EN 50238-1
Title: Railway applications - Compatibility between rolling stock and train detection systems - Part 1: General
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60904-7
Title: Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices
Organization: CENELEC
Year: 2019
Status: Active
EN 50413
Title: Basic standard on measurement and calculation procedures for human exposure to electric, magnetic and electromagnetic fields (0 Hz - 300 GHz)
Organization: CENELEC
Year: 2019
Status: Active
EN 50186-2
Title: Live-line washing systems for power installations with nominal voltages above 1kV - Part 2: Specific national requirements
Organization: CENELEC
Year: 1998
Status: Active
EN IEC 60068-3-3
Title: Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment
Organization: CENELEC
Year: 2019
Status: Active
EN 60317-0-1
Title: Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
Organization: CENELEC
Year: 2014
Status: Active
EN 60317-0-3
Title: Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire
Organization: CENELEC
Year: 2008
Status: Active
EN 60062
Title: Marking codes for resistors and capacitors
Organization: CENELEC
Year: 2016
Status: Active
CLC/TS 50586
Title: Open Smart Grid Protocol (OSGP)
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62985
Title: Methods for calculating size specific dose estimates (SSDE) on computed tomography
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61223-3-5
Title: Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests and and constancy tests - Imaging performance of computed tomography X-ray equipment
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62962
Title: Particular requirements for load-shedding equipment (LSE)
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 63044-5-3
Title: Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 5-3: EMC requirements for HBES/BACS used in industrial environments
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60974-7
Title: Arc welding equipment - Part 7: Torches
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61169-64
Title: Radio frequency connectors - Part 64: Sectional specification - RF coaxial connectors with 0,8 mm inner diameter of outer conductor - Characteristic impedance 50 O (type 0,8)
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60974-3
Title: Arc welding equipment - Part 3: Arc striking and stabilizing devices
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61169-1-2
Title: Radio-frequency connectors - Part 1-2: Electrical test methods - Insertion loss
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 63138-1
Title: Multi-channel radio frequency connectors - Part 1: Generic specification - General requirements and test methods
Organization: CENELEC
Year: 2019
Status: Active
EN 50980-1
Title: Remote alcohol monitoring devices - Test methods and performance requirements - Part 1: Instruments for assessment programmes
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60917-1
Title: Modular order for the development of mechanical structures for electrical and electronic equipment practices - Part 1: Generic standard
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61000-3-11
Title: Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current = 75 A ...
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61076-3-123
Title: Connectors for electrical and electronic equipment - Product requirements - Part 3-123: Rectangular connectors - Detail specification for hybrid connectors for industrial environments, for power su...
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 63044-5-1
Title: Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 63044-5-2
Title: Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-2: EMC requirements for HBES/BACS used in residential, commercial and light-industrial enviro...
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62878-2-5
Title: Device embedding assembly technology - Part 2-5: Guidelines - Implementation of a 3D data format for device embedded substrate
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62025-2
Title: High frequency inductive components - Non-electrical characteristics and measuring methods - Part 2: Test methods for non-electrical characteristics
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62668-1
Title: Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60335-2-111
Title: Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60601-2-46
Title: Medical electrical equipment - Part 2-46: Particular requirements for the basic safety and essential performance of operating tables
Organization: CENELEC
Year: 2019
Status: Active
EN 60851-5
Title: Winding wires - Test methods - Part 5: Electrical properties
Organization: CENELEC
Year: 2008
Status: Active
EN 60335-2-98
Title: Household and similar electrical appliances - Safety Part 2-98: Particular requirements for humidifiers
Organization: CENELEC
Year: 2013
Status: Active
EN IEC 62680-1-7
Title: Universal serial bus interfaces for data and power - Part 1-7: Common components - USB Audio 3.0 device class definition data formats
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62290-3
Title: Railway applications - Urban guided transport management and command/control systems - Part 3: System requirements specification
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61300-3-21
Title: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 63136
Title: Electric dishwashers for commercial use - Test methods for measuring the performance
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62680-1-5
Title: Universal serial bus interfaces for data and power - Part 1-5: Common components - USB Audio 3.0 device class definition
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62680-1-6
Title: Universal serial bus interfaces for data and power - Part 1-6: Common components - USB Audio 3.0 device class definition basic functions
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62680-1-8
Title: Universal serial bus interfaces for data and power - Part 1-8: Common components - USB Audio 3.0 device class definition terminal types
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60118-9
Title: Electroacoustics - Hearing aids - Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60565-2
Title: Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 2: Procedures for low frequency pressure calibration
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62209-3
Title: Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 3: Vector meas...
Organization: CENELEC
Year: 2019
Status: Active
EN 61643-31
Title: Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for photovoltaic installations
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60384-11
Title: Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil DC capacitors
Organization: CENELEC
Year: 2019
Status: Active
EN 60644
Title: Specification for high-voltage fuse-links for motor circuit applications
Organization: CENELEC
Year: 2009
Status: Active
EN IEC 60079-19
Title: Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
Organization: CENELEC
Year: 2019
Status: Active
EN 50465
Title: Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 62275
Title: Cable management systems - Cable ties for electrical installations
Organization: CENELEC
Year: 2019
Status: Active
EN 60068-2-64
Title: Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance
Organization: CENELEC
Year: 2008
Status: Active
EN IEC 61857-32
Title: Electrical insulation systems - Procedures for thermal evaluation - Part 32: Multifactor evaluation with increased factors during diagnostic testing
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62878-1
Title: Device embedding assembly technology - Part 1: Generic specification for device embedded substrates
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 63006
Title: Wireless power transfer (WPT) - Glossary of terms
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62885-9
Title: Surface cleaning appliances - Part 9: Floor treatment machines with or without traction drive, for commercial use - Methods for measuring the performance
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60794-1-23
Title: Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 63077
Title: Good refurbishment practices for medical imaging equipment
Organization: CENELEC
Year: 2019
Status: Active
EN 50411-3-3
Title: Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-3: Singlemode optical fibre fusion splice protectors
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60309-5
Title: Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low...
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60793-2
Title: Optical fibres - Part 2: Product specifications - General
Organization: CENELEC
Year: 2019
Status: Active
EN 50676
Title: Electrical equipment used for detection and concentration measurement of refrigerant gases - Performance requirements and test methods
Organization: CENELEC
Year: 2019
Status: Active
EN 50083-2-4
Title: Cable networks for television signals, sound signals and interactive services - Part 2-4: Interference Mitigation Filters operating in the 700 MHz and 800 MHz bands for DTT reception
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60904-4
Title: Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60077-3
Title: Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for DC circuit-breakers
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60512-28-100
Title: Connectors for electrical and electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 2 000 MHz - Tests 28a to 28g
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62858
Title: Lightning density based on lightning location systems (LLS) - General principles
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60317-27-3
Title: Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61535
Title: Installation couplers intended for permanent connection in fixed installations
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61300-2-54
Title: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-54: Tests - Corrosive atmosphere (mixed gas)
Organization: CENELEC
Year: 2019
Status: Active
EN 60335-2-49
Title: Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
Organization: CENELEC
Year: 2003
Status: Active
EN 62026-2
Title: Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i)
Organization: CENELEC
Year: 2013
Status: Active
EN IEC 60384-16
Title: Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric DC capacitors
Organization: CENELEC
Year: 2019
Status: Active
EN 61784-3-12
Title: Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12
Organization: CENELEC
Year: 2019
Status: Active
PREN 50696
Title: Contact Interface for Automated Connection Device
Organization: CENELEC
Year: 2020
Status: Pending
EN 60335-2-47
Title: Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
Organization: CENELEC
Year: 2003
Status: Active
EN 60335-2-48
Title: Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
Organization: CENELEC
Year: 2003
Status: Active
EN IEC 62311
Title: Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz to 300 GHz)
Organization: CENELEC
Year: 2020
Status: Active
EN 50614
Title: Requirements for the preparing for re-use of waste electrical and electronic equipment
Organization: CENELEC
Year: 2020
Status: Active
EN 60947-2
Title: Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
Organization: CENELEC
Year: 2017
Status: Active
EN 50553
Title: Railway applications - Requirements for running capability in case of fire on board of rolling stock
Organization: CENELEC
Year: 2012
Status: Active
EN 50159
Title: Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems
Organization: CENELEC
Year: 2010
Status: Active
EN IEC 62041
Title: Transformers, power supplies, reactors and similar products - EMC requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60730-2-22
Title: Automatic electrical controls - Part 2-22: Particular requirements for thermal motor protectors
Organization: CENELEC
Year: 2020
Status: Active
EN 50153
Title: Railway applications - Rolling stock - Protective provisions relating to electrical hazards
Organization: CENELEC
Year: 2014
Status: Active
EN 62026-3
Title: Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 62115
Title: Electric toys - Safety
Organization: CENELEC
Year: 2005
Status: Active
EN IEC 63078
Title: Installations for electroheating and electromagnetic processing - Test methods for induction through-heating installations
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60335-2-71
Title: Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61123
Title: Reliability testing - Compliance test plans for success ratio
Organization: CENELEC
Year: 2020
Status: Active
HD 60364-7-708/PRAA
Title: Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations
Organization: CENELEC
Year: 2020
Status: Pending
HD 60364-5-52/PRAB
Title: Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems
Organization: CENELEC
Year: 2020
Status: Pending
EN 50310
Title: Telecommunications bonding networks for buildings and other structures
Organization: CENELEC
Year: 2016
Status: Active
CLC IEC/TR 63069
Title: Industrial-process measurement, control and automation - Framework for functional safety and security
Organization: CENELEC
Year: 2020
Status: Active
EN 60335-2-78
Title: Household and similar electrical appliances - Safety Part 2-78: Particular requirements for outdoor barbecues
Organization: CENELEC
Year: 2003
Status: Active
EN IEC 63005-2
Title: Event video data recorder for road vehicle accidents - Part 2: Test methods for evaluating the performance of basic functions
Organization: CENELEC
Year: 2020
Status: Active
EN 61034-1
Title: Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus
Organization: CENELEC
Year: 2005
Status: Active
EN 50678
Title: General procedure for verifying the effectiveness of the protective measures of electrical equipment after repair
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62282-8-201
Title: EN IEC 62282-8-201
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62941
Title: Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62942
Title: File format for professional transfer and exchange of digital audio data
Organization: CENELEC
Year: 2020
Status: Active
EN 61034-2
Title: Measurement of smoke density of cables burning under defined conditions Part 2: Test procedure and requirements
Organization: CENELEC
Year: 2005
Status: Active
EN IEC 62368-1
Title: Audio/video, information and communication technology equipment - Part 1: Safety requirements
Organization: CENELEC
Year: 2014
Status: Active
EN IEC 61756-1
Title: Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems - Part 1: General and guidance
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63057
Title: Secondary cells and batteries containing alkaline or other nonacid electrolytes - Safety requirements for secondary lithium batteries for use in road vehicles not for the propulsion
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62282-8-102
Title: Fuel cell technologies - Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membranes, ...
Organization: CENELEC
Year: 2020
Status: Active
PREN 50377-15-1
Title: Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 15-1: Type MPO with 12 fibre PPS ferrules terminated on EN 60793-2 categor...
Organization: CENELEC
Year: 2020
Status: Pending
EN IEC 60098
Title: Analogue audio disk records and reproducing equipment
Organization: CENELEC
Year: 2020
Status: Active
EN 62841-4-1
Title: Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 4-1: Particular requirements for chain saws
Organization: CENELEC
Year: 2020
Status: Active
EN 50305
Title: Railway applications - Railway rolling stock cables having special fire performance - Test methods
Organization: CENELEC
Year: 2020
Status: Active
EN 50306-2
Title: Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 2: Single core cables
Organization: CENELEC
Year: 2020
Status: Active
EN 50306-4
Title: Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 4: Multicore and multipair screened or not screened sheathed cables
Organization: CENELEC
Year: 2020
Status: Active
EN 61000-4-25
Title: Electromagnetic compatibility (EMC) Part 4-25: Testing and measurement techniques - HEMP immunity test methods for equipment and systems
Organization: CENELEC
Year: 2002
Status: Active
EN 50306-3
Title: Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 3: Single core and multicore cables screened and thin wall sheathed
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63171-6
Title: Connectors for electrical and electronic equipment - Part 6: Detail specification for 2-way and 4-way (data/power), shielded, free and fixed connectors for power and data transmission with frequenc...
Organization: CENELEC
Year: 2020
Status: Active
EN 61810-1
Title: Electromechanical elementary relays - Part 1: General and safety requirements
Organization: CENELEC
Year: 2015
Status: Active
CLC/TR 50173-99-2
Title: Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4
Organization: CENELEC
Year: 2020
Status: Active
CLC/TR 50174-99-2
Title: Information technology - Cabling installation - Part 99-2: Mitigation and protection from electrical interference
Organization: CENELEC
Year: 2020
Status: Active
EN 50306-1
Title: Railway applications - Railway rolling stock cables having special fire performance - Thin wall - Part 1: General requirements
Organization: CENELEC
Year: 2020
Status: Active
EN 60570
Title: Electrical supply track systems for luminaires
Organization: CENELEC
Year: 2003
Status: Active
EN IEC 80601-2-78
Title: Medical electrical equipment - Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60118-13
Title: Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60601-2-66
Title: Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and essential performance of hearing aids and hearing aid systems
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 80601-2-60
Title: Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60580
Title: Medical electrical equipment - Dose area product meters
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61223-3-6
Title: Evaluation and routine testing in medical imaging departments - Part 3-6: Acceptance and constancy tests - Imaging performance of mammographic X-ray equipment used in a mammographic tomosynthesis m...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 80601-2-26
Title: Medical electrical equipment - Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60601-2-31
Title: Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60704-2-7
Title: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans
Organization: CENELEC
Year: 2020
Status: Active
EN IEC/IEEE 82079-1
Title: Preparation of information for use (instructions for use) of products - Part 1: Principles and general requirements
Organization: CENELEC
Year: 2020
Status: Active
EN 50119
Title: Railway applications - Fixed installations - Electric traction overhead contact lines
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60086-6
Title: Primary batteries - Part 6: Guidance on environmental aspects
Organization: CENELEC
Year: 2020
Status: Active
EN 60754-2
Title: Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Organization: CENELEC
Year: 2014
Status: Active
EN 50600-4-7
Title: Information technology - Data centre facilities and infrastructures - Part 4-7: Cooling Efficiency Ratio
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 55015
Title: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Organization: CENELEC
Year: 2019
Status: Active
EN 62841-3-4
Title: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-4: Particular requirements for transportable bench grinders
Organization: CENELEC
Year: 2016
Status: Active
EN 62823
Title: Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 61225
Title: Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for static uninterruptible DC and AC power supply systems
Organization: CENELEC
Year: 2020
Status: Active
EN 60754-1
Title: Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
Organization: CENELEC
Year: 2014
Status: Active
EN IEC 62368-3
Title: Audio/video, information and communication technology equipment - Part 3: Safety aspects for DC power transfer through communication cables and ports
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61293
Title: Marking of electrical equipment with ratings related to electrical supply - Safety requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62282-3-100
Title: Fuel cell technologies - Part 3-100: Stationary fuel cell power systeFuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety
Organization: CENELEC
Year: 2020
Status: Active
EN 50341-2-24
Title: Overhead electrical lines exceeding AC 1 kV - Part 2-24: National Normative Aspects (NNA) for Romania (based on EN 50341-1:2012)
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62932-2-2
Title: Flow battery energy systems for stationary applications - Part 2- 2: Safety requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61897
Title: Overhead lines - Requirements and tests for Aeolian vibration dampers
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62435-3
Title: Electronic components - Long-term storage of electronic semiconductor devices - Part 3: Data
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62932-2-1
Title: Flow battery energy systems for stationary applications - Part 2-1: Performance general requirements and test methods
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62932-1
Title: Flow battery energy systems for stationary applications - Part 1: Terminology and general aspects
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61854
Title: Overhead lines - Requirements and tests for spacers
Organization: CENELEC
Year: 2020
Status: Active
EN 50090-5-2
Title: Home and Building Electronic Systems (HBES) Part 5-2: Media and media dependent layers - Network based on HBES Class 1, Twisted Pair
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61300-2-4
Title: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62282-8-101
Title: Fuel cell technologies - Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversibl...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63093-5
Title: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 5: EP-cores and associated parts for use in inductors and transformers
Organization: CENELEC
Year: 2018
Status: Active
EN 50491-11
Title: General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 11: Smart Metering - Application Specifications - Simple External Cons...
Organization: CENELEC
Year: 2015
Status: Inactive
EN 55016-1-3
Title: Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-3: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Disturbance power
Organization: CENELEC
Year: 2006
Status: Active
EN IEC 61162-460
Title: Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 460: Multiple talkers and multiple listeners - Ethernet interconnection - Safety and security
Organization: CENELEC
Year: 2018
Status: Active
EN 45554
Title: General methods for the assessment of the ability to repair, reuse and upgrade energy-related products
Organization: CENELEC
Year: 2020
Status: Active
EN 50090-5-1
Title: Home and Building Electronic Systems (HBES) - Part 5-1: Media and media dependent layers - Power line for HBES Class 1
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60404-7
Title: Magnetic materials - Part 7: Method of measurement of the coercivity (up to 160 kA/m) of magnetic materials in an open magnetic circuit
Organization: CENELEC
Year: 2020
Status: Active
EN 50643
Title: Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
Organization: CENELEC
Year: 2018
Status: Active
EN IEC 61000-4-11
Title: Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to ...
Organization: CENELEC
Year: 2020
Status: Active
EN 50325-1
Title: Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 62148-6
Title: Fibre optic active components and devices - Package and interface standards - Part 6: ATM-PON transceivers
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62984-2
Title: High-temperature secondary batteries - Part 2: Safety requirements and tests
Organization: CENELEC
Year: 2020
Status: Active
EN 50559
Title: Electric room heating, underfloor heating, characteristics of performance - Definitions, method of testing, sizing and formula symbols
Organization: CENELEC
Year: 2013
Status: Active
EN 61850-8-1
Title: Communication networks and systems for power utility automation - Part 8-1: Specific communication service mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
Organization: CENELEC
Year: 2011
Status: Active
EN IEC 60077-4
Title: Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60077-5
Title: Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
Organization: CENELEC
Year: 2019
Status: Active
EN 50131-13
Title: Alarm systems - Intrusion and hold-up systems - Part 13: Pyrotechnic Obscuration Security Devices
Organization: CENELEC
Year: 2020
Status: Active
EN 50212
Title: Connectors for thermoelectric sensors
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62788-6-2
Title: Measurement procedures for materials used in photovoltaic modules - Part 6-2: General tests - Moisture permeation testing of polymeric materials
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62984-1
Title: High-temperature secondary batteries - Part 1: General requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61643-331
Title: Components for low-voltage surge protection - Part 331: Performance requirements and test methods for metal oxide varistors (MOV)
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62960
Title: Dependability reviews during the life cycle
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62788-5-1
Title: Measurement procedures for materials used in photovoltaic modules - Part 5-1: Edge seals - Suggested test methods for use with edge seal materials
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60034-2-3
Title: Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60704-2-8
Title: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61108-5
Title: Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 5: BeiDou navigation satellite system (BDS) - Receiver equipment - Performance r...
Organization: CENELEC
Year: 2020
Status: Active
EN 61482-2
Title: Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements
Organization: CENELEC
Year: 2020
Status: Active
PREN 50288-13-1
Title: Multi-element metallic cables used in analogue and digital communication and control - Part 13-1: Sectional specification for outer screened cables characterised up to 2000 MHz - Horizontal and bui...
Organization: CENELEC
Year: 2020
Status: Pending
PREN 50288-12-2
Title: Multi-element metallic cables used in analogue and digital communication and control - Part 12-2: Sectional specification for screened cables characterised from 1 MHz up to 2000 MHz - Work Area cables
Organization: CENELEC
Year: 2020
Status: Pending
EN 62852
Title: Connectors for DC-application in photovoltaic systems - Safety requirements and tests
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 62446-2
Title: Photovoltaic (PV) systems - Requirements for testing, documentation and maintenance - Part 2: Grid connected systems - Maintenance of PV systems
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61788-7
Title: Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63172
Title: Electrical accessories - Methodology for determining the energy efficiency class of electrical accessories
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60695-1-12
Title: Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
Organization: CENELEC
Year: 2020
Status: Active
PREN 50288-13-2
Title: Multi-element metallic cables used in analogue and digital communication and control - Part 13-2: Sectional specification for outer screened cables characterised from 1 MHz up to 2000 MHz - Work Ar...
Organization: CENELEC
Year: 2020
Status: Pending
EN IEC 62610-6
Title: Mechanical structures for electrical and electronic equipment - Thermal management for cabinets in accordance with IEC 60297 and IEC 60917 series - Part 6: Air recirculation and bypass of indoor ca...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61788-4
Title: Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61163-2
Title: Reliability stress screening - Part 2: Components
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60730-2-11
Title: Automatic electrical controls - Part 2-11: Particular requirements for energy regulators
Organization: CENELEC
Year: 2020
Status: Active
EN 60794-1-21
Title: Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 60730-2-7
Title: Automatic electrical controls - Part 2-7: Particular requirements for timers and time switches
Organization: CENELEC
Year: 2020
Status: Active
EN 62552-1
Title: Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements
Organization: CENELEC
Year: 2020
Status: Active
EN 62552-2
Title: Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements
Organization: CENELEC
Year: 2020
Status: Active
EN 62552-3
Title: Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume
Organization: CENELEC
Year: 2020
Status: Active
EN 62752
Title: In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
Organization: CENELEC
Year: 2016
Status: Active
EN IEC 63093-3
Title: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 3: Half pot-cores made of ferrite for inductive proximity switches
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62386-105
Title: Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware Transfer
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63093-2
Title: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Pot-cores for use in telecommunications, power supply, and filter applications
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62024-2
Title: High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63056
Title: Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63008
Title: Household and similar electrical appliances - Accessibility of control elements, doors, lids, drawers and handles
Organization: CENELEC
Year: 2020
Status: Active
EN 50708-3-1
Title: Power transformers - Additional European requirements: Part 3-1 Large power transformer - General requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60667-3-1
Title: Vulcanized fibre for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Flat sheets
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61757-1-1
Title: Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings
Organization: CENELEC
Year: 2020
Status: Active
EN 50708-1-1
Title: Power transformers - Additional European requirements: Part 1- 1: Common part - General requirements
Organization: CENELEC
Year: 2020
Status: Active
EN 50708-2-1
Title: Power transformers - Additional European requirements: Part 2- 1 Medium power transformer - General requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61010-2-081
Title: Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61010-2-010
Title: Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
Organization: CENELEC
Year: 2020
Status: Active
EN 55035
Title: Electromagnetic compatibility of multimedia equipment - Immunity requirements
Organization: CENELEC
Year: 2017
Status: Active
EN 60335-2-6
Title: Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 61754-35
Title: Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 35: Type LSHE connector family for harsh environments
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61753-061-2
Title: Fibre optic interconnecting devices and passive components - Performance standard - Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C - Controlle...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60667-1
Title: Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61076-8-101
Title: Connectors for electrical and electronic equipment - Product requirements - Part 8-101: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed con...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61076-8-102
Title: Connectors for electrical and electronic equipment - Product requirements - Part 8-102: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed con...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60282-1
Title: High-voltage fuses - Part 1: Current-limiting fuses
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62933-5-2
Title: Electrical energy storage (EES) systems - Part 5-2: Safety requirements for grid-integrated EES systems - Electrochemical-based systems
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61076-8-100
Title: Connectors for electrical and electronic equipment - Product requirements - Part 8-100: Power connectors - Detail specification for 2-pole or 3-pole power plus 2-pole signal shielded and sealed con...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62984-3
Title: High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63171-1
Title: Connectors for electrical and electronic equipment - Part 1: Detail specification for two-way, shielded or unshielded, free and fixed connectors - Mechanical mating information, pin assignment and ...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60352-3
Title: Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62343-3-3
Title: Dynamic modules - Part 3-3: Performance specification templates - Wavelength selective switches
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60282-4
Title: High-voltage fuses - Part 4: Additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60519-1
Title: Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61977
Title: Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic specification
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63132-2
Title: Guidance for installation procedures and tolerances of hydroelectric machines - Part 2: Vertical generators
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60401-1
Title: Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61960-4
Title: Secondary cells and batteries containing alkaline or other non-acid electrolytes - Secondary lithium cells and batteries for portable applications - Part 4: Coin secondary lithium cells, and batter...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63132-1
Title: Guidance for installation procedures and tolerances of hydroelectric machines - Part 1: General aspects
Organization: CENELEC
Year: 2020
Status: Active
CLC/TS 50707
Title: Clothes washing machines and washer-dryers for household and similar use - Method for the determination of temperature inside the laundry load
Organization: CENELEC
Year: 2020
Status: Active
EN 50131-1
Title: Alarm systems - Intrusion and hold-up systems Part 1: System requirements
Organization: CENELEC
Year: 2006
Status: Active
EN IEC 60730-2-9
Title: Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 61189-5-504
Title: Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-504: General test methods for materials and assemblies - Process ionic contaminatio...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63093-9
Title: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 9: Planar cores
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63129
Title: Determination of inrush current characteristics of lighting products
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63093-1
Title: Ferrite cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60895
Title: Live working - Conductive clothing
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61400-6
Title: Wind energy generation systems - Part 6: Tower and foundation design requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62788-1-7
Title: Measurement procedures for materials used in photovoltaic modules - Part 1-7: Encapsulants - Test procedure of optical durability
Organization: CENELEC
Year: 2020
Status: Active
CLC/TS 50654-2
Title: HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 2: Parameter Lists
Organization: CENELEC
Year: 2020
Status: Active
CLC/TS 50654-1
Title: HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1: Guidelines
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62056-8-8
Title: Electricity metering data exchange - The DLMS/COSEM suite - Part 8-8: Communication profile for ISO/IEC 14908 series networks
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60034-5
Title: Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62282-2-100
Title: Fuel cell technologies - Part 2-100: Fuel cell modules - Safety
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-71
Title: Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61968-1
Title: Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture and general recommendations
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63155
Title: Guidelines for the measurement method of power durability for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) applications
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-72
Title: Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62149-11
Title: Fibre optic active components and devices - Performance standards - Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60519-8
Title: Safety in installations for electroheating and electromagnetic processing - Part 8: Particular requirements for electroslag remelting furnaces
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60565-1
Title: Underwater acoustics - Hydrophones - Calibration of hydrophones - Part 1: Procedures for free-field calibration of hydrophones
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61300-3-55
Title: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-55: Examinations and measurements - Polarisation extinction ratio and keying accuracy of ...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-61
Title: Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63132-4
Title: Guidance for installation procedures and tolerances of hydroelectric machines - Part 4: Vertical Kaplan or propeller turbines
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62841-3-9
Title: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 60076-22-7
Title: Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62351-8
Title: Power systems management and associated information exchange - Data and communications security - Part 8: Role-based access control for power system management
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60721-3-0
Title: Classification of environmental conditions - Part 3-0: Classification of groups of environmental parameters and their severities - Introduction
Organization: CENELEC
Year: 2020
Status: Active
EN 62745
Title: Safety of machinery - Requirements for cableless control systems of machinery
Organization: CENELEC
Year: 2017
Status: Active
EN IEC 60317-0-4
Title: Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61631
Title: Test method for the mechanical strength of cores made of magnetic oxides
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63132-3
Title: Guidance for installation procedures and tolerances of hydroelectric machines - Part 3: Vertical Francis turbines or pump-turbines
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60667-2
Title: Vulcanized fibre for electrical purposes - Part 2: Methods of test
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62496-4-214
Title: Optical circuit boards - Part 4-214: Interface standards - Terminated waveguide OCB assembly using a single-row thirty-two-channel symmetric PMT connector
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61643-341
Title: Components for low-voltage surge protection - Part 341: Performance requirements and test circuits for thyristor surge suppressors (TSS)
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62384
Title: DC or AC supplied electronic controlgear for LED modules - Performance requirements
Organization: CENELEC
Year: 2020
Status: Active
CLC/TS 50238-2
Title: Railway applications - Compatibility between rolling stock and train detection systems - Part 2: Compatibility with track circuits
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62938
Title: Photovoltaic (PV) modules - Non-uniform snow load testing
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60045-1
Title: Steam turbines - Part 1: Specifications
Organization: CENELEC
Year: 2020
Status: Active
EN 50174-1
Title: Information technology - Cabling installation - Part 1: Installation specification and quality assurance
Organization: CENELEC
Year: 2018
Status: Active
EN IEC 60664-1
Title: Insulation coordination for equipment within low-voltage supply systems - Part 1: Principles, requirements and tests
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63045
Title: Ultrasonics - Non-focusing short pressure pulse sources including ballistic pressure pulse sources - Characteristics of fields
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61169-61
Title: Radio-frequency connectors - Part 61: Sectional specification for RF coaxial connectors with 9,5 mm inner diameter of outer conductor, quick lock coupling, series Q4.1-9.5
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63182-1
Title: Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 1: General specification
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61169-63
Title: Radio-frequency connectors - Part 63: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 75 ohms (...
Organization: CENELEC
Year: 2020
Status: Active
EN 62788-1-6
Title: Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate
Organization: CENELEC
Year: 2017
Status: Active
EN IEC 60034-3
Title: Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
Organization: CENELEC
Year: 2020
Status: Active
CLC/TS 51643-32
Title: Low-voltage surge protective devices - Part 32: Surge protective devices connected to the DC side of photovoltaic installations - Selection and application principles
Organization: CENELEC
Year: 2020
Status: Active
EN 50600-4-6
Title: Information technology - Data centre facilities and infrastructures - Part 4-6: Energy Reuse Factor
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60512-9-5
Title: Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-27-4
Title: Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-27-2
Title: Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-17
Title: Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-25
Title: Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-18
Title: Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-27-1
Title: Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61969-3
Title: Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-0-2
Title: Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-62
Title: Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-12
Title: Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60352-4
Title: Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63181-2
Title: LCD multi-screen display terminals - Part 2: Measuring methods
Organization: CENELEC
Year: 2020
Status: Active
EN 50128
Title: Railway applications - Communication, signalling and processing systems - Software for railway control and protection systems
Organization: CENELEC
Year: 2020
Status: Inactive
EN IEC 62541-12
Title: OPC unified architecture - Part 12: Discovery and global services
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62714-4
Title: Engineering data exchange format for use in industrial automation systems engineering - Automation markup language - Part 4: Logic
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61701
Title: Photovoltaic (PV) modules - Salt mist corrosion testing
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-7
Title: OPC unified architecture - Part 7: Profiles
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60779
Title: Installations for electroheating and electromagnetic processing - Test methods for electroslag remelting furnaces
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-8
Title: OPC Unified Architecture - Part 8: Data Access
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-9
Title: OPC unified architecture - Part 9: Alarms and conditions
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63169
Title: Electrical household and similar cooling and freezing appliances - Food preservation
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61400-5
Title: Wind energy generation systems - Part 5: Wind turbine blades
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61788-26
Title: Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-13
Title: OPC Unified Architecture - Part 13: Aggregates
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-0-6
Title: Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-70-2
Title: Specifications for particular types of winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, bare or enamelled round copper wire, temperature index 155
Organization: CENELEC
Year: 2020
Status: Active
EN 50131-2-4
Title: Alarm systems - Intrusion and hold-up systems - Part 2-4: Requirements for combined passive infrared and microwave detectors
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-82
Title: Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60317-60-2
Title: Specifications for particular types of winding wires - Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62614-1
Title: Fibre optics - Multimode launch conditions - Part 1: Launch condition requirements for measuring multimode attenuation
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62656-8
Title: Standardized product ontology register and transfer by data parcels - Part 8: Web service interface for data parcels
Organization: CENELEC
Year: 2020
Status: Active
EN 62366-1
Title: Medical devices - Part 1: Application of usability engineering to medical devices
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 62645
Title: Nuclear power plants - Instrumentation, control and electrical power systems - Cybersecurity requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63067
Title: Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60794-1-215
Title: Optical fibre cables - Part 1-215: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable external freezing test, Method F15
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61753-1
Title: Fibre optic interconnecting devices and passive components - Performance standard - Part 1: General and guidance
Organization: CENELEC
Year: 2018
Status: Active
EN IEC 60317-60-1
Title: Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60296
Title: Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63034
Title: Microspeakers
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63180
Title: Methods of measurement and declaration of the detection range of detectors - Passive infrared detectors for major and minor motion detection
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62435-8
Title: Electronic components - Long-term storage of electronic semiconductor devices - Part 8: Passive electronic devices
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61804-3
Title: Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 3: EDDL syntax and semantics
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61804-5
Title: Devices and intergration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 5: EDDL Builtin library
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60068-3-7
Title: Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load)
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60263
Title: Scales and sizes for plotting frequency characteristics and polar diagrams
Organization: CENELEC
Year: 2020
Status: Active
EN 50440
Title: Efficiency of domestic electrical storage water heaters and testing methods
Organization: CENELEC
Year: 2015
Status: Active
EN 50193-2-2
Title: Electric instantaneous water heaters - Part 2-2: Performance requirements - Single point of use electric instantaneous showers - Efficiency
Organization: CENELEC
Year: 2016
Status: Active
EN IEC 62443-3-2
Title: Security for industrial automation and control systems - Part 3-2: Security risk assessment for system design
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-11
Title: OPC Unified Architecture - Part 11: Historical Access
Organization: CENELEC
Year: 2020
Status: Active
EN 60601-1-12
Title: Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical...
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 61804-4
Title: Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) - Part 4: EDD interpretation
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-10
Title: OPC Unified Architecture - Part 10: Programs
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61007
Title: Transformers and inductors for use in electronic and telecommunication equipment - Measuring methods and test procedures
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63252
Title: Energy consumption of vending machines
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60749-41
Title: Semiconductor devices - Mechanical and climatic test methods - Part 41: Standard reliability testing methods of non-volatile memory devices
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-3
Title: OPC Unified Architecture - Part 3: Address Space Model
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-14
Title: OPC unified architecture - Part 14: PubSub
Organization: CENELEC
Year: 2020
Status: Active
EN 50193-1
Title: Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
Organization: CENELEC
Year: 2016
Status: Active
EN 60601-1-9
Title: Medical electrical equipment - Part 1-9: General requirements for basic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design
Organization: CENELEC
Year: 2008
Status: Active
EN IEC 62859
Title: Nuclear power plants - Instrumentation and control systems - Requirements for coordinating safety and cybersecurity
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61076-2-012
Title: Connectors for electrical and electronic equipment - Product Requirements - Part 2-012: Circular connectors - Detail specification for connectors with inner push-pull locking based on M12 connector...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61400-27-1
Title: Wind energy generation systems - Part 27-1: Electrical simulation models - Generic models
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60747-5-5
Title: Semiconductor devices - Part 5-5: Optoelectronic devices - Photocouplers
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63103
Title: Lighting equipment - Non-active mode power measurement
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61757-4-3
Title: Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60352-5
Title: Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61280-4-5
Title: Fibre-optic communication subsystem test procedures - Part 4-5: Installed cabling plant - Attenuation measurement of MPO terminated fibre optic cabling plant using test equipment with MPO interfaces
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61000-6-8
Title: Electromagnetic compatibility (EMC) - Part 6-8: Generic standards - Emission standard for professional equipment in commercial and light-industrial locations
Organization: CENELEC
Year: 2020
Status: Active
PREN 50065-2-3
Title: Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communicating equipment operating in the range of frequencie...
Organization: CENELEC
Year: 2020
Status: Pending
EN IEC 60839-11-5
Title: Alarm and electronic security systems - Part 11-5: Electronic access control systems - Open Supervised Device Protocol (OSDP)
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-5
Title: OPC Unified Architecture - Part 5: Information Model
Organization: CENELEC
Year: 2020
Status: Active
EN 60747-16-5
Title: Semiconductor devices - Part 16-5: Microwave integrated circuits - Oscillators
Organization: CENELEC
Year: 2013
Status: Active
EN IEC 62541-4
Title: OPC Unified Architecture - Part 4: Services
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62541-6
Title: OPC Unified Architecture - Part 6: Mappings
Organization: CENELEC
Year: 2020
Status: Active
EN 60335-2-3
Title: Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons
Organization: CENELEC
Year: 2016
Status: Active
EN IEC 60749-30
Title: Semiconductor devices - Mechanical and climatic test methods - Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62271-108
Title: High-voltage switchgear and controlgear - Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages above 52 kV
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61968-5
Title: Application integration at electric utilities - System interfaces for distribution management - Part 5: Distributed energy optimization
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61496-1
Title: Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61496-2
Title: Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60076-24
Title: Power transformers - Part 24: Specification of voltage regulating distribution transformers (VRDT)
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60471
Title: Clevis and tongue couplings of string insulator units - Dimensions
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61400-27-2
Title: Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62790
Title: Junction boxes for photovoltaic modules - Safety requirements and tests
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62966-2
Title: Mechanical structures for electrical and electronic equipment - Aisle containment for IT cabinets - Part 2: Details of air flow, air separation and air cooling requirements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61169-1-4
Title: Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61760-1
Title: Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs)
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63041-3
Title: Piezoelectric sensors - Part 3: Physical sensors
Organization: CENELEC
Year: 2020
Status: Active
CLC IEC/TR 63201
Title: Low-voltage switchgear and controlgear - Guidance for the development of embedded software
Organization: CENELEC
Year: 2020
Status: Active
CLC/IEC TR 63216
Title: Low-voltage switchgear and controlgear - Electromagnetic compatibility assessment for switchgear and controlgear and their assemblies
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62149-5
Title: Fibre optic active components and devices - Performance standards - Part 5: ATM-PON transceivers with LD driver and CDR ICs
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60749-15
Title: Semiconductor devices - Mechanical and climatic test methods - Part 15: Resistance to soldering temperature for through-hole mounted devices
Organization: CENELEC
Year: 2020
Status: Active
CLC IEC/TR 61511-4
Title: Functional safety - Safety instrumented systems for the process industry sector - Part 4: Explanation and rationale for changes in IEC 61511-1 from Edition 1 to Edition 2
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62271-104
Title: High-voltage switchgear and controlgear - Part 104: Alternating current switches for rated voltages higher than 52 kV
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62003
Title: Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for electromagnetic compatibility testing
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62890
Title: Industrial-process measurement, control and automation - Life-cycle-management for systems and components
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60601-2-20
Title: Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and essential performance of infant transport incubators
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60120
Title: Ball and socket couplings of string insulator units - Dimensions
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61300-2-56
Title: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-56: Tests - Wind resistance of mounted housing
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60749-20
Title: Semiconductor devices - Mechanical and climatic test methods - Part 20: Resistance of plastic encapsulated SMDs to the combined effect of moisture and soldering heat
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60372
Title: Locking devices for ball and socket couplings of string insulator units - Dimensions and tests
Organization: CENELEC
Year: 2020
Status: Active
EN 60034-18-42
Title: Rotating electrical machines - Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters - Qualification tests
Organization: CENELEC
Year: 2017
Status: Active
EN 50546
Title: Railway applications - Rolling Stock - Three-phase shore (external) supply system for rail vehicles and its connectors
Organization: CENELEC
Year: 2020
Status: Active
EN 61850-7-1
Title: Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models
Organization: CENELEC
Year: 2011
Status: Active
EN IEC 62841-2-6
Title: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers
Organization: CENELEC
Year: 2020
Status: Active
EN 62841-2-11
Title: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-11: Particular requirements for hand-held reciprocating saws
Organization: CENELEC
Year: 2016
Status: Active
EN IEC 62828-4
Title: Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62828-5
Title: Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61290-1-1
Title: Optical amplifiers - Test methods - Part 1-1: Power and gain parameters - Optical spectrum analyzer method
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62793
Title: Thunderstorm warning systems - Protection against lightning
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61753-071-02
Title: Fibre optic interconnecting devices and passive components - Performance standard - Part 071-02: Non-connectorized single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controll...
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60601-2-22
Title: Medical electrical equipment - Part 2-22: Particular requirements for basic safety and essential performance of surgical, cosmetic, therapeutic and diagnostic laser equipment
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61076-2-114
Title: Connectors for electrical and electronic equipment - Product requirements - Part 2-114: Circular connectors - Detail specification for connectors with M8 screw-locking with power contacts and signa...
Organization: CENELEC
Year: 2020
Status: Active
EN 60127-3
Title: Miniature fuses - Part 3: Sub-miniature fuse-links
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 60335-2-43
Title: Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails
Organization: CENELEC
Year: 2003
Status: Active
EN IEC 61000-4-3
Title: Electromagnetic compatibility (EMC) - Part 4-3 : Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
Organization: CENELEC
Year: 2020
Status: Active
EN 60268-7
Title: Sound system equipment - Part 7: Headphones and earphones
Organization: CENELEC
Year: 2011
Status: Active
EN 61303
Title: Medical electrical equipment Radionuclide calibrators Particular methods for describing performance
Organization: CENELEC
Year: 1995
Status: Active
EN IEC 60747-17
Title: Semiconductor devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60904-9
Title: Photovoltaic devices - Part 9: Classification of solar simulator characteristics
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60904-10
Title: Photovoltaic devices - Part 10: Methods of linear dependence and linearity measurements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62769-115-2
Title: Field device integration (FDI) - Part 115-2: Profiles - Modbus- RTU
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60332-3-10
Title: Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
Organization: CENELEC
Year: 2018
Status: Active
EN IEC 61837-2
Title: Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 2: Ceramic enclosures
Organization: CENELEC
Year: 2018
Status: Active
EN IEC 60268-16
Title: Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60904-1
Title: Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60645-3
Title: Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60794-6-30
Title: Optical fibre cables - Part 6-30: Indoor-outdoor cables - Family specification for weatherised indoor cables
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 63182-2
Title: Magnetic powder cores - Guidelines on dimensions and the limits of surface irregularities - Part 2: Ring-cores
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60794-6-20
Title: Optical fibre cables - Part 6-20: Indoor-outdoor cables - Family specification for flame retardant outdoor cables
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60794-6
Title: Optical fibre cables - Part 6: Indoor-outdoor cables - Sectional specification for indoor-outdoor cables
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60794-6-10
Title: Optical fibre cables - Part 6-10: Indoor-outdoor cables - Family specification for universal indoor-outdoor cables
Organization: CENELEC
Year: 2020
Status: Active
EN 50342-4
Title: Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy vehicles
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60603-7
Title: Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors
Organization: CENELEC
Year: 2020
Status: Active
CLC/TS 50136-9
Title: Alarm systems - Alarm transmission systems and equipment - Part 9: Requirements for common protocol for alarm transmission using the Internet Protocol (IP)
Organization: CENELEC
Year: 2020
Status: Active
EN 50397-1
Title: Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 1: Covered conductors
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61400-21-1
Title: Wind energy generation systems - Part 21-1: Measurement and assessment of electrical characteristics - Wind turbines
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61400-3-1
Title: Wind energy generation systems - Part 3-1: Design requirements for fixed offshore wind turbines
Organization: CENELEC
Year: 2019
Status: Active
EN 62788-1-4
Title: Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellown...
Organization: CENELEC
Year: 2016
Status: Active
PREN 50117-9-1
Title: Coaxial cables - Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz - 1 000 MHz
Organization: CENELEC
Year: 2020
Status: Pending
EN IEC 63073-1
Title: Dedicated radionuclide imaging devices - Characteristics and test conditions - Part 1: Cardiac SPECT
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62351-6
Title: Power systems management and associated information exchange - Data and communications security - Part 6: Security for IEC 61850
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62832-1
Title: Industrial-process measurement, control and automation - Digital factory framework - Part 1: General principles
Organization: CENELEC
Year: 2020
Status: Active
EN 55032
Title: Electromagnetic compatibility of multimedia equipment - Emission Requirements
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 62832-3
Title: Industrial-process measurement, control and automation - Digital factory framework - Part 3: Application of Digital Factory for life cycle management of production systems
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61803
Title: Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60112
Title: Method for the determination of the proof and the comparative tracking indices of solid insulating materials
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60704-2-17
Title: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-17: Particular requirements for dry-cleaning robots
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62832-2
Title: Industrial-process measurement, control and automation - Digital factory framework - Part 2: Model elements
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 62566-2
Title: Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmed integrated circuits - Part 2: HDL-programmed integrated circuits for systems performin...
Organization: CENELEC
Year: 2020
Status: Active
CLC/TS 50703-2
Title: Lightning Protection System Components (LPSC) - Part 2: Specific testing requirements for LPS components used in explosive atmospheres
Organization: CENELEC
Year: 2020
Status: Active
EN 60332-1-2
Title: Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
Organization: CENELEC
Year: 2004
Status: Active
FPREN 60335-2-86\PRAA
Title: Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines
Organization: CENELEC
Year: 2020
Status: Pending
EN 50632-2-6
Title: Electric motor-operated tools - dust measurement procedure - Part 2-6: Particular requirements for hammers
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 60704-2-1
Title: Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for dry vacuum cleaners
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60384-13
Title: Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil DC capacitors
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61810-4
Title: Electromechanical elementary relays - Part 4: General and safety requirements for reed relays
Organization: CENELEC
Year: 2020
Status: Active
PREN 50288-7
Title: Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables
Organization: CENELEC
Year: 2020
Status: Pending
EN 61850-4
Title: Communication networks and systems for power utility automation - Part 4: System and project management
Organization: CENELEC
Year: 2011
Status: Active
CLC/TR 45550
Title: Definitions related to material efficiency
Organization: CENELEC
Year: 2020
Status: Active
PREN 50286
Title: Electrical insulating protective clothing for low-voltage installations
Organization: CENELEC
Year: 2020
Status: Pending
EN IEC 61228
Title: Fluorescent ultraviolet lamps used for tanning - Measurement and specification method
Organization: CENELEC
Year: 2020
Status: Active
EN 50193-2-1
Title: Electric instantaneous water heaters - Part 2-1: Methods for measuring the performance - Multifunctional electric instantaneous water heaters
Organization: CENELEC
Year: 2016
Status: Active
EN IEC 63193
Title: Lead-acid batteries for propulsion power of lightweight vehicles - General requirements and methods of test
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60794-2-31
Title: Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60794-2-11
Title: Optical fibre cables - Part 2-11: Indoor cables - Detailed specification for simplex and duplex cables for use in premises cabling
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60794-2-21
Title: Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
Organization: CENELEC
Year: 2019
Status: Active
EN 60456
Title: Clothes washing machines for household use - Methods for measuring the performance
Organization: CENELEC
Year: 2016
Status: Active
EN 61347-1
Title: Lamp controlgear - Part 1: General and safety requirements
Organization: CENELEC
Year: 2015
Status: Active
EN IEC 61980-1
Title: Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60598-2-23
Title: Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for ELV light sources
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61083-3
Title: Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 62325-451-10
Title: Framework for energy market communications - Part 451-10: Profiles for Energy Consumption Data ("My Energy Data")
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61010-2-202
Title: Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60172
Title: Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 62485-5
Title: Safety requirements for secondary batteries and battery installations - Part 5: Safe operation of stationary lithium ion batteries
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60268-22
Title: Sound system equipment - Part 22: Electrical and mechanical measurements on transducers
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 61851-25
Title: Electric vehicle conductive charging system - Part 25: DC EV supply equipment where protection relies on electrical separation
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60522-1
Title: Medical electrical equipment - Diagnostic X-rays - Part 1: Determination of quality equivalent filtration and permanent filtration
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 63185
Title: Measurement of the complex permittivity for low-loss dielectric substrates balanced-type circular disk resonator method
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 62474
Title: Material declaration for products of and for the electrotechnical industry
Organization: CENELEC
Year: 2019
Status: Active
EN IEC 60675-2
Title: Household electric direct-acting room heaters - Methods for measuring performance - Part 2: Additional provisions for the measurement of the radiant factor
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60675-3
Title: Household electric direct-acting room heaters - Methods for measuring performance - Part 3: Additional provisions for the measurement of the radiation efficiency
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 62435-7
Title: Electronic components - Long-term storage of electronic semiconductor devices - Part 7: Micro-electromechanical devices
Organization: CENELEC
Year: 2021
Status: Active
EN 62841-3-12/PRAA
Title: Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-12: Particular requirements for transportable threading machines
Organization: CENELEC
Year: 2021
Status: Pending
PREN 50411-3-1
Title: Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G
Organization: CENELEC
Year: 2021
Status: Pending
EN IEC 61300-3-30
Title: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Endface geometry of rectangular ferrule
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60336
Title: Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61300-3-53
Title: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based...
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61058-2-1
Title: Switches for appliances - Part 2-1: Particular requirements for cord switches
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61058-2-4
Title: Switches for appliances - Part 2-4: Particular requirements for independently mounted switches
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61058-2-5
Title: Switches for appliances - Part 2-5: Particular requirements for change-over selectors
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60352-7
Title: Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61828
Title: Ultrasonics - Transducers - Definitions and measurement methods regarding focusing for the transmitted fields
Organization: CENELEC
Year: 2021
Status: Active
EN 50488
Title: Railway applications - Fixed installations - Electrical protective measures for working on or near an overhead contact line system and/or its associated return circuit
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 62485-6
Title: Safety requirements for secondary batteries and battery installations - Part 6: Safe operation of lithium-ion batteries in traction applications
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60947-1
Title: Low-voltage switchgear and controlgear - Part 1: General rules
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60947-3
Title: Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61563
Title: Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 63115-2
Title: Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-metal hydride cells and batteries for use in industrial applications - Part 2: Safety
Organization: CENELEC
Year: 2021
Status: Active
EN 50696
Title: Contact Interface for Automated Connection Device
Organization: CENELEC
Year: 2021
Status: Active
EN 60825-1
Title: Safety of laser products - Part 1: Equipment classification and requirements
Organization: CENELEC
Year: 2014
Status: Active
EN IEC 61800-1
Title: Adjustable speed electrical power drive systems - Part 1: General requirements - Rating specifications for low voltage adjustable speed DC power drive systems
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61169-15
Title: Radio-frequency connectors - Part 15: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 4,13 mm (0,163 in) with threaded coupling - Characteristic impedance 50 ...
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61169-65
Title: Radio-frequency connectors - Part 65: Sectional specification for RF coaxial connectors, 1,35 mm inner diameter of outer conductor, with screw-coupling, characteristic impedance 50 O
Organization: CENELEC
Year: 2021
Status: Active
CLC/TS 50131-5-1
Title: Alarm systems - Intrusion systems - Part 5-1: Interconnections - Requirements for wired Interconnection for I&HAS equipments located in supervised premises
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60433
Title: Insulators for overhead lines with a nominal voltage above 1 000 V - Ceramic insulators for AC systems - Characteristics of insulator units of the long rod type
Organization: CENELEC
Year: 2021
Status: Active
EN 50699
Title: Recurrent Test of Electrical Equipment
Organization: CENELEC
Year: 2020
Status: Active
EN IEC 60794-1-2
Title: Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60794-3-12
Title: Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
Organization: CENELEC
Year: 2021
Status: Active
EN 60601-1-3
Title: Medical electrical equipment - Part 1-3: General requirements for basic safety and essential performance - Collateral Standard: Radiation protection in diagnostic X-ray equipment
Organization: CENELEC
Year: 2008
Status: Active
EN IEC 60076-22-6
Title: Power transformers - Part 22-6: Power transformer and reactor fittings - Electric fans for transformers
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60076-22-5
Title: Power transformers - Part 22-5: Power transformer and reactor fittings - Electric pumps for transformers
Organization: CENELEC
Year: 2021
Status: Active
PREN IEC 60598-2-20/PRAA
Title: Luminaires - Part 2-20: Particular requirements - Lighting chains
Organization: CENELEC
Year: 2021
Status: Pending
EN IEC 61760-3
Title: Surface mounting technology - Part 3: Standard method for the specification of components for through-hole reflow (THR) soldering
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61189-5-502
Title: Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-502: General test methods for materials and assemblies - Surface insulation resista...
Organization: CENELEC
Year: 2021
Status: Active
PREN 50176
Title: Automatic electrostatic application systems for ignitable coating materials - Safety requirements
Organization: CENELEC
Year: 2021
Status: Pending
EN IEC 62787
Title: Concentrator photovoltaic (CPV) solar cells and cell on carrier (CoC) assemblies - Qualification
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 60958-5
Title: Digital audio interface - Part 5: Consumer application enhancement
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61189-5-601
Title: Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-601: General test methods for materials and assemblies - Reflow soldering ability ...
Organization: CENELEC
Year: 2021
Status: Active
EN IEC 61188-6-2
Title: Circuit boards and circuit board assemblies - Design and use - Part 6-2: Land pattern design - Description of land pattern for the most common surface mounted components (SMD)
Organization: CENELEC
Year: 2021
Status: Active
EN 60601-1-2
Title: Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
Organization: CENELEC
Year: 2015
Status: Active


Advertisement