ICAO 8971
Title:
Protocol Relating to an Amendment to the Convention on International Civil Aviation (Article 56) Signed at Vienna, on 7 July 1971
Organization: ICAO
Year: 1971
Status: Active
IEC 60041
Title:
Field Acceptance Tests to Determine the Hydraulic Performance of Hydraulic Turbines, Storage Pumps and Pump-Turbines
Organization: IEC
Year: 1991
Status: Active
ISO 13480
Title:
Polyethylene pipes - Resistance to slow crack growth - Cone test method
Organization: DS
Status: Inactive
IEC/TR 61127
Title:
High Pressure Xenon Short Arc Lamps - Dimensional, Electrical and Photometric Data and Cap Types
Organization: IEC
Year: 1992
Status: Active
ISO TR 13881
Title:
Petroleum and Natural Gas Industries - Classification and Conformity Assessment of Products, Processes and Services
Organization: ISO
Year: 2000
Status: Active
ISO 8706
Title:
Two-Wheeled Mopeds - Parking Stability of Side- and Centre-Stands
Organization: ISO
Year: 1990
Status: Active
ISO 1897-8
Title:
Phenol, o-Cresol, m-Cresol, p-Cresol, Cresylic Acid and Xylenols for Industrial Use - Methods of Test - Part VIII: Determination of o-Cresol Content (Cresylic Acid and Xylenols Only)
Organization: ISO
Year: 1977
Status: Inactive
INCITS/ISO/IEC 23270
Title:
Information technology C# Language Specification
Organization: ANSI
Year: 2003
Status: Active
ISO 4617-4
Title:
Paints and Varnishes - List of Equivalent Terms - Part 4
Organization: ISO
Year: 1986
Status: Inactive
IEC 60151-0
Title:
Measurements of the Electrical Properties of Electronic Tubes and Valves Part 0: Precautions Relating to Methods of Measurement of Electronic Tubes and Valves
Organization: IEC
Status: Active
ISO 3547
Title:
Plain Bearing - Wrapped Bushes - Dimensions, Tolerances and Methods of Checking First Edition
Organization: ISO
Year: 1976
Status: Inactive
ISO 6518-1
Title:
Road Vehicles - Ignition Systems - Part 1: Vocabulary
Organization: ISO
Year: 2002
Status: Active
ISO 24369
Title:
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of content of coarse particles in ceramic powders by wet sieving method
Organization: ISO
Year: 2005
Status: Active
ISO 447
Title:
Machine Tools - Direction of Operation of Controls
Organization: ISO
Year: 1984
Status: Active
ISO 9735-8
Title:
Electronic Data Interchange for Administration, Commerce and Transport (EDIFACT) - Application Level Syntax Rules (Syntax Version Number: 4, Syntax Release Number: 1) - Part 8: Associated Data in EDI
Organization: ISO
Year: 2002
Status: Active
ITU-T E.182
Title:
Application of Tones and Recorded Announcements in Telephone Services - Series E: Overall Network Operation, Telephone Service, Service Operation and Human Factors - Operation, Numbering, Routing a...
Organization: ITU-T
Year: 1998
Status: Active
ISO 16002
Title:
Stored cereal grains and pulses Guidance on the detection of infestation by live invertebrates by trapping
Organization: ISO
Year: 2004
Status: Active
ITU-T I.251.10
Title:
Number Identification Supplementary Services: Calling Name Identification Restriction - Series I: Integrated Services Digital Network Service Capabilities - Supplementary Services in ISDN (Study Gr...
Organization: ITU-T
Year: 1996
Status: Active
ISO 5843-6
Title:
Aerospace - List of Equivalent Terms - Part 6: Standard Atmosphere
Organization: ISO
Year: 1985
Status: Active
IEC 60748-1
Title:
Semiconductor Devices - Integrated Circuits - Part 1: General
Organization: IEC
Year: 2002
Status: Active
ITU-T N.67
Title:
Monitoring Television Transmissions - Use of the Field Blanking Interval - Maintenance of International Sound- Programme and Television Transmission Circuits (Study Group IV) 16 pp
Organization: ITU-T
Year: 1993
Status: Active
ITU-R M.626
Title:
Evaluation of the Quality of Digital Channels in the Maritime Mobile Service - Section 8B - Maritime Mobile Service; Telegraphy and Related Subjects
Organization: ITU-R
Year: 1986
Status: Active
ISO 2920
Title:
Whey Cheese - Determination of Dry Matter Content (Reference Method)
Organization: ISO
Year: 2004
Status: Active
ISO 10209-1
Title:
Technical Product Documentation - Vocabulary - Part 1: Terms Relating to Technical Drawings: General and Types of Drawings
Organization: ISO
Year: 1992
Status: Inactive
ISO 509
Title:
Pallet Trucks - Principal Dimensions
Organization: ISO
Year: 1996
Status: Inactive
ISO 21281
Title:
Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks Rules for the construction and layout of pedals
Organization: ISO
Year: 2005
Status: Active
ISO 5347-11
Title:
Methods for the Calibration of Vibration and Shock Pick-Ups - Part 11: Testing of Transverse Vibration Sensitivity
Organization: ISO
Year: 1993
Status: Inactive
ICAO CIRCULAR 282
Title:
Accident/Incident Reporting (ADREP) Annual Statistics - 1999
Organization: ICAO
Year: 2000
Status: Active
ISO 8283-3
Title:
Plastics Pipes and Fittings - Dimensions of Sockets and Spigots for Discharge Systems Inside Buildings - Part 3: Polypropylene (PP)
Organization: ISO
Year: 1992
Status: Active
ISO 8974
Title:
Plastics - Phenolic Resins - Determination of Residual Phenol Content by Gas Chromatography
Organization: ISO
Year: 2002
Status: Active
ISO/IEC 16509
Title:
Information Technology - Year 2000 Terminology
Organization: ISO
Year: 1999
Status: Active
ISO 16833
Title:
Road vehicles Wheels Measurement of radial and lateral run-out
Organization: ISO
Year: 2006
Status: Active
ISO 9935
Title:
Non-Destructive Testing - Penetrant Flaw Detectors - General Technical Requirements
Organization: ISO
Year: 1992
Status: Inactive
ITU-T Q.765 BIS
Title:
Signalling System No. 7 - Application Transport Mechanism: Test Purposes (TSS & TP) Series Q: Switch and Signalling Specifications of Signalling System No. 7 - ISDN User Part
Organization: ITU-T
Year: 1999
Status: Inactive
ISO 15141-2
Title:
Foodstuffs - Determination of Ochratoxin A in Cereals and Cereal Products - Part 2: High Performance Liquid Chromatographic Method with Bicarbonate Clean Up
Organization: ISO
Year: 1998
Status: Inactive
INDA
Title:
INDA Standard Test Methods Manual
Organization: INDA
Status: Active
ISO 4069
Title:
Building and Civil Engineering Drawings - Representation of Areas on Sections and Views - General Principles First Edition
Organization: ISO
Year: 1977
Status: Inactive
ISO 11234
Title:
Rubber Compounding Ingredients - Carbon Black (Pelletized) - Determination of Dust Content
Organization: ISO
Year: 1995
Status: Active
IEC 60835-1-3
Title:
Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: ...
Organization: IEC
Year: 1992
Status: Active
ISO/IEC 15474-1
Title:
Information Technology - CDIF Framework - Part 1: Overview
Organization: ISO
Year: 2002
Status: Active
ISO 20341
Title:
Surface chemical analysis Secondary-ion mass spectrometry Method for estimating depth resolution parameters with multiple delta-layer reference materials
Organization: ISO
Year: 2003
Status: Active
ISO/IEC TR 10029
Title:
Information Technology - Telecommunications and Information Exchange between Systems - Operation of an X.25 Interworking Unit
Organization: ISO
Year: 1989
Status: Inactive
ISO 9869
Title:
Thermal Insulation - Building Elements - In-Situ Measurements of Thermal Resistance and Thermal Transmittance
Organization: ISO
Year: 1994
Status: Inactive
IPC-AI-640
Title:
User's Guidelines for Automated Inspection of Unpopulated Thick Film Hybrid Substrates
Organization: IPC
Year: 1987
Status: Inactive
ITU-T E.106
Title:
International Emergency Preference Scheme (IEPS) for disaster relief operations SERIES E: OVERALL NETWORK OPERATION, TELEPHONE SERVICE, SERVICE OPERATION AND HUMAN FACTORS International operation -...
Organization: ITU-T
Year: 2003
Status: Active
ISO 390
Title:
Products in Fibre-Reinforced Cement - Sampling and Inspection
Organization: ISO
Year: 1993
Status: Active
ITU-T H.460.10
Title:
Call party category within H.323 systems SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services - Supplementary services for multimedia
Organization: ITU-T
Year: 2004
Status: Active
ISO/IEC 11582
Title:
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Generic Functional Protocol for the Support of Supplementary Services - ...
Organization: ISO
Year: 2002
Status: Active
ITU-T Q.1711
Title:
Network Functional Model for IMT-2000 Series Q: Switching and Signalling Signalling Requirements and Protocols for IMT-2000
Organization: ITU-T
Year: 1999
Status: Active
ISO 9288
Title:
Thermal Insulation - Heat Transfer by Radiation - Physical Quantities and Definitions
Organization: ISO
Year: 1989
Status: Active
ISO 69
Title:
Cinematography - 16 mm Motion-Picture and Magnetic Film - Cutting and Perforating Dimensions
Organization: ISO
Year: 1998
Status: Active
INCITS/ISO/IEC 2382-1
Title:
Information technology - Vocabulary - Part 1: Fundamental terms
Organization: ANSI
Year: 1993
Status: Active
ISO 3565
Title:
Meat and Meat Products - Detection of Salmonellae (Reference Method)
Organization: ISO
Year: 1975
Status: Inactive
IEC 61847
Title:
Ultrasonics - Surgical Systems - Measurement and Declaration of the Basic Output Characteristics
Organization: IEC
Year: 1998
Status: Active
IEC/PAS 62339-1
Title:
Modular component interfaces for surface-mount fluid distribution components - Part 1: Elastomeric seals
Organization: IEC
Year: 2003
Status: Inactive
ISO 4951-1
Title:
High Yield Strength Steel Bars and Sections - Part 1: General Delivery Requirements
Organization: ISO
Year: 2001
Status: Active
ISO 6680
Title:
International Cheque Remittance
Organization: ISO
Year: 1987
Status: Inactive
IEC 61029-2-2
Title:
Safety of Transportable Motor-Operated Electric Tools Part 2: Particular Requirements for Radial Arm Saws
Organization: IEC
Year: 1993
Status: Active
ISO 6882
Title:
Asparagus - Guide to Refrigerated Transport
Organization: ISO
Year: 1981
Status: Active
ISO 13411
Title:
Aerospace - Airframe Needle Roller, Cylindrical Roller and Track Roller Bearings - Technical Specification
Organization: ISO
Year: 1997
Status: Active
ISO 14952-2
Title:
Space systems Surface cleanliness of fluid systems Part 2: Cleanliness levels
Organization: ISO
Year: 2003
Status: Active
ISO 1977-2
Title:
Conveyor Chains, Attachments and Chain Wheels - Part II: Chain Wheels
Organization: ISO
Year: 1974
Status: Inactive
ISO 12957-2
Title:
Geosynthetics Determination of friction characteristics Part 2: Inclined plane test
Organization: ISO
Year: 2005
Status: Active
IEC/PAS 62250
Title:
Qualification and Performance Specification for Rigid Printed Boards
Organization: IEC
Year: 2001
Status: Inactive
ISO 3738-2
Title:
Hardmetals - Rockwell Hardness Test (Scale A) - Part 2: Preparation and Calibration of Standard Test Blocks First Edition
Organization: ISO
Year: 1988
Status: Active
ISO 10349-6
Title:
Photography - Photographic-Grade Chemicals - Test Methods - Part 6: Determination of Halide Content
Organization: ISO
Year: 1992
Status: Active
ISO 6678
Title:
Phosphoric Acid for Industrial Use - Determination of Lead Content - Atomic Absorption Spectrometric Method
Organization: ISO
Year: 1981
Status: Inactive
IEC 61702
Title:
Rating of Direct Coupled Photovoltaic (PV) Pumping Systems
Organization: IEC
Year: 1995
Status: Inactive
ISO 12653-1
Title:
Electronic Imaging - Test Target for the Black-and-White Scanning of Office Documents - Part 1: Characteristics
Organization: ISO
Year: 2000
Status: Active
ITU-R BR.1385
Title:
Exchange of Sound Programmes on Recordable Compact Discs (CR-R)
Organization: ITU-R
Year: 1998
Status: Inactive
IEC 60115-4-2
Title:
Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail Specification: Fixed Power Resistors Assessment Level F
Organization: IEC
Year: 1992
Status: Inactive
ISO/IEC 10021-4
Title:
Information Technology - Message Handling Systems (MHS): Message Transfer System - Abstract Service Definition and Procedures
Organization: ISO
Year: 2003
Status: Active
ITU-T M.2301
Title:
Performance objectives and procedures for provisioning and maintenance of IP-based networks SERIES M: TMN AND NETWORK MAINTENANCE: INTERNATIONAL TRANSMISSION SYSTEMS, TELEPHONE CIRCUITS, TELEGRAPHY...
Organization: ITU-T
Year: 2002
Status: Active
ISO 8422
Title:
Sequential sampling plans for inspection by attributes
Organization: ISO
Year: 2006
Status: Inactive
ISO 5567
Title:
Dehydrated Garlic - Determination of Volatile Organic Sulphur Compounds First Edition
Organization: ISO
Year: 1982
Status: Active
ISO 5562
Title:
Turmeric, Whole or Ground (Powdered) - Specification First Edition
Organization: ISO
Year: 1983
Status: Active
ISO TR 11688-2
Title:
Acoustics - Recommended Practice for the Design of Low-Noise Machinery and Equipment - Part 2: Introduction to the Physics of Low-Noise Design
Organization: ISO
Year: 1998
Status: Active
ISO 3437
Title:
Road Vehicles - Determination of Fuel Leakage in the Event of a Collision First Edition
Organization: ISO
Year: 1975
Status: Inactive
IEC 60874-19
Title:
Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex)
Organization: IEC
Year: 1995
Status: Inactive
ISO 13556
Title:
Road Vehicles - Localization of Exhaust System Leaks and Equipment Specifications
Organization: ISO
Year: 1998
Status: Active
IEC/PAS 62178
Title:
Temperature Cycling
Organization: IEC
Year: 2000
Status: Inactive
ISO TS 12780-1
Title:
Geometrical Product Specifications (GPS) Straightness Part 1: Vocabulary and parameters of straightness
Organization: ISO
Year: 2003
Status: Inactive
ISO 5553
Title:
Meat and Meat Products - Detection of Polyphosphates
Organization: ISO
Year: 1980
Status: Active
ITU-T X.852
Title:
Information Technology - Open Systems Interconnection - Protocol for the Commitment; Concurrency and Recovery Service Element: Protocol Specification - Series X: Data Networks and Open System Commu...
Organization: ITU-T
Year: 1997
Status: Active
IEC/TS 61170
Title:
Radiotherapy Simulators - Guidelines for Functional Performance Characteristics
Organization: IEC
Year: 1993
Status: Active
ITU-T Q.2971D
Title:
Digital Subscriber Signalling System No. 2 - User-Network Interface Layer 3 Specification for Point-to-Multipoint Call/Connection Control: Abstract Test Suite (ATS) and Partial Protocol Implementat...
Organization: ITU-T
Year: 1999
Status: Active
ITU-T H.450.12
Title:
Common Information Additional Network Feature for H.323 Series H: Audiovisual and Multimedia Systems Supplementary Services for Multimedia
Organization: ITU-T
Year: 2001
Status: Active
ISO 13806
Title:
Vitreous and Porcelain Enamels - Corrosion Tests in Closed Systems
Organization: ISO
Year: 1999
Status: Inactive
INDEX
Title:
Total Index of Material Specifications and Test Methods
Organization: ISUZU
Year: 2000
Status: Inactive
IEC/TR 61998
Title:
Model and Framework for Standardization in Multimedia Equipment and Systems
Organization: IEC
Year: 1999
Status: Inactive
IEC/TR 62225
Title:
Guidance On Terms for Connectors and Mechanical Structures in Electronic Equipment
Organization: IEC
Year: 2001
Status: Inactive
ITU-T M.3604
Title:
Application of Maintenance Principles to ISDN Primary Rate Access
Organization: ITU-T
Year: 1992
Status: Active
INCITS/ISO/IEC 14496-6
Title:
Information technology - Coding of audio-visual objects - Part 6: Delivery Multimedia Integration Framework (DMIF)
Organization: ANSI
Year: 2000
Status: Active
ISO 11785
Title:
Radio-Frequency Identification of Animals - Technical Concept
Organization: ISO
Year: 1996
Status: Active
IEC MISC UNCERT
Title:
Guide to the Expression of Uncertainty in Measurement
Organization: IEC
Year: 1995
Status: Inactive
IEC/PAS 61076-3-111
Title:
Connectors for Electronic Equipment - Part 3-111: Detail Specification 8-Way, Shielded and Unshielded, Free and Fixed Connectors, for Industrial Environments for Frequencies up to 250 MHz
Organization: IEC
Year: 2002
Status: Inactive
ITU-R BS.412
Title:
Planning Standards for Terrestrial FM Sound Broadcasting at VHF
Organization: ITU-R
Year: 1998
Status: Active
ISO TS 17090-3
Title:
Health Informatics - Public Key Infrastructure - Part 3: Policy Management of Certification Authority
Organization: ISO
Year: 2002
Status: Inactive
I-ETS 300 837
Title:
Public Switched Telephone Network (PSTN); Terminals for Low Bit-Rate Multimedia Communication
Organization: ETSI
Year: 1998
Status: Active
IEC 60118-1
Title:
Hearing Aids - Part 1: Hearing Aids with Induction Pick-Up Coil Input
Organization: IEC
Year: 1999
Status: Inactive
ISO 5970
Title:
Furniture - Chairs and Tables for Educational Institutions - Functional Sizes
Organization: ISO
Year: 1979
Status: Inactive
ISO 12865
Title:
Ophthalmic instruments Retinoscopes
Organization: ISO
Year: 2006
Status: Active
ISO 731-2
Title:
Formic Acid for Industrial Use - Methods of Test - Part II: Determination of Total Acidity - Titrimetric Method
Organization: ISO
Year: 1977
Status: Inactive
IEC 60236
Title:
Methods for the Designation of Electrostatic Deflecting Electrodes of Cathode-Ray Tubes
Organization: IEC
Year: 1974
Status: Active
ISO 4012
Title:
Concrete - Determination of Compressive Strength of Test Specimens
Organization: ISO
Year: 1978
Status: Inactive
ITU-R BS.468
Title:
Measurement of Audio-Frequency Noise Voltage Level in Sound Broadcasting - Section 10C - Audio-Frequency Characteristics of Sound-Broadcasting Signals
Organization: ITU-R
Year: 1986
Status: Active
IEC/TR 60099-3
Title:
Surge Arresters Part 3: Artificial Pollution Testing of Surge Arresters
Organization: IEC
Year: 1990
Status: Inactive
ISO 1888
Title:
Textile glass Staple fibres or filaments Determination of average diameter
Organization: ISO
Year: 2006
Status: Active
ITU-T G.728 ANX H
Title:
Coding of Speech at 16 Kbit/s Using Low-Delay Code Excited Linear Prediction Annex H: Variable Bit Rate LD-CELP Operation Mainly for DCME at Rates Less Than 16 Kbit/s - Series G: Transmission Syste...
Organization: ITU-T
Year: 1999
Status: Active
IEEE C57.19.03
Title:
REQUIREMENTS, TERMINOLOGY AND TEST CODE FOR BUSHINGS FOR DC APPLICATIONS
Organization: IEEE
Status: Active
ISO 8868
Title:
Fluorspar - Sampling and Sample Preparation
Organization: ISO
Year: 1989
Status: Inactive
IEEE 1477
Title:
Standard for Passenger Information System for Rail Transit Vehicles
Organization: IEEE
Year: 1998
Status: Active
ITU-T V.130
Title:
ISDN Terminal Adaptor Framework - Data Communication over the Telephone Network (Study Group 14) 23 pp
Organization: ITU-T
Year: 1995
Status: Active
ISO/IEC 11179-4
Title:
Information technology Metadata registries (MDR) Part 4: Formulation of data definitions
Organization: ISO
Year: 2004
Status: Active
ISO 10304-2
Title:
Water Quality - Determination of Dissolved Anions by Liquid Chromatography of Ions - Part 2: Determination of Bromide, Chloride, Nitrate, Nitrite, Orthophosphate and Sulfate in Waste Water
Organization: ISO
Year: 1995
Status: Inactive
IECQ QC 300800
Title:
Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
Organization: IEC
Year: 2006
Status: Inactive
ISO/IEC 9318-4
Title:
Information Technology - Intelligent Peripheral Interface Part 4: Device Generic Command Set for Magnetic Tape Drives (IPI-3 Tape)
Organization: ISO
Year: 2002
Status: Active
IEC 60078
Title:
Characteristic Impedances and Dimensions of Radio-Frequency Coaxial-Cables
Organization: IEC
Status: Inactive
IEC 60654-3
Title:
Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences
Organization: IEC
Year: 1983
Status: Active
ISO 14616
Title:
Plastics - Heatshrinkable Films of Polyethylene, Ethylene Copolymers and their Mixtures - Determination of Shrinkage Stress and Contraction Stress
Organization: ISO
Year: 1997
Status: Active
IVE-10
Title:
Flanges; Test and Gage Connections for 15,000- LB Christmas Trees
Organization: HI
Year: 1990
Status: Inactive
ISO 6561-1
Title:
Fruits, vegetables and derived products Determination of cadmium content Part 1: Method using graphite furnace atomic absorption spectrometry
Organization: ISO
Year: 2005
Status: Active
ISO 1033
Title:
Aircraft - Dimensions for General Purpose Push-Pull Three-Pole Circuit-Breakers
Organization: ISO
Year: 1975
Status: Active
IEC/TR 61804-4
Title:
Function blocks (FB) for process control - Part 4: EDD interoperability guideline
Organization: IEC
Year: 2006
Status: Inactive
ISO 9095
Title:
Steel Tubes - Continuous Character Marking and Colour Coding for Material Identification
Organization: ISO
Year: 1990
Status: Inactive
ISO 9241-3
Title:
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements
Organization: ISO
Year: 1992
Status: Inactive
ISO 5211-2
Title:
Part-Turn Valve Actuator Attachment - Part 2: Flange and Coupling Performance Characteristics
Organization: ISO
Year: 1979
Status: Inactive
ISO 15568
Title:
Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations
Organization: ISO
Year: 1998
Status: Inactive
ISO 7624
Title:
Petroleum Products and Lubricants - Inhibited Mineral Turbine Oils - Determination of Oxidation Stability
Organization: ISO
Year: 1997
Status: Active
IEC/PAS 62129
Title:
Calibration of optical spectrum analyzers
Organization: IEC
Year: 2004
Status: Inactive
IFI-130
Title:
Structural Splitting Self-Plugging Pull Mandrel Blind Rivets
Organization: IFI/FASTNR
Year: 2003
Status: Active
ISO TR 12735-2
Title:
Mechanical Testing of Metals - Symbols Used with Their Definitions - Part 2: Recommendations for the Development of Symbols and Definitions
Organization: ISO
Year: 1996
Status: Inactive
ISO/IEC ISP 12068-1-01
Title:
Information Technology - International Standardized Profile FDI 4 - Directory Data for OSI TP - Part 1: FDI 41 - Basic Naming and Addressing
Organization: CSA
Year: 2001
Status: Inactive
ISO 11788-3
Title:
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 3: Pig Farming
Organization: ISO
Year: 2000
Status: Inactive
ISO/IEC TR 10171
Title:
Information Technology - Telecommunications and Information Exchange Between Systems - List of Standard Data Layer Link Protocols that Utilize High-Level Data Link Control (HDLC) Classes of Procedu...
Organization: ISO
Year: 2000
Status: Active
ISO 3115
Title:
Castings in Magnesium Alloys Containing Zirconium - Chemical Composition and Mechanical Properties
Organization: ISO
Year: 1981
Status: Inactive
ISO 2789
Title:
Information and documentation - International library statistics
Organization: DS
Status: Inactive
ISO/IEC 4873
Title:
Information Technology - ISO 8-Bit Code for Information Interchange - Structure and Rules for Implementation
Organization: ISO
Year: 1991
Status: Active
ITU-T I.150
Title:
B-ISDN Asynchronous Transfer Mode Functional Characteristics - Series I: Integrated Services Digital Network - General Structure - General Description of Asynchronous Transfer Mode
Organization: ITU-T
Year: 1999
Status: Active
ISO 4067-1
Title:
Technical Drawings - Installations - Part 1: Graphical Symbols for Plumbing, Heating, Ventilation and Ducting
Organization: ISO
Year: 1984
Status: Inactive
ISO 15635
Title:
Coated Abrasives - Flap Discs
Organization: ISO
Year: 2001
Status: Active
ISO/IEC 9804
Title:
Information Technology - Open Systems Interconnection - Service Definition for the Commitment, Concurrency and Recovery Service Element
Organization: ISO
Year: 1998
Status: Active
IEEE 1076.3
Title:
Standard VHDL Synthesis Packages
Organization: IEEE
Year: 1997
Status: Inactive
IEC 60268-15
Title:
Sound System Equipment - Part 15: Preferred Matching Values for the Interconnection of Sound System Components
Organization: IEC
Year: 1996
Status: Inactive
IEC 62255-4
Title:
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 4: Aerial drop cables - Secti...
Organization: IEC
Year: 2005
Status: Active
ISO 9360-2
Title:
Anaesthetic and Respiratory Equipment - Heat and Moisture Exchangers (HMEs) for Humidifying Respired Gases in Humans Part 2: HMEs for Use with Tracheostomized Patients Having Minimum Tidal Volumes ...
Organization: ISO
Year: 2001
Status: Active
ISO TR 13739
Title:
Petroleum Products - Methods for Specifying Practical Procedures for the Transfer of Bunker Fuels to Ships
Organization: ISO
Year: 1998
Status: Inactive
IEC 60780
Title:
Nuclear Power Plants - Electrical Equipment of the Safety System - Qualification
Organization: IEC
Year: 1998
Status: Inactive
ISO/IEC TR 14652
Title:
Information technology Specification method for cultural conventions
Organization: ISO
Year: 2004
Status: Inactive
IEC 60624
Title:
Expression of the Performance of Pulse Generators
Organization: IEC
Year: 1978
Status: Active
ISO/IEC 14771
Title:
Information Technology - Open Distributed Processing - Naming Framework
Organization: ISO
Year: 1999
Status: Active
IEEE 597
Title:
Standard Practices and Requirements for General Purpose Thyristor DC Drives
Organization: IEEE
Year: 1983
Status: Inactive
IEC 60730-2-4
Title:
Automatic electrical controls for household and similar use - Part 2-4: Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type
Organization: IEC
Year: 2006
Status: Inactive
ISO 7440-2
Title:
Road Vehicles - Fuel Injection Equipment Testing - Part 2: Orifice Plate Flow-Measurement
Organization: ISO
Year: 1991
Status: Active
ISO 21415-3
Title:
Wheat and wheat flour Gluten content Part 3: Determination of dry gluten from wet gluten by an oven drying method
Organization: ISO
Year: 2006
Status: Active
ISO/IEC ISP 12059-6
Title:
Information Technology - International Standardized Profiles - OSI Management - Common Information for Management Functions - Part 6: Log Control
Organization: ISO
Year: 1995
Status: Inactive
IEC 60695-2-1/0
Title:
Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 0: Glow-Wire Test Methods - General
Organization: IEC
Year: 1994
Status: Inactive
ISO 17900
Title:
Agricultural Trailers - Balanced and Semi-Mounted Trailers - Determination of Payload, Vertical Static Load and Axle Load
Organization: ISO
Year: 2002
Status: Active
IEC 60318
Title:
IEC Artificial Ear, of the Wide Band Type, for the Calibration of Earphones Used in Audiometry
Organization: IEC
Year: 1970
Status: Inactive
ITU-T E.117
Title:
Terminal Devices Used in Connection with the Public Telephone Service (Other Than Telephones) - Telephone Network and ISDN Operation, Numbering, Routing and Mobile Service (Study Group 1) 7 pp
Organization: ITU-T
Year: 1994
Status: Active
IPC-A-44
Title:
Master Drawing for 4 Layer Multilayer Printed Boards
Organization: IPC
Year: 1989
Status: Inactive
ISO 7848
Title:
Shank Type Milling Cutters for Indexable Inserts - Designation
Organization: ISO
Year: 1986
Status: Inactive
ISO/IEC 16500-5
Title:
Information Technology - Generic Digital Audio-Visual Systems - Part 5: High and Mid-Layer Protocols
Organization: ISO
Year: 1999
Status: Active
ITU-T H.331
Title:
Broadcasting Type Audiovisual Multipoint Systems and Terminal Equipment (Study Group XV) 8 pp
Organization: ITU-T
Year: 1993
Status: Active
ISO 797
Title:
Aluminium and Aluminium Alloys - Determination of Silicon - Gravimetric Method
Organization: ISO
Year: 1973
Status: Active
IEC 61020-2-1
Title:
Electromechanical Switches for Use in Electronic Equipment Part 2: Sectional Specification for Rotary Switches Section 1 - Blank Detail Specification First Edition; (IECQ QC 960101)
Organization: IEC
Year: 1991
Status: Inactive
IEC 61053-1
Title:
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape on type Beta format - FM audio recording - Part 1: 625 line-50 field systems
Organization: IEC
Year: 1991
Status: Active
ISO 21482
Title:
Ionizing-radiation warning - Supplementary symbol
Organization: ISO
Year: 2007
Status: Active
ITU-R M.1032
Title:
Technical and Operational Characteristics of Land Mobile Systems Using Multi-Channel Access Techniques without a Central Controller
Organization: ITU-R
Year: 1994
Status: Inactive
ITU-T H.235 ANNEX G
Title:
Usage of the MIKEY key management protocol for the Secure Real Time Transport Protocol (SRTP) within H.235 SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services - Syst...
Organization: ITU-T
Year: 2005
Status: Inactive
ISO/IEC 7942-3
Title:
Information Technology - Computer Graphics and Image Processing - Graphical Kernel Systems (GKS) - Part 3: Audit Trail
Organization: ISO
Year: 1999
Status: Active
IEC 60411-3
Title:
Power Convertors for Electric Traction Part 3: Self-Commutated Convertors for Single-Phase Traction
Organization: IEC
Year: 1982
Status: Inactive
IECQ QC 440000
Title:
Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification
Organization: IEC
Year: 2006
Status: Inactive
IIIC-4
Title:
Friction Loss - Other Fluids; Friction Loss Modulus for 100 Feet of Pipe
Organization: HI
Year: 1990
Status: Inactive
ISO 55
Title:
Seedlac - Specification
Organization: ISO
Year: 1977
Status: Inactive
IEC 61262-4
Title:
Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion
Organization: IEC
Year: 1994
Status: Active
ISO 7482-3
Title:
Raw goat skins Part 3: Guidelines for grading on the basis of defects
Organization: ISO
Year: 2005
Status: Active
ITU-T P.920
Title:
Interactive Test Methods for Audiovisual Communications - Series P: Telephone Transmission Quality, Telephone Installations, Local Line Networks Audiovisual Quality in Multimedia Services
Organization: ITU-T
Year: 2000
Status: Active
IFI-524
Title:
Test Procedure for the Performance of Metric Nonmetallic Element Prevailing-Torque Screws
Organization: IFI/FASTNR
Year: 2002
Status: Active
IEC 60748-22
Title:
Semiconductor Devices - Integrated Circuits - Part 22: Sectional Specification for Film Integrated Circuits and Hybrid Film Integrated Circuits on the Basis of the Capability Approval Procedures
Organization: IEC
Year: 1997
Status: Active
IPC-HDBK-840
Title:
Solder Mask Handbook
Organization: IPC
Year: 2006
Status: Inactive
ITU-T P.300
Title:
Transmission Performance of Group Audio Terminals (GATs) Series P: Telephone Transmission Quality, Telephone Installations, Local Line Networks Subscribers' Lines and Sets
Organization: ITU-T
Year: 2001
Status: Active
ISO 6184-3
Title:
Explosion Protection Systems - Part 3: Determination of Explosion Indices of Fuel/Air Mixtures Other Than Dust/Air and Gas/Air Mixtures First Edition
Organization: ISO
Year: 1985
Status: Active
ISO TR 10314-2
Title:
Industrial Automation - Shop Floor Production - Part 2: Application of the Reference Model for Standardization and Methodology
Organization: ISO
Year: 1991
Status: Active
ISO 727-2
Title:
Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure Part 2:...
Organization: ISO
Year: 2005
Status: Active
IEC 60748-4-2
Title:
Semiconductor Devices - Integrated Circuits - Part 4: Interface Integrated Circuits - Section 2: Blank Detail Specification for Linear Analogue-to-Digital Converters (ADC)
Organization: IEC
Year: 1993
Status: Active
ISO 14797
Title:
Animal Feeding Stuffs - Determination of Furazolidone Content - Method Using High-Performance Liquid Chromatography
Organization: ISO
Year: 1999
Status: Active
ISO 6743-0
Title:
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 0: General
Organization: ISO
Year: 1981
Status: Inactive
IEC 61286
Title:
Information Technology Coded Graphic Character Set for Use in the Preparation of Documents Used in Electrotechnology and for Information Interchange
Organization: IEC
Year: 2001
Status: Inactive
ISO 4342
Title:
Numerical Control of Machines - NC Processor Input - Basic Part Program Reference Language
Organization: ISO
Year: 1985
Status: Active
ISO 9241-17
Title:
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 17: Form Filling Dialogues
Organization: ISO
Year: 1998
Status: Inactive
ISO/IEC 13866
Title:
Information Technology - Telecommunications and Information Exchange between Systems - Private Integrated Services Network - Specification, Functional Model and Information Flows - Call Completion ...
Organization: ISO
Year: 1995
Status: Active
IEEE 1545
Title:
Standard for Parametric Data Log Format
Organization: IEEE
Year: 1999
Status: Inactive
ISO 1241
Title:
Essential Oils - Determination of Ester Values, Before and After Acetylation, and Evaluation of the Contents of Free and Total Alcohols
Organization: ISO
Year: 1996
Status: Active
ISO/IEC 14363
Title:
Information Technology - Test Methods for Measuring Conformance to MHS-Based Electronic Messaging - Application Program Interface (API) (Language Independent)
Organization: ISO
Year: 1996
Status: Inactive
ISO 874
Title:
FRESH FRUITS AND VEGETABLES - SAMPLING
Organization: ISO
Status: Active
IEEE 803
Title:
Recommended Practice for Unique Identification in Power Plants and Related Facilities - Principles and Definitions
Organization: IEEE
Year: 1983
Status: Inactive
ITU-T Z.371
Title:
Graphic information for telecommunication management objects
Organization: ITU-T
Year: 2005
Status: Active
ISO/IEC 13719-3
Title:
Information Technology - Portable Common Tool Environment (PCTE) - Part 3: Ada Programming Language Binding
Organization: ISO
Year: 1998
Status: Active
ISO 3739-2
Title:
Industrial Tyres and Rims - Part 2: Pneumatic Tyres (Metric Series) on 5 Degree Tapered or Flat Base Rims - Load Ratings
Organization: ISO
Year: 1992
Status: Active
ISO 11001-2
Title:
Agricultural Wheeled Tractors and Implements - Three-Point Hitch Couplers - Part 2: A-Frame Coupler
Organization: ISO
Year: 1993
Status: Active
ISO 18910
Title:
Imaging Materials - Photographic Film and Paper - Determination of Curl
Organization: ISO
Year: 2000
Status: Active
ISO 10669
Title:
Plain Washers for Tapping Screw and Washer Assemblies - Normal and Large Series - Product Grade A
Organization: ISO
Year: 1999
Status: Active
ISO 9083
Title:
Calculation of Load Capacity of Spur and Helical Gears - Application to Marine Gears
Organization: ISO
Year: 2001
Status: Active
ISO 5692-1
Title:
Agricultural vehicles Mechanical connections on towed vehicles Part 1: Dimensions for hitch rings
Organization: ISO
Year: 2004
Status: Active
ISO TS 16732
Title:
Fire safety engineering - Guidance on fire risk assessment
Organization: ISO
Year: 2005
Status: Inactive
IEC 61076-4-108
Title:
Connectors for Electronic Equipment - Part 4-108: Printed Board Connectors with Assessed Quality - Detail Specification for Cable-to-Board Connectors with a Modular Pitch of 25 mm and Integrated Sh...
Organization: IEC
Year: 2002
Status: Active
ITU-T J.123
Title:
Multiplexing format for webcasting on the TCP/IP network SERIES J: CABLE NETWORKS AND TRANSMISSION OF TELEVISION, SOUND PROGRAMME AND OTHER MULTIMEDIA SIGNALS Interactive systems for digital Televi...
Organization: ITU-T
Year: 2002
Status: Active
ISO 13707
Title:
Petroleum and Natural Gas Industries - Reciprocating Compressors
Organization: ISO
Year: 2000
Status: Active
IEC 61284
Title:
Overhead Lines - Requirements and Tests for Fittings
Organization: IEC
Year: 1997
Status: Active
ISO 657-11
Title:
Hot-Rolled Steel Sections - Part 11: Sloping Flange Channel Sections (Metric Series) - Dimensions and Sectional Properties
Organization: ISO
Year: 1980
Status: Active
ISO 2639
Title:
Steel - Determination and Verification of the Depth of Carburized and Hardened Cases
Organization: ISO
Year: 2002
Status: Inactive
ISO/IEC 1155
Title:
Information Processing - Use of Longitudinal Parity to Detect Errors in Information Messages
Organization: ISO
Year: 1978
Status: Active
ISO 8778
Title:
Pneumatic Fluid Power - Standard Reference Atmosphere
Organization: ISO
Year: 2003
Status: Active
ITU-T M.1150
Title:
Maintenance Aspects of Maritime/Land Mobile Telecommunication Store-and-Forward Services (Packet Mode) Via Satellite
Organization: ITU-T
Year: 1997
Status: Active
ISO 6468
Title:
Water Quality - Determination of Certain Organochlorine Insecticides, Polychlorinated Biphenyls and Chlorobenzenes - Gas Chromatographic Method After Liquid-Liquid Extraction
Organization: ISO
Year: 1996
Status: Active
ISO 8001
Title:
Cinematography - Underexposed Motion-Picture Film Requiring Forced Development - Designation Method
Organization: ISO
Year: 1984
Status: Active
IEC 61663-2
Title:
Lightning Protection - Telecommunication Lines - Part 2: Lines Using Metallic Conductors
Organization: IEC
Year: 2001
Status: Inactive
ISO/IEC ISP 12063-5
Title:
Information Technology - International Standardized Profiles AMH3n - Message Handling Systems - EDI Messaging - Part 5: AMH34 - EDIMG Requirements for Enhanced MS Access (P7)
Organization: ISO
Year: 1997
Status: Inactive
ISO 3262-9
Title:
Extenders for Paints - Specifications and Methods of Test - Part 9: Calcined Clay
Organization: ISO
Year: 1997
Status: Active
IEC 61400-12
Title:
Wind Turbine Generator Systems - Part 12: Wind Turbine Power Performance Testing
Organization: IEC
Year: 1998
Status: Inactive
ISO 14726-2
Title:
Ships and Marine Technology - Identification Colours for the Content of Piping Sytems - Part 2: Additional Colours for Different Media and/or Functions
Organization: ISO
Year: 2002
Status: Inactive
ITU-T R.111
Title:
CODE AND SPEED INDEPENDENT TDM SYSTEM FOR ANISOCHRONOUS TELEGRAPH AND DATA TRANSMISSION
Organization: ITU-T
Year: 1993
Status: Active
ITU-T Q.291
Title:
Security Arrangements - General. Basic Security Arrangements. Types of Failure, Recognition of Failure and Abnormal Error Rates - Specifications of Signalling System No. 6 (Study Group XI) 4 pp
Organization: ITU-T
Year: 1988
Status: Inactive
IEC 61000-2-9
Title:
Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP Environment - Radiated Disturbance Basic EMC Publication First Edition
Organization: IEC
Year: 1996
Status: Active
ISO 6743-12
Title:
Lubricants, Industrial Oils and Related Products (Class L) - Classification - Part 12: Family Q (Heat Transfer Fluids)
Organization: ISO
Year: 1989
Status: Active
IEEE 474
Title:
STANDARD SPECIFICATIONS AND TEST METHODS FOR FIXED AND VARIABLE ATTENUATORS, DC TO 40 GHZ INCLUDING TRIAL-USE SECTIONS ON INSERTION- LOSS REPEATABILITY AND CHARACTERISTIC INSERTION LOSS OF A NONINS...
Organization: IEEE
Year: 1973
Status: Inactive
ISO 12857-3
Title:
Optics and Optical Instruments - Geodetic Instruments - Field Procedures for Determining Accuracy - Part 3: Electro-Optical Distance Meters (EDM Instruments)
Organization: ISO
Year: 1997
Status: Inactive
ICAO 7192 PART D-3
Title:
Training Manual Part D-3 Flight Operations Officers/Flight Dispatchers
Organization: ICAO
Year: 1998
Status: Active
IEEE 944
Title:
Recommended Practice for the Application and Testing of Uninterruptible Power Supplies for Power Generating Systems
Organization: IEEE
Year: 1986
Status: Inactive
ISO 14235
Title:
Soil Quailty - Determination of Organic Carbon by Sulfochromic Oxidation
Organization: ISO
Year: 1998
Status: Active
IFI-144
Title:
Test Evaluation Procedures for Coating Qualification Intended for Use on High-Strength Structural Bolts
Organization: IFI/FASTNR
Year: 2000
Status: Active
ISO 7206-8
Title:
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 8: Endurance Performance of Stemmed Femoral Components with Application of Torsion
Organization: ISO
Year: 1995
Status: Inactive
ISO 15390
Title:
Space environment (natural and artificial) Galactic cosmic ray model
Organization: ISO
Year: 2004
Status: Active
IEC 60466
Title:
A.C. Insulation-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and up to and Including 38 kV
Organization: IEC
Year: 1987
Status: Inactive
ISO 6360-6
Title:
Dentistry Number coding system for rotary instruments Part 6: Specific characteristics of abrasive instruments
Organization: ISO
Year: 2004
Status: Active
ISO 3827-4
Title:
Shipbuilding - Co-Ordination of Dimensions in Ships' Accommodation - Part IV: Controlling Dimensions First Edition
Organization: ISO
Year: 1977
Status: Inactive
ISO 6888-2
Title:
MICROBIOLOGY OF THE FOOD CHAIN - HORIZONTAL METHOD FOR THE ENUMERATION OF COAGULASE-POSITIVE STAPHYLOCOCCI (STAPHYLOCOCCUS AUREUS AND OTHER SPECIES) - PART 2: METHOD USING RABBIT PLASMA FIBRINOGEN ...
Organization: ISO
Status: Active
IEC 60808
Title:
Complementary Instrumentation for Counting Ratemeters Characteristics and Test Methods
Organization: IEC
Year: 1985
Status: Inactive
ITU-T F.63
Title:
Additional Facilities in the International Telex Service - Operations and Quality of Service; Telegraph Services (Study Group I) 5 pp
Organization: ITU-T
Year: 1993
Status: Active
ISO 8662-14
Title:
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 14: Stone-Working Tools and Needle Scalers
Organization: ISO
Year: 1996
Status: Inactive
IEC 61685
Title:
Ultrasonics - Flow Measurement Systems - Flow Test Object
Organization: IEC
Year: 2001
Status: Active
ISO 3233
Title:
Paints and Varnishes - Determination of Percentage Volume of Non-Volatile Matter by Measuring the Density of a Dried Coating
Organization: ISO
Year: 1998
Status: Inactive
INCITS/ISO/IEC 10026-5
Title:
Information technology Open Systems Interconnection Distributed Transaction Processing - Part 5: Application context proforma and guidelines when using OSI TP
Organization: ANSI
Year: 1998
Status: Active
ITU-T SUPP 29 SERIES Q
Title:
Service Modelling: Evolution to the Use of Object Oriented Techniques Series Q: Switching and Signalling
Organization: ITU-T
Year: 1999
Status: Active
ISO 7176-23
Title:
Wheelchairs - Part 23: Requirements and Test Methods for Attendant-Operated Stair-Climbing Devices
Organization: ISO
Year: 2002
Status: Inactive
ISO 228-1
Title:
Pipe Threads Where Pressure-Tight Joints Are Not Made on the Threads - Part 1: Dimensions, Tolerances and Designation
Organization: ISO
Year: 2000
Status: Active
ISO 576
Title:
Textile Machinery and Accessories - Paper Patterns for Dobbies - Dimensions
Organization: ISO
Year: 1976
Status: Inactive
IEC 60356
Title:
Dimensions for Commutators and Slip-Rings
Organization: IEC
Year: 1971
Status: Active
ISO 3043
Title:
Oil of Pimento Berry First Edition
Organization: ISO
Year: 1975
Status: Inactive
ITU-T Q.2119
Title:
B-ISDN ATM Adaptation Layer - Convergence Function for SSCOP Above the Frame Relay Core Service - Series Q: Switching and Signalling Broadband ISDN - ATM Adaptation Layer
Organization: ITU-T
Year: 1996
Status: Active
ISO/IEC 9506-5
Title:
Industrial automation systems - Manufacturing message specification - Part 5: Companion Standard for Programmable Controllers
Organization: ISO
Year: 1999
Status: Inactive
ISO 1992-6
Title:
Commercial Refrigerated Cabinets - Methods of Test - Part 6: Electrical Energy Consumption Test
Organization: ISO
Year: 1974
Status: Inactive
ITU-R F.162
Title:
USE OF DIRECTIONAL TRANSMITTING ANTENNAS IN THE FIXED SERVICE OPERATING IN BANDS BELOW ABOUT 30 MHz
Organization: ITU-R
Year: 1992
Status: Active
ISO 102
Title:
Aircraft - Gravity Filling Orifices
Organization: ISO
Year: 1990
Status: Active
IECQ QC 300302
Title:
Fixed Capacitors for Use in Electronic Equipment Part 4: Blank Detail Specification: Aluminium Electrolytic Capacitors with Solid Electrolyte Assessment Level E
Organization: ECIA
Year: 1985
Status: Inactive
IEC 60297-3-104
Title:
Mechanical structures for electronic equipment -Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units
Organization: IEC
Year: 2006
Status: Active
ISO/IEC ISP 11185-12
Title:
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions Part 12: FVT2116 - Generalized Telnet Synch Control ...
Organization: ISO
Year: 1995
Status: Inactive
IEC 60264-3-3
Title:
Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 3 - Specification for Non-Returnable Spools Made from Thermoplastic Material
Organization: IEC
Year: 1990
Status: Active
ISO 10942
Title:
Ophthalmic Instruments - Direct Ophthalmoscopes
Organization: ISO
Year: 2006
Status: Active
ISO/IEC TR 13532
Title:
Information Technology - Telecommunications and Information Exchange between Systems - Protocol Combinations to Provide and Support the OSI Network Service
Organization: ISO
Year: 1995
Status: Inactive
ISO 3694
Title:
Ammonium Sulphate for Industrial Use - Determination of Chloride Ions Content - Potentiometric Method
Organization: ISO
Year: 1977
Status: Inactive
ITU-R BS.645
Title:
Test Signals and Metering to Be Used on International Sound Programme Connections - Section 10C - Audio-Frequency Characteristics of Sound-Broadcasting Signals
Organization: ITU-R
Year: 1992
Status: Active
IEC 61823
Title:
Electrical installations for lighting and beaconing of aerodromes AGL series transformers
Organization: IEC
Year: 2002
Status: Active
ISO 14877
Title:
Protective Clothing for Abrasive Blasting Operations Using Granular Abrasives
Organization: ISO
Year: 2002
Status: Active
ISA 5.4
Title:
Instrument Loop Diagrams
Organization: ISA
Year: 1991
Status: Active
ICAO 9774
Title:
Manual on Certification of Aerodromes
Organization: ICAO
Year: 2001
Status: Active
ISO 5916
Title:
Methyl Chloride for Industrial Use - Determination of Impurities - Gas Chromatographic Methods
Organization: ISO
Year: 1982
Status: Inactive
ITU-R BT.796
Title:
PARAMETERS FOR ENHANCED COMPATIBLE CODING SYSTEMS BASED ON 625-LINE PAL AND SECAM TELEVISION SYSTEMS
Organization: ITU-R
Year: 1992
Status: Inactive
ISO 8548-5
Title:
Prosthetics and orthotics Limb deficiencies Part 5: Description of the clinical condition of the person who has had an amputation
Organization: ISO
Year: 2003
Status: Active
ITU-T E.508
Title:
FORECASTING NEW TELECOMMUNICATION SERVICES
Organization: ITU-T
Year: 1992
Status: Active
INCITS/ISO/IEC 10918-2
Title:
Information technology - Digital compression and coding of continuous-tone still images: Compliance testing
Organization: ANSI
Year: 1995
Status: Active
ISO 2891
Title:
Modular Units for Machine Tool Construction - Centre Bases and Columns Second Edition
Organization: ISO
Year: 1977
Status: Active
ISA RP42.1
Title:
Nomenclature for Instrument Tube Fittings
Organization: ISA
Year: 1992
Status: Inactive
ISO TS 17450-2
Title:
Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties
Organization: ISO
Year: 2002
Status: Inactive
ITU-T SERIE G.100 SUPP 29
Title:
Planning of Mixed Ananlogue - Digital Circuits (Chains, Connections) - Transmission Systems and Media - General Characteristics of International Telephone Connections and International Telephone C...
Organization: ITU-T
Year: 1993
Status: Active
INCITS/ISO/IEC 9636-5
Title:
Information Technology - Computer Graphics - Interfacing Techniques for Dialogues with Graphical Devices (CGI) - Functional Specification - Part 5: Input and Echoing
Organization: ANSI
Year: 1991
Status: Active
ISO 6345
Title:
Shipbuilding and Marine Structures - Windows and Side Scuttles - Vocabulary
Organization: ISO
Year: 1990
Status: Active
ISO 4004
Title:
Agricultural Tractors and Machinery - Track Widths First Edition
Organization: ISO
Year: 1983
Status: Active
ISO 16348
Title:
Metallic and other inorganic coatings Definitions and conventions concerning appearance
Organization: ISO
Year: 2003
Status: Active
ISO 4547
Title:
Metallic Materials - Hardness Test - Calibration of Standardized Blocks to Be Used for Knoop Hardness Testing Machines
Organization: ISO
Year: 1993
Status: Inactive
I-ETS 300 768
Title:
Private Integrated Services Network (PISN); Cordless Terminal Mobility (CTM); Authentication; Service Description
Organization: ETSI
Year: 1997
Status: Active
ISO 4422-2
Title:
Pipes and Fittings Made of Unplasticized Poly(Vinyl Chloride) (PVC-U) for Water Supply - Specifications - Part 2: Pipes (With or Without Integral Sockets)
Organization: ISO
Year: 1996
Status: Inactive
ISO 8662-1
Title:
Hand-Held Portable Power Tools - Measurement of Vibrations at the Handle - Part 1: General First Edition; (Corrected and Reprinted - 1988) (CEN EN 28662-1: 1992)
Organization: ISO
Year: 1988
Status: Inactive
ISO 581
Title:
Weldability - Definition
Organization: ISO
Year: 1980
Status: Inactive
ISO 1227
Title:
Starch, Including Derivatives and By-Products - Vocabulary
Organization: ISO
Year: 1979
Status: Inactive
INDEX OF VOL 110 PT 1
Title:
Index of Technical and Symposium Papers; Vol. 110, Part 1
Organization: ASHRAE
Year: 2004
Status: Active
ISO 75-3
Title:
Plastics - Determination of Temperature of Deflection under Load - Part 3: High Strength Thermosetting Laminates and Long-Fibre-Reinforced Plastics
Organization: ISO
Year: 2004
Status: Active
ISO 1265
Title:
Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles
Organization: ISO
Year: 2007
Status: Active
ISO 420
Title:
Photography - Processing Chemicals - Specifications for Potassium Bromide
Organization: ISO
Year: 1994
Status: Active
ISO 8835-4
Title:
Inhalational anaesthesia systems Part 4: Anaesthetic vapour delivery devices
Organization: ISO
Year: 2004
Status: Inactive
INCITS/ISO/IEC 14363
Title:
Information technology - Test methods for measuring conformance to MHS-based electronic messaging - Application Program Interface (API) [Language independent]
Organization: ANSI
Year: 1996
Status: Active
IPC-TR-465-3
Title:
Evaluation of Steam Aging on Alternative Finishes Round Robin Test Program Phase IIA
Organization: IPC
Year: 1996
Status: Active
ITU-R BT.807
Title:
Reference Model for Data Broadcasting
Organization: ITU-R
Year: 1992
Status: Active
ISO/IEC 7846
Title:
Industrial Real-Time FORTRAN - Application for the Control of Industrial Processes
Organization: ISO
Year: 1985
Status: Inactive
ITU-T X.950
Title:
Information Technology - Open Distributed Processing - Trading Function: Specification
Organization: ITU-T
Year: 1997
Status: Active
ISO 14617-7
Title:
Graphical Symbols for Diagrams - Part 7: Basic Mechanical Components
Organization: ISO
Year: 2002
Status: Active
ITU-T G.827.1
Title:
Availability Performance Objectives for End-to-End International Constant Bit-Rate Digital Paths At or Above the Primary Rate - Series G: Transmission Systems and Media, Digital Systems and Network...
Organization: ITU-T
Year: 2000
Status: Inactive
ISO 16854
Title:
Textile machinery Ring twisting machines Vocabulary
Organization: ISO
Year: 2004
Status: Active
IEC 61992-7-2
Title:
Railway applications - Fixed installations - DC switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and othe...
Organization: IEC
Year: 2006
Status: Active
ISO 3052
Title:
Gypsum Plasters - Determination of Water of Crystallization Content
Organization: ISO
Year: 1974
Status: Inactive
ISO 6634
Title:
Fruits, Vegetables and Derived Products - Determination of Arsenic Content - Silver Diethyldithiocarbamate Spectrophotometric Method; (PNS 587: 1992)
Organization: ISO
Year: 1982
Status: Active
IEC 61558-2-1
Title:
Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating tra...
Organization: IEC
Year: 2007
Status: Active
ISO 18232
Title:
Health Informatics Messages and communication Format of length limited globally unique string identifiers
Organization: ISO
Year: 2006
Status: Active
ISO 16149
Title:
Agricultural irrigation equipment PVC above-ground low-pressure pipe for surface irrigation Specifications and test methods
Organization: ISO
Year: 2006
Status: Active
ISO 4151
Title:
Road Vehicles - Mopeds - Type, Location and Functions of Controls
Organization: ISO
Year: 1987
Status: Active
ISO 3033-3
Title:
Oil of spearmint Part 3: Indian type (Mentha spicata L.), redistilled oil
Organization: ISO
Year: 2005
Status: Active
ISO 11788-1
Title:
Electronic Data Interchange between Information Systems in Agriculture - Agricultural Data Element Dictionary - Part 1: General Description
Organization: ISO
Year: 1997
Status: Inactive
IEC 61079-4
Title:
Methods of Measurement on Receivers for Satellite Broadcast Transmissions in the 12 GHz Band Part 4: Electrical Measurements on Sound/Data Decoder Units for the Digital Subcarrier NTSC System
Organization: IEC
Year: 1993
Status: Active
ISO/IEC 8832
Title:
Information Technology - Open Systems Interconnection - Specification of the Basic Class and Full Protocol for Job Transfer and Manipulation
Organization: ISO
Year: 1992
Status: Inactive
ISO 4056
Title:
Polyethylene (PE) Pipes and Fittings - Designation of Polyethylene, Based on Nominal Density and Melt Flow Index
Organization: ISO
Year: 1978
Status: Inactive
ITU-T H.460.14
Title:
Support for multilevel precedence and preemption (MLPP) within H.323 systems SERIES H: AUDIOVISUAL AND MULTIMEDIA SYSTEMS Infrastructure of audiovisual services - Supplementary services for multimedia
Organization: ITU-T
Year: 2004
Status: Active
ITU-T V.42 BIS
Title:
Data Compression Procedures for Data Circuit Terminating Equipment (DCE) Using Error Correction Procedures (Study Group XVII) 30 pp
Organization: ITU-T
Year: 1990
Status: Active
ISO 15814
Title:
Implants for Surgery - Copolymers and Blends Based on Polylactide - In Vitro Degradation Testing
Organization: ISO
Year: 1999
Status: Inactive
ISO 16832
Title:
Acoustics Loudness scaling by means of categories
Organization: ISO
Year: 2006
Status: Active
IEC 60094-11
Title:
Magnetic Tape Sound Recording and Reproducing Systems Part 11: Address Code for Compact Cassettes
Organization: IEC
Year: 1988
Status: Active
ISO 5143
Title:
Sodium Carbonate for Industrial Use - Determination of Sulphur Compounds Content - Method by Reduction and Titrimetry
Organization: ISO
Year: 1977
Status: Inactive
I-8
Title:
Soldering of Electronic Products
Organization: LIA
Status: Active
ISO TS 15624
Title:
Transport Information and Control Systems - Traffic Impediment Warning Systems (TIWS) - System Requirements
Organization: ISO
Year: 2001
Status: Active
ISO 3262-5
Title:
EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 5: NATURAL CRYSTALLINE CALCIUM CARBONATE
Organization: ISO
Status: Active
ISO 17063
Title:
Earth-moving machinery Braking systems of pedestrian-controlled machines Performance requirements and test procedures
Organization: ISO
Year: 2003
Status: Active
IEC 60560
Title:
Definitions and Terminology of Brush-Holders for Electrical Machines
Organization: IEC
Year: 1977
Status: Active
ISO 1518
Title:
Paints and Varnishes - Scratch Test
Organization: ISO
Year: 1992
Status: Inactive
ISO TS 15530-3
Title:
Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or standards
Organization: ISO
Year: 2004
Status: Inactive
ISO 15734
Title:
Ships and Marine Technology - Hydrostatic Release Units
Organization: ISO
Year: 2001
Status: Active
ITU-T Q.1224 FASCICLE 3/3
Title:
Distributed Functional Plane for Intelligent Network Capability Set 2: Parts 3 and 4 - Series Q: Switching and Signalling - Intelligent Network
Organization: ITU-T
Year: 1997
Status: Active
ISO 2380-2
Title:
Assembly tools for screws and nuts Screwdrivers for slotted-head screws Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers
Organization: ISO
Year: 2004
Status: Active
ISO 13793
Title:
Thermal Performance of Buildings - Thermal Design of Foundations to Avoid Frost heave
Organization: ISO
Year: 2001
Status: Active
ITU-T I.581
Title:
General Arrangements for B-ISDN Interworking - Series I: Integrated Services Digital Network Internetwork Interfaces
Organization: ITU-T
Year: 1997
Status: Active
ISO/IEC ISP 10609-20
Title:
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 20: Overview of the Generalized Multi-...
Organization: ISO
Year: 1995
Status: Inactive
ITU-R F.1493
Title:
Availability Objectives for Real Digital Radio-Relay Links Forming Part of National Portion Constant Bit Rate Digital Path at or Above the Primary Rate
Organization: ITU-R
Year: 2000
Status: Inactive
ISO TR 12037
Title:
Electronic Imaging - Recommendations for the Expungement of Information Recorded on Write-Once Optical Media
Organization: ISO
Year: 1998
Status: Active
ISO 8733
Title:
Parallel Pins with Internal Thread, of Unhardened Steel and Austenitic Stainless Steel
Organization: ISO
Year: 1997
Status: Active
ISO TS 20825
Title:
Road Vehicles - Drawbar Couplings, Drawbar Eyes, Fifth Wheel Kingpins, Hook Couplins and Toroidal Eyes - Wear Limits for in-use Mecahanical Couplings
Organization: ISO
Year: 2003
Status: Active
ITU-R BT.806
Title:
Common Channel Raster for the Distribution of D-MAC, D2-MAC and HD-MAC Signals in Collective Antenna and Cable Distribution Systems
Organization: ITU-R
Year: 1992
Status: Inactive
ISO/IEC ISP 10609-42
Title:
Information Technology - International Standardized Profiles TB, TC, TD and TE - Connection-Mode Transport Service over Connection-Mode Network Service - Part 42: Definition of Profile TD4111
Organization: ISO
Year: 1995
Status: Inactive
IEEE 1058
Title:
Recommended for Software Project Management Plans
Organization: IEEE
Year: 1998
Status: Inactive
ISO 3198
Title:
Sodium Hydroxide for Industrial Use - Determination of Sulphur Compounds - Method by Reduction and Titrimetry
Organization: ISO
Year: 1975
Status: Inactive
ISO 1833
Title:
Textiles - Binary Fibre Mixtures - Quantitative Chemical Analysis
Organization: ISO
Year: 1977
Status: Inactive
ISO 3625
Title:
Photography - Processing Chemicals - Specifications for Potassium Hydroxide
Organization: ISO
Year: 1994
Status: Active
ITU-T Q.834.1
Title:
ATM-PON requirements and managed entities for the network and network element views SERIES Q: SWITCHING AND SIGNALLING Q3 interface
Organization: ITU-T
Year: 2004
Status: Active
ISO 20079
Title:
Water quality Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) Duckweed growth inhibition test
Organization: ISO
Year: 2005
Status: Active
IEC/TS 61956
Title:
Methods of Test for the Evaluation of Water Treeing in Insulating Materials
Organization: IEC
Year: 1999
Status: Active
ISO 3200
Title:
Sodium and Potassium Silicates for Industrial Use - Determination of Sulphates Content - Barium Sulphate Gravimetric Method First Edition
Organization: ISO
Year: 1975
Status: Inactive
ISO 17858
Title:
Water quality - Determination of dioxinlike polychlorinated biphenyls - Method using gas chromatography/mass spectrometry
Organization: ISO
Year: 2007
Status: Active
IEC 60249-3-1
Title:
Base materials for printed circuits. Part 3: Special materials used in connection with printed circuits. Specification No. 1: Prepreg for use as bonding sheet material in the fabrication of multila...
Organization: IEC
Year: 1981
Status: Inactive
ISO 7393-1
Title:
Water Quality - Determination of Free Chlorine and Total Chlorine - Part 1: Titrimetric Method Using N,N-Diethyl-1,4- Phenylenediamine
Organization: ISO
Year: 1985
Status: Active
ISO 1812
Title:
Copper Alloys - Determination of Iron Content - 1,10-Phenanthroline Spectrophotometric Method
Organization: ISO
Year: 1976
Status: Active
ISO 7507-5
Title:
Petroleum and Liquid Petroleum Products - Calibration of Vertical Cylindrical Tanks - Part 5: External Electro-Optical Distance-Ranging Method
Organization: ISO
Year: 2000
Status: Active
ITU-T E.415
Title:
International Network Management Guidance for Common Channel Signalling System No. 7 (Study Group II) 10 pp
Organization: ITU-T
Year: 1991
Status: Active
INCITS/ISO/IEC 9796
Title:
Information Technology - Security Techniques - Digital Signature Scheme Giving Message Recovery
Organization: ANSI
Year: 1991
Status: Active
I-ETS 300 400
Title:
Integrated Services Digital Network (ISDN); Telephony Terminals; Payphones
Organization: ETSI
Year: 1995
Status: Active
ISO/IEC 6548
Title:
Data Processing - Description of Interface Between Process Computing System and Technical Process
Organization: ISO
Year: 1984
Status: Inactive
IIIB-5
Title:
Friction Loss - Water; Typical Resistance Coefficients for Valves and Fittings
Organization: HI
Year: 1990
Status: Inactive
ISO 2269
Title:
Shipbuilding - Class A Magnetic Compasses, Azimuth Reading Devices and Binnacles - Tests and Certification
Organization: ISO
Year: 1992
Status: Inactive
ISO 6558-2
Title:
Fruits, Vegetables and Derived Products - Determination of Carotene Content - Part 2: Routine Methods
Organization: ISO
Year: 1992
Status: Active
IPC/EIA J-STD-028
Title:
Performance Standard for Construction of Flip Chip and Chip Scale Bumps
Organization: IPC
Year: 1999
Status: Active
ISO 14649-11
Title:
Industrial automation systems and integration Physical device control Data model for computerized numerical controllers Part 11: Process data for milling
Organization: ISO
Year: 2004
Status: Active
ISO 9668
Title:
Pulps - Determination of Magnesium Content - Flame Atomic Absorption Spectrometric Method
Organization: ISO
Year: 1990
Status: Inactive
ISO TR 12662
Title:
Certification Scheme for Prestressing Steels
Organization: ISO
Year: 1997
Status: Inactive
ISO 12094
Title:
Welded Steel Tubes for Pressure Purposes - Ultrasonic Testing for the Detection of Laminar Imperfections in Strips/Plates Used in the Manufacture of Welded Tubes
Organization: ISO
Year: 1994
Status: Inactive
ISO 13752
Title:
Air Quality - Assessment of Uncertainty of a Measurement Method under Field Conditions Using a Second Method as Reference
Organization: ISO
Year: 1998
Status: Active
ISO/IEC 10729-1
Title:
Information Technology - Open Systems Interconnection - Conformance Test Suite for the Presentation Layer - Part 1: Test Suite Structure and Test Purposes for the Presentation Protocol (AS/NZS 4222...
Organization: ISO
Year: 1993
Status: Inactive
ISO 3856-6
Title:
Paints and Varnishes - Determination of "Soluble" Metal Content - Part 6: Determination of Total Chromium Content of the Liquid Portion of the Paint - Flame Atomic Absorption Spectrometric Method
Organization: ISO
Year: 1984
Status: Active
ISO 6327
Title:
Gas Analysis - Determination of the Water Dew Point of Natural Gas - Cooled Surface Condensation Hygrometers First Edition
Organization: ISO
Year: 1981
Status: Active
ISO 11866-1
Title:
Milk and milk products Enumeration of presumptive Escherichia coli Part 1: Most probable number technique using 4-methylumbelliferyl- â-D-glucuronide (MUG)
Organization: ISO
Year: 2005
Status: Active
ISO 11822
Title:
Information and Documentation - Extension of the Arabic Alphabet Coded Character Set for Bibliographic Information Interchange
Organization: ISO
Year: 1996
Status: Active
ISO 1990-1
Title:
Fruits - Nomenclature - First List
Organization: ISO
Year: 1982
Status: Active
ITU-T Q.811
Title:
Lower layer protocol profiles for the Q and X interfaces SERIES Q: SWITCHING AND SIGNALLING Q3 interface
Organization: ITU-T
Year: 2004
Status: Active
ISO 5815
Title:
Water Quality - Determination of Biochemical Oxygen Demand After 5 Days (BOD5) - Dilution and Seeding Method
Organization: ISO
Year: 1989
Status: Inactive
ISO 1552
Title:
Liquid Chlorine for Industrial Use - Method of Sampling (for Determining Only the Volumetric Chlorine Content)
Organization: ISO
Year: 1976
Status: Active
ISO 2501
Title:
Methyl Ethyl Ketone, isoButyl Methyl Ketone and isoAmyl Ethyl Ketone for Industrial Use - Determination of Alcoholic Impurities - Volumetric Method
Organization: ISO
Year: 1974
Status: Inactive
ITU-T S.8
Title:
Intercontinental Standardization of the Modulation Rate of Start-Stop Apparatus and of the Use of Combination No. 4 in Figure-Shift - Telegraphy Alphabetical Telegraph Terminal Equipment (Study Gro...
Organization: ITU-T
Year: 1993
Status: Active
ISO 9252
Title:
Synthetic Rubber Latex - Microbiological Examination
Organization: ISO
Year: 1989
Status: Inactive
ISO 1522
Title:
Paints and Varnishes - Pendulum Damping Test
Organization: ISO
Year: 2006
Status: Active
IFI-101
Title:
Torque-Tension Requirements for Prevailing-Torque Type Steel Hex and Hex Flange Nuts
Organization: IFI/FASTNR
Year: 2002
Status: Active
I-ETS 300 005
Title:
Business Telecommunications (BT); Transmission Characteristics at 4-Wire Analogue Interfaces of a Digital Private Automatic Branch Exchange (PABX)
Organization: ETSI
Year: 1991
Status: Active
IEC 61010-2-042
Title:
Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-042: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of M...
Organization: IEC
Year: 1997
Status: Inactive
ISO 9738
Title:
Aerospace - Turnbarrels, for Aircraft Control Wire Rope - Dimensions and Loads
Organization: ISO
Year: 2000
Status: Active
IEC 60862-3
Title:
Surface acoustic wave (SAW) filters of assessed quality Part 3: Standard outlines
Organization: IEC
Year: 2003
Status: Active
ISO 15022-1
Title:
Securities - Scheme for Messages (Data Field Dictionary) - Part 1: Data Field and Message Design Rules and Guidelines
Organization: ISO
Year: 1999
Status: Active
ISO 5063
Title:
Atomizing Oil Burners of the Monobloc Type - Testing
Organization: ISO
Year: 1978
Status: Inactive
IEC 60747-12-1
Title:
Semiconductor devices - Part 12: Optoelectronic devices - Section 1: Blank detail specification for light emitting/infrared emitting diodes with/without pigtail for fibre optic systems and sub-systems
Organization: IEC
Year: 1995
Status: Inactive
IEC 60588-4
Title:
Askarels for Transformers and Capacitors Part 4: Guide for Maintenance of Transformer Askarel in Equipment
Organization: IEC
Year: 1979
Status: Active
ISO 3262
Title:
Extenders for Paints First Edition; (PNS 492: 1991)
Organization: ISO
Year: 1975
Status: Inactive
ISO 6477
Title:
Cashew Kernels - Specification
Organization: ISO
Year: 1988
Status: Active
ISO 16042
Title:
Iron ores - Guidelines for the use of certified reference materials (CRMs)
Organization: ISO
Year: 2007
Status: Active
ISO 1942-3
Title:
Dental Vocabulary - Part 3: Dental Instruments
Organization: ISO
Year: 1989
Status: Inactive
ISO 2678
Title:
Environmental Tests for Aircraft Equipment - Insulation Resistance and High Voltage Tests for Electrical Equipment
Organization: ISO
Year: 1985
Status: Active
ISO 787-18
Title:
General Methods of Test for Pigments and Extenders - Part 18: Determination of Residue on Sieve - Mechanical Flushing Procedure
Organization: ISO
Year: 1983
Status: Active
ISO/IEC 12087-3
Title:
INFORMATION TECHNOLOGY - COMPUTER GRAPHICS AND IMAGE PROCESSING - IMAGE PROCESSING AND INTERCHANGE [IPI] - FUNCTIONAL SPECIFICATION - PART 3: IMAGE INTERCHANGE FACILITY [IIF]
Organization: ISO
Status: Active
ISO 4463-3
Title:
Measurement Methods for Building - Setting-Out and Measurement - Part 3: Check-Lists for the Procurement of Surveys and Measurement Services
Organization: ISO
Year: 1995
Status: Active
ISO 10427-2
Title:
Petroleum and natural gas industries Equipment for well cementing Part 2: Centralizer placement and stop-collar testing
Organization: ISO
Year: 2004
Status: Active
I-ETS 300 044-2
Title:
European Digital Cellular Telecommunications System (Phase 1); Mobile Application Part Specification Part 2: DCS Extension
Organization: ETSI
Year: 1993
Status: Active
ISO 6711
Title:
Gas Analysis - Checking of Calibration Gas Mixtures by a Comparison Method
Organization: ISO
Year: 1981
Status: Inactive
ISO 3519
Title:
Oil of lime distilled, Mexican type [Citrus aurantifolia (Christm.) Swingle]
Organization: ISO
Year: 2005
Status: Active
ISO 10422
Title:
Petroleum and Natural Gas Industries - Threading, Gauging, and Inspection of Casing, Tubing and Line Pipe Threads - Specification First Edition
Organization: ISO
Year: 1993
Status: Inactive
INCITS/ISO/IEC 18809
Title:
Information technology - 8 mm wide magnetic tape cartridge for information interchange - Helical scan recording AIT-1 with MIC format
Organization: ANSI
Year: 2000
Status: Active
IPC-4130
Title:
Specification and Characterization Methods for Nonwoven "E" Glass Mat
Organization: IPC
Year: 1998
Status: Active
ISO 8987
Title:
Plastics - Phenolic Resins - Determination of Reactivity on a B-Transformation Test Plate
Organization: ISO
Year: 2005
Status: Active
IEC 60615
Title:
Terminology for Microwave Apparatus
Organization: IEC
Year: 1978
Status: Active
IEC 61162-402
Title:
Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 402: Multiple talkers and multiple listeners Ship systems interconnection Documentation and test req...
Organization: IEC
Year: 2005
Status: Inactive
IPC-TM-650 2.6.3.5
Title:
Bare Board Cleanliness by Surface Insulation Resistance
Organization: IPC
Year: 2004
Status: Active
ISO 18629-43
Title:
Industrial automation systems and integration Process specification language Part 43: Definitional extension: Activity ordering and duration extensions
Organization: ISO
Year: 2006
Status: Active
ISO 10272
Title:
Microbiology of Food and Animal Feeding Stuffs - Horizontal Method for Detection of Thermotolerant Campylobacter
Organization: ISO
Year: 1995
Status: Inactive
ISO 172
Title:
Plastics - Phenol - Formaldehyde Mouldings - Detection of Free Ammonia
Organization: ISO
Year: 1978
Status: Active
ISO 22902-3
Title:
Road vehicles Automotive multimedia interface Part 3: System requirements
Organization: ISO
Year: 2006
Status: Active
ITU-T E.431
Title:
Service Quality Assessment for Connection Set-up and Release Delays (Study Group II) 6 pp
Organization: ITU-T
Year: 1992
Status: Active
ISO/IEC ISP 10608-13
Title:
Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 13: MAC Sublayer and Physical Layer Dependent ...
Organization: ISO
Year: 1994
Status: Inactive
ISO 7996
Title:
Ambient Air - Determination of the Mass Concentration of Nitrogen Oxides - Chemiluminescence Method
Organization: ISO
Year: 1985
Status: Active
IEC/TR 61200-413
Title:
Electrical Installation Guide - Part 413: Protection Against Indirect Contact - Automatic Disconnection of Supply
Organization: IEC
Year: 1996
Status: Inactive
ISO 965-4
Title:
ISO General Purpose Metric Screw Threads - Tolerances - Part 4: Limits of Sizes for Hot-Dip Galvanized External Screw Threads to Mate with Internal Screw Threads Tapped with Tolerance Position H or...
Organization: ISO
Year: 1998
Status: Active
ISO PAS 16940
Title:
Glass in building Glazing and airborne sound insulation Measurement of the mechanical impedance of laminated glass
Organization: ISO
Year: 2004
Status: Inactive
ICAO CIRCULAR 298
Title:
Training Guidelines for Aircraft Accident Investigators
Organization: ICAO
Year: 2003
Status: Active
I-214
Title:
Safety in the Selection and Proper Use of Struck or Hammered Tools
Organization: AISG
Status: Active
ISO 2079
Title:
Surface Treatment and Metallic Coatings - General Classification of Terms
Organization: ISO
Year: 1981
Status: Inactive
ISO 8421-5
Title:
Fire Protection - Vocabulary - Part 5: Smoke Control First Edition
Organization: ISO
Year: 1988
Status: Inactive
ISO 3262-12
Title:
Extenders for Paints - Specificstions and Methods of Test - Part 12: Muscovite-Type Mica
Organization: ISO
Year: 2001
Status: Active
ISO 1035-1
Title:
Hot-Rolled Steel Bars - Part 1: Dimensions of Round Bars
Organization: ISO
Year: 1980
Status: Active
IEC 61000-2-10
Title:
Electromagnetic Compatibility (EMC) - Part 2-10: Environment - Description of HEMP Environment - Conducted Disturbance
Organization: IEC
Year: 1998
Status: Active
ISO 4
Title:
Information and Documentation - Rules for the Abbreviation of Title Words and Titles of Publications
Organization: ISO
Year: 1997
Status: Active
IEC 60050-448
Title:
International Electrotechnical Vocabulary Chapter 448: Power System Protection
Organization: IEC
Year: 1995
Status: Active
ISO 7698
Title:
Cereals, Pulses and Derived Products - Enumeration of Bacteria, Yeasts and Moulds
Organization: ISO
Year: 1990
Status: Inactive
ISO 11841-1
Title:
Road Vehicles and Internal Combustion Engines - Filter Vocabulary Part 1: Definitiions of Filters and Filter Components
Organization: ISO
Year: 2000
Status: Active
IEC/TS 61970-401
Title:
Energy management system application program interface (EMS-API) Part 401: Component interface specification (CIS) framework
Organization: IEC
Year: 2005
Status: Active
ISO/IEC 14364
Title:
Information Technology - Open Systems Interconnection (OSI) Abstract Data Manipulation C Language Interfaces - Binding for Application Program Interface (API) First Edition
Organization: ISO
Year: 1996
Status: Inactive
IIIC-10
Title:
Friction Loss - Other Fluids; Friction Loss Modulus for 100 Feet of Pipe
Organization: HI
Year: 1990
Status: Inactive
ITU-R SM.326
Title:
Determination and Measurement of the Power of Amplitude-Modulated Radio Transmitters
Organization: ITU-R
Year: 1998
Status: Active
ISO/IEC 25435
Title:
Data Interchange on 60 mm Read-Only ODC Capacity: 1,8 Gbytes (UMDTM)
Organization: ISO
Year: 2006
Status: Active
ISO 7475
Title:
Mechanical Vibration - Balancing Machines - Enclosures and Other Protective Measures for the Measuring Station
Organization: ISO
Year: 2002
Status: Inactive
IEC 61182-1
Title:
Printed Boards - Electronic Data Description and Transfer - Part 1: Printed Board Description in Digital Form
Organization: IEC
Year: 1994
Status: Inactive
ITU-T I.761
Title:
Inverse Multiplexing for ATM (IMA) - Series I: Integrated Services Digital Network B-ISDN Equipment Aspects - Multiplexing Aspects
Organization: ITU-T
Year: 2000
Status: Active
ITU-R BR.1356
Title:
User Requirements for Application of Compression in Television Production
Organization: ITU-R
Year: 1998
Status: Inactive
ISO 14915-2
Title:
Software ergonomics for multimedia user interfaces Part 2: Multimedia navigation and control
Organization: ISO
Year: 2003
Status: Active
ISO 15764
Title:
Road vehicles Extended data link security
Organization: ISO
Year: 2004
Status: Inactive
ITU-T Q.1302
Title:
Telecommunication Applications for Switches and Computers (TASC) - TASC Functional Services - Intelligent Network (Study Group 11) 96 pp
Organization: ITU-T
Year: 1995
Status: Active
IEEE C37.71
Title:
Standard for Three-Phase, Manually Operated Subsurface and Vault Load-Interrupting Switches for Alternating-Current Systems
Organization: IEEE
Year: 2001
Status: Inactive
ISO 14962
Title:
Space Data and Information Transfer Systems - ASCII Encoded English
Organization: ISO
Year: 1997
Status: Active
ISO 9099
Title:
Air-Conditioning and Ventilation of Dry Provision Rooms on Board Ships - Design Conditions and Basis of Calculations First Edition
Organization: ISO
Year: 1987
Status: Active
IEC 61156-4-2
Title:
Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 4-2: Riser Cables - Capability Approval - Sectional Specification
Organization: IEC
Year: 2001
Status: Active
ITU-T X.581
Title:
Information Technology - Open Systems Interconnection - the Directory: Directory Access Protocol - Protocol Implementation Conformance Statement (PICS) Proforma - Data Networks and Open System Comm...
Organization: ITU-T
Year: 1995
Status: Inactive
ISO 12048
Title:
Packaging - Complete, Filled Transport Packages - Compression and Stacking Tests Using a Compression Tester
Organization: ISO
Year: 1994
Status: Active
IEC 60240-1
Title:
Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters
Organization: IEC
Year: 1992
Status: Active
IEC 61028
Title:
Electrical Measuring Instruments - X-Y Recorders
Organization: IEC
Year: 1991
Status: Active
ISO 11501
Title:
Plastics - Film and Sheeting - Determination of Dimensional Change on Heating
Organization: ISO
Year: 1995
Status: Active
IEC 60512-2-3
Title:
Connectors for Electronic Equipment; Tests and Measurements - Part 2-3: Electrical Continuity and Contact Resistance Tests - Test 2c: Contact Resistance Variation
Organization: IEC
Year: 2002
Status: Active
ISO 10436
Title:
Petroleum and Natural Gas Industries - General-Purpose Steam Turbines for Refinery Service
Organization: ISO
Year: 1993
Status: Inactive
IPC-SM-785
Title:
Guidelines for Accelerated Reliability Testing of Surface Mount Solder Attachments
Organization: IPC
Year: 1992
Status: Active
ISO 9241-9
Title:
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input Device
Organization: ISO
Year: 2000
Status: Inactive
ISO 7418
Title:
Leisure Accommodation Vehicles - Vocabulary; (CEN EN 27418: 1993)
Organization: ISO
Year: 1989
Status: Inactive
ISO 816
Title:
Rubber, Vulcanized - Determination of Tear Strength of Small Test Pieces (Delft Test Pieces)
Organization: ISO
Year: 1983
Status: Inactive
IEEE 1044.1
Title:
Guide to Classification for Software Anomalies
Organization: IEEE
Year: 1995
Status: Inactive
ISO 5744
Title:
Pliers and nippers Methods of test
Organization: ISO
Year: 2004
Status: Active
ISO 8640-2
Title:
Textile machinery and accessories Flat warp knitting machines Part 2: Vocabulary of warp let-off, fabric take-up and batching
Organization: ISO
Year: 2004
Status: Active
ISO/IEC GUIDE 60
Title:
Conformity assessment Code of good practice
Organization: ISO
Year: 2004
Status: Active
IEC 60936
Title:
Shipborne Radar Operational and Performance Requirements Methods of Tests and Required Test Results
Organization: IEC
Year: 1988
Status: Inactive
IEC 60679-5-1
Title:
Quartz Crystal Controlled Oscillators of Assessed Quality - Part 5-1: Blank Detail Specification - Qualification Approval
Organization: IEC
Year: 1998
Status: Active
ISO 3914-3
Title:
Textile Machinery and Accessories - Cylindrical Tubes - Part 3: Dimensions, Tolerances and Designation of Tubes for Tape Yarns
Organization: ISO
Year: 1994
Status: Active
ISO 1614
Title:
Glycerines for Industrial Use - Samples and Test Methods - General
Organization: ISO
Year: 1976
Status: Inactive
ISO 11042-1
Title:
Gas Turbines - Exhaust Gas Emission - Part 1: Measurement and Evaluation
Organization: ISO
Year: 1996
Status: Active
ISO/IEC 7498-4
Title:
Information Processing Systems - Open Systems Interconnection - Basic Reference Model - Part 4: Management Framework
Organization: ISO
Year: 1989
Status: Active
ISO 839-1
Title:
Milling machine arbors with 7/24 tapers Part 1: Dimensions and designation
Organization: ISO
Year: 2006
Status: Active
ISO 8665
Title:
Small craft Marine propulsion reciprocating internal combustion engines Power measurements and declarations
Organization: ISO
Year: 2006
Status: Active
ISO 19134
Title:
Geographic information - Location-based services - Multimodal routing and navigation
Organization: ISO
Year: 2007
Status: Active
IEC/TR 61117
Title:
Method for Assessing the Short-Circuit Withstand Strength of Partially Type-Tested Assemblies (PTTA)
Organization: IEC
Year: 1992
Status: Inactive
ISO 128
Title:
Technical Drawings - General Principles of Presentation
Organization: ISO
Year: 1982
Status: Inactive
ISO 20848-1
Title:
Packaging Plastics drums Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l
Organization: ISO
Year: 2006
Status: Active
ISO 5778
Title:
Ship amd Marine Technology - Small Weathertight Steel Hatches
Organization: ISO
Year: 1998
Status: Active
ITU-T G.176
Title:
Planning Guidelines for the Integration of ATM Technology into Networks Supporting Voiceband Services - Series G: Transmission Systems and Media, Digital Systems and Networks International Telephon...
Organization: ITU-T
Year: 1997
Status: Active
ISO TR 13841
Title:
Information Technology - Guidance on Measurement Techniques for 90 mm Optical Disk Cartridges
Organization: ISO
Year: 1995
Status: Active
ISO 3138
Title:
Anhydrous Hydrogen Fluoride for Industrial Use - Determination of Non-Volatile Acid Content - Titrimetric Method
Organization: ISO
Year: 1974
Status: Inactive
ISO 15749-2
Title:
Ships and marine technology Drainage systems on ships and marine structures Part 2: Sanitary drainage, drain piping for gravity systems
Organization: ISO
Year: 2004
Status: Active
ISO 13440
Title:
Equipment for Crop Protection - Agricultural Sprayers - Determination of the Volume of Total Residual
Organization: ISO
Year: 1996
Status: Active
ISO/IEC ISP 11185-15
Title:
Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 15: FVT2113 - Field Definition Management Con...
Organization: ISO
Year: 1995
Status: Inactive
IEC 60050-551
Title:
International Electrotechnical Vocabulary Part 551: Power Electronics
Organization: IEC
Year: 1998
Status: Active
ISO 7664
Title:
Rubber, Raw Natural and Synthetic - General Guidance on Storage
Organization: ISO
Year: 2000
Status: Active
ISO 2462
Title:
Sodium Chlorate for Industrial Use - Determination of Moisture Content - Gravimetric Method
Organization: ISO
Year: 1973
Status: Active
INCITS/ISO/IEC 23651
Title:
Information technology 8 mm wide magnetic tape cartridge for information interchange Helical scan recording AIT-3 format
Organization: ANSI
Year: 2003
Status: Active
ITU-R M.1455
Title:
Key characteristics for the International Mobile Telecommunications-2000 (IMT-2000) radio interfaces
Organization: ITU-R
Year: 2003
Status: Inactive
IPC-2546
Title:
Sectional Requirements for Shop-Floor Equipment Communication Messages (CAMX) for Printed Circuit Board Assembly
Organization: IPC
Year: 2005
Status: Active
ISO 105-J01
Title:
Textiles - Tests for Colour Fastness - Part J01: General Principles for Measurement of Surface Colour
Organization: ISO
Year: 1997
Status: Active
ISO 15614-10
Title:
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 10: Hyperbaric dry welding
Organization: ISO
Year: 2005
Status: Active
ISO 13584-31
Title:
Industrial Automation Systems and Integration - Parts Library - Part 31: Implementation Resources: Geometric Programming Interface
Organization: ISO
Year: 1999
Status: Active
ISO 3031
Title:
Roller Bearings - Thrust Needle Roller and Cage Assemblies, Thrust Washers - Boundary Dimensions and Tolerances
Organization: ISO
Year: 2000
Status: Active
IEC 60764
Title:
Sound Transmission Using Infra-Red Radiation
Organization: IEC
Year: 1983
Status: Inactive
ISO 2477
Title:
Shaped insulating refractory products - Determination of permanent change in dimensions on heating
Organization: ISO
Year: 2005
Status: Active
ITU-R BO.1294
Title:
Common Functional Requirments for the Reception of Digital Multiprogramme Television Emissions by Satelites Operating in the 11/12 GHz Frequency Range
Organization: ITU-R
Year: 1997
Status: Inactive
ISO 10354
Title:
Adhesives - Characterization of Durability of Structural -Adhesive-Bonded Assemblies - Wedge Rupture Test
Organization: ISO
Year: 1992
Status: Active
ISO 9236-3
Title:
Photography - Sensitometry of Screen/Film Systems for Medical Radiography - Part 3: Determination of Sensitometric Curve Shape, Speed and Average Gradient for Mammography
Organization: ISO
Year: 1999
Status: Active
IEC 61342
Title:
Nuclear Instrumentation - Multichannel Pulse Height Analyzers - Main Characteristics, Technical Requirements and Test Methods
Organization: IEC
Year: 1995
Status: Inactive
ISO/IEC TR 15504-8
Title:
Information Technology - Software Process Assessment - Part 8: Guide for Use in Determining Supplier Process Capability
Organization: ISO
Year: 1998
Status: Inactive
ISO/IEC 12227
Title:
Information Technology - Programming Languages - SQL/Ada Module Description Language (SAMeDL)
Organization: ISO
Year: 1995
Status: Inactive
ITU-T I.252.2
Title:
Call Forwarding Busy (Study Group I) 17 pp
Organization: ITU-T
Year: 1992
Status: Active
IEEE 1512.3
Title:
Standard for Hazardous Material Incident Management Message Sets for Use by Emergency Management Centers
Organization: IEEE
Year: 2006
Status: Active
ISO/IEC 15504-1
Title:
Information technology Process assessment Part 1: Concepts and vocabulary
Organization: ISO
Year: 2004
Status: Inactive
ISO TR 230-9
Title:
Test code for machine tools Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
Organization: ISO
Year: 2005
Status: Active
IEC 60574-1
Title:
Audio-Visual, Video and Television Equipment and Systems Part 1: General
Organization: IEC
Year: 1977
Status: Inactive
ICC SEC 79
Title:
Inspectorate Co-Ordination Committee (ICC) Membership of Working Groups
Organization: IECQ
Year: 1993
Status: Inactive
IEEE 185
Title:
STANDARD METHODS OF TESTING FREQUENCY MODULATION BROADCAST RECEIVERS
Organization: IEEE
Year: 1975
Status: Inactive
ISO 1002
Title:
Rolling Bearings - Airframe Bearings - Characteristics, Boundary Dimensions, Tolerances, Static Load Ratings
Organization: ISO
Year: 1983
Status: Active