Polyimide, brominated epoxide modified or unmodified, woven E-glass rein...
Organization: AENOR
Year: 2005
Status: Active
UNE 71201
Title:
INFORMATION TECHNOLOGY. TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS. 34-POLE DTE/DCE INTERFACE CONNECTOR MATEABILITY DIMENSIONS AND CONTACT NUMBER ASSIGNMENTS.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 60512-23-3
Title:
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 61347-2-11 CORR
Title:
Lamp controlgear -- Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 61049
Title:
CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS. PERFORMANCE REQUIREMENTS.
Organization: AENOR
Year: 1995
Status: Active
UNE 21136-22-1
Title:
ELECTRICAL RELAYS. ELECTRICAL DISTURBANCE TESTS FOR MEASURING RELAYS AND PROTECTION EQUIPMENT. 1 MHZ BURST DISTURBANCE TESTS.
Organization: AENOR
Year: 1992
Status: Inactive
UNE-EN 50065-4-7 CORR
Title:
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz -- Part 4-7: Portable low voltage decoupling filters - Safety requirements
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 60749-5
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 5: Steady-state temperature humidity bias life test
Organization: AENOR
Year: 2003
Status: Inactive
UNE 20620-5
Title:
METAL-CLAD BASE MATERIALS FOR PRINTED CIRCUITS. FLEXIBLE COPPER-CLAD POLYESTER (PETP) FILM
Organization: AENOR
Year: 1982
Status: Inactive
UNE 21136-14
Title:
ELECTRICAL RELAYS. PART 4: ENDURANCE TEST FOR ELECTRICAL RELAY CONTACTS. REFERRED VALUES FOR CONTACT LOADS.
Organization: AENOR
Year: 1990
Status: Inactive
UNE-EN 60061-2/A20
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY -- PART 2: LAMPHOLDERS
Organization: AENOR
Year: 2000
Status: Active
UNE-EN ISO 11810
Title:
Optics and optical instruments - Lasers and laser-related equipment - Test method for the laser-resistance of surgical drapes and/or patient-protective covers (ISO 11810:2002)
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 61076-7
Title:
Connectors for use in d.c., low-frequency analogue and digital high speed data applications -- Part 7: Cable outlet accessories with assessed quality, including qualification and capability approva...
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60357
Title:
Tungsten halogen lamps (non-vehicle) - Performance specifications
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60662/A9
Title:
HIGH-PRESSURE SODIUM VAPOUR LAMPS.
Organization: AENOR
Year: 1998
Status: Inactive
UNE-EN 60931-3
Title:
SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 KV. PART 3: INTERNAL FUSES.
Organization: AENOR
Year: 1997
Status: Active
UNE 20501-2-13
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST M: LOW AIR PRESSURE
Organization: AENOR
Year: 1986
Status: Inactive
UNE 20501-2-1
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 2: TESTS. TESTS A: COLD
Organization: AENOR
Year: 1978
Status: Inactive
UNE 20545-3-1
Title:
WIREWOUND FIXED RESISTORS TYPE 1. DETAIL SPECIFICATION
Organization: AENOR
Year: 1975
Status: Active
UNE-EN 60249-2-3/A4
Title:
Base materials for printed circuits -- Part 2: Specifications -- Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test).
Organization: AENOR
Year: 2001
Status: Active
UNE 20543-11
Title:
FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL CAPACITORS FOR DIRECT CURRENT. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
Organization: AENOR
Year: 1982
Status: Inactive
UNE 20031
Title:
A.C. MOTOR CAPACITORS
Organization: AENOR
Year: 1979
Status: Inactive
UNE 21136-22-2
Title:
ELECTRICAL RELAYS. ELECTRICAL DISTURBANCE TEST FOR MEASURING RELAYS AND PROTECTION EQUIPMENT. ELECTROSTATIC DISCHARGE TESTS
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60249-2-16/A3
Title:
Base materials for printed circuits -- Part 2: Specifications -- Specification No. 16: Polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).
Organization: AENOR
Year: 2001
Status: Active
UNE 20825-1
Title:
SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V. PART 1: GENERAL. PERFORMANCE, TESTING AND RATING. SAFETY REQUIREMENTS. GUIDE FOR INSTALLATION AND OPERTION.
Organization: AENOR
Year: 1993
Status: Inactive
UNE 20502-12
Title:
SOUND SYSTEM EQUIPMENT. PART 12: APPLICATION OF CONNECTORS FOR BROADCAST AND SIMILAR USE.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 61058-1 ERTA
Title:
Switches for appliances -- Part 1: General requirements
Organization: AENOR
Year: 2004
Status: Inactive
UNE 20510/1M
Title:
LIMITS AND METHODS OF MEASUREMENT OF RADIO INTERFERENCE CHARACTERISTICS OF FLUORESCENT LAMPS AND LUMINAIRES.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60255-1
Title:
Measuring relays and protection equipment -- Part 1: Common requirements
Organization: AENOR
Year: 2010
Status: Active
UNE-EN 60061-2/A40
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 62471
Title:
Photobiological safety of lamps and lamp system
Organization: AENOR
Year: 2009
Status: Active
UNE-EN 60901/A3 ERTA
Title:
Single-capped fluorescent lamps - Performance specifications
Organization: AENOR
Year: 2008
Status: Active
UNE-EN 60255-6
Title:
ELECTRICAL RELAYS. PART 6: MEASURING RELAYS AND PROTECTION EQUIPMENT.
Organization: AENOR
Year: 1996
Status: Inactive
UNE 20501-2-17
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 2: TESTS. TEST Q: SEALING.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60749-33
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 33: Accelerated moisture resistance - Unbiased autoclave
Organization: AENOR
Year: 2005
Status: Active
UNE-EN 60969
Title:
SELF-BALLASTED LAMPS FOR GENERAL LIGHTING SERVICES. PERFORMANCE REQUIREMENTS.
Organization: AENOR
Year: 1994
Status: Active
UNE 20548-1
Title:
DIMENSIONS OF CERAMIC DIELECTRIC CAPACITORS OF THE PLATE TYPE: SQUARE OR ROUND
Organization: AENOR
Year: 1975
Status: Active
UNE-EN 60512-12-7
Title:
Connectors for electronic equipment - Tests and measurements -- Part 12-7: Soldering tests - Test 12g: Solderability, wetting balance method.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 61050/A1
Title:
TRANSFORMERS FOR TUBULAR DISCHARGE LAMPS HAVING A NO-LOAD OUTPUT VOLTAGE EXCEEDING 1 000 V (GENERALLY CALLED NEON-TRANSFORMERS). GENERAL AND SAFETY REQUIREMETS.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 61249-2-13
Title:
Materials for printed boards and other interconnecting structures -- Part 2-13: Sectional specification set for reinforced base materials, clad and unclad - Cyanate ester non-woven aramid laminate ...
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60512-13-2 CORR
Title:
Connectors for electronic equipment - Tests and measurements -- Part 13-2: Mechanical operation tests - Test 13b: Insertion and withdrawal forces
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 60512-11-3
Title:
Connectors for electronic equipment - Tests and measurements -- Part 11-3: Climatic tests - Test 11c: Damp heat, steady state.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 175300
Title:
SECTIONAL SPECIFICATION: RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ.
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 60630/A6
Title:
Maximum lamp outlines for incandescent lamps
Organization: AENOR
Year: 2010
Status: Active
UNE-EN 61249-5-1
Title:
MATERIALS FOR INTERCONNECTION STRUCTURES. PART 5: SECTIONAL SPECIFICATION SET FOR CONDUCTIVE FOILS AND FILMS WITH AND WITHOUT COATINGS. SECTION 1: COPPER FOILS (FOR THE MANUFACTURE OF COPPER-CLAD B...
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 61965
Title:
Mechanical safety of cathode ray tubes.
Organization: AENOR
Year: 2002
Status: Inactive
UNE-EN 60669-2-3
Title:
Switches for household and similar fixed electrical installations -- Part 2-3: Particular requirements - Time delay switches (TDS) (IEC 60669-2-3:2006).
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 60061-1/A28
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 60118-12
Title:
HEARING AIDS. PART 12: DIMENSIONS OF ELECTRICAL CONNECTOR SYSTEMS.
Organization: AENOR
Year: 1997
Status: Active
UNE 20378-2-2
Title:
SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS. PARTICULAR REQUIREMENTS FOR ELECTROMAGNETIC REMOTE-CONTROL SWITCHES (R.C.S.)
Organization: AENOR
Year: 1990
Status: Inactive
UNE-EN 60512-13-1
Title:
Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces (IEC 60512-13-1:2006)
Organization: AENOR
Year: 2006
Status: Active
UNE 21302-541
Title:
ELECTROTECHNICAL VOCABULARY. PRINTED CIRCUITS.
Organization: AENOR
Year: 1992
Status: Active
UNE 20502-11/1M
Title:
Sound system equipment - Part 11: Application of connectors for the interconnection of sound system components
Organization: AENOR
Year: 1996
Status: Inactive
UNE 21302-815
Title:
International Electrotechnical Vocabulary (IEV) - Part 815: Superconductivity
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60749-12
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 12: Vibration, variable frequency
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60898/A11
Title:
CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTON FOR HOUSEHOLD AND SIMILAR INSTALLATIONS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60061-2/A18
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 2: LAMPHOLDERS
Organization: AENOR
Year: 1999
Status: Active
UNE 20543-14
Title:
FIXED CAPACITORS FOR RADIO INTERFERENCE SUPPRESSION. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
Organization: AENOR
Year: 1985
Status: Inactive
UNE 20629-0
Title:
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ. GUIDE TO DRAWING INFORMATION IN DETAIL SPECIFICATIONS
Organization: AENOR
Year: 1981
Status: Active
UNE-EN 61984
Title:
Connectors - Safety requirements and tests.
Organization: AENOR
Year: 2002
Status: Inactive
UNE-EN 61008-2-1
Title:
RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 2-1: APPLICABILITY OF THE GENERAL RULES TO RCCB'S FUNCTIONALLY INDEP...
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60061-4/A10
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 4: Guidelines and general information (IEC 60061-4:1990/A10:2006).
Organization: AENOR
Year: 2007
Status: Active
UNE 20501-2-48
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. GUIDANCE ON THE TESTS OF IEC PUBLICATION 68 (STORAGE)
Organization: AENOR
Year: 1985
Status: Inactive
UNE 20546-4
Title:
SINGLE-TURN ROTARY POWER POTENTIOMETERS. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
Organization: AENOR
Year: 1981
Status: Active
UNE-EN 60297-5-107
Title:
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-107: Subracks and associated plug-in units - Rear mounted plug-in units.
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60898/A1 ERTA
Title:
CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS.
Organization: AENOR
Year: 1993
Status: Inactive
UNE 20700-11
Title:
SEMICONDUCTOR DEVICES. PART 11: SECTIONAL SPECIFICATION FOR DISCRETE DEVICES.
Organization: AENOR
Year: 1991
Status: Active
UNE 20620-2-4
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 4: EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET, GENERAL PURPOSE GRADE.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60249-2-7/A3
Title:
BASE MATERIAL FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 7: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60749-18
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 18: Ionizing radiation (total dose)
Organization: AENOR
Year: 2003
Status: Inactive
UNE 20546-1
Title:
POTENTIOMETERS. TERMS AND METHODS OF TEST
Organization: AENOR
Year: 1976
Status: Inactive
UNE-EN 60749-25
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 25: Temperature cycling
Organization: AENOR
Year: 2004
Status: Active
UNE 20549
Title:
MAXIMUM CASE DIMENSIONS FOR CAPACITORS AND RESISTORS
Organization: AENOR
Year: 1975
Status: Active
UNE-EN 60062 CORR
Title:
Marking codes for resistors and capacitors
Organization: AENOR
Year: 2007
Status: Inactive
UNE-EN 60061-1/A22
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 1:LAMP CAPS
Organization: AENOR
Year: 2000
Status: Active
UNE-EN ISO 11254-2
Title:
Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001)
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 50294/A1
Title:
Measurement method of total input power of ballast-lamp circuits.
Organization: AENOR
Year: 2002
Status: Inactive
UNE 20558
Title:
ALUMINIUM ELECTROLYTIC CAPACITORS FOR LONG LIFE (TYPE 1) AND FOR GENERAL PURPOSE APPLICATION (TYPE 2)
Organization: AENOR
Year: 1976
Status: Active
UNE-EN 60920
Title:
BALLATS FOR TUBULAR FLUORESCENT LAMPS. GENERAL AND SAFETY REQUIREMENTS.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-IEC 60050-581
Title:
International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
Organization: AENOR
Year: 2009
Status: Active
UNE-EN 60917-1/A1
Title:
Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard
Organization: AENOR
Year: 2002
Status: Inactive
UNE 20057-9
Title:
FOUR PIN CAP AND LAMPHOLDER FOR ROUND FLUORESCENT LAMPS G10 Q.
Organization: AENOR
Year: 1978
Status: Inactive
UNE-EN 60061-1/A43
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 61643-331
Title:
Components for low-voltage surge protective devices - Part 331: Specification for metal oxide varistors (MOV)
Organization: AENOR
Year: 2004
Status: Inactive
UNE-EN 60249-2-12
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 12: THIN EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY, FOR USE IN THE FABRICATION OF ...
Organization: AENOR
Year: 1996
Status: Active
UNE 21136-19
Title:
SECTIONAL SPECIFICATION. ELECTROMECHANICAL ALL-OR-NOTHING RELAYS OF ASSESSED QUALITY.
Organization: AENOR
Year: 1992
Status: Active
UNE-EN 61549/A2
Title:
Miscellaneous lamps
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 61788-1
Title:
SUPERCONDUCTIVITY. PART 1: CRITICAL CURRENT MEASUREMENT. DC CRITICAL CURRENT OF CU/NB-TI COMPOSITE SUPERCONDUCTORS.
Organization: AENOR
Year: 1999
Status: Inactive
UNE-EN 60512-6-3
Title:
Connectors for electronic equipment - Tests and measurements -- Part 6-3: Dynamic stress tests - Test 6c: Shock.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 60512-1-1
Title:
Connectors for electronic equipment - Tests and measurements - Part 1-1: General examination - Test 1a: Visual examination.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 60064/A2
Title:
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements.
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 60061-1/A34
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2006
Status: Active
UNE 71038 EX
Title:
INFORMATION SYSTEMS INTERCONNECTION, LOCAL AREA NETWORKS, PROVISION OF THE OSI. CONNECTION-MODE TRANSPORT SERVICE USING CONNECTIONLESS-MODE NETWORK SERVICE ON A CSMA/CD SINGLE LAN
Organization: AENOR
Year: 1990
Status: Active
UNE 20545-6
Title:
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT. SECTIONAL SPECIFICATION. FIXED RESISTOR NETWORKS WITH INDIVIDUALLY MEASURABLE RESISTORS
Organization: AENOR
Year: 1989
Status: Active
UNE-EN 61969-2-2
Title:
Mechanical structures for electronic equipment - Outdoor enclosures. Part 2-2: Detail specification - Dimension for cases.
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60249-2-14/A5
Title:
Base materials for printed circuits -- Part 2: Specifications -- Specification No. 14: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic...
Organization: AENOR
Year: 2001
Status: Active
UNE 20699
Title:
SEMICONDUCTOR DEVICES. MECHANICAL AND CLIMATIC TEST METHODS.
Organization: AENOR
Year: 1992
Status: Inactive
UNE-EN 60512-11-7
Title:
Connectors for electronic equipment - Tests and measurements -- Part 11- 7: Climatic tests - Test 11g: Flowing mixed gas corrosion test
Organization: AENOR
Year: 2004
Status: Active
UNE 20533
Title:
MEASUREMENT OF THE DIMENSIONS OF A CYLINDRICAL COMPONENT HAVING TOP AXIAL TERMINATIONS
Organization: AENOR
Year: 1974
Status: Active
UNE-EN 60738-1/A1
Title:
Thermistors - Directly heated positive temperature coefficient -- Part 1: Generic specification
Organization: AENOR
Year: 2010
Status: Active
UNE-EN 60682
Title:
STANDARD METHOD OF MEASURING THE PINCH TEMPERATURE OF QUARTZ-TUNGSTEN-HALOGEN LAMPS.
Organization: AENOR
Year: 1996
Status: Active
UNE 20501-2-44
Title:
ELECTRONIC COMPONENTS AND ELECTRONIC EQUIPMENT. BASIC ENVIRONMENTAL TESTING PROCEDURES. GUIDE ON TEST T: SOLDERING
Organization: AENOR
Year: 1981
Status: Inactive
UNE-EN 60061-3/A39
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges
Organization: AENOR
Year: 2010
Status: Active
UNE 20501-2-40
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 2: TESTS. TEST Z/AM: COMBINED COLD/LOW AIR PRESSURE TESTS
Organization: AENOR
Year: 1980
Status: Inactive
UNE 20543-4
Title:
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID OR NON-SOLID ELECTROLYTE. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENT
Organization: AENOR
Year: 1979
Status: Inactive
UNE 20548-2
Title:
DIMENSIONS OF CERAMIC DIELECTRIC CAPACITORS OF THE PLATE TYPE: RECTANGULAR (EXCEPT SQUARE)
Organization: AENOR
Year: 1975
Status: Active
UNE-EN ISO 11254-3
Title:
Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 3: Assurance of laser power (energy) handling capabilities (ISO 11254-3:2006)
Organization: AENOR
Year: 2007
Status: Inactive
UNE 20543-16-1
Title:
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS. ASSESSMENT LEVEL E
Organization: AENOR
Year: 1985
Status: Inactive
UNE 20504
Title:
Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
Organization: AENOR
Year: 1984
Status: Inactive
UNE 20353-2-4
Title:
SWITCHES FOR APPLIANCES. PARTICULAR SPECIFICATIONS FOR 500 V SWITCHES HAVING AND ADDITIONAL 600 V MARKING.
Organization: AENOR
Year: 1989
Status: Inactive
UNE-EN 60249-2-12/A2
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 12: THIN EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY, FOR USE IN THE FABRICATION OF ...
Organization: AENOR
Year: 1996
Status: Inactive
UNE 20606-5/2C
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. TEST 10C: SWITCHING CAPACITIVE LOADS
Organization: AENOR
Year: 1983
Status: Inactive
UNE-EN 61249-2-4
Title:
Materials for printed boards and other interconnecting structures -- Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammabil...
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 60249-2-10/A5
Title:
Base materials for printed circuits -- Part 2: Specifications -- Specification No. 10: Epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning...
Organization: AENOR
Year: 2001
Status: Active
UNE 20501-3-2
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 3: BACKGROUND INFORMATION. SECTION TWO. COMBINED TEMPERATURE/LOW AIR PRESSURE TESTS
Organization: AENOR
Year: 1979
Status: Inactive
UNE-EN ISO 14880-1
Title:
Optics and photonics. Microlens array - Part 1: Vocabulary (ISO 14880-1:2001, including Corrigendum 1:2004)
Organization: AENOR
Year: 2006
Status: Inactive
UNE-EN 60286-1
Title:
Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes
Organization: AENOR
Year: 1999
Status: Inactive
UNE-EN 60512-23-4
Title:
Connectors for electronic equipment - Test and measurement -- Part 23-4: Screening and filtering tests - Test 23d: Transmission line reflections in the time domain.
Organization: AENOR
Year: 2002
Status: Active
UNE 21136-22-3
Title:
ELECTRICAL RELAYS. ELECTRICAL DISTURBANCE TESTS FOR MEASURING RELAYS AN PROTECTION EQUIPMENT. RADIATED ELECTROMAGNETIC FIELD DISTURBANCE TESTS.
Organization: AENOR
Year: 1993
Status: Inactive
UNE 20545-4
Title:
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT. PART 4: SECTIONAL SPECIFICATION: FIXED POWER RESISTORS
Organization: AENOR
Year: 1985
Status: Active
UNE-EN 61347-2-6 CORR
Title:
Lamp controlgear -- Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 61047
Title:
DC or AC supplied electronic step-down convertors for filament lamps - Performance requirements
Organization: AENOR
Year: 2005
Status: Active
UNE 20501-3-1/1C
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. BACKGROUND INFORMATION. COLD AND DRY HEAT TESTS
Organization: AENOR
Year: 1980
Status: Inactive
UNE-EN 60249-2-17/A1
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 17: THIN POLYIMIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY FOR USE IN THE FABRICATION OF...
Organization: AENOR
Year: 1997
Status: Inactive
UNE-EN 61347-2-1/A1
Title:
Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other than glow starters) (IEC 61347-2-1:2000/A1:2005).
Organization: AENOR
Year: 2006
Status: Active
UNE-EN 60749-23
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 23: High temperature operating life
Organization: AENOR
Year: 2005
Status: Active
UNE 20606-9/1C
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRIC EQUIPMENT, BASIC TESTING PROCEDURES AND MEASURING METHODS. TEST 19A: FLUID RESISTANCE OF PRE-INSULATED CRIMP BARRELS
Organization: AENOR
Year: 1985
Status: Inactive
UNE-EN 60061-1/A25
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps.
Organization: AENOR
Year: 2001
Status: Active
UNE 20535/1C
Title:
Dimensions of spindle ends for manually operated electronic components
Organization: AENOR
Year: 1977
Status: Inactive
UNE-EN 50107-2
Title:
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV -- Part 2: Requirements for earth-leakage and open-circuit prote...
Organization: AENOR
Year: 2006
Status: Active
UNE-EN 60249-2-11/A2
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 11: THIN EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET, GENERAL PURPOSE GRADE, FOR USE IN THE FABRICATION OF M...
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 61347-2-10 CORR
Title:
Lamp controlgear -- Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 60297-5-102
Title:
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-102: Subracks and associated plug-in units - Electromagnetic shielding ...
Organization: AENOR
Year: 2001
Status: Inactive
UNE 20606-7
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. MECHANICAL OPERATING TESTS AND SEALING TESTS
Organization: AENOR
Year: 1981
Status: Inactive
UNE-EN 60061-3/A29
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60191-6-8
Title:
Mechanical standardization of semiconductor devices -- Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass seal...
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 61788-4
Title:
Superconductivity -- Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors.
Organization: AENOR
Year: 2002
Status: Inactive
UNE 21136-6
Title:
ELECTRICAL RELAYS. PART 6: MEASURING RELAYS AND PROTECTION EQUIPMENT.
Organization: AENOR
Year: 1994
Status: Inactive
UNE 20532
Title:
NOMINAL DIAMETERS FOR RESISTANCE AND CONDENSER WIRES.
Organization: AENOR
Year: 1973
Status: Inactive
UNE-EN 60252
Title:
A.C. MOTOR CAPACITORS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60738-1
Title:
Thermistors - Directly heated positive temperature coefficient -- Part 1: Generic specification (IEC 60738-1:2006)
Organization: AENOR
Year: 2006
Status: Active
UNE-EN 60512-11-6
Title:
Connectors for electronic equipment - Tests and measurements -- Part 11-6: Climatic tests - Test 11f: Corrosion, salt mist.
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 61249-2-21
Title:
Materials for printed boards and other interconnecting structures -- Part 2-21: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass reinforced laminated sheets of def...
Organization: AENOR
Year: 2005
Status: Active
UNE-EN 60286-5
Title:
Packaging of components for automatic handling - Part 5: Matrix trays
Organization: AENOR
Year: 2005
Status: Inactive
UNE 20353-2-3
Title:
SWITCHES FOR APPLIANCES. PARTICULAR SPECIFICATIONS FOR PROGRAMME CONTROLLERS
Organization: AENOR
Year: 1989
Status: Inactive
UNE 20356-2-1
Title:
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES. PART 2-1: SEWING MACHINE COUPLERS
Organization: AENOR
Year: 1989
Status: Inactive
UNE-EN 62326-4
Title:
PRINTED BOARDS. PART 4: RIGID MULTILAYER PRINTED BOARDS WITH INTERLAYER CONNECTIONS. SECTIONAL SPECIFICATION.
Organization: AENOR
Year: 1999
Status: Active
UNE 20383
Title:
CURRENT-OPERATED EARTH-LEAKAGE CIRCUIT-BREAKERS FOR DOMESTIC AND SIMILAR GENERAL PURPOSES
Organization: AENOR
Year: 1975
Status: Inactive
UNE-EN 60917
Title:
MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60249-2-1
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 1: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET, HIGH ELECTRICAL QUALITY.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60603-3
Title:
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 3:TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING CONTACTS SPACED AT 2,54 MM (0,100 IN) CENTRES AND STAGGERED TERMINATIONS AT ...
Organization: AENOR
Year: 1999
Status: Active
UNE-EN 60512-12-4
Title:
Connectors for electronic equipment - Tests and measurements -- Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, solder bath method (IEC 60512-12-4:2006).
Organization: AENOR
Year: 2006
Status: Active
UNE-EN 60249-2-19/A1
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 19: THIN BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY ...
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 60249-2-9/A4
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 9: EPOXIDE CELLULOSE PAPER CORE, EPOXIDE GLASS CLOTH SURFACES COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERT...
Organization: AENOR
Year: 1996
Status: Inactive
UNE 133001-2/1M
Title:
ATTACHMENTS TO PUBLIC SWITCHED TELEPHONE NETWORK (PSTN). GENERAL TECHNICAL REQUIREMENTS FOR EQUIPMENT CONNECTED TO AND ANALOGUE SUBSCRIBER INTERFACE IN THE PSTN. PART 2: ATTACHMENT REQUIREMENTS TO ...
Organization: AENOR
Year: 1998
Status: Active
UNE-EN ISO 14881
Title:
Integrated optics - Interfaces - Parameters relevant to coupling properties (ISO 14881:2001)
Organization: AENOR
Year: 2007
Status: Inactive
UNE 20191-4
Title:
MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES. PART 4: CODING SYSTEM AND CLASSIFICATION INTO FORMS OF PACKAGE OUTLINES FOR SEMICONDUCTOR DEVICES.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 60898/A13
Title:
CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 61988-2-1
Title:
Plasma display panels -- Part 2-1: Measuring methods -- Optical.
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 61788-2
Title:
Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors
Organization: AENOR
Year: 2000
Status: Inactive
UNE 20620-2-1
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATIION. NO. 1: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET, HIGH ELECTRICAL QUALITY.
Organization: AENOR
Year: 1993
Status: Inactive
UNE 20317 ERTA
Title:
Miniature circuit-breakers for power control, of 1,5 A to 63 A,
Organization: AENOR
Year: 2005
Status: Active
UNE 20512-3
Title:
MATHEMATICAL EXPRESSION TO THE TERMS AND DEFINITIONS FOR RELIABILITY. SYMBOLS
Organization: AENOR
Year: 1978
Status: Inactive
UNE-EN 60749-19
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 19: Die shear strength
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 60926
Title:
AUXILIARIES FOR LAMPS. STARTING DEVICES (OTHER THAN GLOW STARTERS). GENERAL AND SAFETY REQUIREMENTS.
Organization: AENOR
Year: 1998
Status: Inactive
UNE-EN 60027-2
Title:
Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics
Organization: AENOR
Year: 2009
Status: Inactive
UNE-EN 60749-13
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 13: Salt atmosphere
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60825-4/A1
Title:
Safety of laser products -- Part 4: Laser guards
Organization: AENOR
Year: 2010
Status: Active
UNE-EN 60512-14-5
Title:
Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
Organization: AENOR
Year: 2007
Status: Active
UNE 20057-2
Title:
ONE PIN CAPS FA4, FA6, FA8, LAMPSHOLDER AND GANGES FOR TUBULAR FLUORESCENT LAMPS.
Organization: AENOR
Year: 1977
Status: Inactive
UNE-EN 60297-5-101
Title:
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 5-101: Subracks and associated plug-in units - Injector/extractor handle.
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 61076-4
Title:
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: SECTIONAL SPECIFICATIONS. PRINTED BOARD CONNECTORS.
Organization: AENOR
Year: 1997
Status: Active
UNE 20606-6
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CLIMATIC TESTS AND SOLDERING TESTS
Organization: AENOR
Year: 1986
Status: Active
UNE-EN 61076-3-101
Title:
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 3: RECTANGULAR CONNECTORS. SECTION 101: DETAIL SPECIFICATION FOR A RANGE O...
Organization: AENOR
Year: 1999
Status: Active
UNE-EN 60921/A1
Title:
Ballasts for tubular fluorescent lamps - Performance requirements (IEC 60921:2004/A1:2006).
Organization: AENOR
Year: 2006
Status: Active
UNE-EN 60512-6-4
Title:
Connectors for electronic equipment - Tests and measurements -- Part 6-4: Dynamic stress tests - Test 6d: Vibration (sinusoidal).
Organization: AENOR
Year: 2002
Status: Active
UNE 20501-2-50
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. TESTS Z/AFC: COMBINED COLD/VIBRATION (SINUSOIDAL) TESTS FOR BOTH HEAT-DISSIPATING AND NON-HEAT-DISSIPATING SPECIMENS
Organization: AENOR
Year: 1986
Status: Inactive
UNE-EN 60191-6-2
Title:
Mechanical standardization of semiconductor devices -- Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1...
Organization: AENOR
Year: 2003
Status: Active
UNE 21302-445
Title:
International Electrotechnical Vocabulary (IEV) - Part 445: Specified time all-or-nothing relays
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60249-2-10/A4
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 10: EPOXIDE NON-WOVEN/WOVEN GLASS REINFORCED COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60249-2-9
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 9: EPOXIDE CELLULOSE PAPER CORE, EPOXIDE GLASS CLOTH SURFACE COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTI...
Organization: AENOR
Year: 1996
Status: Active
UNE 21359
Title:
LABORATORY D.C. RESISTORS.
Organization: AENOR
Year: 1976
Status: Inactive
UNE-EN 60249-2-16
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 16: POLYIMIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 60061-2
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHAngeability and safety. Part 2: Lampholders.
Organization: AENOR
Year: 1996
Status: Active
UNE 20543-1
Title:
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. GENERIC SPECIFICATION
Organization: AENOR
Year: 1985
Status: Inactive
UNE-EN 50107-1/A1
Title:
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV -- Part 1: General requirements
Organization: AENOR
Year: 2004
Status: Active
UNE 20606-5/1C
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. IMPACT TESTS (FREE COMPONENTS), STATIC LOAD TESTS (FIXED COMPONENTS) ENDURANCE TESTS AND OVERO...
Organization: AENOR
Year: 1982
Status: Inactive
UNE 21136-13
Title:
ELECTRICAL RELAYS. BIASED (PERCENTAGE) DIFFERENTIAL RELAYS.
Organization: AENOR
Year: 1990
Status: Active
UNE-EN 60432-1
Title:
Incandescent lamps - Safety specifications -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes.
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60061-2/A35
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders (IEC 60061-2:1969/A35:2006).
Organization: AENOR
Year: 2007
Status: Active
EA 0005
Title:
Technical specification of supply assembly for high intensity discharge lamps of double power level.
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60249-2-11/A4
Title:
Base materials for printed circuits -- Part 2: Specifications -- Specification No. 11: Thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication...
Organization: AENOR
Year: 2001
Status: Active
UNE 20620-2
Title:
METAL-CLAD BASE MATERIALS FOR PRINTED CIRCUITS. GENERAL SPECIFICATIONS
Organization: AENOR
Year: 1980
Status: Inactive
UNE-EN 60061-3/A30
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60061-1/A30
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2003
Status: Active
UNE 71204
Title:
INFORMATION TECHNOLOGY. TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS. 26-POLE INTERFACE CONNECTOR MATEABILITY DIMENSIONS AND CONTACT NUMBER ASIGNMENTS.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 60252-1
Title:
AC motor capacitors -- Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 60249-2-12/A3
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 12: THIN EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY, FOR USE IN THE FABRICATION OF ...
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60061-1/A41
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2010
Status: Active
UNE-EN 60061-1/A33
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 61076-4-100
Title:
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications. Part 4: Printed board connectors. Section 100: Detail specification for two-pa...
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60249-2-18
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICTION Nº 18: BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTI...
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 60603-9
Title:
Connectors for frequencies below 3 MHz for use with printed boards - Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60838-2-2
Title:
Miscellaneous lampholders -- Part 2-2: Particular requirements - Connectors for LED-modules (IEC 60838-2-2:2006).
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 50107
Title:
SIGNS AND LUMINOUS-DISCHARGE-TUBE INSTALLATIONS OPERATING FROM A NO-LOAD RATED OUTPUT VOLTAGE EXCEEDING 1 KV BUT NOT EXCEEDING 10 KV.
Organization: AENOR
Year: 1999
Status: Inactive
UNE 20620-2-15
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 15: FLEXIBLE COPPER-CLAD POLYIMIDE FILM, OF DEFINED FLAMMABILITY.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 61988-1
Title:
Plasma display panels -- Part 1: Terminology and letter symbols
Organization: AENOR
Year: 2005
Status: Inactive
UNE 20676
Title:
METHOD FOR THE DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS
Organization: AENOR
Year: 1985
Status: Active
UNE-EN 60749-30
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
Organization: AENOR
Year: 2005
Status: Inactive
UNE-EN 61347-2-3/A2
Title:
Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps (IEC 61347-2-3:2000/A2:2006).
Organization: AENOR
Year: 2006
Status: Inactive
UNE-EN 60191-6-1
Title:
Mechanical standardization of semiconductor devices -- Part 6-1: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for gull-wing ...
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 60825-4
Title:
Safety of laser products -- Part 4: Laser guards (IEC 60825-4:2006).
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 60512-1-2
Title:
Connectors for electronic equipment - Tests and measurements -- Part 1-2: General examination - Test 1b: Examination of dimension and mass.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 61076-4-111
Title:
Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes havin...
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60255-21-1
Title:
ELECTRICAL RELAYS. PART 21: VIBRATION, SHOCK, BUMP AND SEISMIC TESTS ON MEASURING RELAYS AND PROTECTION EQUIPMENT. SECTION 1: VIBRATION TESTS (SINUSOIDAL).
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60400
Title:
Lampholders for tubular fluorescent lamps and starterholders
Organization: AENOR
Year: 2011
Status: Inactive
UNE-EN 60357/A1
Title:
Tungsten halogen lamps (non-vehicle) - Performance specifications
Organization: AENOR
Year: 2008
Status: Active
UNE 20501-2-6
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST FC AND GUIDANCE: VIBRATION (SINUSOIDAL)
Organization: AENOR
Year: 1985
Status: Inactive
UNE-EN 60061-3/A28
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 61969-2
Title:
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 2: Sectional specification - Coordination dimensions for cases and cabinets.
Organization: AENOR
Year: 2000
Status: Inactive
UNE-EN 60512-12-1
Title:
Connectors for electronic equipment - Tests and measurements -- Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method (IEC 60512-12-1:2006).
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 61249-2-9
Title:
Materials for printed boards and other interconnecting structures -- Part 2-9: Reinforced base materials clad and unclad - Bismaleimide/triazine, modified epoxide or unmodified, woven E-glass reinf...
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60061-1/A44
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2011
Status: Active
UNE 20629-2
Title:
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ (MC/S). CONNECTORS FOR RADIO RECEIVERS AND ASSOCIATED SOUND EQUIPMENT
Organization: AENOR
Year: 1981
Status: Active
UNE-EN 60061-4/A9
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 4: Guidelines and general information
Organization: AENOR
Year: 2005
Status: Active
UNE-EN 61107
Title:
DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL. DIRECT LOCAL DATA EXCHANGE.
Organization: AENOR
Year: 1998
Status: Inactive
UNE-EN 60061-3/A37
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges (IEC 60061-3:1969/A37:2006).
Organization: AENOR
Year: 2007
Status: Active
UNE-EN ISO 11551
Title:
Optics and optical instruments - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2003)
Organization: AENOR
Year: 2004
Status: Inactive
UNE-EN 60249-2-1/A2
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICAION Nº1: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET, HIGH ELECTRICAL QUALITY.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 61347-2-1 CORR
Title:
Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other than glow starters)
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 60061-3/A23
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges.
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 61347-2-9/A1
Title:
Lamp controlgear -- Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps)
Organization: AENOR
Year: 2004
Status: Inactive
UNE 20501-2-6/1C
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST FC AND GUIDANCE: VIBRATION (SINUSOIDAL)
Organization: AENOR
Year: 1986
Status: Inactive
UNE-EN 60512-13-5 CORR
Title:
Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method
Organization: AENOR
Year: 2007
Status: Active
UNE 21136-1
Title:
ALL-OR-NOTHING ELECTRICAL RELAYS
Organization: AENOR
Year: 1990
Status: Inactive
UNE-EN 60249-2-2/A3
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 2: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET, ECONOMIC QUALITY.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60110-1
Title:
POWER CAPACITORS FOR INDUCTION HEATING INSTALLATIONS. PART 1: GENERAL
Organization: AENOR
Year: 1999
Status: Active
UNE-EN 62031
Title:
LED modules for general lighting - Safety specifications
Organization: AENOR
Year: 2009
Status: Inactive
UNE-EN 60512-9-3 CORR
Title:
Connectors for electronic equipment - Tests and measurements -- Part 9-3: Endurance tests - Test 9c: Mechanical operation (engaging/separating) with electrical load
Organization: AENOR
Year: 2007
Status: Inactive
UNE 20822
Title:
IEC 822 VSB. PARALLEL SUB-SYSTEM BUS OF THE IEC 821 VMEBUS.
Organization: AENOR
Year: 1993
Status: Active
UNE-EN 60061-2/A36
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders (IEC 60061-2:1969/A36:2007).
Organization: AENOR
Year: 2007
Status: Active
UNE 20606-7/1C
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. MECHANICAL OPERATING TESTS AND SEALING TESTS
Organization: AENOR
Year: 1986
Status: Inactive
UNE 20501-2-33
Title:
ELECTRONIC COMPONENTS AND EQUIPMENT. BASIC ENVIRONMENTAL TESTING PROCEDURES: GUIDANCE ON CHANGE OF TEMPERATURE TESTS
Organization: AENOR
Year: 1980
Status: Inactive
UNE 20543-15/1M
Title:
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE.
Organization: AENOR
Year: 1995
Status: Active
UNE-EN 60061-3/A33
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges (IEC 60061-3:1969/A33:2004)
Organization: AENOR
Year: 2006
Status: Active
UNE-EN ISO 11254-1
Title:
Lasers and laser-related equipment - Determination of laser-induced damaged threshold of optical surfaces - Part 1: 1 on 1 test. (ISO 11254-1:2000)
Organization: AENOR
Year: 2001
Status: Inactive
UNE 20902
Title:
TERMS AND DEFINITIONS FOR PRINTED CIRCUITS.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 61058-2-1
Title:
Switches for appliances -- Part 2-1: Particular requirements for cord switches
Organization: AENOR
Year: 2011
Status: Inactive
UNE-EN 60749-17
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 17: Neutron irradiation
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60061-3/A22
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PARTE 3: GAUGES.
Organization: AENOR
Year: 2000
Status: Active
UNE-EN 60825
Title:
RADIATION SAFETY OF LASER PRODUCTS, EQUIPMENT CLASSIFICATION REQUIREMENTS AND USER'S GUIDE.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60512-15-8
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 15: MECHANICAL TESTS ON CONTACTS AND TERMINATIONS. SECTION 8: TEST 15H. CONTACT RETENTION...
Organization: AENOR
Year: 1997
Status: Active
UNE 20825-2/1M
Title:
SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1 000 V. PART 2: ENDURANCE TESTING.
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 60249-2-7
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 7: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60061-3/A31
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 61643-321
Title:
Components for low-voltage surge protective devices -- Part 321: Specifications for Avalanche Breakdown Diode (ABD).
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 61347-2-4
Title:
Lamp controlgear -- Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting.
Organization: AENOR
Year: 2002
Status: Inactive
UNE-EN 60061-1/A31
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60749-15
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices
Organization: AENOR
Year: 2011
Status: Inactive
UNE 20539-1
Title:
DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES. PART 1: PANELS AND RACKS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE 20545-5
Title:
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT. PART 5: SECTIONAL SPECIFICATION: FIXED PRECISION RESISTORS
Organization: AENOR
Year: 1985
Status: Inactive
UNE 20606-8
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT; BASIC TESTING PROCEDURES AND MEASURING METHODS. CONNECTOR TESTS (MECHANICAL) AND MECHANICAL TESTS ON CONTACTS AND TERMINATIONS
Organization: AENOR
Year: 1981
Status: Active
UNE-EN 60926/A1
Title:
Auxiliaries for lamps - Starting devices (other than glow starters) - General and safety requirements
Organization: AENOR
Year: 2000
Status: Inactive
UNE 20825-2
Title:
SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 660 V. PART 2: ENDURANCE TESTING.
Organization: AENOR
Year: 1993
Status: Active
UNE 20057-3
Title:
BAYONET CAPS AND LAMPHOLDER B 15 AND B 22 AND VERIFICATION GANGES.
Organization: AENOR
Year: 1975
Status: Inactive
UNE 20545-4-1
Title:
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT. PART 4: BLANK DETAIL SPECIFICATION: FIXED POWER RESISTORS. ASSESSMENT LEVEL E
Organization: AENOR
Year: 1985
Status: Active
UNE-EN 60249-2-16/A2
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 16: POLYMIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1997
Status: Inactive
UNE 26164-3
Title:
LAMPS FOR ROAD VEHICLES. FUNCTIONAL CHARACTERISTICS AND VERIFICATION TESTS.
Organization: AENOR
Year: 1990
Status: Inactive
UNE 20620-2/1C
Title:
METAL-CLAD BASE MATERIALS FOR PRINTED CIRCUITS. GENERAL SPECIFICATIONS
Organization: AENOR
Year: 1984
Status: Inactive
UNE 20501-2-54
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 2: TEST. TEST TA: SOLDERING. SOLDERABILITY TESTING BY THE WETTING BALANCE METHOD.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 60825-12
Title:
Safety of laser products - Part 12: Safety of free space optical communication systems used for transmission of information
Organization: AENOR
Year: 2005
Status: Inactive
UNE-EN 60749-3
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 3: External visual examination
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 61360-1
Title:
Standard data element types with associated classification scheme for electric components -- Part 1: Definitions - Principles and methods
Organization: AENOR
Year: 2005
Status: Inactive
UNE-EN 60061-3/A25
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges
Organization: AENOR
Year: 2003
Status: Active
UNE 20057-1
Title:
CAPS AND LAMPS HOLDER FOR GENERAL SERVICE LAMPS. TYPES.
Organization: AENOR
Year: 1972
Status: Inactive
UNE-EN 60249-2-18/A1
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICTION Nº 18: BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTI...
Organization: AENOR
Year: 1997
Status: Inactive
UNE-EN 60512-11-10
Title:
Connectors for electronic equipment - Tests and measurements -- Part 11-10: Climatic tests - Test 11j: Cold.
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 61086-1
Title:
Coatings for loaded printed wire boards (conformal coatings) -- Part 1: Definitions, classification and general requirements
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60603-4
Title:
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 4: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING CONTACT SPACED AT1,91 MM (0,075 IN) CENTRES AND STAGGED TERMINATIONS AT TH...
Organization: AENOR
Year: 1999
Status: Active
UNE-EN 60061-2/A37
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders
Organization: AENOR
Year: 2010
Status: Active
UNE 21136-18
Title:
DIMENSIONS FOR GENERAL PURPOSE ALL-OR-NOTHING RELAYS.
Organization: AENOR
Year: 1989
Status: Active
UNE-EN 60061-1/A40
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 1: Lamp caps
Organization: AENOR
Year: 2010
Status: Active
UNE 207007 IN
Title:
High-voltage switchgear and controlgear - The use of electronic and associated technologies in auxiliary equipment of switchgear and controlgear
Organization: AENOR
Year: 2000
Status: Active
UNE-EN 60286-6
Title:
Packaging of components for automatic handling -- Part 6: Bulk case packaging for surface mounting components
Organization: AENOR
Year: 2005
Status: Active
UNE-EN 61249-2-12
Title:
Materials for printed boards and other interconnecting structures -- Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of def...
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60512-2-5
Title:
Connectors for electronic equipment - Tests and measurements -- Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
Organization: AENOR
Year: 2004
Status: Active
UNE 20545-6-1
Title:
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT. BLANK DETAIL SPECIFICATION. FIXED RESISTOR NETWORKS WITH INDIVIDUALLY MEASURABLE RESISTORS, ALL OF EQUAL VALUE AND EQUAL DISSIPATION. ASSESSMENT LEV...
Organization: AENOR
Year: 1989
Status: Active
UNE-EN 60512-25-3
Title:
Connectors for electronic equipment - Tests and measurement -- Part 25-3: Test 25c - Rise time degradation.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 61008-2-1/A11
Title:
RESIDUAL CURRENT OPERATED CIRCUIT-BRAKERS WITHOUT INTEGRAL OVERCURRENTPROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S). PART 2-1: APPLICABILITY OF THE GENERAL RULES TO RCCB'S FUNCTIONALLY INDEPEN...
Organization: AENOR
Year: 1999
Status: Active
UNE-EN 60749-4
Title:
Semiconductor devices - Mechanical and climatic test methods - Part 4: Damp heat, steady state, highly accelerated stress test (HAST)
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60061-1/A6
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 1: LAMP CAPS.
Organization: AENOR
Year: 1998
Status: Active
UNE 21359-2
Title:
LABORATORY RESISTORS. PART 2: LABORATORY A.C. RESISTORS.
Organization: AENOR
Year: 1997
Status: Inactive
UNE-EN 60061-3/A35
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges (IEC 60061-3:1969/A35:2005).
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 61347-2-10/A1
Title:
Lamp controlgear -- Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
Organization: AENOR
Year: 2009
Status: Active
UNE-EN 61347-2-5
Title:
Lamp controlgear -- Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting.
Organization: AENOR
Year: 2002
Status: Inactive
UNE-EN 60512-5-1
Title:
Connectors for electronic equipment - Tests and measurements -- Part 5-1: Current-carrying capacity tests - Test 5a: Temperature rise.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 60512-11-2
Title:
Connectors for electronic equipment - Tests and measurements -- Part 11-2: Climatic tests - Test 11b: Combined/sequential cold, low air pressure and damp heat.
Organization: AENOR
Year: 2002
Status: Active
UNE 21136-5
Title:
ELECTRIC RELAYS. INSULATION TESTS FOR ELECTRICAL RELAYS.
Organization: AENOR
Year: 1993
Status: Inactive
UNE 20378-1
Title:
SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS. GENERAL REQUIREMENTS
Organization: AENOR
Year: 1986
Status: Inactive
UNE 20501-1
Title:
ENVIRONMENTAL TESTING. PART 1: GENERAL AND GUIDANCE.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 60901/A2
Title:
Single-capped fluorescent lamps - Performance specifications.
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 61965 ERTA
Title:
Mechanical safety of cathode ray tubes.
Organization: AENOR
Year: 2002
Status: Inactive
UNE-EN 60927
Title:
Auxiliaries for lamps - Starting devices (other than glow starters) - Performance requirements
Organization: AENOR
Year: 2008
Status: Active
UNE 26164-1
Title:
LAMPS FOR ROAD VEHICLES. GENERALITY, SAMPLES PERFORMANCES TESTS CONDITION AND PRODUCTION CONFORMITY.
Organization: AENOR
Year: 1989
Status: Inactive
UNE 20501-2-58
Title:
ENVIRONMENTAL TESTING. PART 2: TESTS. TEST TD: SOLDERABILITY, RESISTANCE TO DISSOLUTION OF METALLIZATION AND TO SOLDERING HEAT OF SURFACE MOUNTING DEVICES (SMD).
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 60933-4
Title:
Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B)
Organization: AENOR
Year: 1996
Status: Inactive
UNE 21136-20
Title:
ELECTRICAL RELAYS. PROTECTION (PROTECTIVE) SYSTEMS.
Organization: AENOR
Year: 1993
Status: Active
UNE 20546-3
Title:
SINGLE-TURN ROTARY WIREWOUND AND NON-WIREWOUND PRECISION POTENTIOMETERS, SELECTION OF METHODES OF TEST AND GENERAL REQUIREMENTS
Organization: AENOR
Year: 1983
Status: Active
UNE-EN 61347-2-12
Title:
Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-12:2005)
Organization: AENOR
Year: 2006
Status: Active
UNE 22093
Title:
ELECTRIC BULB FOR CAP LAMPS USED IN MINES AND QUARRIES.
Organization: AENOR
Year: 1972
Status: Inactive
UNE-EN 60061-2/A25
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders
Organization: AENOR
Year: 2004
Status: Active
UNE 20629-9
Title:
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ. CIRCULAR CONNECTORS FOR RADIO AND ASSOCIATED SOUND EQUIPMENT
Organization: AENOR
Year: 1981
Status: Inactive
UNE 200004-2
Title:
Reliability stress screening - Part 2: Electronic components
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60061-2/A39
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders
Organization: AENOR
Year: 2010
Status: Active
UNE 21302-2
Title:
ELECTROTECHNICAL VOCABULARY. ELECTROACOUSTICS.
Organization: AENOR
Year: 1973
Status: Inactive
UNE-EN 61360-2/A1
Title:
Standard data element types with associated classification scheme for electric components -- Part 2: EXPRESS dictionary schema.
Organization: AENOR
Year: 2005
Status: Inactive
UNE-EN ISO 11553-1
Title:
Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO 11553-1:2005)
Organization: AENOR
Year: 2009
Status: Inactive
UNE-EN 31252
Title:
LASERS AND LASER-RELATED EQUIPMENT. LASER DEVICE. MINIMUM REQUIREMENTS FOR DOCUMENTATION. (ISO 11252:1993).
Organization: AENOR
Year: 1995
Status: Inactive
UNE-EN 60061-3/A21
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 3: GAUGES
Organization: AENOR
Year: 2000
Status: Active
UNE-EN 60130-9 ERTA
Title:
Connectors for frequencies below 3 MHz -- Part 9: Circular connectors for radio and associated sound equipment.
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60061-3/A1
Title:
AAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 3: GAUGES.
Organization: AENOR
Year: 1998
Status: Active
UNE 20526-2
Title:
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING. PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES.
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60155
Title:
GLOW-STARTERS FOR FLUORESCENT LAMPS.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60512-11-1
Title:
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence
Organization: AENOR
Year: 2000
Status: Inactive
UNE 20539-3
Title:
DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES. PART 3: SUBRACKS AND ASSOCIATED PLUG-IN UNITS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE 20501-2-11
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST KA: SALT MIST
Organization: AENOR
Year: 1983
Status: Inactive
UNE 208003 IN
Title:
Recommendations for shielded enclosures.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 61788-6
Title:
Superconductivity -- Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors.
Organization: AENOR
Year: 2002
Status: Inactive
UNE-EN 175200
Title:
SECTIONAL SPECIFICATION: CIRCULAR CONNECTORS.
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 61058-1
Title:
Switches for appliances - Part 1: General requirements
Organization: AENOR
Year: 2004
Status: Inactive
UNE-EN 60061-2/A26
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60512-1-3
Title:
ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT. BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 1: GENERAL EXAMINATION. SECTION 3: TEST 1C - ELECTRICAL ENGAGEMENT LENGTH
Organization: AENOR
Year: 1999
Status: Active
UNE-EN 60512-23-3 CORR
Title:
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 23-3: Test 23c: Shielding effectiveness of connectors and accessories.
Organization: AENOR
Year: 2005
Status: Inactive
UNE 20057-10
Title:
BY-PIN, CAP GY16
Organization: AENOR
Year: 1980
Status: Inactive
UNE-EN 60749-19/A1
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 19: Die shear strength
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 50107-1
Title:
Signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1 kV but not exceeding 10 kV -- Part 1: General requirements
Organization: AENOR
Year: 2003
Status: Active
UNE 20501-2-21
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. PART 2: TEST. TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES.
Organization: AENOR
Year: 1994
Status: Inactive
UNE 20545-1
Title:
FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT. PART 1: GENERIC SPECIFICATION
Organization: AENOR
Year: 1985
Status: Active
UNE-EN 60738-1-2
Title:
Thermistors- Directly heated positive step-function temperature coefficient- Part 1-2: Blank detail specification- Heating element application- Assessment level EZ
Organization: AENOR
Year: 2008
Status: Active
UNE-EN 60286-5/A1
Title:
Packaging of components for automatic handling - Part 5: Matrix trays
Organization: AENOR
Year: 2009
Status: Inactive
UNE 20057-15
Title:
SCREW CAPS E10 AND GAUGES FOR TESTING
Organization: AENOR
Year: 1985
Status: Inactive
UNE-EN 61319-1/A11
Title:
Interconnections of satellite receiving equipment. Part 1: Europe
Organization: AENOR
Year: 2000
Status: Active
UNE-EN 60061-2/A1
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHAngeability and safety. Part 2: Lampholders.
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 61642 ERTA
Title:
Industrial a.c. networks affected by harmonics - Application of filters and shunt capacitors.
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60249-2-10/A3
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 10: EPOXIDE NON-WOVEN/WOVEN GLASS REINFORCED COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Inactive
UNE 20515
Title:
DIMENSIONS OF ELECTRONIC TUBES AND VALVES.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 61969-3
Title:
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 3: Sectional specification - Climatic, mechanical tests and safety aspects for cabinets and cases.
Organization: AENOR
Year: 2002
Status: Inactive
UNE 20629-3
Title:
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ (MC/S). BATTERY CONNECTORS
Organization: AENOR
Year: 1981
Status: Active
EA 0004
Title:
Technical specification of supply assembly for high intensity discharge lamps.
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60286-3
Title:
PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING. PART 3: PACKAGING OF SURFACE MOUNT COMPONENTS ON CONTINUOUS TAPES.
Organization: AENOR
Year: 2000
Status: Inactive
UNE 20539-2
Title:
DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 INCH) SERIES. PART 2: CABINETS AND PITCHES OF RACK STRUCTURES.
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 61076-4-001
Title:
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 4: PRINTED BOARD CONNECTORS. SECTION 001: BLANK DETAIL SPECIFICATION.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 61969-1
Title:
Mechanical structures for electronic equipment - Outdoor enclosures -- Part 1: Design guidelines.
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60130-9
Title:
Connectors for frequencies below 3 MHz -- Part 9:Circular connectors for radio and associated sound equipment.
Organization: AENOR
Year: 2002
Status: Inactive
UNE-EN 60061-4
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHAngeability and safety. Part 4: Guidelines and general information.
Organization: AENOR
Year: 1996
Status: Active
UNE 21321
Title:
LETTER SYMBOLS FOR SEMICONDUCTOR DEVICES AND INTEGRATED MICROCIRCUITS.
Organization: AENOR
Year: 1978
Status: Active
UNE-EN 60068-2-10
Title:
Environmental testing -- Part 2-10: Tests - Test J and guidance: Mould growth (IEC 60068-2-10:2005)
Organization: AENOR
Year: 2006
Status: Active
UNE-EN 60249-2-18/A2
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICTION Nº 18: BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTI...
Organization: AENOR
Year: 1997
Status: Inactive
UNE 20543-2
Title:
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
Organization: AENOR
Year: 1985
Status: Inactive
UNE-EN 60249-2-5
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº5: EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60512-4-3
Title:
Connectors for electronic equipment - Tests and measurements -- Part 4-3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 61249-2-8
Title:
Materials for printed boards and other interconnecting structures -- Part 2-8: Reinforced base materials clad and unclad - Modified brominated epoxide woven fibreglass reinforced laminated sheets o...
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60061-3/A2
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 3: GAUGES.
Organization: AENOR
Year: 1998
Status: Active
UNE 20057-8
Title:
TWO PIN CAP G5, 3.
Organization: AENOR
Year: 1978
Status: Inactive
UNE 20151
Title:
PLANT OF DISCHARGE LAMPS OR TUBES SUBMITTED TO VOLTAGES OVER 440 V.
Organization: AENOR
Year: 1970
Status: Active
UNE-EN 61347-2-3 CORR
Title:
Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60249-2-18/A3
Title:
Base materials for printed circuits -- Part 2: Specifications -- Specification No. 18: Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability ...
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60749-22
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 22: Bond strength
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 61988-2-2
Title:
Plasma display panels -- Part 2-2: Measuring methods - Optoelectrical
Organization: AENOR
Year: 2004
Status: Inactive
UNE-EN 60432
Title:
SAFETY REQUIREMENTS FOR TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN ISO 11149
Title:
OPTICS AND OPTICAL INSTRUMENTS. LASERS AND LASER-RELATED EQUIPMENT. FIBRE OPTIC CONNECTORS FOR NON-TELECOMMUNICATION LASER APPLICATIONS (ISO 11149:1997)
Organization: AENOR
Year: 2000
Status: Inactive
UNE-EN 61347-2-3 CORR
Title:
Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
Organization: AENOR
Year: 2011
Status: Inactive
UNE-EN 60268-12/A2
Title:
SOUND SYSTEM EQUIPMENT. PART 12: APPLICATION OF CONNECTORS FOR BROADCAST AND SIMILAR USE.
Organization: AENOR
Year: 1997
Status: Active
UNE-EN 60662/A7
Title:
HIGH-PRESSURE SODIUM VAPOUR LAMPS.
Organization: AENOR
Year: 1997
Status: Inactive
UNE-EN 60064/A5
Title:
Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
Organization: AENOR
Year: 2010
Status: Active
UNE 20378-2-3
Title:
SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS. PART 2: PARTICULAR REQUIREMENTS FOR TIME-DELAY SWITCHES (T.D.S)
Organization: AENOR
Year: 1989
Status: Inactive
UNE-EN 60933-5
Title:
AUDIO, VIDEO AND AUDIOVISUAL SYSTEMS. INTERCONNECTIONS AND MATCHING VALUES. PART 5: Y/C CONNECTOR FOR VIDEO SYSTEMS. ELECTICAL MATCHING VALUES AND DESCRIPTION OF THE CONNECTOR.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60061-3/A36
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges (IEC 60061-3:1969/A36:2006).
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 60061-4/A3
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 4: GUIDELINES AND GENERAL INFORMATION.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 61231
Title:
International lamp coding system (ILCOS)
Organization: AENOR
Year: 2011
Status: Active
UNE 20543-6
Title:
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT SECTIONAL SPECIFICATION. FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 61921
Title:
Power capacitors - Low-voltage power factor correction banks
Organization: AENOR
Year: 2004
Status: Active
UNE 20633
Title:
GUIDE TO THE USE OF VARIABLE CAPACITORS IN ELECTRONIC EQUIPMENT.
Organization: AENOR
Year: 1980
Status: Active
UNE-EN 60061-1/A4
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 1: LAMP CAPS.
Organization: AENOR
Year: 1998
Status: Active
UNE-IEC/TS 62143
Title:
Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology
Organization: AENOR
Year: 2011
Status: Active
UNE-EN 60061-4/A7
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 4: Guidelines and general information
Organization: AENOR
Year: 2003
Status: Active
UNE 20545-3
Title:
WIREWOUND FIXED RESISTORS TYPE 1. SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
Organization: AENOR
Year: 1975
Status: Active
UNE-EN 60925/A2
Title:
D.C. supplied electronic ballasts for tubular fluorescent lamps - Performance requirements.
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60399
Title:
Barrel thread for lampholders with shade holder ring
Organization: AENOR
Year: 2005
Status: Active
UNE-EN 61347-2-1
Title:
Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other than glow starters).
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 60432-1/A1
Title:
Incandescent lamps - Safety specifications -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999/A1:2005 modified)
Organization: AENOR
Year: 2006
Status: Active
UNE 71200
Title:
INFORMATION TECHNOLOGY. DATA COMMUNICATION 25-POLE DTE/DCE INTERFACE CONNECTOR AND CONTACT NUMBER ASSIGNMENTS.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 60061-4/A1
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 4: GUIDELINES AND GENERAL INFORMATION.
Organization: AENOR
Year: 1998
Status: Active
UNE 20501-2-41/1C
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST Z/BM: COMBINED DRY HEAT/LOW AIR PRESSURE TESTS
Organization: AENOR
Year: 1986
Status: Inactive
UNE 21136-15
Title:
ELECTRICAL RELAYS. PART 15: ENDURANCE TESTS FOR ELECTRICAL RELAY CONTACTS. SPECIFICATION FOR THE CHARACTERISTICS OF TEST EQUIPMENT.
Organization: AENOR
Year: 1990
Status: Inactive
UNE-EN ISO 11670
Title:
Lasers and laser-related equipment - Test methods for laser beam parameters - Beam positional stability (ISO 11670:2003)
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 50205
Title:
Relays with forcibly guided (mechanically linked) contacts
Organization: AENOR
Year: 2002
Status: Inactive
UNE 21302-521
Title:
International Electrotechnical Vocabulary (IEV) - Part 521: Semiconductor devices and integrated circuits
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60838-2-1
Title:
MISCELLANEOUS LAMPHOLDERS. PART 2: PARTICULAR REQUIREMENTS. SECTION 1: LAMPHOLDERS S14.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 60061-1/A2
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 1: LAMP CAPS.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 60255-1-00
Title:
ALL-OR-NOTHING ELECTRICAL RELAYS.
Organization: AENOR
Year: 1997
Status: Inactive
UNE 20620-2-12
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 12: THIN EPOXIDE WOVEN GLASS FABRIC COPPE-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY, FOR USE IN THE FABRICATION OF M...
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 61788-13
Title:
Superconductivity -- Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
Organization: AENOR
Year: 2004
Status: Inactive
UNE-EN 60512-12-5 CORR
Title:
Connectors for electronic equipment - Tests and measurements -- Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, soldering iron method
Organization: AENOR
Year: 2007
Status: Active
UNE-EN 60249-2-1/A3
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 1: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET, HIGH ELECTRICAL QUALITY.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60249-2-17/A3
Title:
Base materials for printed circuits -- Part 2: Specifications -- Specification No. 17: Thin polyimide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabricati...
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 50065-4-2/A1
Title:
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 4-2: Low voltage decoupling filters - Safety requirements.
Organization: AENOR
Year: 2003
Status: Active
UNE 133001-1
Title:
ATTACHMENTS TO PUBLIC SWITCHED TELEPHONE NETWORK (PSTN). GENERAL TECHNICAL REQUIREMENTS FOR EQUIPMENT CONNECTED TO AN ANALOGUE SUBSCRIBER INTERFACE IN THE PSTN. PART 1: GENERAL.
Organization: AENOR
Year: 1995
Status: Active
UNE-EN 61549
Title:
Miscellaneous lamps
Organization: AENOR
Year: 2004
Status: Active
UNE-IEC 60512-7
Title:
Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests
Organization: AENOR
Year: 2005
Status: Active
UNE-EN 60249-2-19/A2
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 19: THIN BISMALEIMIDE/TRIAZINE MODIFIED EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY ...
Organization: AENOR
Year: 1997
Status: Active
UNE-EN ISO 12005
Title:
Lasers and laser-related equipment - Test methods for laser beam parameters - Polarization (ISO 12005:2003)
Organization: AENOR
Year: 2004
Status: Inactive
UNE-EN 60749-31
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 31: Flammability of plastic-encapsulated devices (internally induced)
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60061-3/A4
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 3: GAUGES.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 60924
Title:
D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS. GENERAL AND SAFETY REQUIREMENTS.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 60512-25-6
Title:
Connectors for electronic equipment - Tests and measurements -- Part 25-6: Test 25f: Eye pattern and jitter
Organization: AENOR
Year: 2005
Status: Active
UNE 21136-12
Title:
ELECTRICAL RELAYS. DIRECTIONAL RELAYS AND POWER RELAYS WITH TWO INPUT ENERGIZING QUANTITIES.
Organization: AENOR
Year: 1990
Status: Active
UNE-EN 60061-2/A2
Title:
LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY. PART 2: LAMPHOLDERS.
Organization: AENOR
Year: 1998
Status: Active
UNE-EN 61360-4
Title:
Standard data element types with associated classification scheme for electric components. Part 4: IEC reference collection of standard data element types, component classes and terms.
Organization: AENOR
Year: 2004
Status: Inactive
UNE-EN 60898/A12
Title:
CIRCUIT-BREAKERS FOR OVERCURRENT ROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE 20823
Title:
RECOMMENDATION FOR CAPACITORS FOR INDUCTIVE HEAT GENERATING PLANTS OPERATING AT FREQUENCIES BETWEEN 40 AND 24000 HZ.
Organization: AENOR
Year: 1992
Status: Inactive
UNE-EN 60871-1
Title:
Shunt capacitors for a.c. power systems having a rated voltage above 1 kV. Part 1: General. Performance, testing and rating. Safety requirements. Guide for installation and operation.
Organization: AENOR
Year: 2001
Status: Inactive
UNE-EN 60898/A18
Title:
CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS.
Organization: AENOR
Year: 1999
Status: Inactive
UNE-EN 60512-13-1 CORR
Title:
Connectors for electronic equipment - Tests and measurements -- Part 13-1: Mechanical operation tests - Test 13a: Engaging and separating forces
Organization: AENOR
Year: 2007
Status: Active
UNE 20531
Title:
PREFERRED NUMBER SERIES FOR RESISTORS AND CAPACITORS
Organization: AENOR
Year: 1979
Status: Active
UNE-EN 60738-1-3
Title:
Thermistors- Directly heated positive step-function temperature coefficient- Part 1-3: Blank detail specification- Inrush current application- Assessment level EZ
Organization: AENOR
Year: 2008
Status: Active
UNE-EN 61076-1/A1
Title:
CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS. PART 1: GENERIC SPECIFICATION. CAPABILITY APPROVAL.
Organization: AENOR
Year: 1999
Status: Inactive
UNE 20501-2-49
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. GUIDANCE TO TEST KC: SULPHUR DIOXIDE TEST FOR CONTACTS AND CONNECTIONS
Organization: AENOR
Year: 1986
Status: Active
UNE-EN 60061-4/A6
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 4: Guidelines and general information.
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 60749-29
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 29: Latch-up test
Organization: AENOR
Year: 2004
Status: Inactive
UNE-EN 60512-6-2
Title:
Connectors for electronic equipment - Tests and measurements -- Part 6-2: Dynamic stress tests - Test 6b: Bump.
Organization: AENOR
Year: 2002
Status: Active
UNE 20502-11
Title:
SOUND SYSTEM EQUIPMENT. PART 11: APPLICATION OF CONNECTORS FOR THE INTERCONNECTION OF SOUND SYSTEM COMPONENTS.
Organization: AENOR
Year: 1994
Status: Inactive
UNE-EN 60062
Title:
Marking codes for resistors and capacitors
Organization: AENOR
Year: 2005
Status: Inactive
EA 0033
Title:
Voltage stabilizer and step-down light dimmer foe street lighting installations. Performance requirements.
Organization: AENOR
Year: 2008
Status: Active
UNE-EN 60917-1
Title:
Modular order for the development of mechanical structures for electronic equipment practices - Part 1: Generic standard
Organization: AENOR
Year: 2001
Status: Inactive
UNE 20538
Title:
NON-WIREWOUND POTENTIOMETERS TYPE 2
Organization: AENOR
Year: 1981
Status: Active
UNE 21302-445 ERTA
Title:
Electrotechnical Vocabulary - Part 445: Specified time all-or-nothing relays.
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60512-6-5
Title:
Electromechanical components for electronic equipment - Basic testing procedures and measuring methods -- Part 6: Dynamic stress tests -- Section 5: Test 6e: Random vibration.
Organization: AENOR
Year: 2000
Status: Active
UNE-EN 61347-2-3/A1
Title:
Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps
Organization: AENOR
Year: 2006
Status: Inactive
UNE-EN 50065-4-7
Title:
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz and 1,6 MHz to 30 MHz -- Part 4-7: Portable low voltage decoupling filters - Safety requirements
Organization: AENOR
Year: 2006
Status: Active
UNE 21405-2/1M
Title:
Letter symbols to be used in electrical technology -- Part 2: Telecommunications and electronics.
Organization: AENOR
Year: 2000
Status: Inactive
UNE-EN 60061-2/A23
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 2: Lampholders
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 60512-3-1
Title:
Connectors for electronic equipment - Tests and measurements -- Part 3-1: Insulation tests - Test 3a: Insulation resistance.
Organization: AENOR
Year: 2002
Status: Active
UNE-EN 60268-12
Title:
SOUND SYSTEM EQUIPMENT. PART 12: APPLICATION OF CONNECTORS FOR BROADCAST AND SIMILAR USE.
Organization: AENOR
Year: 1997
Status: Active
UNE 20501-2-39
Title:
BASIC ENVIRONMENTAL TESTING PROCEDURES. TEST Z/AMD: COMBINED SEQUENTIAL COLD, LOW AIR PRESSURE, AND DAMP HEAT TEST
Organization: AENOR
Year: 1983
Status: Inactive
UNE-EN 60249-2-14/A3
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 14: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), ECONOMIC QUAL...
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60749-2
Title:
Semiconductor devices - Mechanical and climatic test methods -- Part 2: Low air pressure.
Organization: AENOR
Year: 2003
Status: Active
UNE 20543-2/1M
Title:
FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. SECTIONAL SPECIFICATION. FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
Organization: AENOR
Year: 1990
Status: Inactive
UNE-EN 61643-341
Title:
Components for low-voltage surge protective devices - Part 341: Specification for thyristor surge suppressors (TSS)
Organization: AENOR
Year: 2003
Status: Inactive
UNE-EN 60249-2-8
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 8: FLEXIBLE COPPER-CLAD POLYESTER (PETP) FILM.
Organization: AENOR
Year: 1996
Status: Active
UNE-EN 60249-2-12/A4
Title:
Base materials for printed circuits -- Part 2-12: Specifications: thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer print...
Organization: AENOR
Year: 2001
Status: Active
UNE 20353-2-2
Title:
SWITCHES FOR APPLIANCES. PARTICULAR SPECIFICATIONS FOR SWITCHES OF MICRO-GAP CONSTRUCTION
Organization: AENOR
Year: 1989
Status: Inactive
UNE 21405-2
Title:
LETTER SYMBOLS TO BE USED IN ELECTRICAL TECHNOLOGY. PART 2: TELECOMMUNICATIONS AND ELECTRONICS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE 21821
Title:
MICROPROCESSOR SYSTEM BUS FOR 1 TO 4 BYTE DATA.
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60512-11-11
Title:
Connectors for electronic equipment - Tests and measurements -- Part 11-11: Climatic tests - Test 11k: Low air pressure.
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 60969/A2
Title:
Self-ballasted lamps for general lighting services - Performance requirements.
Organization: AENOR
Year: 2001
Status: Active
UNE-EN 61347-2-10
Title:
Lamp controlgear -- Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes)
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60061-3/A27
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety -- Part 3: Gauges
Organization: AENOR
Year: 2004
Status: Active
UNE-IEC 60512-9
Title:
Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests
Organization: AENOR
Year: 2005
Status: Active
UNE 20396/1C
Title:
BALLASTS FOR LOW-PRESSURE SODIUM VAPOUR LAMPS
Organization: AENOR
Year: 1979
Status: Inactive
UNE-EN 61086-2
Title:
SPECIFICATION FOR COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS). PART 2: METHODS OF TEST.
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60512-11-9
Title:
Connectors for electronic equipment - Tests and measurements -- Part 11-9: Climatic tests - Test 11i: Dry heat.
Organization: AENOR
Year: 2003
Status: Active
UNE-EN 60249-2-6/A3
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 6: PHENOLIC CELLULOSE PAPER COPPER-CLAD LAMINATED SHEET OF DEFINED FLAMMABILITY (HORIZONTAL BURNING TEST).
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN 60061-2/A27
Title:
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
Organization: AENOR
Year: 2004
Status: Active
UNE-EN 60188
Title:
High-pressure mercury vapour lamps - Performance specifications.
Organization: AENOR
Year: 2002
Status: Active
UNE 20620-2-11
Title:
BASE MATERIALS FOR PRINTED CIRCUITS. PART 2: SPECIFICATIONS. SPECIFICATION Nº 11: THIN EPOXIDE WOVEN GLASS FABRIC COPPER-CLAD LAMINATED SHEET, GENERAL PURPOSE GRADE, FOR USE IN THE FABRICATION OF M...
Organization: AENOR
Year: 1993
Status: Inactive
UNE-EN 60920/A2
Title:
BALLAST FOR TUBULAR FLUORESCENT LAMPS. GENERAL AND SAFETY REQUIREMENTS.
Organization: AENOR
Year: 1996
Status: Inactive
UNE-EN ISO 13695
Title:
Optics and photonics - Lasers and laser-related equipment - Test methods for the spectral characteristics of lasers (ISO 13695:2004)
Organization: AENOR
Year: 2006
Status: Active
Search Within Electronics